Model Pulse Jet Engine Test!

Рет қаралды 205,137

2 ай бұрын

►PulseJet Engine Model: bit.ly/3vMoPZd
►Stirlingkit Must-have Jet Engine: bit.ly/3xzGunk
---------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90

Пікірлер: 381

@haukesattler446 2 ай бұрын

Fuel to noise converter.

@GioJonnhyK 2 ай бұрын

😂😂😂😂😂❤

@nuherbleath461 2 ай бұрын

Colin furze built a massive pulsejet and aimed it at France

@waybous 2 ай бұрын

FTNC Fuck the noise complaint.

@davidl6566 2 ай бұрын

The losses are in the form of thrust

@ametti000 2 ай бұрын

Fuel to heat and noise converter with residual thrust as a by-product...

@gabrielecossettini2923 2 ай бұрын

J: "immagine what a full size pulse jet engine can do" Colin furze: "hold my safety tie"

@unclejim007 2 ай бұрын

I think Colin has already made one of these. Edit: yes he has made a full size one

@Chester200100 2 ай бұрын

@@unclejim007 or two or three or i honestly lost count

@wardog6667 2 ай бұрын

@@unclejim007and drove it himself

@unclejim007 2 ай бұрын

@@wardog6667 I remember that video.

@ISOSAILING 2 ай бұрын

fart at france!!

@foxwhiskey 2 ай бұрын

The ideal engine for the backyard. All neighbours will love you !! 😂😅 I've tried it once or twice. Great effect !

@AkkarisFox 2 ай бұрын

Brings me back to the days of pulse jet engines on colinfurze's channel

@mozer30 2 ай бұрын

Have you seen the stuff Robert Maddox has been up to with pulse jets? kzfaq.info/get/bejne/nad7mM6Z0rq2kY0.htmlsi=oV9qxcVvwVQLA4yB

@LurifaxDK 2 ай бұрын

I'm actually amazed that he isn't hearing impaired with all the times he has started a pulsejet in his shed.

@snjert8406 2 ай бұрын

@@LurifaxDK Maybe he is haha

@Felenari 2 ай бұрын

The loudest and highest velocity fart ever measured.

@pizzainc.1465 Ай бұрын

And yet it does not even compare to the sheer chaos that would be unleashed if someone were to eat all the Taco Bell currently in existence

@johno9507 Ай бұрын

We started one of these in an enclosed aircraft hanger and it sounded like 50 shotguns going off at once. Our boss came running in screaming his head off...but we couldn't hear him. 😂🇦🇺

@big0medium 2 ай бұрын

When I saw the title the first thing I thought was "poor neighbours". Good that you realised they are extremly loud on a beach!

@joshuamayr1682 2 ай бұрын

"simple base" pulls out a whole lab equipment rack xD

@future-matze-35 2 ай бұрын

😂

@MAXMMX 2 ай бұрын

3:53 to 3:58 The same sound that my father makes when he gets up in the early morning to go to the bathroom.

@jbuchana 2 ай бұрын

Back in the '80s I worked at a company that made model pulse jets, Curtis Dyna Products. They called them Dyna Jets. They were indeed *loud*. Hearing protection was a must. A university bought some of them from us to use as experimental sound sources in their experiments to sonically sterlize soil. I never heard how those experiments worked out.

@TheDamiensdad 2 ай бұрын

I still have two old dyna jets that were my grandpa’s. He used them on competition speed ships. Basically control line “planes”. I know one is complete but one is missing a few things.

@MalcolmCrabbe 2 ай бұрын

Remember going to Wings and Wheel every year back in the late 80's and seeing these strapped to a delta wing plane.. I think it was something like "ghost squadron" team that flew them... certainly were show stoppers, with everyone, including those in the beer tents stopping to watch them fly.. sadly complains from the old folks home some 2 mile away meant that they got banned from flying them as subsequent wings and wheels shows...

@Matthew.Morycinski 2 ай бұрын

This noise can sonically sterilize people no? 😉

@rollin18wheels 2 ай бұрын

I remember those very well. My dad did the whole RC aviation thing when I was a kid and I remember guys showing up at the RC airport with Dynajet powered planes and how astoundingly loud they were and how they would echo off of the tree line a mile away

@OttomanDrifter91 2 ай бұрын

'sonically sterilize soil'

@Chester200100 2 ай бұрын

Scale model of V1 when?

@adobehitler1945 2 ай бұрын

I support this 👍

@Chester200100 2 ай бұрын

@@adobehitler1945 What are you gonna fire this on? Your jewish neighbors backyard?

@Whiteytightys Ай бұрын

@@Chester200100 I don't think the creator of this channel is from Gaza...

@chadpm11 2 ай бұрын

We have lit a full scale of the eng that was used on the old buzz bomb used in the war back in the day, it will make your insides move in ways they never have and multiple layers of hearing protection is needed

@Slyd_Fox 2 ай бұрын

If anything could create a "brown note", I bet those could.

@chrisprobert6 2 ай бұрын

Bluddy marvellous. Way to go sir!

@LILMADERR23 2 ай бұрын

IM PUMPED! Definitely wanna see this power a long board with you on it!!

@menom7 2 ай бұрын

That was MASSIVELY COOL!!! 😊

@jcooper702 2 ай бұрын

Very cool! Thanks for sharing

@joeyginise6051 2 ай бұрын

Johnny's dabbling in some ADVANCED tech now!

@Francois_Dupont 2 ай бұрын

from 1930

@Chester200100 2 ай бұрын

Pulsejet is simpler than any combustion engine

@minnesotatomcat 2 ай бұрын

They’re about the simplest engine ever, they’ve been around a long long time.

@Smickster01 2 ай бұрын

errr, what?

@moehoward01 2 ай бұрын

@@Smickster01I suspect he was being sarcastic.

@edwardneal4819 2 ай бұрын

Pretty freakin cool bro!

@ethericbliss23 2 ай бұрын

Wow!! And here I always thought these things ran a little hot. lol. Nice job!! : )

@Patifone 2 ай бұрын

Крутой дядька, Михаилу мои слова благодарности и прибавка к карме за такого гостя!

@_Mav 2 ай бұрын

Looking forward to you installing it on the RC 4wd

@ExpressoMechanicTV 2 ай бұрын

The heat! I thought the was going to start melting!

@jbuchana 2 ай бұрын

We made pulse jets at a company i used to work at in the '80s (Curtis Dyna Products) If you ran them too long and kept them stationary with no fan blowing over them, the stainless steel tubing would burn right through.

@The_War_Pug 2 ай бұрын

@@jbuchana I have a question for you. I know that pulse jets are very fuel inefficient but does that change with size or does it have more to do with simply how much fuel and air are run through the combustion chamber?

@jbuchana 2 ай бұрын

@@The_War_Pug I'm not relly sure, we only made one size of engine.

@electr0maker436 2 ай бұрын

One minute in and the p*** bots are here already, youtube still has not found a solution apparently. Love your videos mate!

@MatiNOMafaka 2 ай бұрын

Don’t u want to answer a question “ what mood you wake up in? “ 😂

@hextremelydesirable1648 2 ай бұрын

I’m a bot. A bot to ask you why you’re not in crypto !

@thetoasterisonfire2080 2 ай бұрын

The problem is that they don't care. The comment bots make the numbers go up and therefore makes the investors happy.

@Codexionyx101 2 ай бұрын

@@thetoasterisonfire2080 Didn't someone build a spam comment removal program at some point?

@blahorgaslisk7763 2 ай бұрын

@@Codexionyx101 Yep that's been made. But I can't remember who I saw use them. They worked though, with some caveats.

@Dan-vq4pz 2 ай бұрын

Was buzzing so loud it knocked things off of my shelf, I feel you Johnny haaha

@andy36586 2 ай бұрын

I made the mistake of watching this video while listening to the radio.... even their songs were skipping

@Fluffberymoff Ай бұрын

My favorite type of jet!

@Shawnsteroz 2 ай бұрын

I run mine on LPG. its a bit bigger and made from stainless steel, but has no reed valves to worry about. the supports are unable to stop the thrust from moving it, so I need to sit a few bricks on it, but yours is amazing, esp the cherry red heat.

@wisdm5247 2 ай бұрын

It's way more fuel efficient than I expected. Given the amount of fuel you added to the tank, I was thinking it was too little. It barely moved as far as I could see.

@TheLtVoss 2 ай бұрын

And they cann basicly run on anything if you get it fine enough atomised so coal dust or heavy oil for example would work 😅

@wisdm5247 2 ай бұрын

@@TheLtVoss I guess the problem would be delivering solid stuff like that fast enough to sustain it running.

@TheLtVoss 2 ай бұрын

@@wisdm5247 well it is a challenge but in that case the Vibrations of the pulse jet could be beneficial

@wisdm5247 2 ай бұрын

@@TheLtVoss How would the vibrations be beneficial?

@ElTelBaby 2 ай бұрын

That was awesome...

@PAINFOOL13 2 ай бұрын

Way Cool Johnny 👍🏻

@JoeMarrant 2 ай бұрын

That. Is. Awesome.

@domenicozagari2443 Ай бұрын

We had one at work, it was the smoke machine for emergency exercises.

@patmcgrath90 2 ай бұрын

HA! We had one of these in auto shop in high school. Finally convinced the teacher to run it one day. Made so much noise, the principal came down to see what was going on. The auto shop was about the furthest classroom from his office.

@gamerboyredyt 2 ай бұрын

These things would make great tornado sirens 😅

@warningsystemsofohio1880 2 ай бұрын

i beg to differ

@gavriilk7440 2 ай бұрын

Και πάλι Μπράβο

@Mack_Dingo 2 ай бұрын

Can't wait to see a R/C V1.5 flying around

@alanhilder1883 2 ай бұрын

A V1 wasn't remotely controlled, it was autonomous. There are RC pulse jet powered planes around, though not many as there are too many noise complaints. ( Karen's everywhere )

@TTime685 2 ай бұрын

Robert Maddox would be proud of you

@seyittosun5690 Ай бұрын

Very good work done I was wondering about the rotor speed

@VEBASTOJohny 2 ай бұрын

Cool. What's the thrust???

@GeomancerHT 2 ай бұрын

2kg as per the seller... but this is a consumable toy, you can only fire it so many times, it's too expensive if you can only play with it so little and so little time each time, valves only last 1 minute... aluminium body will melt eventually...

@rasmus1600 2 ай бұрын

@@GeomancerHT The body is steel, the intake is aluminium. It usualy stays cool enough to not overheat. The reeds lives a hard life tho

@brothyr 2 ай бұрын

@@rasmus1600 by the color, it's stainless. Plain steel might rust on the inside and cause weird turbulence.

@antonfloor344 2 ай бұрын

It’s amazing how fast it got red hot😮

@nathanguyon7620 2 ай бұрын

Cool as heck, think a good addition would be a venturi at the tailpipe connected to a sheath to get some airflow over that chamber. For static use, anyway.

@ColonelXZ 2 ай бұрын

Nice. You should try making the rotating pulse engine next!

@cetindenizdemircan9148 2 ай бұрын

That would make a crazy siren.

@catchulater7483 2 ай бұрын

Best marshmallow cooler EVER!😂

@Jatinder_Singh_Jerry 2 ай бұрын

I Love This ❤️❤️❤️❤️❤️

@ErtsenPlayGames 2 ай бұрын

15y ago i build few super small ones , smallest one used 7.62 shell second one was 12g co2 bottle from asg (both needed sustained rly small amount of airflow to work- i used for that air pump from blood pressure monitor) ---- they were so loud that neighbours were annoyed when i turned them on

@MrGrimCarnage 2 ай бұрын

During WWII, the Nazis launched flying bombs, powered by pulsejet engines.....they were known as "Buzz Bombs".

@andreluydens2602 Ай бұрын

Might as well wait for them to arrive since you'd hear em since launch

@hamzahjfy8188 2 ай бұрын

3:38 the cameraman was shocked

@vincentdesjardins1354 2 ай бұрын

for a brief moment he deeply questioned his life choices

@Pyroteknikid 2 ай бұрын

I need one of these as a home security alarm.

@sempertard 2 ай бұрын

Made a valveless PJ out of titanium a few years back. It's about 38" long with a 6" combustion chamber. I use propane to fuel it. Much easier to start and with valveless PJs you throttle them way back. Anyway, I start it with a Campbell Hausfeld 20 gallon direct drive air compressor. You know, the REALLY loud obnoxious ones. At full throttle, the PJ is so loud it completely swamps out the air compressor, to the point where you can't even tell it's running. I can feel my chest cavity resonate with the jet. Yeah... They're loud.

@Nathan-el1tw 2 ай бұрын

This is awesome. What kind of thrust did it produce?

@ipsofattso4919 2 ай бұрын

amazing that it doesn't melt the stainless, but I suppose that if its flying then the air rush would cool the pipe

@phildavis1282 2 ай бұрын

That started well. I've seen others that were a pig to get going 👍

@TheLtVoss 2 ай бұрын

Mhm probably the fuel and that it is a vaved one

@DEV_XO 2 ай бұрын

More jet enjine videos!

@coreypuck3295 2 ай бұрын

That looks exactly like a Mercury outboard boat motor Reed valve. The Reed valves on these motors are on the crankshaft journals.

@billsmith5166 2 ай бұрын

You might want to add a cross brace on your uprights. At that height your current stand might make the bearings less efficient and the readings could be well off.

@M0UAW_IO83 2 ай бұрын

The way the camera person *jumped* when it started! Those things are crazy loud though

@dirkjanvanvliet 2 ай бұрын

Cool! That thing is freaking loud indeed 😂 but what was the thrust reading? You built a nice test rig but I'm curious for the results!

@ginobragoli1448 2 ай бұрын

Looks like my old dad's motorbike exhaust 😂 👍

@andrewanderson5297 2 ай бұрын

That thing has now deafened Poseidon, what a noise!

@papakrakazyabrika 2 ай бұрын

👍👍👍

@cannongibbs9632 2 ай бұрын

I would absolutely love to see that thing in a plane

@gsestream 2 ай бұрын

nice, sounds like a 2-stroke engine at full rpm, like 20k or 200k rpm.

@neoplan6116 2 ай бұрын

Well, I think the 1:1 scale ones are louder but on a lower frequency so they hurt a little bit less - but you are feel them more in the stomach...

@matimoonhoney5606 Ай бұрын

How much trust did you get and how much fuel per time did it consume? Thanks for the video

@Whiteytightys Ай бұрын

first intrusive thought: mount this on a made-to-scale RC V1 buzzbomb

@tremorist 2 ай бұрын

Greetings from Germany.

@craigcoghlan546 2 ай бұрын

Great spot to run a pulse jet . What are we thinking, mate, a dragster or maybe a speed boat to go over to the island in this video, so where is this just a great backdrop.

@tootired76 Ай бұрын

Now you should make an R/C model of a V 1 buzz bomb to put it to use!!

@mariodidier001 2 ай бұрын

RC airplane incoming!

@talich9853 2 ай бұрын

Challenge for Johnny: making a mini turbofan with AFTERBURNER😊

@S.park.y 2 ай бұрын

Wicked. Which part of Aus did you blast out ear drums? Nice looking bay

@PiDsPagePrototypes 2 ай бұрын

Yes, yes they are loud. Are you ready to graduate to turbocharged burn barrels next?

@andrewfraser2760 2 ай бұрын

I think that one even scared the fish 😂

@wardog6667 2 ай бұрын

They called police 😅

@drraandini3410 2 ай бұрын

The sound is almost like a Formula 1 V10 engine. 👍👍👍

@brianhutchinson7863 2 ай бұрын

Could you try running it on HydroDiesel. I think that would work and have been wanting to see someone with a pulse jet try that fuel. It may run considerably cooler with about the same amount of thrust.

@wasseristnassss 2 ай бұрын

Build a V1 Rocket with this

@justDIY 2 ай бұрын

I need one of these for the back yard, fire it up whenever all my neighbors are making too much noise lawn mowing and weed whipping!

@GroovyVideo2 4 күн бұрын

I built several pulse jets 1980s - loudest thing ever - vibrate stuff of shelves in whole house - crazy heat - highest thrust 10 lbs - fire ball is size of 30 gallon trash can in dark - its impressive - way to loud -

@Alex-di8ti 2 ай бұрын

This is one way to make friends with the neighbours

@jeffd3660 2 ай бұрын

It looks super hot 🔥 .... did you put a heat gun on it to see the temperature of it ?

@Smickster01 2 ай бұрын

yes johnny q 90, that was a reed valve engine, a proper pulse jet is 3 times as loud.

@__BLXCKOUT__ 2 ай бұрын

Integza would be proud

@xtrmbeast 2 ай бұрын

it looks like it's hot

@Enderbro3300 2 ай бұрын

I wonder if it'd be worth it for pulsejet powered ground vehicles to water cool it

@stephenkelly8065 2 ай бұрын

They made an even greater noise when the warhead they were attached to during WWII exploded in London !

@madcatmarcel666 2 ай бұрын

Ja die V1 hat man so oder so nur einmal kommen hören. Hat man einen Einschlag überlebt war man danach allerdings Taub und die nächste definitiv nicht mehr kommen gehört.

@Cultist564 2 ай бұрын

even cursed it is German comment

@bluetoothtv 2 ай бұрын

👌🔥

@arnemdv 2 ай бұрын

Renembers me of the time where you‘ve tried to build jet engines.

@RascalCatify 2 ай бұрын

So how much thrust did it achieve??

@thingyee1118 2 ай бұрын

So what was the reading of the thrust?

@Lucas_sGarage 2 ай бұрын

How about some upgrades?

@M1LAD81 2 ай бұрын

I miss the times you used to show us jet engines.

@DavidSmashGames 2 ай бұрын

did it actually make 4lbs of thrust though?

@agrxdrowflow958 2 ай бұрын

How do you determine the pulse rate?

@stimpyfeelinit 2 ай бұрын

imagine putting flute holes in it and using some solenoids to cover the holes loudest instrument ever

@Mostafa-vs8bd 2 ай бұрын

Hello What about trust meter? You forgot

@technicbuilder6410 2 ай бұрын

Is there any way to throttle it?

@Uajd-hb1qs Ай бұрын

Is there a way to add a throttle to pulse jet engines or do they just do their thing the way they like it?

@ChristieNel 2 ай бұрын

Lovely kit. Any idea how long one valve lasts?

@alanhilder1883 2 ай бұрын

Well the "original" full sized ones almost lasted one flight.

@user-lg8fg6mh4j Ай бұрын

it's just hot or not without power