Jumper T Pro // Goes Both Ways // ExpressLRS Flashing Issue
Рет қаралды 14,121
Күн бұрынThis gamepad transmitter has more to offer with 1Watt of ExpressLRS power, with a catch.
RaceDayQuads - bit.ly/3onn1z5
NewBeeDrone - bit.ly/3GpTdYO
MakerFire - bit.ly/3J1Udnz
RotorVillage - bit.ly/3uFkPab
AliExpress - bit.ly/331xfxC
TweetFPV T Pro Flashing Recovery - • Jumper T-pro Internal ...
ExpressLRS T Pro Flashing Recovery Write Up - www.expresslrs.org/2.0/quick-...
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► Radio I use the Jumper T-Lite bit.ly/3ohjEXp
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Emax tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► AliExpress bit.ly/3vMbOZK
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Emax - bit.ly/3sn3AGm
► MakerFire - bit.ly/37TAmGo
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc
@omarlittle5802 Жыл бұрын
Hey Nick! Thanks for the great content!! I'm sure you've figured this out by now, but if you press the SD card spring release it comes out about 2mm. The just tilt the antenna a little so it's barely touching the SD card, the press your thumb down on the card while pushing the antenna back down (down so the 2.4 GHz sticker is parallel to the deck and the antenna is prepared for storage) and sliding your thumb outward. The card slides out smoothly. To put it back, and avoid cramming it in the in-between, you can keep the antenna down (storage position) and use it as a guide to slide the SD right in! Cheers!
@kd2rdhlarry571 2 жыл бұрын
They got so much right with this radio for my taste. The color, the batteries, the small screen are all nice. If they could have their switches like the zorro or t-lite ones, I’d be buying for sure.
@peteyfpv2217 2 жыл бұрын
I had one on preorder until I saw the switch setup and I canceled it and preorder iflight comando 8
@FrenzyIncarnate 2 жыл бұрын
@@peteyfpv2217 why tho? This has same switches and layout with commando and that top 6 button switches
@airplanenut6242 2 жыл бұрын
I switched to hybrid pinch too! Based off an old video Steele did talking about it. Took a few months to learn, but it feels better now than thumbs ever did for me
@hillbillyfpv9623 2 жыл бұрын
I don’t even care about the radio.. you ripped the crap out of that whoop!! 🔥🔥
@deadbyteDrones 2 жыл бұрын
Hi Nick, the Internal ELRS module will soon be able to be flashed via FTDI/UART without having to edit any code.. just an additional way to recover it should you choose to go that way.. because options! :)
@diyola808 2 жыл бұрын
I been flying with jumper t-pro for couple weeks now so far no problem I’ve flash the module with elrs 2.2.0 and it working great
@JP-qq2kn 2 жыл бұрын
I was very interested in this radio, until all the issue videos started coming out. Ordered a Zorro, and I think I made the right decision.
@mampe4122 2 жыл бұрын
I started flying planes years ago using thumbs. Then got into helis, and basically had to pinch to get more precise. I'm warming up to the gamepad style radios.
@TweetFPV 2 жыл бұрын
Thank you for the kind words.
@chrisB_OG 6 ай бұрын
thank you for this video!
@Adam_Carbone 2 жыл бұрын
I like the jumper t-pro, I wish that the functionalities of the T-pro could be built into the t-lite formfactor with an upgraded antenna, that would probably provide for a pretty good setup. That is nice though that they include that little adapter attachment to put your own antenna on the transmitter. Does look like a hybrid between the Tango 2 and the DJI controller very much. I would say that tis is targeted more towards quad pilots and not airplane pilots only because the trim sticks aren't as easy to use without looking as opposed to the typical up down, left and right click switches which can be nor easily distinguished. Still seems like a great radio for the price and the overall formfactor is nice.
@cliffandrews 2 жыл бұрын
Well I was going to buy this radio, thanks for the heads up.
@rotorvillage 2 жыл бұрын
Thanks for the link! :)
@NickBurnsFPV 2 жыл бұрын
I try to keep in mind our norther friends. You can always hit me up when you have a product or get a product I have a video on. I don't mind adding to the video descriptions.
@rotorvillage 2 жыл бұрын
@@NickBurnsFPV Epic, I'll keep it in mind. There's always tons of stuff arriving regularly.
@steezyfpv7620 2 жыл бұрын
Thanks for the great review! Was hoping for more from this radio its just a little half baked, from the sd card slot basically under the oversized 2.4ghz antenna, to the weird switches and buttons, the module powering without the radio turned on, even that removable antenna mod looks like an after thought... You'd think this stuff would get picked up in testing.
@gmivisualsjason3729 2 жыл бұрын
Excellent
@RubyS.1 2 жыл бұрын
I had pre-ordered the pro so I got it pretty early before there were any videos on the updating issue. I was lucky and was able to exchange it for the Zorro which I really really like alot.
@bread12678 2 жыл бұрын
I just returned my T pro back to RDQ and have a zorro on order now. I had the same problem that Nick had with the module being powered on 24/7. I also didn’t like how Jumper released the T pro and AION module without giving samples to the ExpressLRS devs. Hopefully my Zorro comes soon!
@RubyS.1 2 жыл бұрын
@@bread12678 your going to like the Zorro alot I think. Pains me to say it cause I like the Tango 2 alot and mines worn out but the Zorro feels just as good of quality it's really nice
@QBeeZee 2 жыл бұрын
As far as thumbing I've recently done the same thing. I feel more in control with the hybrid pinch. It's only been a week but I can already feel a big difference. I'm not as fast but I'm not crashing as much.
@Quadcopter101 2 жыл бұрын
I have to pinch. My hands (and thumbs) shake too much, especially after my morning pot(s) of coffee. My index finger helps steady the shaking.
@MrCrowleyandhisdrone 2 жыл бұрын
Nice flying and excellent vid, thumber here lol
@madprops526 2 жыл бұрын
Pinching on the pitxh/roll stick has way improved my skills..took a second but I cant fly with my right thumb now lol. I wanna get this radio...my og t-lite is acting funny sometimes when I turn it on...for like 2hrs it wouldnt even turn on then like magic, it worked later that day....
@elishahodgson1635 2 жыл бұрын
Hi Nick, I just built a whoop with the happymodel F4 ELRS 2.4 1s board and the vtx is stuck on raceband channel 4 at 25mW. When I try changing the power output my OSD flashes or a split second "LV0" instead of 25mW then back to 25mW. I've been trying to solve this issue for a few days now, please could you suggest a solution? Thanks
@airdevil21 2 жыл бұрын
Thanks for the review Nick. Are the gimbals different than that from the t lite?
@NickBurnsFPV 2 жыл бұрын
I don't think so, but we would need a side by side to be sure.
@Justintagious 2 жыл бұрын
I unfortunately will be returning my T Pro Internal ELRS and replacing it with a new one. The speaker was super distorted and with antenna raised at all would cause my stick positions to change on the radio and would certainly cause my drone to fly awkwardly. I hope my new replacement is fine 🙂
@NatanRufino Жыл бұрын
Hey bro! The link you've shared to fix the flash problem is not working... could you please update that? Thanks a lot!
@soursham Жыл бұрын
Wow this whole time I thought the jumper module was 1Watt. I had it since it came out😂
@406fpv9 2 жыл бұрын
It's funny, I use to play video games and now I fly quads but I'm a pincher. I got so use to that when I tried to play a game with my son. I couldn't barely play. I had to invert my controls and it took me a while to get use to just using thumbs again. Lol
@Zlowmoo 2 жыл бұрын
I have a suspicion that these thing will end up in a giveaway in the near future. (dibs on the ELRS one lol)
@StuckOnAFireHydrant 2 жыл бұрын
How's the hybrid pinch on this one compared to the radiator zorro? Like is it more cramped or your hands at a different angle? Also is the angle of the handles more or less extreme than the zorro? I think one of these are the radio for me, but I'm still on the fence over the gamepad style, but these do appear to have less on an extreme angle on the grips than the t-lite
@NickBurnsFPV 2 жыл бұрын
I prefer the greater angle of the zorro, I feel more comfortable.
@deltaknown2 2 жыл бұрын
What's the elrs module with diamond antenna called? Is it compatible with the old jumper t lite?
@diggsit69 2 жыл бұрын
Nick, if I get The Xpress ELRS version and I have frsky transmitters/receivers in my Emax hawk pro type drones, so what model/ version should I get that will also work with frsky transmitters /receivers as well as the express LRS transmitter? An What’s the right deal that saves me money from buying modulars an accessories so I can use different drones and receivers that are all built into the ELRS transmitter!
@NickBurnsFPV 2 жыл бұрын
I suggest getting the internal elrs version with an external 4 in 1 module. This would allow us to use the external 4 in 1 to bind to our D16 and D8 quads and elrs to those that have elrs receivers
@jacobosannicolas3884 6 ай бұрын
Hi Nick thank you for the video.! , how do you find this one vs the zorro. I'm worried about battery time on the field.
@NickBurnsFPV 6 ай бұрын
The zorro battery life is pretty short compared to most other radios. I really can't say how much different as I didn't use the radio for week over week, and it was a fair bit ago.
@jerrybullington7752 2 жыл бұрын
Hey Nick. Sorry for all the questions But sadly I an alone in this hobby in my area. Anyways. I am not very good at soldering so I wanted to use plugs for my motors. could you tell me what type of crimps you use or if you are aware of a link that would help? Thank you for all the help you have given so far. Much appreciated :)
@NickBurnsFPV 2 жыл бұрын
That is a good question. I am not sure as I have not crimped motor connectors. I would think we could crimp on the pins with something like the PA-09 crimpers, I haven't use it since we moved away from the red jst connectors for batteries, but it has several different size of crimping options on that tool.
@crash_lander 2 жыл бұрын
The flight recording is amazing, what camera you have on this drone
@NickBurnsFPV 2 жыл бұрын
Its a super small and light runcam nano 3
@user-tp9mj1xw9c Жыл бұрын
Should i get a jumper t pro 1w els or a radiomaster tx12 elrs, the tx12 is better in every way except the power output(250mw vs the 1w of the t pro) but at the same time i'm just going to fly around my house, only thing i worry about is fail safe gong around my house because i live in europe and walls are very thick and with my last 100mw radio it failsafed before getting completely to the other side of the house. Which one should i get? Is 250mw 2.4ghz elrs enough for my needs?
@NickBurnsFPV Жыл бұрын
1 watt is really on needed for the most extreme environments at the furthest range …range like many kilometers
@dannybritt9483 2 жыл бұрын
Did the sma antenna adapter only come with the review kit? My T Pro ELRS edition did not come with that adapter.
@milosong-weiss5770 2 жыл бұрын
Same. Just got mine in from Rdq today. I bought a pigtail and a moxon and will do something similar myself
@NickBurnsFPV 2 жыл бұрын
Odd, it was in two of the radios I got. They must have put that in then if your not getting them retail. Sorry for the mistake, I didn't expect them to send two radios with the same extras.
@BamRamirezFPV 2 жыл бұрын
@@NickBurnsFPV Nick, any chance you'd be willing to part with the extra adapter? I've seen people 3d printing parts for the antenna mods but unfortunately I don't have a 3rd printer.
@MCsCreations 2 жыл бұрын
Awesome review, Nick! Thanks a lot! 😃 What really kills me about this radio are the 2 momentary switches, instead of one momentary and one 2-way switch. 😕 Anyway, stay safe there with your family! 🖖😊
@ooOoo..... 2 жыл бұрын
I prefer it that way. A momentary switch is easy to program so it operates as a 2 position.
@vhsu0521 2 жыл бұрын
Still prefer the style of t pro over zorro depite the issue. Hope they fix the issue and have updated radio on shelf asap Would rather go for x7 or tx16 if I want big screen and don't mind the stick out switch than go with Zorro.
@aylenstudios Жыл бұрын
is it possible to change the t pro to be stick mode 3? If it is possible, how hard is it
@MrAlucardDante 2 жыл бұрын
The lack a of a 2 position switch is a big let down IMO. Also, 1W without a fan, the module will either be throttled down after some time so it doesn't get damaged, or you will have warm hands in the winter lol
@dndon2007 2 жыл бұрын
I use frsky x-lite tx but after I use jumper t-pro I feel its very difficult to control my quads now.. do you feel any different in flying stick response?
@NickBurnsFPV 2 жыл бұрын
Yes if we run edge tx we get faster gimbal polling and elrs is faster to process the signal. These will make the quad respond faster
@bahadurbille7274 Жыл бұрын
Hello I need help with charging of the transmitter. On its top there is a USB C port where I am suppose to plug a USB C cable and the charging should be on by default. But what's happening - As soon as I connect the charger, The transmitter Power button light and LCD light comes on and goes out within a second. That's it. No indication or display for charging. - I have to keep the transmitter ON and then keep it connected to the USB C charging cable "imagining" that it gets charge only when is ON. But still no charging indication is there. Since the Tx is ON it starts beeping after few minutes. Have to keep stick moving frequently. What is the standard protocol for charging Jumper T pro?
@NickBurnsFPV Жыл бұрын
The radio should be off to charge. The green power button is on while charging, the light goes off when the charging is complete. Does the radio have batteries inserted?
@VampirusX Жыл бұрын
They upgraded the pro with a on/off switch which replaced the rotary on the right. That was a huge complain because in the previous one a arm/disarm was not possible. I am not sure, if I want the lite or pro. I have no problem to have a spare 18650 with me. I read, that the pro has some issues the lite does not have. I also read, that the internal ELRS was capped. Does anyone have evidence for that? I only buy this version because of the added range. But if I only get the max range with the external device, I will get the 4-1 instead.
@HendrixFreakazoid 2 жыл бұрын
I pretty much fly cheap modded old school angle or horizon mode brushed motor whoops in the house and thumbing works the best for me although if I ever learned acro then I think pinching would be better. The only real problem with thumbing for me occasionally is slippage and I can't believe somebody hasn't invented some kind of a harness to keep your thumbs on stick ends but still be able to pivot or maybe some good old duct tape would get the job done
@smokehead5318 2 жыл бұрын
What exactly woop is that? And what protocol?
@InfinityLoops 2 жыл бұрын
A careful game of Operation to get that SD card out 😄. PS: if Jumper stops making T-lite, I will riot.
@NickBurnsFPV 2 жыл бұрын
lol. If you like the t-lite and the zorro battery life isn't a deal breaker that would be the one to move to. But you always have your riot to keep the t-lite on the market.
@InfinityLoops 2 жыл бұрын
@@NickBurnsFPV Well, if the rioting fails...i'll check out the Zorro 😂Thanks Nick!
@chad61610 2 жыл бұрын
I didnt get an antena adapter with the internal version. Hmm.
@erikvf7 2 жыл бұрын
Hello, thanks for the review. Is it possible to adjust spring tension on T-Pro?
@milosong-weiss5770 2 жыл бұрын
Yep. Just did it myself. You have to open it up and adjust some screws on the gimbals. It’s like any other radio, so I’m sure if you search for a tutorial you’ll be able to figure it out
@erikvf7 2 жыл бұрын
@@milosong-weiss5770 Thanks bro!
@diggsit69 2 жыл бұрын
Nick, got a question when I’m Using my BetaFPV transmitter with my Emax hawk pro and go a fair distance away what are those four little ⭐️ symbols that pop up on your goggles, is that some kind of failsafe warning? if not what does it mean?
@NickBurnsFPV 2 жыл бұрын
I presume that is likely the battery warning? Low voltage? That can also be the beeper indicator. Check your modes tab and the switches to see if you have the beeper active when you see those stars on screen.
@diggsit69 2 жыл бұрын
@@NickBurnsFPV Nick, it’s not my battery I have my battery warnings an other settings set, and it’s not when the battery is low because the battery was full. it seems when I’m going a certain distance I get like four ⭐️⭐️⭐️⭐️ type symbols and they pop up in the middle of the goggles and it seems like it’s a distance or interference thing because of my BetaFPV transmitter/receiver, or maybe getting out of range type of warning and that’s why I thought it was a weak signal-fail safe type warning? it’s not my battery warnings or anything related to that I’m not sure what it is and it only happens when I go a certain distance, an my VTX is set to 25 Mw also if that has anything to do with the warning am getting on my EV800D goggles? But that would only affect the Video Range distance using the VTX power settings, Right?
@NickBurnsFPV 2 жыл бұрын
@@diggsit69 It could be a range issue and the warning indicating a low rssi, do you have the rssi element on in the osd? And this only happens at a distance but you don't actually failsafe? Is your betafpv radio the version with expresslrs or are you using frsky protocol?
@diggsit69 2 жыл бұрын
@@NickBurnsFPV Nick, yes I do have the RSSI set on the OSD for all my Emax type drones in Beta Flight, an yes am using the Frsky protocol on the BetaFPV 2 transmitter that it came with an the Emax - Hawk Pro an TinyHawk 2 freestyle drones as well. So if that’s just the RSSI warning me that I am near the antennas full distant Range, if so what would be the easiest way to increase this, A better transmitter that has a antenna but not one built in like the betaFPV comes with? Or changing out the Dipole antenna on the Hawk Pro with a better antenna like crossfire, or something else if I didn’t wanna go the crossfire route, or is this where Zorro express LRS is the Best option?
@NickBurnsFPV 2 жыл бұрын
@@diggsit69 Antenna won't do all that much. In range tests we have seen over 1km of range on frsky d16 protocol, but that is high up in the air with clear line of sight. The range will vary greatly. If your using d8 receivers and protocol the range will be far shorter, in either case there isn't much to do with it to increase it, but it is worth noting location and rf interference also plays a role in range. A change in protocol to crossfire or elrs is likely the next choice to increase control link range.
@jerrybullington7752 2 жыл бұрын
Hey Nick. I’m sorry to be suck a pain in the butt. But I can’t seem to find the answer on my own. I have 3 beta fpv 65 hD fc. Each time I hook up one up all the motors spin in same direction. This has happened to all three. I use a jumper tlite but I doubt the radio has anything ti do with it. If you could help I would be very grateful. Again! ☺️
@Rood6 2 жыл бұрын
As someone who was dumb enough to buy a DJI FPV I can say that they pretty much molded that remote and added some buttons. It's too similar to be inspired by it.
@gursoyakar 2 жыл бұрын
express lrs aion rx mini receiver turns solid green as soon as I insert the battery. It doesn't go into bind mode. why could it be ?
@NickBurnsFPV 2 жыл бұрын
I suspect we had a flash not finish or flashed the wrong target. Sounds like the rx is stuck in boot loader mode. This is the expresslrs page on that rx. www.expresslrs.org/2.0/quick-start/receivers/rx-jumper-aion/
@donerkanat1328 2 жыл бұрын
hi ı bought internel ELRS version of this tx . I have some issues cant find solution . Can you help me please. when ı set it up to hight tx power (250 mw or 500 mw ) . Speaker have some parazite sound . and pitch and roll values on betaflight shaking badly . when ı reduce the tx power it is getting well .
@NickBurnsFPV 2 жыл бұрын
I haven't heard of that issue before. I would suggest reaching out to jumper support. I don't know what the fix for these symptoms would be.
@donerkanat1328 2 жыл бұрын
@@NickBurnsFPV Thanks Nick . If ı find a solution ı will share it .
@user-qx7yu8lp2s 3 ай бұрын
sir I have a few question for that elrs issue. First, I wonder if I fix it once, whether it will ever happen again, and second, does that issue only happen when I try an update
@NickBurnsFPV 3 ай бұрын
sorry I don't understand. I don't see a mention of an issue being fixed.
@user-qx7yu8lp2s 3 ай бұрын
@@NickBurnsFPV oh I meant hitting that boot button
@NickBurnsFPV 3 ай бұрын
@@user-qx7yu8lp2s oh sorry I didn't put together the different comments. We can avoid using the button and update over wifi which can be activated in the lua script.
@carlosrito 2 жыл бұрын
Hey ,I'm pincher ,zorro or t-pro fits better for this style? Thanks
@NickBurnsFPV 2 жыл бұрын
for me the zorro due to the t-pro not having switches.
@jonathanweesner3045 2 жыл бұрын
Try removing SD Card with antenna raised
@overlookedundead8711 2 жыл бұрын
I am amazed by how clear this DVR is, wow! Is this Digital? How do you get it so nice?
@NickBurnsFPV 2 жыл бұрын
Lol, no its analog. I fly raceband 8, and my location at the table is important. My location is centered and in an open space. If I move even to the couch the reception isn't as good.
@overlookedundead8711 2 жыл бұрын
@@NickBurnsFPV is there something special about Raceband or Raceband 8 in particular? Sadly you can´t legally transmit anything over 5.880 in Germany lol.
@NickBurnsFPV 2 жыл бұрын
@@overlookedundead8711 raceband is up above wifi frequency. the other alternative is the turn off wifi while flying and see if that helps. Certainly don't be close to the wifi router. :)
@overlookedundead8711 2 жыл бұрын
@@NickBurnsFPV ah thanks! good to know that theres no really special sauce going into it lol, would have been kinda sad if one more cool thing about this hobby got banned here lol
@ianmontefpv 2 жыл бұрын
5:40 👍
@josephj.pasternack2988 2 жыл бұрын
What Rates do you use to fly ACRO so well in the house?
@NickBurnsFPV 2 жыл бұрын
I use pretty high rates. Pitch and roll are 1.2 and super on pitch and roll is .75. yaw is 1.30 and .8. These are betaflight rates btw
@pirateradioFPV 2 жыл бұрын
You still need the iflight version 😂 I just orderd the elrs module for my tx16s, to me all three of these are just disappointing 🤷♂️
@NickBurnsFPV 2 жыл бұрын
I have it. but waiting on elrs team testing.
@djs134 11 ай бұрын
I hope jumper is sending your their new t20s , I’d love to see what u think of it
@NickBurnsFPV 11 ай бұрын
I do have it. Video should be up this week sometime.
@djs134 11 ай бұрын
@@NickBurnsFPV awesome, can’t wait to see what u think. So, as a hybrid pincher I struggle with disarm switches being in the front of the radio like the mambo and the boxer. I much prefer them on top like the qx7, t-lite, and tango 2. So I’m hoping that top left switch feels like it’s in the right spot for a quick disarm. Unfortunately that rdc90 gimbal uses a potentiometer so it’s not as good as the hall gimbals. I just really hope they are still gonna sell the hall version since I plan to order one
@jpslaym0936 2 жыл бұрын
The best pilots are pinchers of some type. More muscle groups = more speed and precision with coordination of muscle groups in the hands
@Airbrushkid 2 жыл бұрын
So why can you not just get the Jumper T Pro 4 in 1 and add a ELRS module!
@NickBurnsFPV 2 жыл бұрын
you certainly can. The original they sent me was exactly that pairing.
@growtech3706 2 жыл бұрын
can u make more video about it
@bbsheppo 2 жыл бұрын
What camera is this, looks good quality?
@NickBurnsFPV 2 жыл бұрын
that is the runcam nano 3. Outside its not has good, doesn't handle direct sunlight as good and if the quad isn't stable or the camera isn't well mounted it tends to show jello more
@bbsheppo 2 жыл бұрын
@@NickBurnsFPV it must be the dvr you use as it looks so good on youtube!
@NickBurnsFPV 2 жыл бұрын
@@bbsheppo It could be that, but also youtube doesn't encode all video equally, some channels with less views get a lesser encoding quality, and I also don't do fullscreen on the dvr, as that makes the video appear so much worse than it is.
@engizmo 2 жыл бұрын
Thumbers are all thumbs, nuf said. Hybrid pinchers are the best 😜
@gingerdude94 2 жыл бұрын
You'd buy the zorro if you want built in elrs gamepad radio. Make a better V2 jumper.
@athefpv4670 2 жыл бұрын
Goes both ways, huh? Not the antenna. That stuff is 50% empty so half of it is just purely for aesthetic. This and the momentary switches and the "6 position switch" are so dumb. The zorro is better even though it has weird choices too. The bfs (big effing screen) and the tiny batteries are probably the result of them balancing a poorly placed lanyard...
@John_Doe_6996 6 ай бұрын
Will either or both of these work with a 900mhz antenna module?
@NickBurnsFPV 6 ай бұрын
Not sure if I understand. The transmitter as well as the receiver both have to be on 900mhz as well as the antenna to be 900mhz to work effectively.
@John_Doe_6996 6 ай бұрын
@@NickBurnsFPV yeah, I understand that the receiver and module transmission need to match, but what I’m wondering is if I can use a 900mhz radio module such as the R9M lite pro, with the jumper, to make the 2.4ghz radio output 900mhz to the receiver. I hope that made sense lol.
@NickBurnsFPV 6 ай бұрын
@@John_Doe_6996 No, I am not aware of any tranmitter in fpv that does both 2.4ghz and 900mhz, its either or.
@John_Doe_6996 6 ай бұрын
@@NickBurnsFPV the Taranis x lite pro is a 2.4ghz radio, and it works with my 900mhz module and 900mhz rx combo… was hoping the same module (r9m lite pro) (I hate these naming conventions) could be installed on a Jumper, and get the same functionality. The ergonomics of the xlite pro are not great imo… just wanna swap radios but keep all the other equipment. But so far haven’t found a definitive answer on if this will work. Maybe something to try in a video? I haven’t seen anyone else talking about it. But I’m sure there are lots of 900mhz users who would like to know the answer before buying blindly, or avoiding certain equipment. Thank you for all you do and your input.
@NickBurnsFPV 6 ай бұрын
@@John_Doe_6996 yes in the case of using an external module that is 900mhz it will bind with the same protocol 900mhz receiver. I thought the question was binding a 2.4ghz module to a 900mhz receiver and the opposite.
@johndextersantos9541 2 жыл бұрын
T-lite V2 is now selling 😁
@NickBurnsFPV 2 жыл бұрын
I will be looking at that one sometime soon.
@smokehead5318 2 жыл бұрын
Which one is better v2 or t pro?
@Neukom720 2 жыл бұрын
Nick get urself a quality set of 18650's, if my eyes don't deceive me those are like ultra fire batteries or something and there labels and construction are complete lies and cannot do any kind of amp draw and I doubt the mah they can do is much more than 1000mah which is terrible, just a heads up, longgggg time watcher and your videos are great!
@NickBurnsFPV 2 жыл бұрын
yea, I am aware. I had them when radios started using 18650, figured I might as well use them until they die, then replace. I bought others (Panasonic and Sony) to use for 18650 quads.
@Neukom720 2 жыл бұрын
@@NickBurnsFPV sounds good, thanks for all your hard work, I have always been more a micro guy myself started with brushed 8mm motors with parrot props, crazy how far it's come! Currently love my 35mm prop'd whoops using 1102 19,000kv motors, Happy model elrs AIO, just fly's so good!
@deepbreaths5340 Жыл бұрын
house is a 10/10 for whoopin
@NickBurnsFPV Жыл бұрын
Lol it is. Real estate is cheap here in rural US
@DadDoingThings 2 жыл бұрын
If you tilt the antenna up slightly the sd card slides right out.
@NickBurnsFPV 2 жыл бұрын
really? Maybe tilt it up to create more space then back down to get it all the way out?
@DadDoingThings 2 жыл бұрын
@@NickBurnsFPV Yep, it's how I get the SD Card out of mine.
@richardmcguigan1382 2 жыл бұрын
upside down with your thumb lol
@carlhall2563 2 жыл бұрын
First
@oddeman3489 2 жыл бұрын
the winner to day is ,,,,,, first 😊
@406fpv9 2 жыл бұрын
I've been very interested in getting into elrs. If you're planning on giving any of those controllers away. Just saying lol
@michaelford4411 2 жыл бұрын
Not that there's anything wrong with that...
@wingsounds13 2 жыл бұрын
1W ELRS is useless for 99.9999% of users. Who needs 50 mile range? 100mW will give you at least 10x the range that normal freestyle/proximity/racers need. Operating at high power basically just drains your batteries faster. Also, operating at high power can screw up other pilots flying in your vicinity.
@NickBurnsFPV 2 жыл бұрын
yes, all true. I think to many want the number comfort that they never use or need.
@pointnozzleaway 2 жыл бұрын
Bardwell has a clue. you ....not so much
Joshua Bardwell
Рет қаралды 114 М.
BalcevMMA_BOXING
Рет қаралды 12 МЛН
TweetFPV
Рет қаралды 6 М.
TweetFPV
Рет қаралды 9 М.