How to Build Kitchen Cabinets & Install Drawer Slides

No video

How to Build Kitchen Cabinets & Install Drawer Slides

Рет қаралды 1,040,661

Күн бұрын

Learn how to build kitchen cabinets and install the drawers using drawer slides.
MATERIALS LIST: www.makerspart...
Build & install the upper upper kitchen pantry cabinets • Build & Install Kitche...
Finish, Fit, and Install the Cabinets • How to Install Kitchen...
Make, Fit and Finish the Countertop • How to Make a Beautifu...
Free Design Plans on my website: jonpeters.com/b...
Thanks to my sponsors:
Visit Garnica Plywood at www.garnica.one...
Visit Rockler at www.rockler.com/
How to make Drawers • How to Build Plywood D...
Rockler Drawer slide jig www.rockler.com...
Self Centering Bit Set www.rockler.com...
Follow me on Instagram: / jonpeters_
Subscribe to the Jon Peters Shop Talk: / jonpetersar. .
Facebook: / art-ho. .
Website: jonpeters.com/
The tools and products I use most frequently:
Woodworking Products:
Bosch 10-Inch Dual Bevel Axial-Glide Compact Miter Saw: amzn.to/2M7Pm7G
24" Sure-Foot Aluminum Bar Clamp: amzn.to/2JArKtL
48" Sure-Foot Aluminum Bar Clamp: amzn.to/2M3t4nr
Powermatic 10-inch 3 Horsepower Tablesaw: amzn.to/2JzZesk
Hitachi 10 inch Sliding Compound Dual Lever Miter: amzn.to/2LxLpZ1
Milwaukee M18 Fuel 2 Combo Kit: amzn.to/2JhwYeO
Milwaukee M18 FUEL 18-Volt 7 1/4 in. Circular Saw: amzn.to/2JzZNlW
DEWALT DW2567#6 Countersink 9/64-Inch Drill Bit: amzn.to/2sJqk5K
Jet Drum Sander: amzn.to/2Lt7FD6
BOSTITCH 1-Tool and Compressor Combo Kit: amzn.to/2Jhc9jr
Flexzilla Air Hose, 3/8 in. x 50 ft: amzn.to/2sN7L0F
3m(TM) Half Facepiece Respirator (Dust mask): amzn.to/2sF6Ekg
Titebond II Premium Wood Glue: amzn.to/2JIgF70
3M Paint Project Respirator: amzn.to/2M7gQdK
Milwaukee 18-volt Compound Miter Saw: amzn.to/2JoGybT
Home/ Garden Products:
Zero-G 50ft Hose: amzn.to/2sDaASS
Greenworks Hedge trimmer: amzn.to/2M4ZFcN
Greenworks 40-volt chain saw: amzn.to/2M0AjwB
Greenworks 80-volt blower: amzn.to/2M79Q0r
Video Production Products:
Apple MacBook Pro 13.3-Inch Laptop: amzn.to/2M8X7Kv
Cannon M50: amzn.to/2JeSr82
Cannon EOS 80D Digital SLR: amzn.to/2Jzk3Eu
Rode Compact Shotgun Microphone: amzn.to/2JAyFTL
Apparel Sponosor: Mountain Khakis
www.mountainkha...
/ mountain. .
/ mountainkhakis
/ mountainkhakis
/ mountainkha. .
Live Life Untucked, #WorkHardPlayHarder

Пікірлер: 217

@Hateweek1984 4 жыл бұрын

I love this method for drawers, so much better than the tedium of a locking rabbet, going to have to try this next time! Always great to see "other" methods of construction.

@lilmoneyboy335 Жыл бұрын

Awesome book that gives you step-by-step photos kzfaq.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!

@simonlunt353 3 жыл бұрын

As a joiner I have made lots of cabinets but here in the uk 🇬🇧 we use a lot of chip board which I think is rubbish I like the way you chaps use plywood which if want you can laminate it both sides and your pocket joints great too we rebate are chip board which when glued and screwed good and strong 💪 nice jig for the draw runners nice job 👍👏👏

@patrickarchuleta9594 2 жыл бұрын

Ive watched your work its outstanding may God continue to bless you 🙏🙏👍👍

@robertw.1499 5 жыл бұрын

The accuracy, easy way you do stuff is enviable. I know you've been doing this for over 20 years, but still, you are an inspiration 🤘

@laststand1526 4 жыл бұрын

Kung titingnan prang madaling tingnan pero sa actual ay mhirap din yan lalo na sa mga measurements. Dpat dka magkamali. Perfect

@trothebro 6 жыл бұрын

I'm excited for the day when you get good enough to just glance at a stack of lumber and create something without even touching it. I'm sure you will get better Jon, keep up the good work.

@daveengstrom9250 2 жыл бұрын

I like that biscuit trick for aligning things.

@rwe2156 6 жыл бұрын

I use spacers works really well no marking. Same thing for drawer slides if you don't have a jig.

@_rachde 2 жыл бұрын

This was amazing. You're so precise it is incredible.

@markfrank0924 4 жыл бұрын

Love the video and all your work. You're the gold standard of woodworking professionals. I was wondering when making bottom drawers with the slides in the middle of the inside of the cabinet and middle of the drawer is there danger that the drawer slide will scrap the bottom of the cabinet? If you can answer this question or if someone else would like to answer that would be great.

@debslifesimplified6406 3 жыл бұрын

Im new to your channel, and want drawers just like this in my kitchen. I live in an old mobile home that needs serious updating. Thanks for showing us how to do this.

@mooman86 6 жыл бұрын

You make it look easy ! Having the right equipment helps so much

@anthonyanthaudainea3499 5 жыл бұрын

Cool and simple great job

@mj-ls7qr8xp3n 2 жыл бұрын

Wow. Proper tools, etc...... Great video!

@RGorman49 6 жыл бұрын

fantastic instructions. I have tried to build a few and lotsa of struggles, this helps a bunch. Many Thanks!!

@JohnvanGurp 5 жыл бұрын

OK I think I'm ready to give it a try but amd going to start with cabinets for my workshop, before making some for the cottage. Make the mistakes where they won't be seen before doing the work that should be nice.

@TeamProsperity 6 жыл бұрын

That’s a different approach to building a cabinet. I like it

@FranksDIY 6 жыл бұрын

Jon you always explain things great . Keep up the good work

@maricarmaulion1440 4 жыл бұрын

Awesome work, sir! More power to you! Can't wait to see your other videos.

@adoniasmori29 6 жыл бұрын

Thanks for your great axplanation and share your knowledge, regards from Lima-Peru

@tompritch56 6 жыл бұрын

Not sure why I never thought of flushing walls to inside of frame opening. So easy for the track installation. Also, your method of adding the taper on the frame makes good scene to me. I can see the installation advantage there. As always, thanks for sharing.

@JonPetersArtHome 6 жыл бұрын

+Tom Pritchard Thanks Tom

@markspears1167 6 жыл бұрын

Tom Pritchard it’s been done this way by professionals for years. It’s convenient and efficient but you must have a square cut floor in the cabinet. There is no forgiveness if the cabinet is out of square.

@tompritch56 6 жыл бұрын

Thanks Mark

@dantaylor7416 6 жыл бұрын

HOLD THE TRAIN! I watched 6 times. HOW did you free-hand that straight line at 5:56? WOW!!!!

@dantaylor7416 6 жыл бұрын

Thanks Jake. Figured this must have been it. Still though, super impressive and skillful

@shantanarain2841 5 жыл бұрын

Always like the videos !! Even the ones I already seen after watching u it inspires me to do cabinets .. oh wait plywood is ridiculously expensive at the moment well I'll put those cabinets on the back burner for now..

@Crooks103 5 жыл бұрын

You could turn the cabinet on it's side to fit the drawer runners easier. Nice work.

@wildcatDIY 6 жыл бұрын

Jon- I’ve loved your channel for about a year but just realized I hadn’t said thanks yet. 👍🏻

@davidosborne668 5 жыл бұрын

Jon like the way you do the cabinets. What's the difference between high end kitchens and budget kitchens, besides the bench tops. I am about to start building a new kitchen in our house copying the measurements of the existing cabinets. We will then sell and build our new home. I would like to use the practice, to build all the cabinets of the new home.

@jilliansala139 Жыл бұрын

A Must Have!

@paralinkincubusninja5100 5 жыл бұрын

When your a woman but instead of watching makeup tutorial videos, you watch these kinds of videos about home improvement projects & electronics coz you find it relaxing. 😂

@DontknowSina 4 жыл бұрын

Same here

@jasonb4350 6 жыл бұрын

Nice cabinet, I also do the drawers in the same manner, it saves so much time and I have never had a failure. Sometimes I think people believe that because you put more time and make these fancy joints that there going to last so much longer.

@aaudain1 2 жыл бұрын

Great idea 💡 👍 👏 👌

@MentalPolution 6 жыл бұрын

Love the hot glue idea on the bottom of your drawers.

@danmaodi3940 4 жыл бұрын

Thank you for sharing your professional tips. How do you call the two pieces of hardware on both sides between the large drawer front and the metal box, I think it's not called hinges , thanks!

@JonPetersArtHome 6 жыл бұрын

Hi all , I’m still working on the plans I’ll have them on my site by tomorrow. www.jonpeters.com

@seanhenry4700 6 жыл бұрын

Thanks Jon! Great job, looking forward to the next steps.

@stevecollins9450 6 жыл бұрын

Great video and the explanation is spot on, Jon. Thanks.

@MrDiego718 6 жыл бұрын

awesome techniques, thank you master

@RobinCoomans 6 жыл бұрын

Nice one Jon,! I'm building a cabinet soon, so this is perfect timing :)

@RELUvance 3 жыл бұрын

5:57 He can freehand a line straighter than I can get with a ruler.

@aineakomba491 6 жыл бұрын

Amazing techniques that's good

@photog1529 6 жыл бұрын

Great video. Thanks, Jon.

@henrysara7716 3 жыл бұрын

Thy for sharing.

@henrywahlang3198 3 жыл бұрын

Luv the project👍

@manuelbou2576 5 жыл бұрын

Now I understand when people say they could've make same as store bought furniture better and For less. Its because they dont account for the thousands invested in all the tooling, equipment, space and experience.

@brightnuertey1451 2 жыл бұрын

Jon u are simply guy I love it

@FredMcIntyre 6 жыл бұрын

Nicely done Jon! 👍👊

@chuckdidonato5675 6 жыл бұрын

Jon, huge fan and looking to learn. One question I have is why did you opt for biscuits for the bottom rather than just continue with pocket screws? Thanks and please keep doing what you do,

@ar-tools 4 жыл бұрын

Nice work you are like the Harrison Ford of the wood!

@samhenderson2947 6 жыл бұрын

Tell us about the tapered drill bits. Haven’t seen those before.

@islandvoice8667 6 жыл бұрын

keep up the good work very educational video

@JeronimoJGC 6 жыл бұрын

Great Video, thanks for sharing!

@GettingtheTruthOut 6 жыл бұрын

I think using pocket hole screws for the face frame is perfectly acceptable because there little stress on the face frame and it eliminates complexity. I do like using dominoes or dowels (Jon uses bisquits which is good as well I just don't have a bisquit joiner). If you use dominoes, you can eliminate the screws altogether. I like that Garnica HDF, unfortunately, its not sold in very many places, at least the last time I checked a year ago.

@batcavebricks8623 5 жыл бұрын

Nice build! Perfection!

@barbara2donkor345 5 жыл бұрын

He drew a straight line free hand. This is impressive.

@markw3598 4 жыл бұрын

It is as straight as the edge of the wood that he rests his finger on.

@aprendamosconreneamaya725 3 жыл бұрын

Thanks

@fusionsherch888 6 жыл бұрын

Gracias y excelente, saludos desde México.

@brianm.9451 6 жыл бұрын

Love the work, Jon! I’ll be doing the same but mine are bathroom vanities. But casework is casework. :)

@cillyede 6 жыл бұрын

a very helpful video, thanks!

@manuabraham5832 4 жыл бұрын

കൊള്ളാം കലക്കി

@luissantiago2571 2 жыл бұрын

Great video. I’ve got a question regarding the front panel that connects to the facade. How do you screw it on? Does the handle screws really keep that drawer front panel together? My kitchen guy put a bunch of little double stick tape on the front to hold it together. He said it’s the handle screws that keep them held together. I think he’s full of crap and is trying to screw us. What say you guys? Do you have a video on this question? Thanks 🙏🏽

@jenniferbell4571 4 жыл бұрын

Curious about why you added the 30 degree angle after the face frame was assembled. Thanks.

@angelaslaney1514 4 жыл бұрын

So, OK I fast forwarded to the drawer slide fitting. A stick is used to set placement of the runners; alright - but just how and why does the drawer side fitting need to be in the centre of the drawer side? How does it relate to the stick length? Did I miss that bit?

@jzizzles7799 4 жыл бұрын

you skipped the part about measuring for the stick? It is in the middle? Just like the middle of the drawer?

@smile-ll3xn 4 жыл бұрын

Thanx jon

@GeoManTips 3 жыл бұрын

Nice tools

@akquicksilver 6 жыл бұрын

Excellent video John, thank you.

@akquicksilver 6 жыл бұрын

Oops! Forgive me for misspelling your name Jon.

@bahgheera 5 жыл бұрын

Awesome video, this answered so many questions. I'm still having a problem though with the slide not sliding easily. It's as if the opening is too narrow, but if I open it up by even 1/32" though, then it's too wide and the slide pops out on one side or the other. What am I doing wrong here?

@farrukhhasan7751 4 жыл бұрын

We don't have these types of tools in Pakistan so we can't do it. So good.🙂

@mikeseeno 6 жыл бұрын

NICE Shop!

@kennygee6627 6 жыл бұрын

Great video - nice work!!

@JonPetersArtHome 6 жыл бұрын

Thanks!

@beric2u 2 жыл бұрын

Hello. "What size ply was used for drawers, half or three-quarter inch?

@samsonvipparti8794 5 жыл бұрын

Nice information about it

@cillyede 6 жыл бұрын

Very good video

@befmx31 6 жыл бұрын

Man! how do you scribe lines free handed like that? Way cool.

@Megamannen 4 жыл бұрын

Hello from the futre! He is locking his fingers and just drags his hand along the edge. But it really looks well rehearsed, it impressed me too :p

@markw3598 4 жыл бұрын

@@Megamannen 20 or 30+ years of practice helps also.

@reaux5351 6 жыл бұрын

Hello Jon. Thanks for all your great info. I am falling into the woodworking rabbit hole. I am a cement mason by trade. Is it easier to build face frames first and then build your box based from there or was this just a specialty case.

@hwdconstruction5058 6 жыл бұрын

Reaux building the face frames first is standard in the cabinet industry. I hope this helps.

@anthonystrother9117 6 жыл бұрын

Nice explanations and work. How would you add a base or change the cabinet to make it a base cabinet?

@bosal2559 6 жыл бұрын

JON PETERS Good morning Very nice very good for your working 🌹👍❤️ I’m OTH SAL RIYADH CITY K.S.A 16-1-2018 Thanks so much

@MRrwmac 6 жыл бұрын

In your shop talk, you might mention how you installed the drawer slides without the Rockler tool?

@Bylga 6 жыл бұрын

Very Nice 😀

@freeland1959 6 жыл бұрын

I can do this! Just need to drop the doubts get moving.

@kypass 6 жыл бұрын

Here, here!!!

@orthotech9758 6 жыл бұрын

It looks overwhelming on video, but once you get into the flow everything will come to you. I study, I mean I literally study Jon Peters' work, and when I go into the garage I fall back on his teachings. You can certainly do this. It took us some time, but my wife and I built cabinets for our kitchen. You can do this. You've got this.

@Rick-tb4so 5 жыл бұрын

How much space do you have between the top and bottom of the drawer face to the cabinet opening ??

@nicksainsbury7152 5 жыл бұрын

Nice looking work but isn’t it possible to rebate the sides of the drawer sides to receive the front. It can be screwed through the fronts into the rebate then no visible screws when opening the drawers which ruins the finish in my opinion

@brianbraynen4178 4 жыл бұрын

What type wood do you use for your face frames and box? Great job by the way

@mhaz49 6 жыл бұрын

I like your addition of the hot glue to the backs. Is the face frame flush with inside of cabinet?

@markw3598 4 жыл бұрын

No, the sides are flush with the inside edge of the face frame, because he made the face frame first.

@Rick-tb4so 6 жыл бұрын

If your cabinet opening is 18" wide and your using roller bearing slides what width would you have to make your drawer to fit into cabinet opening ??

@pablorosas5781 5 жыл бұрын

Normally the drawer slides are 1/2 inch in thickness each so just to be safe extract from the opening 1 1/16 one inch and a sixteen and that's your drawer width

@Ray_Sellner 6 жыл бұрын

Another great video. The confusing part for me is you used a line for the bottom of the cabinet side slide, but used a centerline for the drawer side slide. Can anyone explain this procedure?

@TricksterTimbo 6 жыл бұрын

It's the exact center of both pieces, regardless of how he measured it. It's probably easier and more accurate to fit that 6" measuring piece in there then try to stuff the tape in there.

@RobinLewisMakes 6 жыл бұрын

Looking forward to the countertop

@baltimoreace 6 жыл бұрын

Can you explain the hot glue tip? You said for strength but I was wondering if you would elaborate more.

@elpresidenteadulftickler7273 Жыл бұрын

What's the brand of the jig?

@ken_9359 6 жыл бұрын

Would it be easy for a cabinet maker to design the pull out drawers they used to have on Helm's Donut trucks? I like the way they used to pull out the drawers and display their donuts but my idea was to apply it to a locksmith van so I can display my locks.

@kypass 6 жыл бұрын

Very nice cabinets. What species is the Garnica plywood?

@dunn423 4 жыл бұрын

Would you care to provide the details for the pneumatic vice that you used at 2:50? I’ve looked everywhere and can’t find one like the one you used.

@rockrolla395 6 жыл бұрын

i have a solution after see this video for my diy kitchen set 😄

@norwegianzound 4 жыл бұрын

What's an inch? Is it like what the Roman legions used to march in a day? Or the units used by the ancient Greeks to measure the dimensions of the Parthenon?

@nishatbeg4496 6 жыл бұрын

Good job

@deborahlopez7147 5 жыл бұрын

M going to be building some drawers in the near future and have heard about problems with drawer slides. Do you have a preference for any brands

@meetgerry 3 жыл бұрын

What is the name of the tool which was fitted on the pocket hole jig and the table - at 2:51 that you used to hold the board. Something like hydraulic clamp?