30-70#, IBO 320 fps, draw length 19-31" We test the Junxing Max 7 compound bow and see how it stacks up as a budget compound bow. www.archeryshop.com.au/p/9500... www.archeryshop.com.au/p/9500...
Пікірлер: 166
@randy35772 жыл бұрын
I've been shooting Archery and bow hunting for 30 years and I'm still on a budget, I'll never pay top end prices for a bow. I've never met a deer that cared whether it was shot with a $300 bow or a $1400 bow lol.
@jasonrichardwatts2 жыл бұрын
Touche Randy, especially the Lake George deer.
@thistledewoutdoors33312 жыл бұрын
Indians used a stick & sinew....
@tristantotev28872 жыл бұрын
Best reply yet
@pedrocruz26492 жыл бұрын
😅👍
@milosalsa2 жыл бұрын
@@pedrocruz2649 has comprado este arco o me podrias decir si es adecuado para cazar ciervos y cerdos salvajes?
@jimbob5b2003 жыл бұрын
My Junxing bow is brilliant, that new one looks awesome !
@ee2222 жыл бұрын
great video. loved the inset which allowed me to see your follow-through and how the arrows landed at the same time.
@tristantotev28872 жыл бұрын
I bought this bow as my first bow and I love it the only problem I had so far is the paint bubbling I have shot it quite alot in the month I've had and I love it and I think I shoot just as good as other people who have started learning on very expensive rigs its tempting to buy another setup for 280 buks just to have as it as a spare its brilliant I was inspired to buy it by this video cheers m8 I wish I found my love for archery sooner
@ABCD-rn6tk3 жыл бұрын
Budget bow is becoming more and more amazing
@marlonrodriguez8987 Жыл бұрын
Looks interesting I would like to see more videos about this bow I think it have a lot of potential
@chrisgaskell37063 жыл бұрын
I bought this bow a couple of months ago its the M129, I love it, it is everything that he says it is. I also bought the M108 Pheonix 40 inch, again I love it.
@tristantotev28872 жыл бұрын
Brilliant i am without work from covid and need something to keep me sane and this seems like an affordable entry level bow would you reccomwnd it for a first bow? I am sure when I visit the archery shop they will have it in for me for not supporting them is my only concern I went to the local archery store and he talked down the Chinese bows and the cheapest entry level was over 1000 without a hard case
@chrisgaskell37062 жыл бұрын
@@tristantotev2887 Archery Supplies is I believe one of if not the biggest Archery shop and supplier in Australia. Steve is also a competitor and champion archer. With his 40 plus years in the game if he tells you that this bow can compete with (with the correct form) a 1000 dollar bow then take it as gospel! I would buy this as a first bow, no problem.
@tristantotev28872 жыл бұрын
@@chrisgaskell3706 cheers yeh the way I see it is for 450 even if I dont use the bow for long I get a hard case for the next bow its a win win
@kriskath70402 жыл бұрын
What a great businessman... cheers
@judefuselier3 жыл бұрын
I have a junxing and it's good for what it is. Set your expectations according to the price, 300 bucks, get this or a bear or a pse. If it's a concern spend twice the money for 3 times the quality...
@stephengatley8144 Жыл бұрын
I bought this bow about a month ago hit my first real robin hood this week. Fook meh never done that at 18 meters before... Great bow for a beginner 😀
@TheUltimateNyrat2 жыл бұрын
Thank you for this video doing the maths my Drawlength is 32.5 (203 CM tall with finger to finger at 205cm 80 Inch for Americans) so I was going to sub 1.5" draw Length for a cheap bow. I wont do that now since it may only go to 30" (Not doing Tournaments or anything just shooting around at my mates house) but I want a good feel when shooting
@saxon39802 жыл бұрын
I agree its amazing for $200, and looks perfect for the beginner archer. People complaining and compairing it to a bow 10X the price need a reality check. The fact that most of the things you'd like to see with this bow, is the same thing you say about big name American bows. Even the cams being out of time, you did a video on a $1500 bow that was also way out of time. Having said that I personally wouldn't buy one, but certainly recognise the value and appeal.
@krisvandermeulen2538 ай бұрын
I'm only 6 months into recurve and I started using my oldest son's recurve bow (he stopped due to university and a girlfriend). I enjoy simply shooting and practising in the club. I tried a compound in the club but the high cost associated and certainly for any add-ons like sight and arrow rests do put me off. I decided compound was not for me. But below 300$ I could consider a compound in a couple of years when I've outgrown the recurve - if ever.
@Au_Hussar2 жыл бұрын
I'm undecided between this and the Topoint T1, looking at both of your ready to shoot packages, is the extra money worth it?
@yewtreeknives58342 жыл бұрын
Hi Steven, thx for the review! Wich compounds would you recommend for a beginner with a 31.5" drawlenght in the budget to 600 US dollar range? I am a traditional archer with recurve and hybride longbows and want to try a compound. I would like a hunting type package compound to learn to shoot this style. Kind regards and thx. ps I subbed.
@bearfootbowhunter30542 жыл бұрын
Mate will you guys be getting in the 109e that can shoot ball-bearings and arrows?
@mitchimal3 жыл бұрын
I bought the M128 and had it on 31" draw. I then bought a Mathews at 31" and yes the Jinxing feels shorter but I wouldn't say more than half inch.. the issue with the M128 was the cam lean that couldn't be tuned. This bow with yokes looks like the revised version. BIGGEST issue with these bows are the strings.. they last about 4 months max and fray like crazy and the serving seperates. The solution? New strings cost me $30 from Junxing haha they're still crap but for the money these bows are fantastic... Matthews copy obviously and they've done well. Best bow to start your compound life.. very happy with them. Also wound tight I think they certainly do get to 70lb!
@eeee32792 жыл бұрын
Hello. I ordered the M128 and heard about that string issue from Russian YTs. Are the strings readyly available on their site (because Ali is empty)? Because i am getting worried about availability in future. Thanks in advance.
@mitchimal2 жыл бұрын
@@eeee3279 I contacted them directly off their website. They are easily available and cheap. If you can't get access to a bow press easily, you can just use a mobile bow press, there is a Junxing version which fits the limbs and is very cheap on eBay.
@eeee32792 жыл бұрын
@@mitchimal Thanks for the tip, mate. I'll go and check it out. Maybe will use as a template, for more durable solutions. Although we don't have any archery shops or proffessional masters over here, as far as i understand. Greetings from Estonia.
@tristantotev28872 жыл бұрын
I've read on reviews the cams buckle if you put it at full pound draw
@mitchimal2 жыл бұрын
@@tristantotev2887 mine was maxed out the whole time, never had that issue
@greenhoodedvigilante4583 жыл бұрын
Do a review on Junxing f161 recurve.
@scut20002 жыл бұрын
Hi Steven, would you rate this bow at 300fps? Interested in purchasing one for hunting.
@gyadol2 жыл бұрын
Can we buy this Junxing Max 7 for target shooting purpose? How safe is it for target shooting?
@DrewNewmanAce Жыл бұрын
Do you guys get EK Archery equipment in AUS? They’re budget, I wondered if you’d tried them?
@NoobArchers4 ай бұрын
I do target archery as a hobby in Turkey. I bought the 'Junxing Max7' Compound Bow in the past months. It is really stable and has beautiful shots. I added a short shorts video to my KZfaq Channel, those who want to examine it can look for shots.
@tristantotev28872 жыл бұрын
Hi mate I see your bow is not wound down all the way for the speed test will this not effect that? Also can I buy replacement bowstring for max 7 from you?
@kevindonahue73552 жыл бұрын
Those budge bows are amazing have you tried the dragon x8 yet
@jeremyblackwater4392 жыл бұрын
You have that one? I have the creative xp Glass Harrier and I think they’re the same bow. Very nice for the money
@wcwcgarner27173 жыл бұрын
I am looking for a used shootdown. Any help would be appreciated. In good shape.
@blaspopopo2 жыл бұрын
is there a review of topoint trigon?
@braxtonnelson797610 ай бұрын
Any idea how to get one of these in the US or if it goes under a different name for the US market?
@randy35772 жыл бұрын
Will be a bit faster if you crank the limbs down tight. But still I'm thinking it would only hit the 270s
@scottc952 жыл бұрын
im new to archery .im looking at this complete package on amazon vs the sanlida x8 dragon package. the dragon is $260 and the junxing 129 is $300. what would be better? also what do you think of the toppoint t1?
@user-tz8kt8lw1d7 ай бұрын
Тоже выбераю междк dragon x8 и junking m129. Если выбрали что то из этого, поделитесь мнением
@chafikmoalem3582 жыл бұрын
... only that the "machined every thing" Topoint trigon is a full kit! (even disregarding the wimpy arrows)
@ruggedaustralia71362 жыл бұрын
Greater review where can I pick up a bow like this for 200 I can't find them at that price
@user-tz8kt8lw1d7 ай бұрын
Да нет его по такой цене. 300$ он стоит минимум без оьвеса
@joelow60862 жыл бұрын
For a $200 bow, which is a better buy? Junxing Max7 or Sanlida Dragon X8. I will appreciate your answer. Thank you.
@megasmoothone2 жыл бұрын
We bought two Dragon X8 and they have been fantastic. They cost less than this one
@izzatroslan80593 жыл бұрын
can u review for junxing M109e
@jamescaldwell2616 Жыл бұрын
$200 is what Mathews ought to be charging for the crap they are putting out these days
@user-ct4im4nd6r9 ай бұрын
I bought a Bear compound once and was extremely disappointed at 20 yards it was ok 30 yards was very inconsistent and the space between 30 and 40 yard pins was more spread out and couldn’t get a 50 yard pin to set 40 yards was very inconsistent
@humanitech2 жыл бұрын
Would you say this bow is equal or better than the junxing M128?
@user-bp1st8ez6d2 жыл бұрын
Its all the same thing just the cams diffrent and the cable slide
@humanitech2 жыл бұрын
@@user-bp1st8ez6d Thanks...I thought they looked very similar
@davidsalman83622 жыл бұрын
Hello Steven and Good day to you, Do you have a Left-handed RPM Nitro MAG XL? Maybe there's 1 Available but isn't listed on your website perhaps? i've Messaged many websites including RPM on instagram too, No one answered and it's been days, Hopefully this Reaches you, cause i'm determined to buy one, and thanks in advance!
@jasonrichardwatts2 жыл бұрын
That’s an absolute RIPPER of a bow for the price. Remember the old Bowtech Tomkats you used to sell at around $900 for the package? That bow is less than one third of the price but I bet it’s pretty comparable performance wise.
@moikyaАй бұрын
I recently purchased a Junxing M129 compound bow thinking I would receive the product completely assembled and ready to use but they sent a disassemble product that I had to get it assembled for use. I had to do it myself to save some money from the archery shop and just looked for some videos of Junxing product but did not get much information. I was able to assemble it but not sure if I did it the right way. NOT SURE if the twist of the cables and string was correct, as I think it should be twisted in a certain way. CAN YOU PLEASE ADVICE and HELP? Thanks so much.
@moskito58642 жыл бұрын
bought a JUNXING 38 pound Recurve Bow, unfortunately my wife cant use it because its too hard for her to pull to get a clean shot. What can i do? Do i have to change the Bow Arms or can i do something with another bowstring?
@patentleatherkicks2 жыл бұрын
With a recurve bow, you can untwist the string to reduce the draw weight slightly, but this will also affect your brace height so you don't want to change it too much. If you need to adjust it by more than a pound or two, you'll need to get different limbs. I hope that helps.
@moskito58642 жыл бұрын
@@patentleatherkicks thanks, cant untwist my string, its not twisted, its more like lots of little string becoming one once they on the limbs. I will buy another one for my wife, guess thats the only solution which works :) thank you
@thorstenfleck-baustian87753 жыл бұрын
How do you look at the Chinese products veeeery closely resembling OEM’s like Mathews, any challenge promoting them?
@mitchimal3 жыл бұрын
He doesn't sell Mathews anymore 🤣
@jasoncadell22762 жыл бұрын
Welcome to the future....big things happening atm.
@wongbu70432 жыл бұрын
Why dont you wind it up to the max. Ill twist the string to get the rated speed. Can you do a video like that?
@chrisbevan1121 Жыл бұрын
Where is your store located bud?
@carabinasdosul9881 Жыл бұрын
Show pena que no nosso Brasil não conseguimos por este valor meu sonho é ter um arco destes para começar no esporte mas infelizmente aqui não tem como imagina ter um pse só fica no sonho mesmo😢
@Voxguitarsrock2 жыл бұрын
Would this be good for whitetail deer hunting?
@roverjohn3 ай бұрын
Sure, why wouldn't it be. 240-260 fps will shoot through a whitetail with no problems whatsoever.
@mihalyvarga42872 жыл бұрын
Where can I buy it?
@WM-jy9dz3 жыл бұрын
...the secret of the cheap price is: junxing saved much $$$ by not putting tags on the bows - we all know Steven never would have taking it off 😁
@Life-of-Bluegrass_Music2 жыл бұрын
Tags lol cheap parts, cheap manufacting slave labor. Chinese products are junk.
@WM-jy9dz2 жыл бұрын
@@Life-of-Bluegrass_Music I shoot a Mathews Traverse, 12 month old, 10 month of use, 2 month waiting for spares: first limbs replaced as the coating started cracking, then the bearing collapsed, then - with just 10 month of use!!! the bow string (genuine Zebra string) broke at the D-loop ...(no, bow was never dryfired), my first bow was a Chinese Topoint, no issue at all with this bow (this one I dryfired when I got it - typical beginner error, broke some strands of the bow string, string was replaced) and it is still going strong ....so much about quality of made in US ... Eta: forgot to mention: the Traverse costed more than 3 times more compared to the Topoint ....
@tristantotev28875 ай бұрын
I got the max7 and the cam bearimgs are stuffed and my bowstring needs replacing any one know where i cam get these things?
@MyFriendsAreElectric3 жыл бұрын
Nice :) At that price, nobody should really need the benefits explaining to them too much... It's just such a cheap way into the sport that it makes it incredibly accessible. Might even tempt some trad or recurve folks to pick one up as a curiosity. Hell, it's surely a go-to for anywhere looking to have a few loan bows ready like a club or archery gym. Minimal effort to tweak and away they go. Even if dry fired and wrecked, it's hardly big expense. Perfect to learn on.
@letsgobrandon83753 жыл бұрын
300 bucks is still a lot of cash for a so called budget compound bow. I picked up a new pse stinger R.T.S. for 350 on sale. The pse is a better choice then this thing.
@MyFriendsAreElectric2 жыл бұрын
@@letsgobrandon8375 have you shot one to make such a comparison statement? Now compare the prices without a sale on.
@letsgobrandon83752 жыл бұрын
@@MyFriendsAreElectric the support in the united states is worth the difference in price alot of shops will not even work on those Chinese bows.
@maverick78732 жыл бұрын
these cams is like the hoyt ignite
@DHertz-yt8zc9 ай бұрын
Скажите пожалуйста он на подшипниках?
@justinlloyd93423 жыл бұрын
That thing looks a lot like a Mathews vertix
@capricornmagic633 жыл бұрын
Merlin/Mybo bows are the best. I'll never use another brand, and who charges 500 dollars per hour and for what?
@sahhull3 жыл бұрын
I like my Mybo Origin too ... Wouldnt mind their new one but I cant justify the purchase
@capricornmagic633 жыл бұрын
@@sahhull Try the Edge, I'm not sure any of these bows are really really worth the money but someone once told me that if one is willing to pay the asking price then it's worth it. I think it comes down to the eye of the beholder and what they find beautiful. I don't think there's a huge difference in performance, it's the archers skill and experience that determines success or lack of, to hell with what the Pro's say, they're just trying to sell a product to make money.
@charlesparker23692 жыл бұрын
Do you ship to US
@gibsonlife5733 жыл бұрын
That's a deal in a half
@matthew57913 жыл бұрын
Is a bow you list for $280 bare on your web site really a $200 bow? Seems reasonable to expect you to get the price right.
@user-tw9io9nz2m3 жыл бұрын
He’s often confused about pricing in his videos, we just have to live with that I guess
@chrisgaskell37063 жыл бұрын
I purchased this bow for 160 euros plus delivery.
@tristantotev28872 жыл бұрын
263 pretty close m8
@Baludinhobr Жыл бұрын
M128 ir m129?
@user-tz8kt8lw1d7 ай бұрын
Тоже мучает этот вопрос. Очень мало информации
@Gmara8882 ай бұрын
This one is the m129. He did the m128 review in another video.
@GlenKimpton Жыл бұрын
Cranked mine down and it was on 77lb
@Sentott97926 күн бұрын
Are the bow ok with 77 lb ?
@GlenKimpton3 күн бұрын
@Sentott979 no problems yet. Probably because it's so slow even on 77lb. I shoot Mach34 now. This I'd a lone bow for Mates now
@warrenjackson46592 жыл бұрын
That sounds familiar but it’s got American parts on it
@swillbill66403 жыл бұрын
Can you settle an argument please I just bought the m128 which they sold me as a machined riser but when I got it it is not its cast. I work with metals I can see its cast. Its a cast riser isnt it?
@mitchimal3 жыл бұрын
Yep it's cast. I have that bow too
@mitchimal3 жыл бұрын
He does a review on the M128 if you search
@swillbill66403 жыл бұрын
@@mitchimal Evercatch also known as Amico on ebay sold it to me the ad says machined riser. Been arguing with the bastards for days they swear its machined I told them I work with metals I can tell cast from machined. Bastards should be shot. I was going to buy the topoint one but price swayed me. It is a good bow to be sure but I hate being lied to.
@mitchimal3 жыл бұрын
@@swillbill6640 that's really frustrating.. you certainly couldn't get a bow from China from a 5axis mill haha would be bloody nice though! The riser is solid at least and not heavy so it's pretty good. Even the threads hold up great. Used a front and rear stabiliser which I take off after use and never had burring. I get it's false advertising but to be honest most of the specs are false advertising on this thing 🤣
@mitchimal3 жыл бұрын
@@swillbill6640 they sold it to me too actually, I just checked! Probably the same listing too. They say magnesium riser too...
@dougeldredge3 жыл бұрын
can i shoot it w/ fingers?
@StanielP3 жыл бұрын
You could but your draw length would determine how it would feel on your fingers. Usually you’d want a longer axle to axle when shooting with fingers around 35” to 40”+ ata.
@sahhull3 жыл бұрын
Why would you shoot a compound with finger?
@Toiletstainz2 жыл бұрын
@@sahhull because shooting barebow compound is fun. I can shoot very accurately to 30 yards and still shoot 3d comps out to 50y and still get respectable scores (usually around the mid way pack of guys shooting pins and release)
@dougeldredge2 жыл бұрын
@@sahhull thats how i learned to shoot,in the 70s, tabs or glove, no sights either, instinctive
@dougeldredge2 жыл бұрын
@@sahhull its how we shot them , in the day
@riokinmanuel79952 жыл бұрын
looks like a cursed mathews
@rafendosim543 Жыл бұрын
200.....200....200....200....200....200...200..
@adrian.r9683 жыл бұрын
For a 200 dollars now I don't believe that those are American limbs either.
@mitchimal3 жыл бұрын
They're Gordon glass. Not sure where exactly they're made but it's the same stuff as the US use
@matthew57913 жыл бұрын
It closer to $300. He has it listed for $280 despite repeatedly saying 200 or just over. Seems to make a habit of this.
@scottdebeaux783 жыл бұрын
@@matthew5791 probable what he pays
@Freedompatrol2 жыл бұрын
Looks like it wants to jump out of your hand when you shoot.
@chrisgaskell37062 жыл бұрын
Nah, mine just sits, I don't use a finger sling and it just sits there, I haven't shot it with stabs though.
@hulsmsc3 жыл бұрын
Looks like a Matthews knock off.
@greenhoodedvigilante4583 жыл бұрын
What do expect at $200?
@capricornmagic633 жыл бұрын
@@greenhoodedvigilante458 And the other thing is they all have to get their ideas from somewhere. I don't think there is one bow out there that is totally unique, that bears absolutely no resemblance to another bow, well maybe Oneida. Same goes for tennis rackets.
@kylergiroux28312 жыл бұрын
@@capricornmagic63 probably the only one that is truly unique I would say is APA, asides that they all rip off eatchother. But the Bowtech deadlock is also pretty unique.
@tristantotev28872 жыл бұрын
Or was it matthews who did the rippn
@grasonicus3 жыл бұрын
That bow is not set up for maximum pull weight.
@wcwcgarner27172 жыл бұрын
He does all his test at 60 pounds. So the bow would not be maxed out.
@knuckledragger2412 Жыл бұрын
Lil shorty is slow and gonna be hard to shoot.
@vanmanwales15903 жыл бұрын
The problem with Chinese bows is that they are all right handed.
@chrisgaskell37063 жыл бұрын
Not quite true, Junxing do a series of shoot through bows at different specs, the M106 is at the lower end and the M122 comes to mind which is a higher spec. One can be changed from right to left but they do one that is a true ambidextrous bow.
@vanmanwales15903 жыл бұрын
@@chrisgaskell3706 Yes I have the M106 but 95% of Chinese bows are right handed.
@WM-jy9dz3 жыл бұрын
@@vanmanwales1590 ...I bet approx. 95% bows of any other bow manufacturer are right-handed too 🤔?
@vanmanwales15902 жыл бұрын
@@WM-jy9dz No, not true. Left handed models are almost always available but on special order. Not true for Chinese bows.
@Life-of-Bluegrass_Music2 жыл бұрын
Problem is there junk.
@darryngalloway70242 жыл бұрын
Jinxing have just ripped off Border Archery’s Tempest design and IP. I wouldn’t mind if it weren’t for the fact that they are a small company trying to provide innovative products and can’t afford world wide patents (not that they worked well for Hoyt when they had their design stollen). I love this channel, but I can’t stand by and let these thieves market products as if they were there own design and as if they had spent their own money on developing the concepts. If you buy these products, you are providing the demand. You are to blame for the death of small companies and their drive to innovate.
@mitchimal2 жыл бұрын
It's actually a Mathews copy. But is different enough not to infringe on IP... I wouldn't get too upset
@tristantotev28872 жыл бұрын
Mate that's the reality of doing business no need to cry a river about it mate plus it lets people like me who can't afford the brand name stuff get into the sport chill matey
@barbellsandbowhunting2 жыл бұрын
My question is, why can I buy limbs for my bow (American) at around $350 USD with a warranty but these bows are less in total value? These bows only promote fuck heads and this why we see bin chickens, kangaroos and wombats with shitty fibreglass arrows in them! Keep it classy.
@WM-jy9dz2 жыл бұрын
you mean cheap goods / cheap labor promotes f ...heads? ....leaving all the fun stuff for the people who can afford to pay big $$ (which they save on cheap labor costs) and let the rest work for them for little $$ so they can buy even more pricier toys?
@barbellsandbowhunting2 жыл бұрын
@@WM-jy9dz it would seem that these cheaper products, being so throw away, don't exactly promote serious sport enthusiasts but rather a lot more of said fuck heads. Of course everyone starts somewhere with less expensive and lower quality products but I'm yet to see $20+ arrows stuck in native wildlife. Perhaps education and training is needed when purchasing potentially harmful goods?
@chethans74913 жыл бұрын
The things you can't do for the price with that bow , you can do in communist or underdeveloped countries where labor laws don't exist....
@WM-jy9dz3 жыл бұрын
...so i-phones should be much cheaper and it's apple that rips us off?
@chrisgaskell37062 жыл бұрын
You think China is under developed...
@chethans74912 жыл бұрын
@@chrisgaskell3706 no its a communist country that basically owns the United States thanks to our greedy politicians selling us out.
@humanitech2 жыл бұрын
Under developed countries??? I'm not sure where have you been friend.... but China, Asia and the Far Eastern nations, have been equal or as advanced (or are rapidly advancing) as any of our often polarised and complacent Western countries, companies and economies. As it's all swings and roundabout in profit based business... where companies will relocate their manufacturing bases, or worse buy in external products to rebrand and sell as their own.