Jun Air 6-25 damaged in delivery. First run upon Inspection.

Рет қаралды 11,097

6 жыл бұрын

Excited to finally get my first JunAir. But disappointed it was damaged in transit. I was told the oil was removed yet not placed securely.. the genuises placed it inside the drainage bottle, which was broken when i received the compressor. Here the first start after i refilled with new oil. The air is coming out alot from the drainage line, and not going into the tank. As a resultx the tank is not filling and gauges arent moving.. the compressor didnt shut off. I brought it to a repair shop to diagnos the problems. Cross you fingers they don't bend me over and seevice me from behind! Lol.

Пікірлер: 17

@LEGIN27 5 жыл бұрын

How did things turn out? I have the same compressor for over 23yrs purchased new, runs great. I do my own maintenance...parts repairs, oil changes. How can I help? What is the compressor used for? Reading what you wrote above it sounds like the drain cock on the air tank front top below the compressor motor may have been left open. These compressors are extremely relaible when properly maintained. very low maintenance. I actually have two of this brand silent oiled compressors. Let me know.

@AMStudios22 3 жыл бұрын

The compressor is a workhorse! I use it almost everyday. Easy maintenance.. Take Care of Your Tools and They will Take Care of You!

@dianaspy6733 3 жыл бұрын

Need help with a double motor jun air. At work with a dental lab. Smells up the whole room, even comes out the hand piece. Makes me feel ill. Mgr. Not mechanical, told me it was my responsibility? Lol am a 61 year old woman. Will changing the air filter help? When I use the air hose it doesn’t seem to have much pressure. Any thoughts would be helpful!

@AMStudios22 3 жыл бұрын

@@dianaspy6733 I would say you really need a qualified technician to look at it. I found a local "Air-Compressor" repair shop. They cleaned up my machine and tested the compression and found no damage. I would suggest you capture video of the compressor while it is running, so someone may be able to diagnose the problem if you cannot take it to a repair-shop. Be certain you are draining the compressor for moisture that builds up in the tank. Look-up the term "pet-cock" tank valve. If no one maintains this compressor normally, that would be the first place I would start to diagnose the problem. good luck

@dianaspy6733 3 жыл бұрын

@@AMStudios22 it is a Jun - Air compressor silent 6.2 A. Used to run hand piece like a dentist. Is a dental lab application air nozzle or gun for cleaning. Think it was tipped over last time it was transported for service. Talked to a tech. From the certified service center. It voided the warranty. Just a sad mess. Going to get an extra filter and filter replacement in the regulator. Was told oil smell is part of type. They should get a dry compressor. Out of my hands.

@nikosmoraitis6145 3 жыл бұрын

i have one jun- air .. and now it is loseing oil from the glass eye ... not from the metal, but from the glass bubble.. what can i do ..? i want to keep the bubble..

@rosaramer2826 3 жыл бұрын

I don't remember where the drain valve is

@AMStudios22 3 жыл бұрын

Honestly, not sure if there is one on the bottom, but I use the PetCock valve at the top.. the one with hose connected.. All the moisture flows into a plastic bottle i adhered to the compressor with zip ties. hope that helps.

@wongbagoes2014 5 жыл бұрын

How size capasitor to compressor models like that.(DK-9400)

@AMStudios22 3 жыл бұрын

Not sure what you are asking but thanks for commenting!

@varaprasadpaluri Жыл бұрын

We have jun air model 625 , we need 5 bar pressure , it will run up to 7 bar tank pressure and It will trip. again' it should start when tank pressure touches 5 bar pressure. but now problem is it is not restarting when pressure decreases ,what could be the problem?