awesome let me know how it does on the big 4hr drive please

@@ExocagedRC The 46kg JX servos lasted the Pro-line event but I didn't drive it much so it's not much testimony of their strength yet.

@@tomlucasrccrawlers9108 thats still good news

@@ExocagedRC Reef's just debuted a Triple-9(999). Talk to him at length(probably 40 minute yesterday morning)at the Pro-line event. We talk about marketing and engineering and the work that went into the 999. It's a completely new servo from the ground up....only thing it shares with the 444 and 555 is the bottom case. Top case is all new , plus additional CNC work to it to fit the bigger stronger gears and the much stronger motor. Many other features that make it more durable and completely waterproof(not water resistant). We talked about 3 companies that he's aware of that's "crapply" reverse engineered his 555 servo and selling them using his specs but can't do anything because they are out of china. We talked about 3Brothers RC. They had their T-shirts on and were walking around...I hate to say it(and unfortunately) but they were talking "smack" about other manufacturers. I like Tom's ACIS SIX 6-pole 906 but his direct-current servo and outrunner is technology took'n from Holmes-Hobbies. He needs to stick to his staggered motors which are really good.

@@tomlucasrccrawlers9108 From what I can see its a knockoff and rebranding world out there with these things. I will most likely end up with a new 999 to see if it can break my tester lol. That would be epic!! As far as competitors talking smack, that's just not professional IMO.

Yep, a copy of the Holmes Hobbies v1 servo. Holmes Hobbies v1 replacement gearset will drop right in.

Yeah they are all looking very similar lately

@@ExocagedRC JRH as quoted - "Since I had my v1 SHV 12v servo knocked off by JX (ex employee of my OEM that stole a lot of files), I was interested to see how much it was just a visual knockoff, and how much was 100% copy. One vendor is using JX for his "14v" servos, so I picked up one as well. It has a little higher torque output, which tells me they probably upped the PWM output a little. Hook them up to my programmer, not a surprise that they connect right up. Yep, just a little higher PWM. Not just a knockoff, a complete ripoff of my v1 housing, motor, gearset, and control board. "

I’ve been talking with John as well and yeah he’s told me, nothing is safe from the Chinese guys just taking and rebranding. I have two of those 14v servos on the way and another JX cheap 20kg or something like that will test and use in something.

I don't have a video on me making it but it cost around $30 in parts not counting the welding and metal plate.

kzfaq.info/get/bejne/btiYqsSqrNfad40.html

@@STEVOD313I like it! I'll have to see if they used the same case as the 3brc or Holmes servos, they are all looking so similar lately.

Its splashproof

@@DixielandRC oh Thanks..👍

@@DixielandRC are you sure?

@@pinkoschwarz9761 Yes, They changed it from waterproof to splashproof when they found a spot water was getting in

@@DixielandRC oh i m very very happy. I just buy for my trx4. Where do you see that is only splashprof? Because on ebay it is still waterprof. I would return in this case

I got two more coming that use a jst straight from a battery up to 4s. Should be in my hands by end of next week.

Don’t think so but I haven’t tried

@@ExocagedRC thank you for the reply! I found there is a 12v version with a jst and servo connector for running on 3s directly but I'm wondering if it's the same servo with different connectors. Thanks again. Your help is very much appreciated

Built it with parts from here and parts from there, only two like this in existence and I built them both. lol

And speed test + load speed tests would be crazy valuable 🥳

I currently don’t have a way to verify speed. The conversions from oz in to kg isn’t always accurate. When I test out a new set of servos I’ll include the kg in there.

Exocaged RC could be slowmotion video to log speed frame by frame. How many frames from A to B, in a loaded and unloaded scenario. But yea, i know the complexity increases exponentially. 🤭

If you could add the kg messurements overlayed or by hitting the “unit” tab on your scale, it would be amazing though. 🤭

I power them directly from the main battery plug into the esc. So 2S 3S or 4S is fine. If you connect it to one of the two batteries ( not sure why you need two batteries ) yeah it will drain that one battery a little bit more, but if they two batteries are wired in parallel it will be fine.

@@ExocagedRC thanks. And i run two batteries because i run 6s on a be6s and i cant fit one 6s on one side so need to use two smaller 3s one on each side. Thanks. I did more research and figured it out.

@@ExocagedRC i mist have explained it wrong my servi has 4 wires two seperate plugs they want me to run the power off of its own 3s battery and plug the other lead into the reciever. . But i get it now thanks man

no idea but I'm sure Sean will give it a good test

I try to keep them in stock, but its really hard to do. I hope to have some in stock next week. dixielandrc.ecwid.com/JX-Servo-Aluminum-Case-HV-Corless-Digital-Steel-Gear-Servo-46-kg-0-12-Sec-@-7-4V-p114395030

DixielandR/C are they only splash proof not water proof ??

Yes. Splashproof.

xXG.L.HXx yeah this servo has ratings that are too high for what it gives. I tested the 555 and it’s amazing. I hope to get a 999 before too long but my only wish on new servos is that they are compatible with straight 3S. It’s nice to not need a bec or a bypass.

@@ExocagedRC Either a JST going straight to the servo or a built in BEC would be great. I use a Castle BEC 2.0 and it works great but I'd love to eliminate the clutter on my TRX4. Looks like the Triple 9 will not have either but it will be tad cheaper than the current Futaba monster.

yeah simple JST, that is what makes the G13 so valuable. I'd love to put a set of 999's on Grimlock 3, man that would be epic, oh and I'm recording pt 4 with Servo On Axle up front with new printed brackets from 1Tenth RC. Also got some for the Redcat Portal axles so with any luck I'll get more recording time Sunday. Just when I run out of stuff to record....They all come in, LOL

@@ExocagedRC looking forward to the new videos!👍👍

Eduardo Schiavon the gears feel good not sure if it was this model or the 12v model but one of them times out under steady load and goes into a neutral state. It’s been a while since I’ve run this servo and it looks good on the tester.

Exocaged RC got it. I’m sure the amount of stress and load that sends the servo to neutro/protection mode, is more likely to happens with rc cars. But it is a good point. Cannot have servos going to limp mode on an airplane. Again, thank you so much for the video and input

Eduardo Schiavon if you aren’t in a hurry I have info of a new servo on the way from reefs rc 300oz and .04 speed. LoL that should get the job done.

Exocaged RC wow! That’s fast. How long do you think? Hv servo?

Eduardo Schiavon I’m guessing a few weeks on it and yeah I’m sure it will be hv

they probably tested it right at the servo horn which im sure it would reach those numbers. its like anything these days they setup an unrealistic test in their "labs" and then post that as advertised power, etc. technically not false advertising but not realistic. you see it alot with cordless powertools these days.

I like it enough I have 3 of them now, I need to put one on the tester but it seems to be the same as the normal 46kg but higher voltage gives it a bit more power. The package says 12v but the sides of the case say 14.4v

@@ExocagedRC just ordered one and will fit it on my trx4 defender with alot of brass. so hope it can satisfy me. but im eying on the reefs 555 but will wait for the V2 of it to come out. thnx for ur infomative vids. all the best.

Jr Duenas yes I have. Just solder up a JST output off the battery plug, when you plug in the battery, servo gets power. Also 3BRC has an adaptor to use the balance plug to power it if you want.

Thank you for the quick reply. I was afraid I was going to fry the receiver if I did that.

For some people on lower budgets that $40 is a lot of money.

I understand, sorry if I sounded rude.

Yeah I think so.

Thanks hehe. BTW the jx 46kg is not really 46kg it's only 24.2kg just sharing to you what I know. 😅

So far it’s doing really good. I’ll probably get a few more of them soon

@@ExocagedRC cool thsnks for the feedback

@@ExocagedRC have you tried those powerHD b2 hv servo ?

Not sure I’ve heard of that one. I’ll have to see if I can find them.

Are they waterproof or splash proof ?

Wolfpack 718 25t

This is an old video I need to remove it, with time I have come to realize they are not so good.