Jointers For Beginners - Use Tips, Tricks, Buying Advice and Safety

Рет қаралды 289,099

Күн бұрын

Support what we do at www.kmtools.com
Today we do a comprehensive walkthrough of using your Jointer, Safety, Tips, Tricks and Buying Advice. This is a great video if you’ve never used a jointer or just want to brush up on your skills.
Let me know what you’d like to see next! Please like, comment and subscribe.
----
Support what we do at www.kmtools.com
Crazy Strong N52 10mm X 5mm Magnets 10 Pack shop.kmtools.com/magnets
Sign Up for Our Newsletter for Product Announcements, Secrets Deals, and our Weekly Blog shop.kmtools.com/newsletter
This Week's Blog: How to Build and Use a Shooting Board (FREE PLANS): The Hand Plane Super-Jig kmtools.com/blogs/news/how-to...
Jointer Injury Video • I Had a Major Woodwork...
Serious Injury in the Shop - What Medical Professionals Need You to Know • Serious Injury - What ...
----
*Check out OUR BRAND NEW STORE for tons of great TOOLS and Support the Katz-Moses Woodworkers with Disabilities Fund*: www.KMTools.com
Buy the Katz-Moses Stop Block: kmtools.com/collections/stop-...
Buy the Katz-Moses Magnetic Dovetail Jig: kmtools.com/collections/dovet...
*Buy the Katz-Moses Woodworking Apron*: kmtools.com/collections/workwear
Donate to The Katz-Moses Woodworkers with Disabilities Fund kmtools.com/pages/kmww-charity
----
Timestamps
Intro 0:00
How a Jointer Works 0:39
Safety Rules 3:17
Rabbet Ledge 5:10
Setting Cutter Head/Outfeed Height 6:55
Jointing Boards Wider than your Jointer 7:50
Jointer Material Size Guidelines 9:13
Buying Advice 9:56
Get Tight Glue Ups/My Favorite Jointer Tip/Trick 13:40
Final Thoughts 14:27
----
I have Walnut Slabs for sale: kmtools.com/collections/walnu...
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/30bA39o 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
Musicbed SyncID:
MB01TVJPGJDTFWX

Пікірлер: 343

@katzmosestools 2 жыл бұрын

*Support what we do at* www.kmtools.com *Crazy Strong N52 10mm X 5mm Magnets 10 Pack* shop.kmtools.com/magnets *Sign Up for Our Newsletter for Product Announcements, Secrets Deals, and our Weekly Blog* shop.kmtools.com/newsletter *This Week's Blog: How to Build and Use a Shooting Board (FREE PLANS): The Hand Plane Super-Jig* kmtools.com/blogs/news/how-to-shooting-board *Jointer Injury Video* kzfaq.info/get/bejne/Ztpmhr2Lr6fMnac.html *Serious Injury in the Shop - What Medical Professionals Need You to Know* kzfaq.info/get/bejne/rNuBZLF_386xkac.html

@billqqq 2 жыл бұрын

Dad worked with wood his whole life. He was 80 when he took three fingers off with his jointer. His advice? Never lose focus. During any operation on any tool, never think about anything other than what you are currently doing. Second bit of advice? Never do any operation on any tool that doesn't "feel right". If it feels like you are doing something that isn't safe, it likely isn't, and you should find a different way to accomplish what it is you are trying to do. There are typically many ways to do something safely.

@squirrelydan3 Жыл бұрын

My dad was a finish carpenter and every time he cut himself was on the table saw because he lost focus. Yes, I said every time - 3 times to be exact. The third time he finally lost 2 fingertips for good.

@shadowlance267 6 ай бұрын

I'd also add the third thing would be that if something does go wrong, step away. Don't try to save a piece that's unstable, or try to release a jam with the machine running. Just let it go and if it flies across the workshop, that's ok (you're not standing in the path, right?). Turn the machine off, reset everything and start again. Broken blades or work pieces can be replaced.

@TheLucidscreamz 3 ай бұрын

oh my aint that the truth , i been woodworking 6 months , ive had a grindng ball on angle grinder grab shoe lace managed to turn off as trousers wer wraping in it grazed toe bad , then a nip by the kerf on table saw and a chizel into finger and last week top skin layers of finger in jointer , not to mention chop saw kick back that sent the blade guard across room at high speed very lucky not to be in its path , ive rethinked my work teqniue , but scared now of it , its no safe place to work in , its all limb trashing hazzard zone , i must remember that one

@SpartanORGN 2 ай бұрын

@TheLucidScreamz ⁠you should not be having that many close calls. If you are then you are working in a very unsafe manner. You are going to get seriously injured if you keep going like that.

@Bhg265 Ай бұрын

@@TheLucidscreamzfind a new hobby

@MrVitorio007 Жыл бұрын

the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzfaq.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.

@The_Ol_Bizzaroo 2 жыл бұрын

Love the tip for jointing wider than your cutter head! I've never seen this before, anywhere.

@trolltaker 2 жыл бұрын

I have seen it before, but it never hurts to be reminded.

@charlesthomas9294 2 жыл бұрын

That tip about jointing a board wider than the jointer was well worth the price of admission!

@EscobarStyle 2 жыл бұрын

Back to the basics 👌🏼. We ALL need to hear the safety tactics from time to time. Thanks 🙏🏼

@josephfleming6384 29 күн бұрын

Best explanation Ive seen yet!!!! Thank you so much!!!

@DaileyWoodworks Ай бұрын

Great primer. I’m adding this to my “training video” playlist for new guys to watch.

@billmankin6204 2 жыл бұрын

So happy to hear "The fact you are terrified makes you respect it." Have been working with tools that take away but do not give back for 30 years now, and that has always been my philosophy, still have all my working parts. Thanks for sharing your experience, and glad it wasn't worse.

@HuntsWorkshop 2 жыл бұрын

I also saw your video on how fast the jointer accident happened and wanted to say your willingness to be human and teach for the greater good is so much appreciated brother!

@funkypunkypine 2 жыл бұрын

A couple of safety things that I learned the very hard way: Don't joint end grain (duh, but I didn't know any better at the time), and be very mindful of knots in the wood that could vibrate loose and go flying towards your face. I'm very glad I was wearing safety glasses even though I didn't think I needed them with the jointer but I just decided to throw them on anyhow.

@souprmage 2 жыл бұрын

Another safety tip that's always worth repeating. Never use a power tool when tired. It's just not worth the risk. Love the channel, and your shop. Bought a SawStop recently and put in one of the CMT blades from your site. So very smooth. Loving it.

@chipsterb4946 11 ай бұрын

Tired or frustrated. I cut a dado in the end of a board that already had a rabbet the other day 😵‍💫 I’d been doing setup and test cuts for a couple hours and was thinking “finally I’ve got this right!” Still need to stop *before* I get there.

@Californians_go_home 6 ай бұрын

Drink a few beers and the frustration mellows out, then it’s safe to proceed. If you are tired, put on your glasses while you close your eyes to rest, then you can see to continue.

@beachbrettf 5 ай бұрын

I followed your advice and my last 4 employers were not happy.

@jasonsahadeo5740 Жыл бұрын

Every few months I look for these comments/ videos about safety and injuries just so my blood runs cold and I remember to respect the tools. Once I keep hearing these stories it's good enough for me. As a hobbyist I can afford to just not work if I'm feeling tired or not up to it. Also I use the more powerful dangerous machines early on in my woodworking session when I'm most alert and focused and do stuff like glue ups and finishing last. I insist for my guys and myself to take a nice break when we're doing repetative tasks too. If I feel like my mind is wondering, I'll just take 5 and grab a drink/ take a short walk. Going to the hospital is never worth it, take a break to refocus even if it delays the project by a day. Hope this helps someone, I feel like we all need to hear it over and over again cuz it's easy to get comfortable or feel rushed to fullfill an order and that seems to be when injuries happen.

@jasonscott6478 2 жыл бұрын

Electrician here, with nearly 30 years in the trade. Swapping between voltages on a dual voltage motor should not change the RPM. I appreciate your video about jointers. I'm glad your injury wasn't worse. Thanks for sharing your knowledge with all of us weekend warrior woodworkers.

@davidsavage692 Жыл бұрын

And the amps will be lower

@TKC_ 8 ай бұрын

It may get your motor up to speed faster on start to go higher voltage since inrush amps and voltage sag will be lower. But I can’t say I’ve really noticed anything appreciable. Maybe your utility will appreciate it the most since your draw will be balanced on a split phase system. Honestly I’ve done this to free up 120v plugs more than anything since my shop is wired for both

@haroldschultz5864 10 ай бұрын

I'm a little late to the party but this is a great video for a newbie like me . Thanks for the safety tips 👍

@BroRiv 2 жыл бұрын

Excellent advice. I bought an 8" Wahuda helical jointer for $549 delivered (2 years ago) and it's handled everything I've run through it, mostly hardwoods. Takes up little space, attached to a homemade rolling cart and I'm STILL on the first set of blades- only have needed to rotate a couple. Excellent choice if you have a smaller shop or on a budget. Brother Riv

@richpeggyfranks490 2 жыл бұрын

After nearly 50 years of woodworking, I accidentally grazed my thumb on the tablesaw. I instantly re-gained new respect and caution for all my tools. It's a hard lesson to learn, but was probably overdue. Thanks for a great video. PS, I'm getting a lot of use from my dovetail guide and, after getting the feel for the angles, have been free-handing some cuts recently.

@johnnycorn7225 9 ай бұрын

Seems like it's always the table saw I still refused to use one

@Mark_Wood 2 жыл бұрын

Awesome review of safe practices. Great to have you cranking out videos more regularly again!

@JD-ff4of 2 жыл бұрын

Jamie Perkins of Perkins Brothers channel had a horrific jointer accident. After watching his videos on the whole thing, I most certainly have a new level of respect for this machine!!

@lain2779 2 жыл бұрын

Yeah, his video about it should really show people how dangerous this tool can be.

@92Jdmsupra 6 ай бұрын

Moonpie Creations had an accident with one 2 months after this video came out.

@tillertradeco 2 жыл бұрын

always great info shared in your videos. thanks for what you do!

@ronbishop4057 Жыл бұрын

Excellent advice, straight up! Thanks.

@WVgunfun Жыл бұрын

Thanks for the 101, just got my first jointer, an old 6" Rockwell that came from an old timer that took very good care of his tools.

@harrydavis6903 2 жыл бұрын

Well done and informative. Thank you.

@swiwswiw 2 жыл бұрын

I’m not a master craftsman and have been watching all your content but this one really spoke to me. “Back to basics” one comment read - yes, more of these please. Not to dumb down your content but more info like this along with your usual expert advice on the finer aspects of woodworking would be welcome. Plus love the humility of mentioning your injury and ensuing respect for the tools we use is VERY important. It’s as if I am getting advice from a trusted friend and not a career KZfaqr. Well done sir!!

@snydercustomwoodwork 2 жыл бұрын

Been wanting to see you make this video for awhile, thank you!

@fredzaspel7350 8 ай бұрын

Very helpful. Thanks much!

@giutubospatubo1546 7 ай бұрын

Great video! Thanks!

@xoxo2008oxox 2 жыл бұрын

Be mindful of auctions and estate sales. While some might have some great selections, there are many bidders that will up the price to the point you can get new, or refurbed. And if you buy online, pay the liftgate service fee...well worth it with these cast iron jointers, planers, saws...

@watchguy79 2 жыл бұрын

Thank you for this !!! I love it. We have the same planer and jointer

@J.A.Smith2397 2 жыл бұрын

New episode! Was watching old ones yesterday!

@independent900 2 жыл бұрын

A couple of very useful tips, thanks!

@aneerenb 2 жыл бұрын

Many thanks for the Sunday morning lesson :)

@jgo5707 2 жыл бұрын

Very insightful and educational. Love this channel

@justinwellen3772 2 жыл бұрын

Great run down, thanks!

@bryankia 2 жыл бұрын

This was very helpful. Thank you.

@fabianulloa2961 2 жыл бұрын

Great guy, teaching us all what we need to know.

@Githy1378 2 жыл бұрын

I enjoy that you still use A older jet Jointer and a Dewalt 735planer.

@kevinr1704 2 жыл бұрын

Thanks for this informative video!

@mbrain03 2 жыл бұрын

I’m a newer wood worker and this was an awesome video to watch. I am happy I subscribed to your channel a view months ago

@MCsCreations 2 жыл бұрын

Really excellent tips, Jonathan! Thanks!!! 😃 Stay safe there with your family! 🖖😊

@larryohara6513 Жыл бұрын

Very good info provided!

@richd8537 2 жыл бұрын

Great video. A jointer is on the horizon for my next powertool.

@pemtax557 2 жыл бұрын

Excellent video Jonathan, as always, I learned something new ... cheers mate!

@TheTranq 2 жыл бұрын

Nice. So many people I watch don’t realize the downward pressure needs to be on the outfeed side, glad you made that clear

@Anxious_McStabby 7 ай бұрын

Just ordered my first one, so thank you for this

@bradleytuckwell4854 2 жыл бұрын

A lot of great advice there thanks for sharing

@phishy96 2 жыл бұрын

awesome tips, and i love your late night show too!

@ugsoldun7871 Жыл бұрын

great vid, lots of useful info, cheers

@AvroBus 2 жыл бұрын

Very useful vid thank you!

@boyscout419 Жыл бұрын

YOU are prescient! Two days ago, I installed the first jointer I've owned since I got rid of one about 30+ years ago! Your timing for this video was perfect! I find your videos to always be first rate, but this one takes the cake! Thanks so much, Jonathan! (from "Canter Lane Woodworking", Springfield, Oregon)

@videousername3 2 жыл бұрын

Perfect timing and I learned a lot about jointers. I just started planning on how to take care of my grandfather's jointer I recently inherited. It's a 6" Woodtek that's pretty similar to a Rockwell 37-220. It needs to be taken apart and painted since it's starting to have some rust spots, but overall it's in good shape.

@KuntaKinteToby 2 жыл бұрын

I'm glad your injury wasn't too serious, stay safe in the shop!

@211ajb Жыл бұрын

Thanks for the lesson on safety

@toonybrain Жыл бұрын

This is an immensely helpful video. I use my vintage Craftsman jointer regularly but I have questions about my procedure. You’ve covered all the bases. Thank you.

@HWCism Жыл бұрын

As always, nice explanation, thanks

@dtork47 2 жыл бұрын

Always very informative, thanks and stay safe. Cheers from MT

@pumpkinheadghoul 2 жыл бұрын

OUTSTANDING video, my friend. One of the best I've seen.

@alsaffarstudios 2 жыл бұрын

Very useful video, great tips and informations, thanks for sharing it with us 🙏🏼

@johndolleslager1270 2 жыл бұрын

GREAT VIDEO. I am in the process of figuring out how to use the jointer and planer to flatten some twisted boards!!! Thank you for all of your information

@cady.moriarty 2 жыл бұрын

I don't have a jointer yet, but I do have 15 minutes 😅 Someday I'll get to put this knowledge to use, but until then I'll keep binging your router videos. Thanks again, and take care, JKM!

@PikkaBird 2 жыл бұрын

About checking the fence for square when buying a used machine: Check it across the entire length, as the fence may be bent/warped. Especially aluminium ones, but I've seen bent iron fences too.

@court2379 9 ай бұрын

Just take it off and run it thru the jointer 😉

@johnford7847 11 ай бұрын

This type of video is an invaluable service to us all. Thank you so much!

@quadsquadracingable 2 жыл бұрын

I bought a bench top one and used it once and sold it. Holding out for an 8" that can be upgraded with a helical head or already has one. Great video

@TheDevnul 2 жыл бұрын

I bought a bench top jointer a few years ago. I’ve been looking for a jointer ever since. You get what you pay for. I’ve learned my lesson. I’ll never buy from that company again.

@larrywiltse6268 2 жыл бұрын

I liked your safety tip on where to locate the fence. I inherited a Shopsmith Mark 5 from my father. He got it “used” in 1955 along with a jointer. A few years ago I ask a sales rep at Shopsmith why they did not make a 6” jointer and was told quite politely that I would not be able to lift it on and off the Shopsmith. The operating instruction for this jointer indicate that the blades can be ever so slightly higher than the out feed table. Thank you for all of the useful information you provide.

@ThomasofAkron 2 жыл бұрын

Thank you so much for covering bases on safety and buying a Jointer Last Thursday I bought a Rockwell/Delta 6” Deluxe Jointer. Year 1978. Had no fence or factory guard or motor. I had a 3450 motor. Got cutter head RPM to 5018 with my pulley setup. Working on locating a fence. Had a wooden guard that works ok. It is co-plane flat. Tad of rust on both beds. Still cleaning gently. Only cost $50

@skemker 2 жыл бұрын

Great video. I have HAD MY JOINTER ALMOST 2 YEARS. LEARNED A LOT. THANKS FOR THE GREAT VIDEOS

@cpickslay 2 жыл бұрын

So many great tips! I didn’t know my jointer could rabbet or joint wider boards.

@kevinzoeh6494 2 жыл бұрын

Very helpful tips & perfectly timed as I just picked up a used jointer without ever having operated one.

@SteveC38 2 жыл бұрын

Great Video, JK-M 👍

@allensmith6430 Жыл бұрын

thanks exactly what I needed

@danielbarbieri8199 Жыл бұрын

Thanks That was THE vid I needed to watch 👍

@dukeengine1339 2 жыл бұрын

You are always great my overseas friend! 🌞🙏🏻

@slomkaadas9603 2 жыл бұрын

Great video, thx for upload m8 Cheers from Poland 🇵🇱 🍻

@secretwoodproject 11 ай бұрын

Thanks so much for this video. I am very glad that you did not lose your fingers Jonathan. Appreciate the safety info in this video. I am new to jointer tools so this really helps.

@bhoola123 2 жыл бұрын

NICE tips. Thanks for sharing. One time my brother in law ended up putting his whole hand on the cutter, as the wood from under slipped (backward or forward). It looked bad for long time.

@MrLeram12 2 ай бұрын

Thanks. I just bought a 6" one since I haven't done much large stuff. Hopefully it wasn't a mistake. And...I subscribed to your channel. Thanks again.

@tellthemborissentyou 2 жыл бұрын

We have those bridge type guards in New Zealand as well. I found it a bit weird lifting my hand over but once you have a done it a few times it is just what you do. They must be an option because the same machines are available in Australia with the flappy sprung gate thing.

@pashaveres4629 Жыл бұрын

Safety First! Got my first table saw many years ago. Was learning to use it the day the radio announced Elvis's death. Am grateful that I never had to pay dearly for my many recklessnesses. Am VERY serious now (my ex- used to teasingly call me "The Safety Officer"). Looking forward to taking my new jointer out of the box. Appreciate your good efforts, Jonathan. First vid, have subbed. Aloha

@l.w.9212 9 ай бұрын

Thank you for this. I recently discovered the need for and also that I enjoy working with power tools quite a bit...but no one ever taught me anything at all whatsoever. so I bought a reciprocal saw, a circular saw, a multi-tool, a drill, a driver and a brushless drill driver so far, I'm pretty sure there's more and this has been in two months time. I was looking to buy one of these. Considering that I sawed the cord in half from my circular saw the second time using it and my brushless drill grabbed my hair and knocked me around a bit, you may have just saved my life...lol. but really though. thank you.

@banshee200 2 жыл бұрын

Dude... #mindblown - I have been running my old grizzly (Craigslist purchase) for the past two years with the outfeed table just a *hair* lower than the cutting edge of the blade... quick fix, but thanks so much for sharing this, and for the super important safety reminders!

@brentnicol6391 2 жыл бұрын

Thank you very much for the video and information. as mechanical engineer and I work on plenty of machinery, I will say that all machinery must be handled with care and never let your guard down. Always be aware and if in doubt, do not do it. Thank you very much for your time and videos.

@PeoplesCarpenter 3 ай бұрын

Great video! I love my jointer. I'm in New Zealand so it's 240 volts, and it's 15 amps. 12 inches wide, spiral cutterhead, and it's a combination jointer and planer. It's actually really quick to convert between modes. And in a smaller shop (6 x 10 metres), it's the way to go.

@harleyfiremedic7796 2 жыл бұрын

Thanks!!!!

@davehorn1422 2 жыл бұрын

Outstanding video. I see where I've been messing up.

@edt5276 6 ай бұрын

Great video. Very helpful. Thanks! P.S. "Coplaner and parallel" is redundant. All planes that are coplaner are also parallel. When parallel planes are coplanar they intersect at every point. When parallel planes are not coplanar they don't intersect at any point. Perfect infeed and outfeed tables are always parallel planes but only coplaner when they're at same height. A cube has 3 sets of parallel planes but no sets of coplaner planes.

@a.j.simmonds6324 5 ай бұрын

I really wanted a 8" Jointer but it was slightly out of budget and space is tight in my shop. Instead of wishing I had an 8" Jointer I got a cheap small 6" Jointer for under half the price and can do 90% of what I would do with an 8". Im a huge proponent of buy once cry once but sometimes you need to try once first, the tools we want are not always the tools we need. I would love to have an 8 or 10" Jointer but I am in no rush to upgrade now that I have a jointer.

@walterrider9600 2 жыл бұрын

thank you

@adrianharrison5208 3 күн бұрын

when I go to do some work in my workshop I always take a minute to sit down and relax before I start anything, It gives a minute to realize how dangerous that place is and how quickly my day can go bad.

@RodJSmith 5 ай бұрын

Thanks for the great video. I've just bought my first jointer and this video had a lot of helpful info for first-time users. The unit I bought is a combo jointer/thicknesser. Any tips on jointing boards wider than the jointer when your thicknesser is the same width as your jointer?

@markarita3 2 жыл бұрын

Thanks for the "board too wide" tip!

@fancraft1266 5 ай бұрын

The european bridge type guards are just so much more securing than the american version ones. I am in first year woodworking apprenticeship in Switzerland and the first machine I used is the jointer, because in Europe the jointers are not considered as dangerous tools with these better guards we use.

@mikecurtin9831 2 жыл бұрын

Some very useful tips. Subscribed, liked, and now commented. :-)

@nobody3692 2 жыл бұрын

try the king 12" jointer planer combo! 1yr of heavy use and have only rotated 2 inserts, but cleaning is key especially pine gum

@1barron 2 жыл бұрын

Good video. Lots of info, I wish I had seen this a few weeks ago as I had some boards wider than six inches to joint. I had to saw them down to six inches, what a waist.

@gilbertomanzanilla4333 2 жыл бұрын

Glad im subsrcibed💯👌

@kentgray2220 Жыл бұрын

Safety is very dear to my heart, especially after working almost 40 years in the oilfield. I always give serious consideration to "what might happen" during an operation and ensure safeguards are in place. I think about every cut at the miter saw (boards not flat), every hole at the drill press (is there a fence to hold it in position), every run through the jointer and planer, and especially every cut through the table saw. Yep, I still have 10 digits, but it comes with preparation and planning.

@montyswoodworkscrafts2232 2 жыл бұрын

Great video, the one bit of workshop kit that fills me with fear and I haven’t mastered to use properly yet.

@VitalityMassage Жыл бұрын

If you simply WATCH what you're doing, you can use your hand (much better control) to hold the piece flat against the fence. I did benefit from some of these tips though. Thanks.

@Spacepod96 2 жыл бұрын

Thanks again Jonathan for another great video. Only having a small 8x12 workshop as im only starting out i haven't got the room for a jointer.... one day hopefully.

@MortimerSugarloaf 2 жыл бұрын

Small shop guy here. Try a jointer plane. It takes a little practice sharpening and keeping your strokes square on edges, but once you get it down you'll be happy to have saved yourself several square feet of floor space and hundreds of dollars. My electric jointer is nothing but a shop real estate hog now.

@Spacepod96 2 жыл бұрын

@@MortimerSugarloaf i have recently found a 1932 stanley no.7 jointer plane. In the process of restoring it then practice, practice practice 💪

@MortimerSugarloaf 2 жыл бұрын

@@Spacepod96 awesome, dude! :D I hope you have so much fun with it. Enjoy!