10 Tips: How to Sublimate in a Convection Oven | Step-by-Step Tutorial for Beginners

Рет қаралды 41,666

Күн бұрын

Now that we've had tons of playtime sublimating in a convection oven, we're ready to share our top 10 tips on how to sublimate in a convection oven. Lots of trial and error, and quite a few successes, led us to this video. We're hoping that by sharing these convection oven sublimation tips, you can avoid the mistakes we made at first when sublimating in a convection oven and get to making perfect sublimation tumblers and more in no time.
In this video, we sublimate a 64oz growler from Johnson Plastics Plus. We joined their influencer program, and they sent us a wonderful goodie box with so many great sublimation blanks. We used quite a few of these to learn how to use our oven and then show you our top convection oven sublimation tips using the big one--the 64oz growler!
💰 SUPPORT OUR CHANNEL:
If you found value in this video, we now have the "Thanks" button on our channel, which allows you to make a small monetary donation to help us keep creating content!
GET SOCIAL WITH US!
📸 Instagram: / justmightdiy
🎬 TikTok: / justmightdiy
👤 Facebook: / justmightdiy
📝 Blog: justmightdiy.com/
🥤 Johnson Plastics Plus Products Shown in this Video:
🤑 Use this DISCOUNT CODE* FOR 5% OFF at JPPlus: 9PME6 🤑
64oz Sublimation Growler: link.justmightdiy.com/JPP-Sub...
10oz Short Tumbler: link.justmightdiy.com/JPP-Sub...
Stemless Wine Glass: link.justmightdiy.com/JPP-Sub...
Frosted Shot Glass: link.justmightdiy.com/JPP-Sub...
White Shot Glass: link.justmightdiy.com/JPP-Sub...
JP Sublimation Paper: link.justmightdiy.com/JPP-paper
Shrink Sleeves: link.justmightdiy.com/JPP-Shrink
Johnson Plastics Plus Promo code valid through 2022 for unlimited usage. Excludes equipment, ink, fabrication and STB subscriptions
🛒 OTHER TOOLS AND MATERIALS:
(Links = Affiliate Links)
Oster XL Convection Oven: amzn.to/3enES48
In-Oven Thermometers: amzn.to/3trE5DJ
Infrared Thermometer: amzn.to/3nQQ7oY
Epson EcoTank 2720 Printer (Converted): amzn.to/3sfsJC5
Butcher Paper - amzn.to/398q869
Paper Cutter: amzn.to/3uIscdy
Cosmos Sublimation Ink: shrsl.com/3mmhi
Heat Resistant Tape: amzn.to/2Phaa2L
Silicone Mat for Cooling: amzn.to/3nUNp1D
Heat Gun: amzn.to/3usQkRw
Heavy Duty Heat Resistant Gloves: amzn.to/3vLvCwD
Light Duty Heat Resistant Gloves: amzn.to/3ustM3p
Self-Healing Cutting Mat: amzn.to/2QkmEaF
Utility Knife/Box Cutter: amzn.to/3eNW3fn
3M Reusable Respirator + P100 Cartridges: amzn.to/3oKkgZ2 + amzn.to/3ISPLbF
Affiliate/Program Notification
We are a participant in several affiliate/influencer programs that enable us to earn a commission when you click on our links and make a purchase. You don't pay anything extra for the items you buy...we just get credit for referring you!
- We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
- We are also a participant in the Cricut, Cosmos Ink and Design Bundles affiliate programs.
- We are also a member of the Johnson Plastics Plus Influencer Program.
🎬 VIDEO FOR REFERENCE:
How to Convert an Epson EcoTank 2720 into a Sublimation Printer:
• How to Convert an Epso...
🎶 MUSIC AND EFFECTS ATTRIBUTIONS:
Rolling Heads - Unicorn Heads
Fantasy Land - Quincas Moreira
⚠️ DISCLAIMER:
Use this information at your own risk. None of the authors or anyone connected with Just Might DIY, in any way whatsoever, can be responsible or held liable for any injuries or damages resulting from your use of the information contained in or linked from the Just Might DIY videos or blog. It is your responsibility to use all tools and materials safely and take all steps necessary to ascertain that information you receive here is correct.

Пікірлер: 92

@JustMightDIY 6 ай бұрын

*Save More at Johnson Plastics Plus with Our 2024 Code!* Our JPPlus discount is now bigger & better! Go to: link.justmightdiy.com/JPP and use JustMightDIY15 for 15% off list price. (Valid through 2024 for unlimited usage. Excludes equipment, ink, fabrication & STB subscriptions.)

@stuartbonham1500 6 ай бұрын

Link doesn’t work!

@cathyhenderson6001 3 жыл бұрын

I've never commented on a video before but it made my heart so happy to hear you talking about crafting safety! It's SO important and rarely talked about! Thank you! Definitely subscribing you, this is the second video I've watched and I love what a great team you are! Happy crafting!

@JustMightDIY 3 жыл бұрын

Thank you so much for your kind words! Safety is SO important with DIYing - we’re glad that resonates with you as well! Happy crafting to you, too!

@LorraineCastellon-Rowe 3 жыл бұрын

Beautiful Growler!! Will definitely check out Johnson Plastics Plus!! Thank you for the great video and discount code!!! 🐙❣🐙💚🐙💛🐙🧡🐙💙🐙💜

@JustMightDIY 3 жыл бұрын

Thank you so much! We’re glad you like the growler - it’s so fun! Johnson Plastics Plus is amazing - so many great blanks and more!

@susannes2806 3 жыл бұрын

Love, love, love this❣️ Thanks bunches‼️

@JustMightDIY 3 жыл бұрын

We’re so glad you like it! 😄

@dean_duplantis 3 жыл бұрын

Great tips! The colors are so bright

@JustMightDIY 3 жыл бұрын

Thanks Dean, as always we appreciate you watching and learning with us. Stay tuned for the next adventure!

@gilpena9409 3 жыл бұрын

Thank you Very very much! Great tutorial.

@JustMightDIY 3 жыл бұрын

We’re so glad you like it! Thanks for watching. 😄

@likitarucker6614 3 жыл бұрын

Love your videos!

@JustMightDIY 3 жыл бұрын

Thank you so much! ❤️

@patriciajackson3883 11 ай бұрын

Thank You for sharing this information haw a Blessed Day

@JustMightDIY 11 ай бұрын

Thank YOU for watching! Happy crafting. :)

@Poor_Mans_DIY 3 жыл бұрын

if you can make it work in a microwave, we are all in! :-) Great tips and very informative video.

@JustMightDIY 3 жыл бұрын

Ha! If we had an extra microwave to test in, we totally would! Thanks for watching. 😉

@TheGrantAlexander 3 жыл бұрын

Great camera work with the safety gear!!!

@JustMightDIY 3 жыл бұрын

Thanks Grant!

@Desertphile 9 ай бұрын

"Influencer." LOL!

@JustMightDIY 8 ай бұрын

We’re honored to be a part of the program.

@TrendSmash Ай бұрын

Nice

@JustMightDIY Ай бұрын

Thanks!

@kinggreenorganics7658 2 жыл бұрын

I watched 3 videos and I am a fan. Awesome demos and very informative. You 2 make an Awesome team. Thank you

@JustMightDIY 2 жыл бұрын

Hey there! We’re so glad you’re enjoying the videos. Thanks for letting us know!! 😄

@JORGINHODONASCIMENTO 2 жыл бұрын

Hello there, i read all over your description but couldn't see the info about your respirator face mask. Would you please tell me which one. I started doing my basic learning but even with the fact that i use the oven outside and it's usually blowing some wind, i still feel like i've been having health issues due to the fumes. Please let me know.

@JustMightDIY 2 жыл бұрын

Thanks for watching and for your question! We're sorry it wasn't originally in the description, but it's there now. If you want what we have, you need to buy two things - the face piece and then the cartridges. There's not a lot of research out there on what kind of respirator to use if you're sensitive to sublimation fumes, but one that protects against Organic Vapors, Acid Gases and Particulates is what we decided on. We're happy with these but always recommend people do additional research to ensure their own safety. :)

@IraQNid 3 жыл бұрын

You two should try your hand a pad presses. Much safer to use for things like this. A viable startup business for decorating all manner of oddly shaped objects usually for promotions and marketing. I believe there are digital pad printers as well. I'd never have thought of using an oven for this type of work. Cool video.

@JustMightDIY 3 жыл бұрын

Thanks! Glad you enjoyed the video!

@meladenegallant8533 2 жыл бұрын

Can you explain more about this pad press?

@IraQNid 2 жыл бұрын

@@meladenegallant8533 Using KZfaq you can find the information about how these machines work. There are two types: Manual and Automatic. They're sort of like screen printers in that each pad is inked with one specific color and shape. They differ in operation though by how the ink is applied to each foam or silicone pad. The pads look like they are mounted to a drill press type of plunging mechanism. They are used to imprint coins, golf balls, glassware, cups, steins, mugs, baseball bats, eggs, pens and pencils, awards, and just about any oddly shaped object that traditional printing or heat transfer methods are poorly suited for. If you're looking for models that are specific to your country then include that in your search, otherwise you may end up seeing machines used or made in places like India, Communist China, etc where safety and efficiency are not as important or regulated.

@claudia8060 2 жыл бұрын

Where you can get the follow factory recommendation heating temperature?? You mentioned jp have it but how can I find them?

@JustMightDIY 2 жыл бұрын

Hey! JPP has “Tech Tip” sheets for most items that you can download on the item’s page. Hope this helps!

@TJ-yk8tq 2 жыл бұрын

Finally!!!! Someone uses photoshop!!!!! I knew I loved yall! I just started sublimation and did my first two tumblers. The colors are pretty and everyone I shows loves them and doesn't see anything wrong BUT I see the template on my computer and it's a lot more vivid and has more contrast them my tumbler...its not dull, burnt, etc. I would just like it to be colorful like your printout!! Any suggestions? Or do yall have photoshop videos for sublimation? I'm using all the standard print settings that are floating around Facebook to print. It looks like yall use the same print settings as I do too. Thanks!!! I use koala paper and printer jack ink, epson 2803

@JustMightDIY 2 жыл бұрын

Hey! Thanks so much for watching - we’re glad you’re here! We use all of the default settings for printing, so we haven’t tweaked anything inside Photoshop. We do tend to use really bold images (usually purchased from Design Bundles or Creative Fabrica) that look like they have great saturation, so that could be part of it. We don’t have any photoshop tutorials but would recommend increasing the saturation, brightness or contrast and seeing how that works. Test press on some fabric so you don’t waste tumblers until you get it where you want it. While images will always look brighter/bolder on screen since it’s backlit, you can definitely make enhancements to get bolder presses. Hope this helps!

@KelLee-wd3jb Жыл бұрын

Does the photoshop program come with the printer when you install the printer to your laptop? Or is it a whole different program altogether?

@ttv_wrx_sv7333 2 жыл бұрын

Nice video. Just something I did not get, how long and what temp. did you use for this one? TIA

@JustMightDIY 2 жыл бұрын

Hello and thanks for watching! Johnson Plastics Plus recommends 375 degrees for 7 minutes for this item. Hope this helps!

@kailawalker8909 2 жыл бұрын

Is that based on the shrink wrap or the sublimation paper?

@tiashasmith2305 2 жыл бұрын

Beautiful work do u mind me asking where did u get the oven

@JustMightDIY 2 жыл бұрын

Hello and thanks so much for the kind words! All materials, including the oven, are linked in the description. 😉

@madelinecanavan5933 Жыл бұрын

I noticed in the link in description that you have a respirator listed. Do we need this for this project?

@JustMightDIY Жыл бұрын

Hello and thanks for your question! We explain our thoughts on safety and why we choose to wear respirators when we're doing lots of sublimation around the 4:00 mark. We encourage you to research sublimation safety further, of course, and make the best decision for yourself.

@phall3426 Жыл бұрын

Mask awesome tip

@JustMightDIY Жыл бұрын

Thanks!

@shdelwhiting9908 3 жыл бұрын

Good Morning Where did you purchase the heat press for cups from

@JustMightDIY 3 жыл бұрын

Hello! We love to get our sublimation blanks from Johnson Plastics Plus. Link to their site and a discount code are in the description. 😉

@KelLee-wd3jb Жыл бұрын

Hi Guys, so that program that is on your computer, that you upload your images to or rearrange your design on, at the start of your video, does that come with the eco printer? As an install when you install the printer to laptop?

@JustMightDIY Жыл бұрын

Hello! The program we use is Photoshop, and that is not included with the printer. It’s a separate subscription. Hope this helps!

@KelLee-wd3jb Жыл бұрын

@@JustMightDIY thankyou so much, so with photoshop, could I upload a handwritten quote to edit it on there? Or even create designs? Or is it only used for uploaded pictures ?

@JustMightDIY Жыл бұрын

Hey - we only do basic graphic manipulation, so we're probably not the best to advise on which program you should use, as your use cases appear to be varied. Adobe does have a couple of design programs (Illustrator, Photoshop) that you should check out and some people draw digitally on in iPad with Procreate. We'd recommend looking into the capabilities of all of those. :)

@veronicajuarez3684 2 жыл бұрын

Hi! So with the sublimation tumbler press we have to use the mask too? I don’t know we have to use a mask with the oven😱🤷🏻‍♀️

@JustMightDIY 2 жыл бұрын

We encourage you to do your own research and decide what’s best for you. We tend to err on the side of caution when we’re subbing a lot.

@KelLee-wd3jb Жыл бұрын

Hi Guys, if I Freehand draw and colour my own designs on normal paper , do you know if I can use then to put on the mugs? How would I get my hand drawn designs from paper uploaded to what software? So I can use them on tumblers?

@JustMightDIY Жыл бұрын

Hey! If your printer has a scanner, you could use that. Alternatively, you can also try to use the camera on your phone. As for a program, try out the free version of Canva.com - we don’t use it for printing sublimation but have heard of some people using it. Hope this helps!

@tammympearce Ай бұрын

They sale sublimation markers that you can use to draw. Only downside is you have to draw the image mirrored

@rebeccareulet131 2 жыл бұрын

Can you tell me what you use to heat plates?

@JustMightDIY 2 жыл бұрын

Hello! Many multifunction heat presses will have a plate press attachment. We just unboxed the Starcraft. Video on that is here: kzfaq.info/get/bejne/ptR0itZjuJrJnqs.html Hope this helps!

@charjohn64 8 ай бұрын

What if you don't have a sublimation printer

@livandcompany 2 жыл бұрын

How are the stainless steel cups done?

@JustMightDIY 2 жыл бұрын

We did those shorter ones the same way - tape on a design, butcher paper all around, shrink sleeves and then in the oven. We always follow the manufacturer’s recommendations for time and temp, as it varies between sizes.

@dawndyer7661 Жыл бұрын

👍

@JustMightDIY Жыл бұрын

👌

@valentinehartley6755 2 жыл бұрын

I'm always hearing use a convection oven to sublimate but no one mentions do we set it on toast/bake/grill/comvection/turbo. I tried my new convection oven and heat press to sublimnate dollar store frosted mugs . nothing is working. i'm getting beyond frustrated. some one help please

@JustMightDIY 2 жыл бұрын

Hey! Thanks for your question. The oven needs to be set to a convection setting (the air moving is what keeps the temp even all the way around). On ours, Turbo is a convection setting, so it’s what we use. As for why your mugs aren’t sublimating, it may be because the mugs aren’t for sublimation. You need drinkware with a special coating on it that can accept the sublimation. We’d recommend buying some true sublimation blanks and giving it another try. If you have a Michael’s near you, they should have some Cricut mugs you can get your hands on quickly. Hope this helps!

@tajuana_on_a_mission Жыл бұрын

Y’all are too cute 😊

@JustMightDIY Жыл бұрын

Thank you! We appreciate you watching and leaving us a comment!

@chrisholland8226 3 жыл бұрын

my daughter is getting into sublimating on tumblers and is having a very hard time with getting good quality ink transfer. Particularly images with alot of black or black background coming out very faded. Any Ideas or suggestions? Her seams look terrible also, if we overlap slightly or we dont overlap at all she gets a noticeable white line from top to bottom. Any help would be appreciated.

@JustMightDIY 3 жыл бұрын

Hey! We can try to help, but it can be SO many things. Let’s start with issue of the ink transferring too light. Can you tell us the following: her printer setup (which printer and which ink), which sublimation paper she’s using, how she’s wrapping the tumblers (tape method, shrink wrap or other tumbler wrap), what kind of press or oven she’s using, and then the time and temperature? Also, which sublimation tumbler blank is she using?

@chrisholland8226 3 жыл бұрын

@@JustMightDIY not sure the brand of tumbler. She is using A-Sub paper off Amazon, Hiipoo Ink, and epsom ET-2760 printer converted for sublimation. Shrink wraps the tumblers and is using an oyster convection oven set at 375 degrees for 4 minutes. The first few we did came out pretty good, but the last few it seems part of the image is bright and vibrant and other parts aren’t.

@JustMightDIY 3 жыл бұрын

Okay great. First, that’s a wonderful printer setup, and we also prefer the shrink wrap method. The culprit here could be time and temp in the oven. Do you have two thermometers in the oven to double check the temp front to back in there? Ours has about a 30-40ish degree temp difference between the front and the back, so we make sure that the average is around 375 in the middle. That’s also why we turn or flip our tumblers halfway through the sub time so they can get even heating. We also sub for 6 minutes in total. And finally, make sure the oven is set to convection to keep the air moving. Give that a try and let us know how it goes.

@chrisholland8226 3 жыл бұрын

@@JustMightDIY ok. Her oven is pretty small, we have to lay the tumblers down like you did with the large growler, but I have ordered the two thermometers you recommended in the video odd Amazon. We will try the 6 minute method with a rotation half way through.

@chrisholland8226 3 жыл бұрын

@@JustMightDIY also, when you sublimate on something like a ceramic mug or ceramic shot glass do you use similar heat and time settings? Thanks for all your help

@RaBlockaaa Жыл бұрын

what size sublimation oven did you use

@JustMightDIY Жыл бұрын

Hey! All tools and materials used are in the description. Hope this helps! Thanks for watching.

@raywang727 2 жыл бұрын

Can i sublimate earrings on both sides in the oven?

@JustMightDIY 2 жыл бұрын

Hey! We haven’t tried that, so we can’t say for sure. Typically you’d want to use a flat press. But do let us know if you try it!

@robinmiller9871 2 жыл бұрын

How did you get it glittery?

@JustMightDIY 2 жыл бұрын

Hey! Which one are you talking about? The 20oz tumbler shown in the beginning is a Shimmer tumbler that we got from JPP. If you’re talking about the Octopus legs, that’s just in the image. We used Procreate to mask the octopus legs with a glitter background. Hope this helps!

@robinmiller9871 2 жыл бұрын

@@JustMightDIY the one that was in this video. At the end of the sublimation the design looked like it had Glitter in it.

@JustMightDIY 2 жыл бұрын

Thanks for the clarification! We had some b-roll of the shimmer tumbler in the beginning so we were wondering if you were asking about that one 😉. The octopus legs process to get the glitter effect is in our first comment. You can find tons of glitter images and backgrounds on Design Bundles. Hope this helps!