Did i ever tell you what the J in JVC really means?
Пікірлер: 44
@d.a.d.divorcedanddetermine8385 Жыл бұрын
I searched your channel for my issue but could not find it. I have a JVC HR-S3500U that I bought brand new 25 years ago at Circuit City when I was about 19 years old. I love that machine and have taken good care of it. I am having video output issues. S-Video or Composite gives me the same problem. The picture comes and goes. I have to jiggle or put tension on the cables to get a connection made. I have tried different cables and same issue. Posting on some online forums a few people said cold/cracked solder is the problem. Just wanted to check with you. Watching so many of your videos I know that you know your stuff!! Thanks
@markmarkofkane8167 Жыл бұрын
Unrelated: our first VHS VCR disengaged from the head drum when in FF, Rewind, and Stop. Except if it was scanning. Interesting video, looking forward to part 2.
@tall_dude1233 Жыл бұрын
I'm glad you found a good use for that DVD player from the last video. The fact that it's wall-mountable is really cool. The clear look you gave it is really nice! I haven't seen that model of JVC VCR before. Oldest one I've used was from 1992.
@Amp497 Жыл бұрын
I had a cat who played fetch. He died at 4 years from something that destroyed his liver. Thanks for the tips on the JVC.
@JessicaFEREM Жыл бұрын
Yeah superglue is preferably sold in small tubes, large tube may seem like a deal but having to use a whole tube of super glue is pretty hard if it's not your job.
@Oklawolf Жыл бұрын
What's fun is when those plastic pins only partly dislodge themselves and then you pull all your hair out trying to figure out why the machine won't lock in tracking anymore despite replacing that cap.
@LibraAudioLaboratory Жыл бұрын
Another failure of this JVC chassis, is the plastic pulley on the capstan motor, for the timing belt. Sadly with the time it's split in half, and jump out from the capstan flywheel. JVC make a service kit to replace this pulley. Or the cheap way is glue the old one, very firmly with the threebond.
@1marcelfilms Жыл бұрын
i always buy the cheapest superglue i can find. usually around 60 cents for 3 small tubes.
@crashbandicoot4everr Жыл бұрын
Yeah I am pretty sure you worked on this one in the past. I think you replaced the ELNA caps in the power supply and the little PG coupling cap on the drum's PCB.
@12voltvids Жыл бұрын
I'm sure i did as it belongs to my neighbour down in the next block and he is always walking his dog when I am working and pops in for a chat. I have worked on many devices of his and sold him a few that i was getting rid of as well. He has house full of vintage stereo equipment and even ended up with that old Sony projecton set I picked up at the side of the road. I keep telling him any time he wants to get rid of the seaberg jukebox he has in his livjng room to let me know but i am sure that will go to the highest bidder and that certainly won't be me.
@richardbrobeck2384 Жыл бұрын
for sure !
@nigelsears7191 Жыл бұрын
if you keep the glue in the fridge it lasts a lot longer
@jdekong3945 Жыл бұрын
hi Dave, any advice for cleaning & re-lubing CD/DVD mech motors that cannot be disassembled? had some joy with Deoxit D5 on the platter & sled/traverse motors but I`m not sure of the longevity of the repair
@richardbrobeck2384 Жыл бұрын
Just a little super glue and your back in business I have repair more of those JVC's then I could count also the older Zenith VCRS where made by JVC too same issue .
@12voltvids Жыл бұрын
Done hundreds of these, and the zenith / jvc units.
@JessicaFEREM Жыл бұрын
LG really missed the chance to make the DVD player into a turntable type design. That would be cool if they made the lid clear or only had a small square where the Lazer is to pass safety checks or smth.
@12voltvids Жыл бұрын
It's LASER Acronym for Light Amplification by Stimulus Emission of Radiation.
@JessicaFEREM Жыл бұрын
@@12voltvids I've said it both ways in the past
@nakazul1 Жыл бұрын
1 like for cat, and 1 like for JVC and a thank you for the video to the creator ✌️
@ford1546 Жыл бұрын
There is no such thing as universal glue. I have used super glue a lot and know that it is not all types of plastic that super glue sticks well to Often the plastic almost always becomes weaker where you glue than it was before. Especially the type of plastic that can withstand a lot of chemicals such as petrol and acetone, superglue does not tend to sit well. On my Ford Mondeo mk4 on trim covers, superglue does not sit very well. Superglue is hard and therefore a bit brittle if you use thin layers. That doesn't mean superglue is useless. superglue works for some things but not everything
@12voltvids Жыл бұрын
Did this look like plastic i was glueing? No it was metal. It doesn't work on nylon for example.
@jasonthejawman5442 Жыл бұрын
Another one restored
@superdznuts99 Жыл бұрын
How do I get my Sony betamax 6800 to take up tape the take-up is not moving?
@12voltvids Жыл бұрын
belt or idler
@Nantawat_Kittiwarakul Жыл бұрын
Recently got a JVC VCR (forgot the model no., but early 90's HiFi ones) with erratic behavior. Probably dirty mode switch - easy fix isn't it? Turned out that the mode switch was buried DEEP in the chassis, tightly sandwiched between the main cam gear and the metal frame. I had to literally tear the entire mechanism apart to access that switch and give it a good cleaning - a simple 10 minute work that eventually took the whole day to complete.😵 Although they did invent VHS, but how they overlooked this small but critical design flaw like this is beyond my understanding.
@12voltvids Жыл бұрын
JVC took credit. Sony actually was codevoloper of VHS. It was one of the systems that was rejected. There were 4 systems being worked on by Sony, sanyo, Toshiba, NEC,Panasonic and jvc. The only other one i ever saw was sanyos vcord. Sony's beta was technically the best of the 4 as it was a scales down version of umatic that was already on the market. Everyone signed off on betamax including JVC. They secretly launched the m system that was named after the threading pattern. They renamed it VHS and claimed they devoloped it when it was a collective effort by all the Japanese companies with Sony contributing the most. When Sony launched their first vhs they printed on all the sales literature and brothers that they were co-developers of VHS. Had this not been the case JVC would have sued them but they didn't because they knew that they basically stole the design.
@Nantawat_Kittiwarakul Жыл бұрын
@@12voltvids Now I remember something. Saw some YT videos ages ago about attempting to play Beta tape in VHS machine and vice versa (forgot the link, sorry). To my surprise there's some almost recognizable picture & sound output, therefore they must be not too technically different. And that seems to fit well with your explanation too. So yes JVC would probably "borrow" the same technical principle from Beta during development stage, adding some modification and wrap it up in bigger shell, and release it as VHS. However the actual reason that caused Sony to flop behind would be (imho) their own misdirection, not the technical issue. Anyway they eventually strike back with Betacam format, and literally conquered the studio/professional market ever since. So they're sort of even at the end.😁
@analogvideochannel4612 Жыл бұрын
@@Nantawat_Kittiwarakul The on-tape format for both were relatively similar and an incremental improvement on earlier formats like umatic. It was with stuff like betacam which was stored as component on tape and later with digital formatst where you got a drastic difference in how the video was stored.
@12voltvids Жыл бұрын
@@Nantawat_Kittiwarakul betamax drum size is larger which results means the resulting video track will be longer and at a shallower angle. As the track is longer and the head drum is the same the relative tape to head speed is faster. The color under frequency is also different. Betamax used 688 which is the same as 3/4 u-matic. VHS is 629. 8mm was higher at 733khz. When Sony devoloped betamax they were also working on BETACAM format at the same time as a replacement for 3/4". Sony (and everyone else in Japan except Matsushita and their subsidiary JVC, bet ya didn't know that did you? Yes jvc and Panasonic are related just as aiwa and Sony) was on board with a single format and betamax was the chosen format. The unnamed VHS format was shelved or so everyone thought untill surprise it wasn't. Sony as the inventer of beta wanted a royalty for every machine made. JVC gave away the patent on VHS for a single licence fee but no per machine royalty. This allowed VHS to dominate the home video market. They did try to get a professional version of VHS working but it never caught on as they had technical issues and because the tape was larger the resulting camera was larger and heavier for the broadcast format. BETACAM had become an overnight success in broadcaat. The M and M2 didn't do much. A few broadcasters used it because Panasonic gave them equipment trying to dethrone Sony but it didn't work. BETACAM became the world broadcast format. Sony made much more money selling betacam machines than they lost on home beta. It dominated professional and broadcast markets right to the end of tape based formats. It became digital and then HD.
@speedyboishan877 ай бұрын
How does VHS look on a 65-75" TV. 😂
@12voltvids7 ай бұрын
Like shit.
@alex1520 Жыл бұрын
It that the kitty that was hogging the food bowl for himself in a past video? 🤣
@12voltvids Жыл бұрын
He always hogs the food bowl. Can't you tell.
@zx8401ztv Жыл бұрын
Has it got a dirty mode switch, vcr's can do some really funny things :-D
@12voltvids Жыл бұрын
It was cleaned a few years ago.
@janchristensen9858 Жыл бұрын
What radio station are you always lising to in the backgroud… very relaxing
@12voltvids Жыл бұрын
Wave983.fm is the streaming site for it. It's a new station on the air in Vancouver on 98.3. Well new as of last summer.
@kmp22_3 Жыл бұрын
you are retro pro repairer, i wonder if you can repair PAL VCRs , i have one that is 80% damaged , when it powers up the head drum will start way faster and crazy without respond
@12voltvids Жыл бұрын
I'm sure i could but the thing is it probably isn't worth it.
@kmp22_3 Жыл бұрын
i have vhs tapes waiting to be digitalized but i need a working vcr do you have cheap best VCRs?
@connorm955 Жыл бұрын
J in JVC = junk
@bobsbits5357 Жыл бұрын
hi have a mate that works in a good win kind of place in the ok he always coming over with gear i say what now have you got i know him for a very long time i have a cat as well she not a fat one the more she eat the more crazy she will go just sit and watch me all the time my one is very clever one she knows me very well
@PedjoGT11 ай бұрын
Hy man I need som help with my jvc hr-d960eg I changed all caps in power supply and mecha belt on right side....vcr is woke up....if i put cassette he slide tape inside without streching the tape and freezes...cant power off or on unit....only unfreezes if i roll back mechanic with hand....it is mode switch or? Tnx