Bought this a couple months back and couldn't be happier. I can fit my Taranis, Headplays, eachine spectator screen, 10 lipos, small toolset, props, and strap my quad to the outside of my backpack. This was the missing piece to that puzzle, glad to see you reviewed this simple but essential product.

Thanks Joshua, appreciate your vid. Happy flying!

exactly what i was looking for!! thank you

Great idea! I like their FPV pack too, but a bit spendy. I just chatted with Think Tank and they say the X9 transmitter wrap should fine with the X7 radio but will let their marketing folks know to test it and put that info up on their website.

Just seen Bulbufets vid & you was walking across the great lawn in Louisville. Waaaaaaaaaaat? I ain't know u was n my backyard lol that's awesome

Great Review and Great Product, I just bought one !!

I have this thing .. love it .. even on the tx my tx still fits in my microraptor backpack .. I like having that extra layer of protection when my radio is in my bag...

Oh this thing is very usefull when you open you'r taranis ! no more stick torture ! ;) great product and great video !

"Battery straps - use sparingly!" Haha love it.

So I have an idea for new content if you are interested. ...I own a small house built in the early 70's in a subdivision so I think its a 1/4 acre lot or something with 6 trees, a car port, and detached garage. So I just don't really have room to fly a big 5" quad in my yard so I have built and flown my first two 3" quads and am really having fun again without having to pack all my stuff and go to the park with my Vortex 250 pro. I imagine that there are LOTS of people out there in the same situation as me because we can't all be blessed with the money to buy a 10 acre lot. So you could put together a few small 3" builds and set yourself up a really compact race course to show them off and contrast them against each other. I don't know but I love these little quads and the added bonus is that they might not do as much damage when they crash on the roof of the house like I did yesterday. lol. I built an armatan 130 clone with Flight controller and ESC's from the youbi XV-130 (I bought two youbi's but they both had broken frames with in two days of flying), emax 1306 4000kv motors, and a run came owl plus. Its nice but still not durable enough for me (i used nylon M3 hardware because thats all I had and it smashed into pieces on the roof yesterday). I also built an Atom V2 frame with the other Youbi guts and 1407 F20 motors which I don't recommend them as two motor shafts broke before my first set of broken props (rotorX 3040T).

Always appreciate your videos. Not sure that this is the first time you've used that fancy intro, but this is the first time I've seen it. I like it. "Hi, I'm Joshua Bardwell." BOOOMWACKWACKABOOMWACKACRASHBANGBOOMWACKAWACKATWEEDLEBOOM. 😉

Agree. This thing is kewl. But, I don't use mine on a day-to-day basis either. I stopped when I got my LowePro backpack (provides enough TX protection without the hassle of "daipering" ;-)). I was going to get rid of it, but yep, for lighter packing for travel I think I am going to keep it. I don't think I want to try and lug that LowePro on a plane. On a separate note, but related to TX care, be careful using that NewBeeDrone lanyard. There is a way it can unhook itself. It's happened more than once to me and the last time it caused a broken switch and a jacked up case. I switched back to the included Taranis lanyard. Shame too, because I like the easy disconnect and the quality of the strap itself.

thanks Josh just what I needed, I'm currently using an old Makita aluminum padded case and is way to bulky..

That's a good find I really like the small form factor . It looks like a good $20 insurance policy.

Will that fit in the LowePro? I am always concerned about pressure on my side switches. Great video. Love the channel.

Cool protection. I once made it just out of cardboard, but later moved to such a soft case you mentioned here. Its large enough to also fit my fatsharks. But the downside its large. Halfway fills my flying trolley :). Greets, Mario

Nice josh can I ask you what's your opinion on the walkera devolution devo 7 transmitter have you ever had the chance to try one by anychance josh

did I miss where you select which tx you want to purchase it for? one size fits all? any thoughts on fitting a Futaba 8FG?

I use an external UHF module that clamps to the metal bar on the back of the radio. Do you think this will still fit well enough as long as I remove the UHF antenna during transport? Thanks!

Great info. I'd love to hear more about traveling with quads. I travel a fair amount too. I hate checking bags. I'd be concerned they may never make it to the other side. Gate checks for small planes are at least controlled and you pick your bags up at the plane. Do you pack your quad(s) too? How many? Where do you fly them? Just find a vacant lot? What are the rules for lipos? Guessing you travel with those on carry on. Does security give you a lipo fondle because of them? Do you bring your charger? IMAX? I'd love to travel with quads (TWQ) a new quad acronym..you heard it first here...but I haven't figured it out yet. Thx!

Guess they had to call it a glove rather than a nappy :-) Thanks again Joshua!

very nice !!!

dang these are sold out at a lot of places..thanks Josh, this would be a really nice fit for me (back packer). Hopefully back orders won't be too long!

Joshua, the iNav config. tool gives us the ability to switch modes between plane and multirotor with an F3 board, so how about you demo it in a VTOL design? currently only OpenAreoVTOL can do this in one controller.

@Joshua Bardwell Fantastic video. Would love to see how you pack the quad. Also how to pack the batteries safely for an airplane. Even better, go over everything you take with you when you travel. What charger is easiest to travel with. etc. That would be extremely helpful.

Thanks Joshua! Please be careful of the LCD screen, the hook on the lanyard looks like it will scratch the screen cover quickly. I've been thinking about possibly using heat shrink tubing around the swivel portion of the lanyard. Your thoughts? Keep up the great work! - John

Now Banggood will get to make one of these! 😂😂😂😂

Thx Joshua, but this only seems to be available for the US :(

Hey Joshua, I have a rechargeable lion battery in my Dx6, would that be something that needs to come out of my tx when putting it in the checked baggage, and put in the carry-on the same as lipos? Thank you, -Jamie

Will it fit the qx7?

What about the antenna though?

what about the antenna protection? that's the most damaged element on taranis radio surely

Josh I recently watched all ur betaflight and cc3d videos nothing is working I need help man I'm sitting on 3 bricks a realteac 210 a falcon 210 and a wizard220 all useless because I cannot get betaflight or anything working can u please who can I contact for one on one?

Fits the q x7?

Are you still using this? I need to downsize. I cant fit all my gear in my backpack.

Not heard of that solution, thanks Joshua. You're still left with that silly antenna though, I'm surprised you haven't converted it to removable one, assuming that is possible with a Taranis.

Does anyone knows about something like this available in Europe?

will it fit on the q x7

How can I get one of these in the UK

order placed

Surely interesting, but my problem has been with the antenna and this doesn't protect it. There are many diy and 3d printed solutions that will do the same for less space.

Would this work for the taranis x7 ?

It looks ugly as sin IMO but who cares as long as it protects your TX right,good find. Thanks for sharing.

Are you Flying Mode 1?

Is this an infomercial? Sure feels like it.

will you review the runcam 3 camera

Just use original box from your transmitter :)

sold

it's hard (or not easy) to put the transmitter on the case

brand Recognitiiiiiiion say whaaaaat

Goes on like a diaper 💩

Too long to pack