DIY LED Strip tutorial

Рет қаралды 7,484

Күн бұрын

5mm LED strip - amzn.to/453pn9W
Spec7 racing drone - flyfive33.com/...
Kesters solder - amzn.to/3o3UxNF
flux pen - amzn.to/3BshBsG
#ledstrip #droneled #droneracing
join the FPV Sales Alerts FB Group: / 425554224924945
Support the Channel using these links
RacedayQuads - bit.ly/3PDd7FQ
GetFPV - bit.ly/3FFAAkX
Amazon - amzn.to/2FhFwkT
Five33 - bit.ly/3HKPB7O
NewBeeDrone - bit.ly/3HOZtNV
FPV Cycle - bit.ly/3hyHtfZ
Catalyst Machineworks - bit.ly/3WplI15
International
Airblade - bit.ly/2E6qtbU
Banggood - www.banggood.c...
Join my Patreon - / jone5fpv
My Perfect Racing and Freestyle build parts list
docs.google.co...
Most or all links above are affiliate links, and I will receive compensation if you use them.
music by -
Aorta Project - / @aortaprojectvevo8240
Lakey Inspired - / @lakeyinspired

Пікірлер: 52

@shadowofchaos8932 Жыл бұрын

FlyHighFPV has a great set of LED strip for quads.

@skyreadyrc5873 Жыл бұрын

They are so bright, you can see the blue tint on the concrete below! That's pretty cool!

@unknown-subject8499 Жыл бұрын

10:55 - 11:05 , You've got the "ghosts of bi-blades" following you around again!!!!! 🤣🤣🤣🤣🤣😍😍😍😍😍

@Necronekoko Жыл бұрын

I followed this tutorial and am very pleased with the outcome. Im using the 24v strip on 6s and it looks really bright. Thank You so much !

@JonE5FPV Жыл бұрын

hey thats great, thanks for letting know it worked. love that setup for sure.

@verdi6092 Жыл бұрын

I think you are the only one doing an led strip tutorial 👍🏼

@JonE5FPV Жыл бұрын

i promised it a while back, and didnt think anyone wanted to see it, but glad i put it out, much better response than i thought

@ShitPilotFPV Жыл бұрын

Flyhighfpv has the best strips!

@CalleyyyC Жыл бұрын

Wow lighting up the whole area everywhere you fly, super bright! Nice

@aphinion Жыл бұрын

Are you powering those 12V LEDs directly from the motor wires on a 6S? That part confuses me a bit... I was buying BEC-boards to give them a solid 12V supply from Vbat directly....

@JonE5FPV Жыл бұрын

I am running to 5S motor wires here, but also used 3S, and 6S. On 3S its not nearly as bright.

@leadfingers Жыл бұрын

These little cobs can handle way more voltage then they are rated for. And soldering to the motor channels keeps the build simple.

@metrallofpv1722 Жыл бұрын

#metoo APHI FPV! confusing as fak! lol!

@metrallofpv1722 Жыл бұрын

@@leadfingers , but what about the numbers...!?

@leadfingers Жыл бұрын

@@metrallofpv1722 We can argue about made up spec sheets from Chinese manufacturers or we can go fly. Put the LED's on the drone. 🤣

@brandonw987 Жыл бұрын

According to the manufacturer and website these LEDs are rated from 12 to 24 volts. It also says 12 to 24 volts on one of the pictures on Amazon but on the description it only says 12. But that's good that means that there is some headroom for most packs.

@MCsCreations Жыл бұрын

Awesome! Thanks for the tutorial, Jon! 😃 Stay safe there with your family! 🖖😊

@deezyfpv Жыл бұрын

Just in time for my new build.

@bosslifefpv Жыл бұрын

FlyHigh leds are the best hands down

@SteveO4478 Жыл бұрын

Pretty dope man!!! Gonna have to run some of these leds on my 5inch!!!💯

@Loki_FPV666 9 ай бұрын

So are the two wires attached to different motor pads or is one going to a motor pad while the other goes to ground?

@jiatan_fpv Жыл бұрын

I guess the better way would be to use an adjustable BEC (so that you could overvolt the 12V strips) with 'off' pad and wire that 'off" pad to a spare FC GPIO, then you'll be able to blink them and turn them on and off from the radio.

@JonE5FPV Жыл бұрын

Interesting idea. These light up when motors are spinning currently, but would be a cool way to add some functionality to a non-addressable LED.

@baggszilla Жыл бұрын

Nice how there were no Spec7s harmed during this video! We don't want the Audubon coming after us! So get the 12v COB lights and wire them to any 2 motor pads on the ESC of the same motor on 6S? Thanks Jon E5!

@baggszilla Жыл бұрын

Got it I read below and found d you answered it already. Thanks!

@jeanfrancoisvandiest9729 Жыл бұрын

Nice sharing❤👊👍

@artifixprime Жыл бұрын

Those snips look like the ones that come with an Ender? Use mine for everything. Nice tutorial :)

@DavidBarbarine Жыл бұрын

I Love it!

@isaacmitchell7780 Жыл бұрын

woot woot!

@kevinjulievan Жыл бұрын

Nice !!

@kelbrock Жыл бұрын

Hahaha 17 beer fridge’s 😂

@Phuong.Nguyen- Жыл бұрын

Good drone ❤😊

@Sohail187 Жыл бұрын

These sort of LED lights, how much battery power do they recover?. Are they going to reduce the amount of flight time you get drastically?

@jumpstartfpv Жыл бұрын

You showed the COB strip was rated to DC 12 V but powered it with a 6s LiPo. No problems? Also Can these be powered either from the motor pads or direct VBat?

@JonE5FPV Жыл бұрын

I ran these off of 5S, they for sure work well on that. Possibly because we typically only power them up for 2-8 minutes at a time. Also they light up as motors are spinning, so they probably dont put out full voltage unless you are at full throttle which we may only be doing for a second. I got the recommendation on which strips to use from the street league/spec guys.

@KwongKan Жыл бұрын

I'm confused.......... you're connecting 12V LED strip to one (of 3) ESC phase running 6S???

@JonE5FPV Жыл бұрын

yes, you solder each of the 2 wires to 2 (of 3) motor wires. This is running 5S.

@KwongKan Жыл бұрын

@@JonE5FPV okay....... that sounds interesting......... BTW I've been running those 12V COB on 4S VBAT, ans 24V COB on 6S VBAT

@FlyZoneFpv Жыл бұрын

Nice JonE 5

@fpvwithme 11 ай бұрын

I was told to wire directly to the positive and negative pads. Is that a bad idea?

@JonE5FPV 11 ай бұрын

It would work also if only doing 1 strip

@fpvwithme 11 ай бұрын

@JonE5FPV awesome. I've had the strip for a month now and havnt installed it. Thanks bro. Hey, subscribed!!

@oli_boy_668 9 ай бұрын

what if you dont have the wire ??

@JonE5FPV 9 ай бұрын

Get some wire?

@notyet_fpv Жыл бұрын

Hey how good is this drone, what battery and what motors Nd howmuxh flight time you get at approx what speed?

@jlarson42 Жыл бұрын

👍💖😎

@lackofeffortfpv7412 Жыл бұрын

what bec in this build to step down to the 12v? just the one off the fc?

@JonE5FPV Жыл бұрын

not using a bec, vbat from 2 of the 3 motor pads directly to + and - of the LED strip.

@lackofeffortfpv7412 Жыл бұрын

@@JonE5FPV oh, it uses two phases from esc channel output? weird and interesting. That wont pop an led?

@lackofeffortfpv7412 Жыл бұрын

welp now i gotta learn some maths, assumption 1)120 degrees out of phase wouldnt be full vbat else the leds would pop, tbc

@KwongKan Жыл бұрын

@@lackofeffortfpv7412 Been using 4S VBAT on these 12V COB without issues....... .... ..... Guess what 3 phase voltage of 14.8V is? .... About 25.2V!

@lackofeffortfpv7412 Жыл бұрын

@@KwongKan im thinking maybe its like peak/vu meter