The radiator tubes poped out the radiator at the end, dumping all the water, thats why I had to stop, the sled was not overheating at all beforehand.
@tonyduval24844 жыл бұрын
This is badass! Right when I started thinking I'd love to see this thing outside ripping around that's exactly what happened. Awesome build man I can't wait to see this thing complete and running tip-top 👌
@Pascal_Robert--Rc_Creations4 жыл бұрын
If you think this is ripping, you haven't seen anything yet😛
@tonyduval24844 жыл бұрын
Pascal Robert - Rc Creations yeah buddy I’m looking forward to a full rip video.
@landon_wilkinson4 жыл бұрын
Please keep building! Never stop! I’ve been watching you since I was super little and your videos are the realest things out there. You do amazing work man!
@dustinalexander9824 жыл бұрын
I want a brushless electric one that be so cool
@skullproductions94964 жыл бұрын
When will u be making more unit's so I could buy one
@SirSlyBird3 жыл бұрын
It's for sale on his website right now.
@boxedfender48104 жыл бұрын
Not sure why I'm here and what choices led me but I regret nothing
@DIGIT94 жыл бұрын
Just seeing this !! Its Awesome ! I tried building a nitro rc sled 30 yrs ago but never did get it to work ! You put ALOT of work into this one ! Well done !!
@665motocross84 жыл бұрын
If you build it they will come !!! I would deff buy one of these from you
@jmaclaren41474 жыл бұрын
Not when you find out the cost.
@haydencampbell8264 жыл бұрын
How does a man get their hands on something like this
@SwapSupra4 жыл бұрын
would rather have a brushless water cooled one but that nitro engine in a sled is the best thing i have ever see! specialy with all those feature!
@traviscool21214 жыл бұрын
Mind is BLOWN! Awesome work, Robert! I can’t believe you managed to do this. Congrats & best wishes with further research & development!
@SheldonMorris084 жыл бұрын
Truly amazing engineering, can't wait to see when you have it tuned.
@chrismcgaughey88524 жыл бұрын
Lol my actual sled doesn't even electric start, and this has remote start!
@PlayerOne3063 жыл бұрын
You wouldnt have a problem fitting all those specs and engine into the new bright RC snowmobile go with the yellow model if you do so anytime 😁
@KHSBikesCo4 жыл бұрын
You deserve to make money off this! Your craftsmanship is amazing, partnering up with someone local to make 20 of these I bet you could sell them and turn a profit. Sure expensive but die hards would buy it. Can’t wait for more operational videos!
@SirSlyBird2 жыл бұрын
This vid is a good refresher.
@KalebBauermk74 жыл бұрын
That is so sweet can’t wait to see it when it gets tuned out
@mixermanbear.40024 жыл бұрын
Absolutely brilliant!!! Just stumbled upon this channel. Subbed and 🛎
@dangrippe50824 жыл бұрын
Great engineering. You are a genius and I hope Bombardier pays you a chunk of money to mass produce and market this concept, both nitro and electric!
@steveh70274 жыл бұрын
Very nice build sir! I would suggest an onboard temp gauge to help tune. Running in the snow (snowmobile) the water cooling might be too much... Head temp must stay 190-205 to be happy... Think of the fuel as coolant and if temps are high tune it so temps stay where they need to be. Very anxious to see how it works out for you.
@steveh70274 жыл бұрын
190-205*f
@martyfield6944 жыл бұрын
Working on that would be a major challenge all on it's own
@rkproductions10614 жыл бұрын
This takes talent! Awesome job and great engineering skills man!
@hm800x4 жыл бұрын
Summer been busy.... definately your craziest, nicest and meanest project. Bref, sur la grosse coche !!!👌👌👌
@burke61764 жыл бұрын
U never disappoint pascal,I've been showing my son your videos,he was amazed! Awesome job
@Trad-Am4 жыл бұрын
Looks like it has a ton of weight transfer, like a real summit.
@sledmaker4 жыл бұрын
Got to give it to you, you've been busy with that mad lad😄 Hats off to you bud! 🎩
@hoppiemacv86044 жыл бұрын
That's totally Awesome little Build! Keep up the good work!
@martyarmendo84394 жыл бұрын
Absolutely mind blown ! I wish you lived closer ! I would honestly consider trading you my 1/1 snowmobile for this . This is a childhood dream of mine !
@kyleimmadinosawr4 жыл бұрын
i love these things so much i wish i could be lucky enough to have one, i hope these kick off for you and hopefully someday these can be bought in our local hobby shops good luck man keep up the good work
@yamadoo04snow4 жыл бұрын
That is freaking awesome what you are doing with that. I like the engine concept but that is one reason I like just the electric motors. Hard to get adjusted right. Every time you drive it the temperatures will be different and you will have to adjust it every time you go out. I hated having to adjust this with my trucks I had in the past. Once you get them running good they are awesome but we always had trouble adjusting them each time we took them out. Electric powered is awesome. Just got to buy a few extra batteries. LOL. Great job on the build though. That is awesome!
@Cliffprogarage3 жыл бұрын
Very very cool!!! Great work
@jhawk19854 жыл бұрын
So cool !!!!! You are a talented builder
@ParkerKerkhof-outdoors4 жыл бұрын
Dude these sleds are amazing please sell me one of your old ones 😂
@Trad-Am4 жыл бұрын
If you fill up from the fuel cap, like a real g4 summit, that's pretty cool.
@dextersxxxxlab3 жыл бұрын
Amazing project!! You told something about the suspension arms. That they were hard plastic at first but later made more flexible. does that mean also printed in tpu? What printer do you use?
@Rckid284 жыл бұрын
Can’t wait to buy the electric version!!
@camaroboy3834 жыл бұрын
@Pascal Robert 15 plus years ago I had an original tmaxx with the .15 that I made liquid cooled, Gary Conley from Conley precision (famous for his 1/4 scale v8 engines) had a line called Perry.. that line was specifically for nitro fuel pumps, one was oscillating and ran off vibration of the engine, the other ran off pos./neg. Crank case pressure.. the later is the pump I used to circulate water through the system, they have regulators on them as well to control flow.. that pump is about the size of just the motor on your current pump, maybe even slightly shorter in length.. I beleive this would be an ideal approach with no electrical and a smaller overall footprint for space savings... Being able to regulate the flow of water through the system will be beneficial to the engine.. Another thing you may find out is the exhaust may cause issues, you may have to come up with some sort of homemade can with internal baffling of some sort to produce the back pressure needed to supply the tank with enough pressure to supply fuel.. a pipe obviously would be ideal as the waves in the pipe essentially supercharge the engine, but a can with internal baffling would still function, just not as well... but will be loads better than say an open header exit... All that being said, thank you for the upload and sharing your work with the world... what I see is an excellent cad skill set and a deep knowledge of mechanical things, I'm sure many many people will gladly purchase the stl's... (something to think about if they are not currently for sale) Again thank you for sharing, and I look forward to progress on this project, make sure you check out those pumps from Gary.. hopefully they are still available for you, I briefly hit Ebay and there is one on there for sale..
@Pascal_Robert--Rc_Creations4 жыл бұрын
Thanks for your input, it's nice to see every once in awhile a comment that has more content then just two lines. I'm not the first one to water-cooled a RC. But I was the first to watercool successfully snowmobile (to my knowledge). Have not heard of these pumps, but the ones I got was quite cheap so for now I will probably stick with it. I don't think my flow is too aggressive to cause any problem to the engine itself. The main core of the head is quite chunky and the cooling is just around a head so it's a small space, and the engine can build up quite a bit of temperature with that middle chunk without hopefully causing too much problems temperature wise. For the exhaust, it was quite difficult to film it, but it's not open header, I've made a small expansion pipe with the proper dimensions of the Stinger related to the header size. So in theory it's supplies enough back pressure to pressurize the fuel line. It's not rocket science, but it's never meant to be a crazy horsepower engine in the first place. so I think it's going to work for now. That being said I'm grateful you took the time to type your comment. Questioning what people have done is a great way to improve them! Thanks!
@trevorlyle63814 жыл бұрын
that is a awesome machine, thanks
@darrenconnor69194 жыл бұрын
Nice creativity
@tomroethke4 жыл бұрын
Soooo I’m ready for this to be drag raced I wanna see how fast you can get it . Maybe try a first person project that would be cool 😎 nice video man that thing is crazy!
@yourselfdotcomlol4 жыл бұрын
You're like your biggest fan
@Pascal_Robert--Rc_Creations4 жыл бұрын
Thats an information I was not aware of🤔😅
@boxedfender48104 жыл бұрын
Well speaking for Myself if it wasn't for my own fan club I founded for Myself and became a member of.... I'm not quite sure if it would be something I would associate myself with solely because there just didn't seem to be enough positive testimony.... 🤔
@Trad-Am4 жыл бұрын
Only problem is, without a rider sidehilling, and all the mtn riding the sled is designed for, isn't really possible.
@northwestoff-roadopportuni71764 жыл бұрын
Wow that’s badass man! Would buy one for sure!
@Trad-Am4 жыл бұрын
Probably runs correct at altitude, it is a mtn sled after all!
@DIGIT94 жыл бұрын
Did you ever get it tested with the lower gear ratio ??
@CMBProjects4 жыл бұрын
Very nice project!
@bryantimms14694 жыл бұрын
Pretty rad man! Looks pretty awesome too, good work!
@oldmanriverrimington34424 жыл бұрын
Pretty cool toy. Bring your toolbox next time.
@harley2007eric4 жыл бұрын
I have to say this is the factor wow. bravo..
@projectpowersports4 жыл бұрын
Should build a rider that has a servo to shift him side to side or to the rear. To shift the weight around for more accurate handling
@boss-ll9iy4 жыл бұрын
That is the best RC snowmobile ever😱
@ryanlillie15434 жыл бұрын
boss 101 jordon Krupp google his sleds
@mikekoch9024 жыл бұрын
You could make a fortune... So many people would buy.... I know many people including me who would pay a lot of money for this.
@larryskustomcoatings94584 жыл бұрын
Only better job you could have done is make an Axys (Polaris partial). I've wanted a quality rc snowmobile for years!! I'll buy one, even if it is a Doo. Kudos!
@danelaforce17704 жыл бұрын
Any idea on a time when they would be available just can’t wait haha!
@jakepeterson33794 жыл бұрын
Hearing that little nitro motor die and bog out brought back cold and dark memories unleashing my PTSD of painstaking endless frustration tuning those God forsaken little motors that belong in hell. In fact the definition of hell can be summed up as worse than eternal burning in a pit of fire, an endless assembly line of nitro rc motors to keep running.
@Pascal_Robert--Rc_Creations4 жыл бұрын
Well, you heard it run properly inside, I just need to tune it for outside and fix the gearing. Shouldn't be too complicated right? don't quote me on that please😅
@Dwightsp264 жыл бұрын
That's pretty cool man I'd like to see it run with lower gearing and some clutching keep posting
@derkommentarschreiber36034 жыл бұрын
dude apsolutely my dream
@raphaelgauthier74814 жыл бұрын
Vraiment beau projet Pascal!!
@kollak014 жыл бұрын
WOW Like I stated in a previous video. TAKE MY MONEY NOW!
@Acestrex4 жыл бұрын
Thanks pascal now I’m hooked on deelyle! Haha
@NStraveler4 жыл бұрын
Evans waterless coolant might solve your boil off problem.
@Pascal_Robert--Rc_Creations4 жыл бұрын
Actually the water didn't boil off, it's because the line broke open so the water emptied itself
@johnroddy9314 жыл бұрын
Awesome
@ragnargustafsson43194 жыл бұрын
Sooo sick!!
@thechezzyjeff27654 жыл бұрын
Awesome!!!
@Trad-Am4 жыл бұрын
Gears are almost where the clutches should be.
@johnharris26834 жыл бұрын
Wow !!! Nice man
@shawnd6494 жыл бұрын
this is fucking awesome nitro or not you’d make a killing if you had enough to go in produ
@hunterspitz56203 жыл бұрын
Because I really really really would love to have one just like yours but black and yellow
@andrewpeters16584 жыл бұрын
Take it in the snow
@Rfdeeez4 жыл бұрын
Right on man that's so sweet!
@nitetrain71364 жыл бұрын
Would like to buy an electric model if you ever make them or will be selling them. Rc sleds are so cool. Do you build the entire sled to? Thanks
@sonsrc13264 жыл бұрын
Nice mate worth a sub 👍👌🏻
@BorisJonsson4 жыл бұрын
Sooo cool
@californiamotherlodeprospect4 жыл бұрын
Amazing work!
@TheTrumanZoo4 жыл бұрын
cool stuff. nice. sound is cool too :D
@erikm20034 жыл бұрын
Man that’s amazing great work
@nickdoesairsoft9394 жыл бұрын
Go to auto zone and get some exhaust wrap so u don’t melt the plastic
@petertothRC-FPV4 жыл бұрын
Good show very unique build🏆I have the Flysky Nirvana 14 ch.transmitter for flying fpv freestyle/racing love 💕it.
@denisdenis2034 Жыл бұрын
H ello at the end of your video engine your engine is running too lean. When you accelerate and the engine slows down before starting to accelerate the mixture is lean so you enrich it by turning the screw counter clock wise
@jok3yjesu3394 жыл бұрын
Tuning must be a pain in the ass lmao
@Acestrex4 жыл бұрын
Nice job pascal!!👍
@nelsonchapple39434 жыл бұрын
Do a Yamaha build! Yamahas are 4 strokes (quiet) so a electric one would be sorta realistic!
@Pascal_Robert--Rc_Creations4 жыл бұрын
I don't really understand your logic, Ski-Doo also has some 4 strokes...
@nelsonchapple39434 жыл бұрын
Pascal Robert - Rc Creations well electric motors are quite like similar to 4 strokes just a suggestion!
@nickradeke4 жыл бұрын
Now you need to figure a way to create a weight that is controllable to imitate a human body and use two separate joysticks to steer and balance. Something like the game MX vs ATV Reflex.
@martyfield6944 жыл бұрын
Nice Savage XL. I have one as well
@MsHigheagle4 жыл бұрын
Looks real ordinary! Lol it's a very nice flex but the cooler needs to be in the end of the tunnel and the weight has to be like 6 kg now which might not be efficient enough for the power a nitro has
@Pascal_Robert--Rc_Creations4 жыл бұрын
The cooler is so big that it's not really a problem of the placement. Id rather have it more close to the center of mass. believe it or not the weight is actually similar to the weight of the other one. Maybe 500g heavier, so its not the end of the world. Hovever, that small 2.5 is not the most powerful engine so yes it's underpowered a bit...
@MsHigheagle4 жыл бұрын
@@Pascal_Robert--Rc_Creations it's a great sled I do appreciate the thought you put into it all and to pull it off is super exciting man
@shawnd6494 жыл бұрын
i need to buy one been looking for some of the rush or ski doo models for your kits but no luck :( was gonna try convert the viper to fit your kits see how that works
@modzz2.0734 жыл бұрын
Wee needd more
@lemoneleven21794 жыл бұрын
just cut some holes in that side panel for venting on the exhaust side and cover them with a breathable water proof fabric like frogskin
@polaris4x4ridr934 жыл бұрын
matt dushane no
@lemoneleven21794 жыл бұрын
k?
@edvin21634 жыл бұрын
Hey, I've always been wanting to make my own rc snowmobile and seeing all of your videos made me start making one in CAD aleast, but I have to ask, how fast does the track spin on your sleds?
@Pascal_Robert--Rc_Creations4 жыл бұрын
Fast enough to get forward on the snow😅
@edvin21634 жыл бұрын
@@Pascal_Robert--Rc_Creations could you give me the motor specs and battery specs? and the gear ratio from one of your electric ones?
@Pascal_Robert--Rc_Creations4 жыл бұрын
@@edvin2163 I have a tekin 4300 KV on 3s lipo. If my measurements are exact, for one turn of the motor, 0.000021517 km is traveled. (Assuming no track slippage on the ground)
@edvin21634 жыл бұрын
@@Pascal_Robert--Rc_Creations Thanks
@UppfinnarAXEL4 жыл бұрын
Is that a flysky gt3c transmitter? I have one and it is very good
@BryanJohnson814 жыл бұрын
Very freakin cool!
@coryturner91404 жыл бұрын
Those nitros are a pain in the ass to keep running. I’d prefer electric all day long. Nice work though! Sweet sled!
@justinfatteicher20844 жыл бұрын
You should sell pre built rc sleds cause I would pay a lot if someone make a rc sled that’s nitro
@anthonyst-amand55554 жыл бұрын
Ou a tu trouver ce modele je veut un et jen trouve pas
@carsonsinclair92794 жыл бұрын
is this all custom?
@damper_turtle5404 жыл бұрын
How much would I need to pay for one?
@kraken2.0494 жыл бұрын
Damper_Turtle 2500
@hunterspitz56203 жыл бұрын
Would you ever consider in building more and selling them if so in your next rc snowmobile video can you give me a shout out and say Hunter I will or won't build and sell them
@Pascal_Robert--Rc_Creations3 жыл бұрын
No need to do i shout out, i can answer here. I will be making more snowmobiles, but they won't likely be nitro. i want to do a small batch later this fall/winter
@rosariom87454 жыл бұрын
y pamal beau ton ski dooo entouka une chose jaimerai ca acheter le pince gaz ???
@michaelc83164 жыл бұрын
I have an older polaris pro x rc snowmobile, what would be the easiest quick motor and battery swap out. Has the same set up as the factory rc polaris rush made my interactive toys, thanks
@Pascal_Robert--Rc_Creations4 жыл бұрын
Simplest setup : castle creations sct combo, 2200mAh 2s lipo, and a dx2e transmitter and rx. Any metal gear servo id good too
@michaelc83164 жыл бұрын
@@Pascal_Robert--Rc_Creations thanks for your input. Appreciate it, keep up the great work