John Deere A Restoration - Start to Finish

No video

John Deere A Restoration - Start to Finish

Рет қаралды 2,887

jonelsonster

Жыл бұрын

Complete restoration of my high clearance 1948 John Deere AN. Began restoration 2014 and completed 2017.

Пікірлер: 35

@JasonSmith-vd1sz Жыл бұрын

You guys did an amazing job on restoration process. Thoroughly enjoyed it. Congratulations!

@jonelsonster Жыл бұрын

Thank you! I'm glad you enjoyed it.

@derweibhai Ай бұрын

You guys do amazing work. Love your videos, they inspire me to get my green junk in shape. Gotta get new governor gears in my H this fall!

@jonelsonster Ай бұрын

Thanks! We had to replace the governor gear in our H too.

@ronrobertson2242 9 ай бұрын

Awsome rebuild. Love it thanks for sharing!

@jonelsonster 9 ай бұрын

Thanks for watching!

@newtsfarm Жыл бұрын

Makes me want to get my '46 slant dash going again. Thanks for sharing.

@jonelsonster Жыл бұрын

Thanks!

@larrydavidson3402 Жыл бұрын

Awesome video, so nice to see father and son working together on the A. Great memories to cherish.

@jonelsonster Жыл бұрын

Couldn't agree more!

@keepcalmandfarmon5401 Жыл бұрын

Nice work!

@jonelsonster Жыл бұрын

Thanks!

@6.0chevy76 Жыл бұрын

Great job! Beautiful tractor 👍

@jonelsonster Жыл бұрын

Thanks 👍

@charliemacrae1045 Жыл бұрын

Awesome job. Inspiring job.

@jonelsonster Жыл бұрын

Glad you enjoyed it!

@VernePomraning Жыл бұрын

Seems that tractor had a very hard life before you got it. Great music too.

@jonelsonster Жыл бұрын

Thanks. Yes, it was well used. But it was a really fun project. Since I bought it for just over scrap metal price, the initial investment wasn't too bad. I got lucky to find used tires for cheap ($600 for the pair, delivered) because otherwise those tires are about $1500 a piece!

@wademizelle3433 Ай бұрын

Great job, what tractors do you use on your farm? Enjoy all your videos. You could line all your tractors up and give us a description and history. Would be really great. Thanks

@jonelsonster 25 күн бұрын

The main workhorses are: JD 4240, JD 3020, AC D-14, and our old JD 70.

@corsairsmitty9691 Жыл бұрын

That was cool. I have a question, why did you go with the oversized pistons, instead of using standard pistons and having the block sleeved? I am just curious, as I have a 41 A and might rebuilt the engine at some point.

@jonelsonster Жыл бұрын

I went with oversized because they were available. In my mind, if they are available, it's easier to just bore out and buy oversized pistons. The only time we have sleeved and then returned to standard was on our H and our LA, because we couldn't get oversized pistons.

@corsairsmitty9691 Жыл бұрын

@@jonelsonster that was my thought. The standard parts for these old girls are getting harder and harder to find. It makes sense to go with what is available. Thank you for your reply. I have another question. How difficult is it to change the clutch fork and bearing on an A?

@johndeere-yk6db Жыл бұрын

Nice video. Good to see them restored. I have a 1948 a that is stuck. Any suggestions as to how to free it up would be much appreciated.

@jonelsonster Жыл бұрын

Depending on how "stuck" it is, you may be able to pour penetrating oil into the cylinders and work the pistons free at the flywheel. If that fails, you'll probably need to pull the head off, disconnect the rods from the crankshaft and pound the pistons out with a hammer. Don't hit the pistons directly. Use a wood block or a section of 2x4 if the pistons are towards the bottom of their stroke. We've done this a couple of times. Then bore the cylinders and buy oversized pistons. Good luck 🤞🏻

@johndeere-yk6db Жыл бұрын

I've tried a gallon of PB Blaster in the cylinders with no luck but I haven't tried pounding the pistons back. Will try that this coming spring. Wasn't sure if pounding on the pistons would cause other damage. Thank you

@tractorguy100 Жыл бұрын

I just acquired an single front end for my 48 A and I noticed that only on one side just above spindle there is a 3/8 bolt that holds shield on the yoke. Why they didn’t do the other side I don’t know.

@jonelsonster 11 ай бұрын

I have a couple of single tire front ends and each one retains the axle differently.

@TractorDad Жыл бұрын

Maybe I’ve missed it in your videos but what paint do you use? Thanks

@jonelsonster Жыл бұрын

I always use Van Sickle paint from my local ranch store. I think it's very good quality, I like the color, and it's affordable. And I buy the catalyst hardener and mix that in too. You have a few hours of pot life, but it sprays on easy and hardens with a nice glossy appearance. The hardener makes it resistant to gas or other solvents, so it stays looking nice. And if you ever have to touch it up, they sell spray cans of the same color and it is a very good match.

@TractorDad Жыл бұрын

Awesome. Thanks for the info

@coreylimberg4934 Жыл бұрын

Your friend still have the parts tractor? I’m looking for a set of 42” rear cast hubs and wheels for my 1948 BW

@jonelsonster Жыл бұрын

I bought the complete parts tractor, so yes, I still have the spare 42" rims. But I don't think I want to sell them at this point. I'm sorry.

@clarencetrice4442 Ай бұрын

the engine and the cylinder head can be welded up as long its not.leaking in the engine cylinders most likely water 💦 😮 was left 👈 😮 in the tractor 🚜 😮 and it froze U should use water no way antifreeze year round it cools alot better after the tractor 🚜 😊 is back 2 gether and running U 😊 have 2 get all of the air out of the cooling system it may take a while 2 do so it the tractor 🚜 😊 run the engine has 2 warm up 2 do and it may take a few times the tractor runs good it still sounds like its on the old 6 volt system it needs 2 be changed over 2/ 12 volt alit more cranking amps 2 turn the engine over alot faster all of the old 6 volt batterys are just about gone they are a thing of the past now cars and trucks changed over 2/12 volt in the mid 195OS 😊😊 OMG 6 2O 2O24

@jonelsonster Ай бұрын

Luckily I was able to buy an entire parts tractor with an un-cranked block and head for only $120... So I went that route rather than trying to repair the cracks.