Forging A Ball Bearing Twist Katana - Samurai Challenge
Рет қаралды 2,455,361
7 ай бұрынI forge a ball bearing twist katana with blue copper patina fittings.
#ytsamuraichallenge
Want to buy a knife from me? See what is available here in the link below!
Website - www.jpbladeworks.com/
Follow me on all my social media!!!
JP's Bladeworks Instagram- / jpsbladeworks
JP's Bladeworks Facebook- / profile.php
JP’s Bladeworks Twitter- / jpbladeworks
Jesus Perez Instagram- / jesus_perez
Amazon Lists of tools I use:
(These are Amazon Affiliate Links and this channel gets a commission with no cost to you)
Diamond Sharpening Stone Extra Coarse (220 grit) - amzn.to/49FKC3P
Diamond Sharpening Stone Fine (600 Grit) - amzn.to/40NAhim
Diamond Sharpening Stone Extra Fine (1200 Grit) - amzn.to/49HAveY
Axe Wax (Food Safe) - amzn.to/47yXLKt
Renaissance Wax (Non-food Safe) - amzn.to/3RjPfJR
Voting Link:
forms.gle/WWRgezVghsXdJkSe8
Sponsors:
Maritime Knife Supply: maritimeknifesupply.ca/
Knifeprint: knifeprint.com/
Mosa US: mosaus.com/
B.Kohn Knives: www.bkohnknives.com/
DIY Europe: www.diyeurope.eu
118Blades: www.118blades.co.uk
All Samurai Challenge Videos
Judges
Tyrell Knifeworks - • Forging a Silver Damas...
Black Beard Projects - • KAMA: Unconventional S...
Old Hickory Forge - • The Samurai Challenge!...
Faraway Forge - • Forging Tears of the K...
Competitors
B. Kohn Knives - • Forging A Katana In 5 ...
Heavy_Forge - • Forging a Traditional ...
JP's Bladeworks - • Forging A Ball Bearing...
Leppic Knives - • Forging Damascus Katan...
Njord Artisan - • 50 HOURS to make the S...
PJT Forging - / cwtddgxyjd
Red Beard Ops - • A NEVER Before Seen Tr...
Rainy Day Forge - • Forging Demon Slayer's...
The Rivers' Experience - • Making A Sword From An...
Tony Severio Knives - • A Hidden Tanto Walking...
Guest Judge:
Walter Sorrells: / @waltersorrellsblades
@JacobE-23 7 ай бұрын
Dont think I've ever seen a canister come off so cleanly, lol. The end result is absolutely stunning!!
@JPsBladeworks 7 ай бұрын
Thanks. Glad you liked it
@russward2612 6 ай бұрын
@@JPsBladeworksThat was really slick. Good technique.
@tfildaed 4 ай бұрын
Came off like Teflon. Lol
@CJ-pw8ny 4 ай бұрын
Mind blowing!! Never seen that before,
@Josh_Green44 4 ай бұрын
Exactly what I came here to say!
@fartzr.schmelli3351 7 ай бұрын
That verdigris finish on the copper bits is stunning! Gives the sword a "God of the Seas" feel to it. Amazing job dude! The whole build is beautiful!!!
@JPsBladeworks 7 ай бұрын
Thank you
@Duckrabbit_Forging 7 ай бұрын
Dude thats amazing! Blows my entry out of the water! The copper patina is amazing and it just fits together so well!
@JPsBladeworks 7 ай бұрын
Thanks. First ever copper patina. I think ill play with it more im the future. I really like the look of it.
@CentauriTTJ 4 ай бұрын
I swear the U.S probably has more katanas in it than Japan or maybe even the rest of the world.
@chubster3271 3 күн бұрын
definitely not
@Daniel-et5od 7 ай бұрын
Can we just take a moment and congratulate this absolute amazing guy who went through and replayed to most if not all comments. That’s amazing keep up the great work it looks amazing👍🏾
@JPsBladeworks 7 ай бұрын
I try to do all of them but the hate or shit talking ones make me want to reply in a negative way just to pick on them but i must stay professional 😅
@daleford8621 7 ай бұрын
That Damascus pattern on the blade is absolutely gorgeous! Like granite. Spectacular work, sir.
@JPsBladeworks 7 ай бұрын
Thank you. Im glad you liked it
@robertmooney1492 7 ай бұрын
I'm a bowyer/general woodworker and have never ventured into forging. However, I appreciate the craftsmanship of blade smiths very much
@efro4812 6 ай бұрын
Massive congratulations on the win this time, it’s been cool seeing your work just get better and better as time has gone on.
@JPsBladeworks 6 ай бұрын
Thank you. I appreciate the support.
@billwoehl3051 7 ай бұрын
According to John from Old Hickory Forge, length of the sword determined by user height, for his extra tall 6'4" or so frame, his is supposed to be about 30" blade.
@JPsBladeworks 7 ай бұрын
Im 5'9" and i was going for a 30" but forged a 28" and ended up cutting they trouble areas and ended up with a 24.5" which is just over the upper limit of a wakizashi or a kodachi.
@snakenbits4279 7 ай бұрын
Fun Fact: wakizashi typically was the blade used for beheading@@JPsBladeworks
@JPsBladeworks 7 ай бұрын
@snakenbits4279 this blade was used to behead a pumpkin
@Coffe- 7 ай бұрын
Awesome work man! Make sure you show off the work at the end of the video a little longer with some nice pictures. Right now the final result was just flashed by. Your work is worth showing off.
@rvsbladesnthangs 7 ай бұрын
Very true!!!
@JPsBladeworks 7 ай бұрын
Ill work on getting better at that. It was hard getting good pictures of such a long piece. Thats why i chose to use the collage. Im glad you liked the build.
@thanpham9529 3 күн бұрын
I want see more too 👍
@BlackBeardProjects 7 ай бұрын
Congrats on all the Damascus work, man! I absolutely love the ball bearing tsuba. And yeah, that copper patina is epic too. I knew from the first pic you shared that it would make for a killer thumbnail! Cheers!!!
@JPsBladeworks 7 ай бұрын
Thanks. Im bad at thumbnails but this one was easy since the black and blue make good contrast.
@corbeauyannis8254 7 ай бұрын
This is not damascus
@rotherthies 7 ай бұрын
DAMASCUS DOES NOT FUCKING EXSIST. PERIOD. This and every other metal like it are PATTERN WELDED STEEL. Damascus even when it did exsist was a fucking horrible metal. It was beautiful, yes. It could hold a razors edge, yes. However if you dropped it on the fucking ground it would shatter like glass. Why do you think they used silk to demonstrate its sharpness!? Because anything else would chip the edge. Damascus was a decorative steel. It had over 2% carbon content making it complete shit. Also just making a raw ingot could take up to 5 days of continuous work. It was a crucible "steel". Being made that way is what gave it, it's pattern. A pattern that no modern day Blacksmith has ever even come close to reproducing. One day very soon the FTC is going to weigh in on this and ban the branding "Damascus" cause it's a fucking lie, it's false advertising. No one is making Damascus. Ever.
@paladinsmith7050 7 ай бұрын
@@corbeauyannis8254 No one knows the real recipe for Damascus that knowledge was lost a couple hundred years ago.
@marikasdaughter6263 7 ай бұрын
@@paladinsmith7050 His point exactly... stop calling shit Damascus when it's not... NO one can make that stuff anymore.. This is Acid Etched billet stacking, I get it that doesn't sound cool but to lie just to market your shit product is sad as fuck. Just like Corbeau I too find it annoying when people call this garbage Damascus, some run of the mill backyard blacksmith couldn't ever make a Damascus blade, they were made by true craftsmen.
@oliverwinter8411 6 ай бұрын
This is truly a work of art! i love swords in general, and i love the Katana, but this took that to another level. Keep up the good work!!
@JPsBladeworks 6 ай бұрын
Thanks glad you liked it
@tommartin1223 6 ай бұрын
Totally agree...stunning job
@RainyDayForge 7 ай бұрын
Oh man! I was stressed watching the cold shuts from the twist. I’ve had that happen before too and it’s awful! I’m glad that you were able to work through it! 🎉🎉🎉
@JPsBladeworks 7 ай бұрын
I had a few and it sucked. Normally i would grind all of them out in between the forging process but the time limit had me stressing over getting done.
@outlawbladesandleather 7 ай бұрын
Man! I was never a fan of canister, but you pulled this off nicely with that twist. Love the oxidized copper. Brilliant dude! ❤
@JPsBladeworks 7 ай бұрын
Thank you. I play a lot with canister damascus. It gives a lot of freedom and headache to those that dont spray their cans for easy release
@redwolfknives3174 7 ай бұрын
Out of the park! Killer work bro! Gorgeous work!
@JPsBladeworks 7 ай бұрын
Thank you. Glad you liked it. A lot of stress went into this build 😂
@getinthespace7715 6 ай бұрын
This looks like a bunch of fun. What a beautiful finished product.
@JPsBladeworks 6 ай бұрын
It was loads of fun and stress.
@IceFoxHU 7 ай бұрын
I've never seen anyone use chemistry this efficiently in forging. Nice work, man!
@VPR672 7 ай бұрын
Forging is the cooler chemistry
@JPsBladeworks 7 ай бұрын
I wish i could do chemistry
@Sgt_Potato_1 7 ай бұрын
The way that billet slid out of the canister was just... The most satisfying thing I've seen in a long time. Wow. Don't you wish everything was that easy in metal working? 😂😂 my wife asked me what was wrong because i made a strange noise when i saw it.
@JPsBladeworks 7 ай бұрын
The key is luck sprinkle with a lot of prep...mainly luck 🤣
@LarsonPetty 7 ай бұрын
Yes, that was as impressive as anything else in the build.
@conqeeftador5559 Ай бұрын
It was bs lol , lots of editing in his video . There’s a reason why you never saw a can “ peel “ off like that
@redbullXfight3r 7 ай бұрын
I’m absolutely blown away by this amazing artwork! You’ve definitely earned my sub and I’m looking forward to watching more of your content!
@JPsBladeworks 7 ай бұрын
Thank you. I appreciate it.
@hoppersmith5176 4 ай бұрын
The time and effort shows, and the oxidized copper is so cool. The copper’s style would be cool implemented in a comic or manga.
@kzarnold3678 7 ай бұрын
The patina on the copper looks awesome nicely done with the blade work 👍
@JPsBladeworks 7 ай бұрын
Thank you. I appreciate you watching.
@no.6243 7 ай бұрын
It's beautiful, but I like the tsuba most of all. If you could figure a way to do that with all the other small metal parts instead of the copper, it would be even better. Maybe smaller bearings.
@loofy530 7 ай бұрын
Really dig the pattern, like flames licking the blade, and the oxidised copper is a really funky touch too.
@JPsBladeworks 7 ай бұрын
Thanks. Glad you liked it.
@byronkennedy7912 7 ай бұрын
Fantastic build with just hand tools and skill/knowledge. Great shipwreck on copper pieces. Thanks for the share.
@JPsBladeworks 7 ай бұрын
Thanks for watching. I appreciate it.
@PJTForging 7 ай бұрын
Dude! I think this has been one of your best entries yet! I love the blue finish! Beautiful sword. 🤘
@JPsBladeworks 7 ай бұрын
Thanks. That blue patina took the build to a whole different level. Im glad i took the risk because i had never done a copper patina before.
@richardbranton190 7 ай бұрын
That turned out absolutely gorgeous 👍 I love the twist bearing canister it's one of my favorite patterns. One day I'm going to get a press and try it
@JPsBladeworks 7 ай бұрын
Definitely try it. I have a chef knife on my desk from the same stuff. Cant wait to finish it up so i can check out how the pattern looks on a wider surface.
@zigorro3478 7 ай бұрын
That copper oxidation trick was really cool and came out stunning!
@tylercook9242 6 ай бұрын
Video was great thank you! It was so cool to see the whole process and the amount of work you did.
@JPsBladeworks 6 ай бұрын
Glad you enjoyed it!
@DamnWoodWorker 7 ай бұрын
this is just great! looks magical! 👍 Perhaps the defect appeared due to the fact that you assembled the forging unevenly and immediately completely filled the bearings and then tried to fill the voids with powder. When you start pulling or twisting the workpiece, I advise you to sprinkle borax
@JPsBladeworks 7 ай бұрын
Ive never sprinkled borax inside a can bit it might be a thought. I think it came from the twist. I dont think it was too noticeable in the video but i sheared it a little in my first twist. I over twisted and that caused parts to come up. I guess i pushed it back once i forged it back into a bar and missed it when i did my cut for the tip
@DamnWoodWorker 7 ай бұрын
@@JPsBladeworksYou definitely can’t put borax inside, but when you remove the casing or twist it you need to pour it in. Most likely, there was simply emptiness inside and the metal was not welded. But the katana is great
@JPsBladeworks 7 ай бұрын
@@DamnWoodWorker I borax all my billets after they come out of the casing. I just dont show it on the video because it just lengths an already long video. Normally Canister damascus comes out with surface cracks so its always safe to pour some borax even if its not needed. Thank you for the advice. I appreciate it.
@D0ses 7 ай бұрын
why do modern sword makers use so much metal? i watched a japanese master make a Katana n the amount of metal they use is literally EXACTLY the right amount. of course they do it all by hand but still makes me wonder why modern smiths use so much metal
@samcoolbaugh7754 6 ай бұрын
Different smiths have different reasons. Most call it sacrificial steel. Make a mistake, cut it off, still got steel to play around with. Not to mention when doing certain types of damascus, the kerf loss can be extreme, especially with feather damascus for example.
@gwcstudio 6 ай бұрын
I often make extra billet to produce cooking knives, kiridashi, etc. may as well! Also, matching gane in a wakizashi or tanto can be cool. You can get quite precise with steel quantity if you want to. In Japan steel is a valuable natural resource and in the US its cheap and plentiful. Go price some hitachi blue paper steel compared to a chunk of 1095.
@RileyPierce_ 6 ай бұрын
It all depends on what steel you use. Most damascus must be cut to shape, not forged, because that would mess up the pattern. Some people like extra steel to have the freedom to change the blade on the fly. That japanese Smith knew what he wanted to do and probably made many before.
@dimasmokko7016 6 ай бұрын
Cause they all stupid content creator with only online experience 😂😂
@sudacris1 6 ай бұрын
Because material is more ready and not as costly. Plus you can reuse things you cut off and what you grind off if you want. 💯
@hunt_trap_fish 11 күн бұрын
The blue finish was amazing. And the pattern was awesome too!
@JPsBladeworks 11 күн бұрын
Thanks. Glad you liked it
@rickyvilla9213 2 ай бұрын
Absolutely Stunningly Gorgeous piece of Art
@TyrellKnifeworks 7 ай бұрын
Great build, JP!! Truly one of your best! Kept me engaged the whole time! 👏🏻
@JPsBladeworks 7 ай бұрын
Thank you. Glad you liked it. It was a whole new experience making a katana. Plenty difficult with all its pieces involved.
@MyScreenNameIsTroubledOne 7 ай бұрын
I don’t think I’ve ever seen anyone smash a can vertically like that for the first press. That was neat. Looked like the can almost peeled itself off right then.
@JPsBladeworks 7 ай бұрын
I always do top first to weld it because its pressured from all sides since the can is one solid piece. I used to do sides and they would crack or pop and create unwanted bulges and cracks at the end of the finished billets.
@MyScreenNameIsTroubledOne 7 ай бұрын
@@JPsBladeworks it appears to work out great, love that pattern! Well done sir!
@JPsBladeworks 7 ай бұрын
@@MyScreenNameIsTroubledOne thank you. I appreciate you watching.
@ArchangelsSword 5 ай бұрын
That's one of the coolest patterns I've ever seen.
@brandonalborg4807 7 ай бұрын
Amazing work, craftsmanship, and insane detail.
@JPsBladeworks 7 ай бұрын
Thank you
@alihuseynakhmadov8672 6 ай бұрын
Hello from Azerbaijan 🇦🇿🔥
@JPsBladeworks 6 ай бұрын
Greetings!
@AnargiT-2.23 7 ай бұрын
Hello everyone from Armenia 🇦🇲
@JPsBladeworks 7 ай бұрын
Grettings from Florida
@avet_sargsyan 7 ай бұрын
Բարև եղբայր!
@antontopchan1399 7 ай бұрын
Барэв)
@user-dm6ew5ed3b 7 ай бұрын
Hello from Ukraine)
@pedrohenriquesilvadesouza4531 7 ай бұрын
Olá Brasil
@Ibaneddie76 6 ай бұрын
You are an amazing artist! I would love to have a Katana like that!
@manjisaipoe517 6 ай бұрын
Beautiful finished product, a true work of art.
@JPsBladeworks 6 ай бұрын
Thank you
@Linchtheoryst 7 ай бұрын
Hello everyone from Ukraine ❤
@JPsBladeworks 7 ай бұрын
Greetings from Florida USA
@user-cc1nz5yl1t Ай бұрын
Hello from Suriname
@jacobsummers1530 Ай бұрын
Greetings from west crater , the moon
@yoodahlah1440 Ай бұрын
Im from my mother also
@andrewneilson227 Ай бұрын
The patina on the copper is such a unique touch!
@wesleykeene 3 ай бұрын
i bet this weapon will keal stunning work mate, im no expert but i can say some of the best work ive ever seen!
@BenjaminHodgens 5 ай бұрын
Killer look! I may try this now that I have figured out how to patina copper. The last one I did was just like this with a sanmai blade, and fire-red copper for everythint.
@JPsBladeworks 5 ай бұрын
I want to try a fire red version with a different pattern.
@jasonshrout8921 7 ай бұрын
Beautiful execution and end product. Looks like something from Warframe. Your method definitely adds depth and character. Thanks for the video.
@JPsBladeworks 7 ай бұрын
Glad you like it!
@siddbastard 6 ай бұрын
yea, a Zaw, before gilding ^^
@philochristos 7 ай бұрын
Nice job on that sword. I love the patina you put on the copper parts.
@JPsBladeworks 7 ай бұрын
Thank you. It goes well with all the black on the sword.
@NjordArtisan 7 ай бұрын
Fantastic work man! I love the look of that copper patina, definitely gotta try that too. And the way that canister came off was soo satisfying 🙌
@JPsBladeworks 7 ай бұрын
Thanks bro. Its all about the prep work.
@hawkeye7834 7 ай бұрын
That's a awesome build hope u do win I been watching u from the beginning and u have came a very long way and doing a great job at it. Thanks for sharing
@JPsBladeworks 7 ай бұрын
I appreciate you watching for so long. We have some tough competition but i appreciate the kind words.
@FaicalSilarbi 5 күн бұрын
So That's how the Moonveil was made!
@zacheryhawks2715 7 ай бұрын
wow . just wow ... I love the copper .. it makes the blade pop !
@JPsBladeworks 7 ай бұрын
Thank you. Glad you likes it
@straightjacket308 4 ай бұрын
Absolutely beautiful!!! Great work!
@JPsBladeworks 4 ай бұрын
Thank you
@jimgillett1184 7 ай бұрын
Beautiful sword sir! Very nice work and the removal of the canisters was impressive . Great job brother
@JPsBladeworks 7 ай бұрын
Thank you very much!
@SmittyTutDesigns 7 ай бұрын
Dang man I LOVE the Patina!! The colors and whole build are just Awesome!! 😃👍👍👍
@JPsBladeworks 7 ай бұрын
Thanks. I took a gamble with something i never tried before and it seems to have paid off. Did you make a video on your build? I saw the pictures in the group and they look awesome.
@SmittyTutDesigns 7 ай бұрын
Oh man it definitely paid off- the greens are so vibrant, it looks beautiful and a good gamble to take! And yeah I just posted up my build video (it's a bit on the long side), but thank you so much, I wasn't sure if going a bit non-traditional would be ok but seems like some people are diggin them haha!! 😁🙏🙏
@JPsBladeworks 7 ай бұрын
@SmittyTutDesigns most guys went non traditional because if everyone went traditional it wouldnt be as entertaining or fun. I look forward to watching your video soon.
@SmittyTutDesigns 7 ай бұрын
@@JPsBladeworks Yeah that was my thought process haha! And thank you so much! 😁🙏
@jeffreyhoops3611 7 ай бұрын
Beautiful blade! You have come a long way from your first videos, keep up the good work. Definitely a worthy contender.
@JPsBladeworks 7 ай бұрын
Thank you. Glad you liked it. I appreciate you.
@samarchist74 7 ай бұрын
Greetings from Iceland. This is just beautiful work sir! I love the copper!
@JPsBladeworks 7 ай бұрын
Greetings from Florida. Im glad you like it!
@aliabass6560 5 ай бұрын
The reason for this problem that led to the sword being cut and shortened is that you did not cut the steel into more than one piece and re-melt it and then hammer it.
@JoeyAtilano 7 ай бұрын
Great job. Love the patina on the fittings.
@JPsBladeworks 7 ай бұрын
Thank you
@harryvanniekerk7269 3 ай бұрын
I was with you in your adventure and I liked how the ball bearing damascus turned out in your final product. 😃
@RainyDayForge 7 ай бұрын
The ammonia patina on the components looked great! The blade steel 😍 superb.
@JPsBladeworks 7 ай бұрын
Its the first time i do a patina like this. Im glad it came out so well.
@mikewatts1533 7 ай бұрын
Very beautiful build thank you for sharing.
@JPsBladeworks 7 ай бұрын
Thank you for watching
@nickp3173 Ай бұрын
Not bad! Lots of luck in your future projects!
@JPsBladeworks Ай бұрын
Thank you. I appreciate the support.
@rayadin5114 Ай бұрын
That was beautiful ❤ wish you well being and prosperity so that we could see stuff like this more & more 🎉
@JPsBladeworks Ай бұрын
Thank you. I appreciate it.
@cr0wgh0st 6 ай бұрын
Just atopping by because that sword is beautiful. Great craftsmanship!
@JPsBladeworks 6 ай бұрын
Thanks for stopping by.
@jrmako7933 3 ай бұрын
I want it 😮😂 Your work is incredible!
@wilfredodiaz3445 Ай бұрын
Beautiful blade and an awesome looking finish with the pitina.
@JPsBladeworks Ай бұрын
Thank you. Glad you liked it.
@drumsanddrumming8289 5 ай бұрын
Wow! Super interesting method with super attractive results. Great job! 😊
@JPsBladeworks 5 ай бұрын
Glad you like it!
@azizxonkarimov8432 9 күн бұрын
wow amazing bro ! good job 🤗
@JPsBladeworks 9 күн бұрын
Thanks
@AestheticAbe 4 ай бұрын
Glad you finally tried pvp! Been watching you since day 1. I’m 2100 in arena and I lead 2k+ rbgs so if you ever need help let me know!
@benmoore5988 7 ай бұрын
Gorgeous piece of work!
@JPsBladeworks 7 ай бұрын
Thank you. I appreciate it
@OldHickoryForge 7 ай бұрын
man that is a beautiful sword! nice Job on the canister as well. wish all mine came off that clean! very well done!
@JPsBladeworks 7 ай бұрын
Thank you. Its all in the spray paint...and a bit of luck...okay a lot of luck 😅
@slicksport2000 7 ай бұрын
Beautiful sword man! I like the use of tea to darken and the patina on the copper.
@JPsBladeworks 7 ай бұрын
Thank you. Glad you liked it
@thorneworks 7 ай бұрын
Cool blade man. Love the ship wreck patina.
@JPsBladeworks 7 ай бұрын
It was my first time using it and i gotta say it transformed the build. The contrast is beautiful.
@theresagoin5682 7 ай бұрын
Beautiful work stunning piece
@JPsBladeworks 7 ай бұрын
Thank you
@user-qe5ii7my6o 2 ай бұрын
Very nice work
@roberthudgins7035 3 ай бұрын
Outstanding, experience craftsmen are truly amazing .
@JPsBladeworks 3 ай бұрын
Thank you for the kind words but im very much a newbie
@roberthudgins7035 3 ай бұрын
We all have our skills , but yours is truly an art form . I would love to have one of your blades . All the best to you .
@davstark8666 Ай бұрын
What a beauty
@JPsBladeworks Ай бұрын
Thank you
@Based_Face 3 ай бұрын
Thats so awrsome. I want one
@JPsBladeworks 3 ай бұрын
Glad you liked it
@merlindraws3616 6 ай бұрын
i've heard that rounding the corners of your bar before you twist it will help reduce those cracks and blemishes. file them off, or hammer chamfers on them, then heat the bar and twist. you dont need to turn it into a perfect octagon, but knocking down the corners helps
@Disbro10 15 күн бұрын
This blade is so awesome, I have watched this video so many times now. It would be awesome to know how to do this.
@JPsBladeworks 14 күн бұрын
Glad you liked it. Ive been thinking of re editing the video and adding voice over but im not sure if ill do that or not yet.
@user-ir9op1vj9m 7 ай бұрын
This content is incredible and you show almost every step along the way this stands out from the other creators. I am a little more interesting in the explanation on how things are done something like what foureyes furniture would do.
@JPsBladeworks 7 ай бұрын
Thank you for the kind words. Ive never heard of foureyes funiture but ill check him out. I enjoy watching and learning how to build things.
@not-stefan-not8312 3 ай бұрын
greate job man,looks very good
@JPsBladeworks 3 ай бұрын
Thank you
@mcrich1978 7 ай бұрын
Absolutely beautiful! ❤
@JPsBladeworks 7 ай бұрын
Thank you. Glad you liked it.
@richardsteinbergmakingknives 7 ай бұрын
Great video, really well done JP.
@JPsBladeworks 7 ай бұрын
Thanks
@overratedzae235 3 сағат бұрын
I noticed at the beginning the top of the can completely split open.. how did you compensate for that? Or did you start over?
@TerrenceCalnimptewa 4 ай бұрын
Tremendous work
@JPsBladeworks 4 ай бұрын
Thank you
@HeavyForge 7 ай бұрын
Bro! Outstanding work. Blade made easy work of that pumpkin!👌🏻
@JPsBladeworks 7 ай бұрын
Thanks. I shall now dub the blade "The Pumpkin Slayer" 😎
@pauls6448 3 ай бұрын
I know nothing about forging. I don't know why it was on my feed, but i watched it all and enjoyed the end result very much. I will definitely subscribe to your page.
@RedBeardOps 7 ай бұрын
Nice work man! Canister came out great!
@JPsBladeworks 7 ай бұрын
Thanks. The past 2.5 years of canister builds is finally paying off.
@StanciyaMir 6 ай бұрын
Какая красота. Моя мечта детства это быть кузнецом. Мне 33 года и я ещё не сделал ни одного шага к этому😢
@JPsBladeworks 6 ай бұрын
Im 29 about to be 30. Its never too late to play with fire 😁
@blaisechonister8584 4 ай бұрын
I wish I could afford one like that. What a work of art.
@JPsBladeworks 4 ай бұрын
Thank you
@benparrish4422 7 ай бұрын
Beautiful weapon!! Well done!
@JPsBladeworks 7 ай бұрын
Thank you
@TyinAlaska 6 ай бұрын
I love the color. It's incredible. I would have died to see that color show up in the blade.
@JPsBladeworks 6 ай бұрын
I wish i knew how to do that. The bright blue makes the pattern in the sword look a little dull in my opinion
@manythingslefttobuild 6 ай бұрын
Beautiful sword! Congratulations on all the success with this video, and canister Damascus.
@JPsBladeworks 6 ай бұрын
Thank you very much!
@heavyshoulders 7 ай бұрын
Love it!!! Nice work dude👊🏼👏🏼
@JPsBladeworks 7 ай бұрын
Thank you. Glad you liked it
@sniperlemming 7 ай бұрын
that's a really cool pattern. Very nice sword. Well done.
@JPsBladeworks 7 ай бұрын
Thank you
@tonymartin2116 7 ай бұрын
that blade looks amazing!
@JPsBladeworks 7 ай бұрын
Thank you
@sebastianilabaca 4 ай бұрын
Beautiful
@JPsBladeworks 4 ай бұрын
Thank you
@lovejcdc 7 ай бұрын
I absolutely loved your blade! I definitely voted for it and proud to do so. If you were thinking about a name I would recommend Hornets Nest. The guard pattern looks just like a Hornets nest. Anyway good luck to you.
@JPsBladeworks 7 ай бұрын
That sounds dope. I appreciate the vote as well.
@shakesforge 7 ай бұрын
This build looks great
@JPsBladeworks 7 ай бұрын
Thanks
@Nams47 4 ай бұрын
Fair play to the dude for his technigue of getting the canister off perfectly, most people I see chisel it off and risk ruining the whole thing
ТНТ4 Shorts
Рет қаралды 4 МЛН
ジャパニーズインダストリー / Japanese Industry
Рет қаралды 1,3 МЛН
미스터 프로세스 Mr.Process
Рет қаралды 1,9 МЛН
ĂN VẶT TUỔI THƠ 2023
Рет қаралды 86 МЛН
Русская теленеделя
Рет қаралды 4,6 МЛН