No video
He gave me a "160 mph" Racing Drone. I'M NOT WORTHY!
Рет қаралды 221,491
Күн бұрынUncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowita...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowita...
---
This guy sent me a racing drone that he says can break 160 mph. What's the secret? I dunno.... the parts are actually pretty normal. But it runs 6S 2700kv? How do you even do that without lighting the whole thing on fire?!?!
The mystery pilot's YT channel is: / @phantomfpv
Betaflight config diff for this build so you can get his PIDs and etc.
pastebin.com/n...
-- PRODUCT LINKS --
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
GetFPV has created a package listing for all parts needed to build this quad:
bit.ly/3cdpxzz
Frame: Lumenier Chief
* GetFPV - bit.ly/2Jx1nTU
Frame: Five33 Switchback
* United States Store - flyfive33.com/
* EU Store - flyfive33.eu/
Motors: T-Motor F60 Pro III 2700kv
* GetFPV - bit.ly/2UQHPPT
* Banggood - bit.ly/2UDauJr
Motors: Wild Willy Special Juice 2700kv
* GetFPV - bit.ly/2UVjubt
FC: Lumenier Lux F7
* GetFPV - bit.ly/2Q4UVV9
* RaceDayQuads - bit.ly/2Jvd4e7
ESC: T-Motor F55A
* GetFPV - bit.ly/34440WX
* RaceDayQuads - bit.ly/2ZECtvD
* Banggood - bit.ly/2ylQuSB
Camera: Runcam Racer Nano (Five33 frame requires Nano cam, don't substitute this one)
* RaceDayQuads - bit.ly/2ytNBQ1
* GetFPV - bit.ly/2R0cU2w
* Banggood - bit.ly/2WZSRoD
vTX: TBS Unify Evo
* Team Blacksheep - bit.ly/2URKbhs
* GetFPV - bit.ly/3az6UW0
vTX Antenna: Recommend stubby antenna installed per Five33 build instructions. Any "stubby" style antenna should do, such as Lumenier Axii, Foxeer Lollipop, TrueRC Singularity.
Receiver: I'm using Crossfire Nano but any micro-sized receiver that fits on the frame is fine.
Most or all links above are affiliate links, and I will receive compensation if you use them.
@JoshuaBardwell 4 жыл бұрын
I did NAHT go over 100 mph. Oh hai Mark. Sorry if you're seeing this upload twice.
@BoboQC_ 4 жыл бұрын
lol
@hateeternalmaver 4 жыл бұрын
yeah the blocking out was weird... ;D I don't undahstaaand life --.--
@junvervasig 4 жыл бұрын
yeah i also noticed it lol
@Bwp110 4 жыл бұрын
185 amps. Only the f55a Got the same quad on the floss frame with the tmotor f7 fc.
@jorgeromero4680 4 жыл бұрын
@NabiyFPV but we know it was less than 100mph lol
@licensetodrive9930 4 жыл бұрын
I love these "theoretical" speed tests :)
@Paul-Waldin 4 жыл бұрын
Ive seen videos done with a speed gun, ive legit seen 115mph, if 160 is out of reach the lord only knows but I wouldn't rule it out
@licensetodrive9930 4 жыл бұрын
@@Paul-Waldin I wouldn't doubt 160 is achievable with the right setup, because even the lowly 2 year old Emax Hawk 5 (my favourite quad to fly) can do over 100mph. UAVFutures - kzfaq.info/get/bejne/Y8WnZceBm83DoIE.html
@drkastenbrot 3 жыл бұрын
@@licensetodrive9930 quadmovr recently did 220mph
@MadDragon75 3 жыл бұрын
Andy RC clocked my main kwad at 78 MPH into, and 80 with the wind. Logically he decided that 79 seems to be the magic number for it. No speculation and an accurate speed test sold me on two Dolphin toothpicks so far.
@ChrisQuadFPV Жыл бұрын
My HGLRC Sector 5 went 90mph with the wind recorded from GPS.😲
@lowlyp0p 4 жыл бұрын
When the footage gets censored, you know it was a good time !
@Martin1519 3 жыл бұрын
I built a few quads for top speed. My fastest quad did about the same, around 160mph, but I used the holybro F7 55A stack, and the same APC props on Ledrib’s 2650KV motors. I also notice the frame will make a massive difference in top speed. You’ll need a hyper light, and aerodynamic frame to accomplish 150 - 160mph.
@dalewhitmore143 2 жыл бұрын
Holly crap dude that's one underrated ESC. The echo in the woods is freaking awesome!! Music to my ears...
@rolfmoerland9881 4 жыл бұрын
Imagine being that financially stable that you can build a expensive drone, ship it to someone to fly around, and to then not even bother putting a note with it or a name. Meanwhile I'm here with my Eachine EV100...
@ichista 4 жыл бұрын
Right I saved up for a wizard 220s and the 4 in 1 esc caught fire first take off now I'm left with nothing haha and I've even lost my job because of all this stuff going on
@scottpetersen6869 4 жыл бұрын
Rolf Moerland Same V1 EV100 with the distortion! Love them
@michaelwilkes0 4 жыл бұрын
@@ichista how old are you? can you build a quad from scratch? what parts do you need?
@rolfmoerland9881 4 жыл бұрын
@@michaelwilkes0 I'm 17, I live in the Netherlands, so every time I want to order something it takes 2 months, really breaks the flow when you can fly for 10 minutes, to be followed with a crash and having to wait 50 days again, but I love the community and just hanging out in servers. Current "setup" I have: Transmitter: Taranis QX7, Googles, eachine ev100, like mentioned, with a Realacc 5.8G 5dBi 50W Omni Directional antenna, and the dvr batteries: ZOP Power 14.8V 1400mAh 65C 4S Lipo's 2 pack charger: ToolkitRC M8 First drone I built was this setup: Frame : Anniversary Special Edition Martian 215 Fc: Matek F405-STD pdb: Matek FCHUB-6S esc's: HAKRC BLHeli_32 Bit 35A motors: Emax ECO Series 2306 vtx: Eachine TX5258(upgraded to AKK X2-ultimate, which arrived broken so I'm waiting on the Eachine VTX03) props: GEPRC 5040 receiver: FrSky R-XSR I asked for a tinyhawk S for christmas (well the dutch variant of christmas but not feeling like explaining it lol) and so I had that for a week, until a motor broke, waiting on spare motors now) And about 2 weeks ago I ordered the tyro119 because I saw Joshua was doing a build series, and wanted to get back into drones :)
@tech518b9 4 жыл бұрын
@@rolfmoerland9881 you can also order stuff from the EU if you need fast replacement for just a little bit more.
@AdrianoCasemiro 4 жыл бұрын
I never thought I'd see the day when Mr. Knowitall himself confessed that his hands were shaking! Great FAA agent impersonation. That was worth a laugh. Be safe, JB!
@ChainsawFPV 4 жыл бұрын
Love that after all these years, a single flight can still make your hands shake!
@Tom-gl1iw 4 жыл бұрын
If anyone is wondering about the world record, 202mph is the unofficial record held by quadstardrones (Ryan L on KZfaq) for a 6s quadcopter
@riccardo5753 3 жыл бұрын
miles per hour or km per hour
@drkastenbrot 3 жыл бұрын
quadmovr did 233mph recently. yes, mph
@Tom-gl1iw 3 жыл бұрын
@@drkastenbrot I just checked, Ryan got 257mph a few months a go as well, it's so crazy
@PhantomFPV 4 жыл бұрын
JB!!! Thanks a million brother!!! It was an awesome experience meeting you guys! Real stand up gentlemen!!! Thank you for everything and what a blast!!!👍👍👍
@JoshuaBardwell 4 жыл бұрын
Keep on making insane stuff dude. I hope you beat that record.
@PhantomFPV 4 жыл бұрын
Joshua Bardwell we’re gonna keep trying! You too! Stay healthy!
@HellaCopter 4 жыл бұрын
Phantom That was you bro holy crap 💩 I’m gonna have see more of this on your channel lol ! Hell yeah dude!
@PhantomFPV 4 жыл бұрын
Hella Copter haha! Yeah man! Joshua went out of his way for me! Yeah, gonna need to mount a HD camera to it next! Be safe and take care brotha!
@bentprops_ Жыл бұрын
@@PhantomFPVlol
@O.L.D_RC 4 жыл бұрын
That was hypothetically screaming fast! Flies really well, ie. surprisingly stable and locked in. She's quick, agile, and looks like a ton of fun. Thanks for the vid!
@HDgodfrey 3 жыл бұрын
So cool, I love the whole "sleeper" feel of it. Like pulling up in a normal car with "secret sauce" under the hood. It's surprisingly smooth. I just can't get over the 2700kv at 6s. I built a race rig yema frame and absolutely love it with 1 exception; bottom mount battery.
@OpaFPV 4 жыл бұрын
A note on how fast the quad changes direction is the low polar moment of inertia. With so much of the mass concentrated near the center of mass and center of gravity, a change in any direction does not require a lot of force (or moment). Very cool build!
@MANTA_FPV 4 жыл бұрын
10:34 i could see 191 Amps 😱😱😱
@peterzingler6221 4 жыл бұрын
Yeah about what it should be
@overratedsrtchallenger 4 жыл бұрын
Battery got raped
@mrparzivaull6108 4 жыл бұрын
That was awesome!! Couldn’t see the top speeds, for some reason a black box kept appearing when you hit the juice 🤣 excellent content!!
@STEDDiEFPV 4 жыл бұрын
This is why a light quad is a good quad! I’m glad you’re enjoying it. This would also fly great on 4s
@wtfDorianGray 4 жыл бұрын
Damn I wonder how does that feel when you find a whole freaking quad from anonymous guy in your mail box + it's an extreme build :D
@tomeaston2962 3 жыл бұрын
+ with top-of-the-line parts
@vogulz 4 жыл бұрын
14:04 “I wanna fly this” as he’s flying this 😂
@chiphodges9195 4 жыл бұрын
Your little intro skits are so funny! “You Got Talent”
@johnmaciver9903 4 жыл бұрын
Steele is one of the best quad guys out there. It is amazing to watch him fly. I've watched endless hours of RotoRiot as well. Thanks Bardwell, for all the great videos.
@Wildest_Wahoo 4 жыл бұрын
“WTF!?” B-roll shot was great!
@thebunkreport Жыл бұрын
Nice little workshop you got there. I like it. As for the drone, I cannot believe that something that small can go that fast and still be controlled with a transmitter. That's crazy. Even the US military is using drones like this and has plans to have the drone system in every soldier's kit. Imagine the lives that can be saved if the individual soldier knows exactly what he/she is going into? That's awesome.
@Extrem3Hunt 4 жыл бұрын
Never thought it would be such a big deal to go over 100Kph. Regulations in the US are harsh. I'm in the EU with a build doing almost 200Kph with flight times going upto 15 minutes... The only limiting factor I have is battery as I have is the 6s 75C Tattu R-line as battery shipping is a huge pain in my country.
@izaya8986 3 жыл бұрын
Conrad verkoopt ze ook 3dgn levertijd. Thank me later
@PhysicsOperator 2 жыл бұрын
MPH sus
@toddmusser8555 4 жыл бұрын
Wow! Good job to the builder, and that esc is doing some magical stuff!
@kyleray4952 4 жыл бұрын
"freestyle pilots should build race quads" Kababfpv: am I a joke to you?
@GiffysChannel 4 жыл бұрын
🤣
@Blockbuster2033 4 жыл бұрын
well, I'm doing that since my second quad about four years ago haha. Never understood why you would want these huge massive freestyle frames. They're just so unnecessarily heavy and big with no positives. Even on race rigs I always find a place for the GoPro.
@zephyr2278 4 жыл бұрын
@@Blockbuster2033 they're durable and their weight makes them smoother I guess? all i know is durability = confidence and confidence = better and more risky tricks
@notsure1502 4 жыл бұрын
6S 2450kv 123mph avg over 100yds here. 416g AUW. XT60 desoldered from ESC on third run. -10°F at the time...
@rafaels3552 2 жыл бұрын
Hi Joshua, it was me that sent you the quad by mistake. I meant to send it to myself. I will PM you my address so you can send it back to his rightful owner, me. LOL, crossing fingers this works :o)
@DavidReynolds-kr6yh 4 жыл бұрын
You sounded like a giddy school girl when you were talking about that first quad, and then when you got that second one given to you, you were like a naughty school boy playing with matches. That does look like a beast and dangerous, and of course so much fun.
@archer4922 4 жыл бұрын
I would’ve never thought to attempt 2700kv 6s lol. I’ve done 2400 6s but had a 85% cap on it. Makes me wanna go play with that quad again.
@scu-dub 3 жыл бұрын
Can you tell me what set up you had lol.....I couldn't imagine hitting those types of speeds and I would love to whiz by my girlfriend at 2mph and pop out to 100 in 3/4s of a second lmao
@archer4922 3 жыл бұрын
@@scu-dub my main race setup is the Flightone arc one frame (or Five33 switchback) my 30x30 stacks are all Flightone Revoltosd(running FalcoX firmware) Hobbywing 60a 4n1 esc my 20x20 stacks are Flightone Millivoltosd and Hobbywing 40a 4n1 esc. Motors are hyperlite 2207.5 1922kv running 6s with no throttle cap. Tbs unify pro vtx and runcam racer 3 Fpv cam with crossfire for the rx. Weight of the arc one before Lipo is 282grams and an infinity 1300 6s from pyroflip is 205grams or the 1150 and it weighs about 190g. The switchback builds have the same components but weigh about 15-25g less. The arc one tho is an absolute tank. In the last 20 months with them I have yet to break any carbon. I’ve had stacks ripped out in mid air crashes at multigp races and motors ripped off the arms and esc and still the frame laughed it off and survived. Lol. One race last December had a bad mid air where 3 motors completely ripped off the arms and one the motor base was still there but the stator and bell were never found, the fc was ripped out and I found it about 50 foot from the quad. 🤣🤣🤣🤣. Haven’t really put the switchback thru that hell yet but it feels almost as strong as the arc. Both awesome frames. Now my freestyle setup is similar, same electronics but use a Flightone dolphin 1 frame or the Skitzo nova frame.
@patregan 4 жыл бұрын
I used to fly 5S on 2600 kv F40 Pro V2 motors. Usually with a throttle cap of around 80% on the Taranis. Any more than that and most props would flutter at full throttle. At 80%, most props would flutter at full throttle when the battery was fresh. I did try 6S once. I did a punch out, and the Racekraft 5051 props made a terrifying noise. I let off the throttle, and it was fine for a few seconds, then Betaflight rebooted. I never tried 6S 2600 kv again. My build wasn't all that different than what you're flying, except the parts were almost 3 years old now! It looks like a fun build. Everything has come a long, long way since I tried this!
@troyschultzrc5286 4 жыл бұрын
That black out square messed me up watching your speed, LOL. WoW does that thing got some rip!!!
@noisetinker 3 ай бұрын
Funny watching this video in 2024 and going "hey I recognise that mystery pilots voice"... and it was! 😂
@ninjor8415 4 жыл бұрын
"I don't know how fast those run where" lol yeah ok, as you giggle like a school girl inside.
@TheGeordietheWitchandtheWench 4 жыл бұрын
I'm confused again, doesn't everyones copter go this fast? I'm using the same props, F80's and 6s. Looks like he's also using the same frame too :) AWESOME !!!!
@hankbizzo5 4 жыл бұрын
Think i seen a tear of joy around 7:10 talking about the motors!! Clear the fail safe so it doesn't for home someday.
@Mr.Freestyle. 4 жыл бұрын
I knew it was him by the osd and voice. Great pilot 👍👍
@PhantomFPV 4 жыл бұрын
Thanks my brother!
@bigrussfpvhell0 4 жыл бұрын
that's my guy. he builds ridiculous quads. great person as well.
@PhantomFPV 4 жыл бұрын
Thanks for the pro tips brother! So are you Big Russ!!! Hope you're healthy man!
@lazenbytim 2 жыл бұрын
I love the way you filmed, erm, trees and sky cuz this thing is so damned fast!! hahah
@unstoppable6047 Жыл бұрын
That's awesome. Some people behind the scenes sent you a real crazy kwad. Lucky bastard lol
@casparharte 4 жыл бұрын
**solved** My dudes please help me on rcgroups > Aircraft - Electric - Multirotor Drones > Beginner Multirotor Drones > Help! > Finding if it is a Quad or Transmitter failure I've been trying to fly for two years now, one failure after the other, this time I am reaching out for help. Story; My first quad (custome self made freestlye ) on rails that I loved was stolen on my fourth ever flight, after saving-up for the second (HGLRC Batman) it felt funny to me so sold it for a loss, my third quad was a diatone 2.5", it was uncontrollable to me, drifting every way, needed a proper tune, sold at a loss. Now my forth quad (emak tinyhawk freestyle) will not fly!! I bereave it or my transmitter is faulty. Any help much appreciated. Sorry for the long post, please DM me or find the rcgroups post Peace
@skree_fpv436 4 жыл бұрын
Hey bud, I left you some suggestions on your RC groups thread.
@casparharte 4 жыл бұрын
@@skree_fpv436 thanks
@flyingstonerfpv8736 4 жыл бұрын
Been watching your vids for 4 years learning and flying and that was best vid i seen all year man.. enjoyed the hell out of it
@SkyCandyVisuals 4 жыл бұрын
Wow I saw thebamps going upwards of 140amps on those punch outs! Nice. I think I'll be picking up one of those 4n1' to go in a 7 or 10" thx mystery man lol.
@HighVoltageMadness Жыл бұрын
You can build a quad like this in liftoff if you want to try to simulate it. Put the highest kv motors on 6S and high speed props.
@sillysmoothfpv3666 4 жыл бұрын
That FAA agent....priceless!!!!
@bigoilyguy 4 жыл бұрын
hell ya that agent seemd typical.. jerk
@bigoilyguy 4 жыл бұрын
mystery pilot?! more like a dream come true!
@PhantomFPV 4 жыл бұрын
True story my bro!!! Thank you for always supporting! You KNOW Imma be following your channel!
@arafpv9530 4 жыл бұрын
The intro 😂
@ZombotKing 4 жыл бұрын
What a guy, that's awesome. Let Anonymous Guy know your viewers and fans thank him as well for the opportunity to watch this. I hope all is well in these crazy times Joshua!
@yngndrw. 4 жыл бұрын
Hit 200A on your not-quite-over-100mph speedruns. Would love to see this in the hands Captain Vanover.
@gonun69 4 жыл бұрын
At almost 10 Volts, thats the kind of power I get out of my wall socket. Damn.
@yngndrw. 4 жыл бұрын
@@gonun69 It's even more than that because it's 6S. The peak values shown on the OSD for the 10:36 run were 22.7V @ 191.3A which is over 4.3kW - That's just a snapshot from that frame of the OSD so it could have hit a higher instantaneous peak!
@gonun69 4 жыл бұрын
@@yngndrw. I somehow read the wrong number and didn't realise that 10 Volt us way to low for 6S lol. Guess it's time to get some sleep
@siddharthshanbhogue5316 3 жыл бұрын
"OhMaGawd how fast is it going? I can't see!" Yeah right :P
@billyd78 4 жыл бұрын
6s is really great. I built a 5 inch recently with 2100kv and it's really fast. I can't even imagine 2700kv. I don't have a gps but I cover 150 yards in a couple of seconds and the sound is amazing. It makes children cry. Now I have to figure a way to measure its speed. Maybe off video and a measurement. 6s lasts longer than we're used to also (those who fly 4s), because higher voltage dc is generally more efficient for a given power output.
@peterzingler6221 4 жыл бұрын
What the hell is up with people first nurk with 12s 7inch now Joshua with part 107 crushing 6s
@licensetodrive9930 4 жыл бұрын
I think they're auditioning for a new Fast & Furious movie, part 13: Drone Runners.
@croeitusd5731 4 жыл бұрын
it's what happens when you're cooped up too long. people are bored
@Line-of-sight-cinema 4 жыл бұрын
croeitus d Passion+time on your hands=greatness and bored helps a smidge!
@Line-of-sight-cinema 4 жыл бұрын
croeitus d or murder both have been an outcome of this formula/combination of things
@abnormallynormal8823 4 жыл бұрын
So who’s gonna build the 24s x class?
@fpvwing 4 жыл бұрын
It is 1st April isn't it? 🤣 Loving the shoots of the sky.
@GsrMePlease 4 жыл бұрын
You could have used masking tape! That duct tape had to leave a mark. Lol
@rafaelbinotto 2 жыл бұрын
Well just hearing your quad on my cellphone... Because it's impossível to see anything... 😂
@PropagndaX 4 жыл бұрын
If you didn’t fly around your house so much the FAA wouldn’t have found you so easily 😂😂😂
@burtpanzer 4 жыл бұрын
NURK seems like a real nice guy, and to give you one of his latest creations... that's pretty cool.
@JoshuaBardwell 4 жыл бұрын
This didn't come from Nurk, it came from Phantom FPV.
@burtpanzer 4 жыл бұрын
@@JoshuaBardwell Hey, I did learn something. =D Well you both seem like good guys and I always enjoy your informative videos... thanks.
@scottopsahl3205 4 жыл бұрын
Nice! Fun to see you just having fun!
@DavidBarbarine 4 жыл бұрын
Thanks for sharing, was fun to watch. I really enjoyed the DVR footage too.
@bannablitz247 Жыл бұрын
As a professional radar detector myself, I can verify this was merely 160 kph or 99.4mph.
@flyingfrogfpv7205 4 жыл бұрын
This was totaly awesome to watch 😍 Have never seen such a good flying and tuned high speed setup!
@michaelwilkes0 4 жыл бұрын
I bought that damn tmotor f55a esc. It fried immediately on the bench during a motor tabs test at like 5% throttle. After a little haggling, I finally got tmotor to send me another one. It fried too after 3 seconds of hovering. The big protection diode failed short. I tried to get tmotor to send me a third one, and they suggested that i fix it myself, which was frustrating, but i did. I put a new diode on it, and then it fried 3 of the 4 escs after about 6 seconds of hovering. I swapped it out for the hobbywing xrotor esc with similar specs that vanover likes, and the quad flew fine and is still flying. I suggest using the hobbywing xrotor esc.
@caymanhilldesigns453 3 жыл бұрын
Thing sounds like a demonic elk. Love it.
@RadBeardFPV Жыл бұрын
This voice sounds sooooooooo familiar. Like someone that is relentless. Or a maniac…….. I could be incorrect tho!
@FullTiltClownShoes 3 жыл бұрын
8:45 looks like you were in the process of accidentally launching out of range, then the video jump cuts back lol
@johncarold 4 жыл бұрын
WoW I want one ! That is cool, I could have a lot of fun with this, you come up with some of the best things. Thanks for the video.
@granvillestanley 2 жыл бұрын
thank you i have learn so much from you over the years.
@xtkfpv5306 4 жыл бұрын
LOL that is awesome, I bet the most challenging part is not exceeding the 400ft ceiling, it seems like it could get that high real quick.
@dis11v78 4 жыл бұрын
I use a t-motor F60 PRO III 2207/2500kv 5S. Great video
@genjitsu7448 2 жыл бұрын
That is not a cheap quad you got there - but wow, it is nice! So crazy when you can fly from one end of your property to the other in a mere second or so! Also i did get a good laugh at your opening "FAA" duck tape on you r head... good stuff!
@ronbo422 4 жыл бұрын
The technical term is "cobbing the loudpedal", Joshua. It just gggooooooooeeeessss. :)
@TMacFPV 4 жыл бұрын
Love it! That's flyin'! 9:50 "when you punch the throttle it goes. . . It GOES!"😁🤩
@devilcfpv2621 2 жыл бұрын
Yea I run freestyle quads like this. W/ a Super 💪🏽strong 4-1 ESC. Big Capacitor, and premium Motors like the F80Pro 2200kv&2500kv... MCK 2100kv 3.0v. Etc. My freestyle quads go illegally fast, 130- 160mph range for sure
@mattwilson1305 4 жыл бұрын
I knew I recognized his voice lol what up Phantom!!
@PhantomFPV 4 жыл бұрын
Haha! What up brother!!! Dead give a way!
@mattwilson1305 4 жыл бұрын
@@PhantomFPV thought it was you, then saw the X-lite transmitter and was like ih yeah its Phantom lol so lucky and skilled pilot as well
@PhantomFPV 4 жыл бұрын
Matt Wilson haha!!! Dang Matt! You got them skills too brotha! Keep with it!!!
@vhfgamer 4 жыл бұрын
I was a little sad to see the video go away, but hey it's back! Yay! Now I can share it with people!
@rudymcfarlane 4 жыл бұрын
I can't see the quad but I could hear the noise. Should I just trust what you're saying? 🤣🤣🤣
@rudymcfarlane 4 жыл бұрын
Talking about the beginning. Only the camera moves from side to side
@official_airwolf3653 3 жыл бұрын
The Anonymus Guy? You mean JohnnyFPV?🤣
@CozziFPV 4 жыл бұрын
Question; if I have a similar setup except the enormous 50v capacitor am I going to break stuff if I try to modify my esc settings like this set up ?
@JoshuaBardwell 4 жыл бұрын
I feel like the capacitor is pretty important.
@PhantomFPV 4 жыл бұрын
It's important.
@CozziFPV 4 жыл бұрын
@@PhantomFPV thank you sir. i ordered some but not arriving til may 11th so right now i have a 25v on there. seems to be holding up for now but it's only 35a tekko32 esc ... posted a couple 6s vids w xing motors . loving 6s high kv. I have demon motors On the way for tmotor 45a esc ah yeaaaa
@PhantomFPV 4 жыл бұрын
CozziFPV very nice! Headed over to your page now to check it out. Over time with hard punch outs the wire between the cap and ESC will fail and completely burn up. Something to keep an eye on. The second it goes, your electronics will suffer on hard pitches.
@sleepyhallows3681 4 жыл бұрын
DUDE I love what you’ve done ! Your insane like me ! Haha I have a RC car that had a 3600vk motor 6 pole it was a 3s motor brushless , upgrades to a ZTW comp motor 6s / 8s cable depending on gearing etc. Well I’ve only used it on 6s and gone well over 120mph!! The rush on a RC car going that fast it’s FUN! And my next big job is a drone !! And since you basically done what I wanted I was wondering do you have a gofund me or something with instructions for all the parts used to build this beast!!
@icecorebaby 4 жыл бұрын
I have a 5 inch merica with t motor 55 amp 4 in 1 with t motor F80 1900 kv. Now that’s a fun beast to fly!
@xen4163 2 жыл бұрын
YO IM SUBSCRIBED TO THAT GUY AND I DIDNT EVEN KNOW IT🤣
@hkagiri5799 4 жыл бұрын
Really funny Bardwell...with the ducttape
@KCQuadTronX Жыл бұрын
oh my gosh i cant wait to get this far and fly like this i am getting better and better now thanks to you
@wilkokajko1 4 жыл бұрын
LOL the intro! :-D
@jfect2 4 жыл бұрын
Totally cool that you got jazzed up about that.
@FilipRadelic 4 жыл бұрын
People saying omg how does it run at more than 55A - 4in1 ESCs are rated *per channel*, not total!
@techx8075 4 жыл бұрын
I just finished this build. I'm a bit nervous to put Phantom's Pids in as the build is a bit different. Its working fine don't want to screw it up. What do you think load his configuration in the cli tab or just wing it. LOL
@JEMTAC 4 жыл бұрын
lol, the sound of the thing, great vid. You are an amazing pilot. Just ordered a Eachine Novice-II 1-2S to dip my toe into fpv, will I be able to learn to fly fpv with an Eachine Novice II?
@AarOnCoasters Жыл бұрын
those clouds looked cool
@janicksimonsen8156 4 жыл бұрын
Must have hurt to take that tape off your forhead😂👍🏻
@morozilkaair6315 4 жыл бұрын
during installation, do dualmono in the sound settings // and then in stereo you’re in my right speaker and another pilot in the left speaker)
@scu-dub 3 жыл бұрын
FAA lmao I love this vid....7:47 he was serious you can tell in his voice🤣.....
@marinehm 4 жыл бұрын
I about peed myself laughing so hard. Love your humor! I didn’t fly 500 feet in the air either. 126 mph! Daaammn!
@Darksagan 4 жыл бұрын
That kwad was badass..I need it. I hope whoever gave it to you sees my comment. lol
@nicolasazar96 4 жыл бұрын
Carbon fiber props for this one...would be awesome 😍
@devinc7425 4 жыл бұрын
I wanna see vanover attempt to race this
@CarbonGlassMan 3 жыл бұрын
The prop tips would be doing mach 1.3.
@DanRichmondFPV 4 жыл бұрын
Loved it! Great job on the opening!
@JohnDBloch 4 жыл бұрын
Hey Joshua! You should pick up some side force generators for that frame and see how they feel! I like the switchback frame a bunch. 👍
@mike94560 4 жыл бұрын
Early in my quad learning days I put a 6S on some 2450kv motors. Umm there was a fire. ESC (4in1), F/C, and VTX went up in smoke. The frame was damaged by the heat. And it smelled bad. Lesson learned. I now prefer individual ESCs. I rebuilt the quad. And 1750kv motors on my 6S quads.
@unstoppable6047 Жыл бұрын
It's funny how we get addicted to adrenaline. Then always looking for the new high. Alot of people shy away from adrenaline. Can't handle the senses overload. Also don't know how to stop fear from entering their mind. Anyways that kwad is awesome.
Joshua Bardwell
Рет қаралды 186 М.
Joshua Bardwell
Рет қаралды 278 М.