Every video used to be a banger, but now they’re all ~20ish minute bangers! Channel direction has been phenomenal this past couple months.

Great job SPOON you killed it 👏

The whole crew you’ve put together for yourself is dope my dude keep reappearing the rewards of your hard work

I would recommend Jimmy to make moulds for the fenders or get as many replacement fenders so that this car won't be down for getting fixed as often, you can pop on the new fenders to fix damages and making other panels ( replacement panels ) from fiberglass will be really helpful. You can work on making them on the side

We gotta see a B haul/spoon build on the channel!! Two absolute units coming together to build a drift car for the whole crew would be the best!! Loving the SpoonSpec touch on the E36🤙

The look on Spoons face when talking about his work is amazing. So stoked for this team coming together

I can’t wait for the e36 to be done it’s going to look sick

That cage color turned out 100 times better than I expected. LOVED it.

I’m so proud of you Jim. You are so creative and clever. It takes skill and dedication to film everyday and edit. I will start making a video, and 10 minutes into working on a car, get pissed off and stop recording. And you are so nice to all your friends, that is amazing. We need more people like you in this world. Thank you for what you do.

watching as jimmy has upgraded his team and his cars so well over the past few years has been so cool. they love what they do and they're good at it. much love and respect for the crew.

Honestly just love the genuine enthusiasm you guys have!

The e36 came out really good , like too good , the colour matched raptor liner is the Chef's kiss ,I can't wait to see the whole car complete

The 86 is sure starting to take form. Looking damn good.. But that paint work by Spoon is absolutely killing it. Dude knows how to work!!

Glad to see T3 suspension components on this build. I love all my FB Rx7 T3 parts

Man I have become such a huge fan of you and the whole team. You've got a hell of a crew and the content has been superior to most. Keep that shit up.

I can’t wait for drift week, I’m glad you’re doing it this year

You really do have one of the best channels.....period. And Spoon was an amazing addition to the already amazing crew that you have. Keep up the cool content.

the bar that stops the rear axle moving left and right is called a panhard rod. The rear axle setup is called a 'live axle' and the downside to it is that as the suspension compresses the rear wheels will shift slightly to one side due to the panhard rod

Spoon is too nice with it. Happy that he joined the crew and pushes Jimmy

Damn Jimmy, I hope you’re paying my mans well. The quality and effort he puts in for an employee that just started working for you is irreplaceable. My guy just started and already building you an FDish car!? Jezzzus..Keep up the good work spoon! As a fabricator myself, I’m impressed by the work you’ve done in such a short time. Jimmy‘s team don’t sleep. Keep it up boys!

I’ve said it before, and I’ll say it again. Spoon is an amazing addition to the team! His talent is unmatched!

Spoon is an absolute Master Artist!

Love seeing T3 parts! Local to me and a bunch of nice guys. 86 progress coming along so quickly!

Spoon is a monster! You can tell he truly takes pride in his work! Love the builds going right now!

honestly, these two builds have been the most fun to watch on your channel. keep up the good work!

Spoon kinda is the best thing that happened to the channel honestly, great dude

Spoon is the best thing that happen to this channel In a long time So stoked to watch what’s coming from it!

1 word for the E36.... BEAUTIFUL 😍 And Jimmy not to be a bother but the last Nissonda video was 4 months ago my brother. We miss her Jimmy

Must say the love in the shop while making beautiful machines is what makes love this channel

I love hearing big steve ask questions and stuff like with the four link. I feel it give a good perspective of the incoming car enthusiast

T3 and the guys are super nice and great customer support! Worth purchasing fasho

Wanna see side quest Steve once a week. Would be a fire segment

I would recommend putting clear wrap over the roll cage where you climb in and out.

That red and silver color combo HITTIN!

love seeing spoon so happy, he looks so much more comfy on camera now

For road racing and grip stuff I highly recommend switching from a 4link to a 3link or torque arm setup. They are way more forgiving than the 4 link driving wise. The switch on my truck made a huge difference and I picked up tons of lap time

I offense to everyone else but spoon and Steve d pushed and progressed this channel in such a positive way. Growth is good!

I got sick over the weekend and still am but watching your vids is making me feel a whole lot better! keep up the good work y’all sending all my love!

I'll say it every time how is this man not at a millions subs? Its a border line crime

2:30am in Aussie, was about to to to bed, but couldn’t pass up a JimmyO upload 🤘🏽 Bmw is looking so freakin’ good!!! 👌🏽

You should put plastic tube end caps on the reinforcing of rear subframe to get rid of the two holes in tubes

Spoon is definitely the best piece of silverware you've add to the shop. 😉

Man Wayyyyy back in the day I have the Techno toy Rear link and panhard. Asolutely awesome stuff. Those Hymes are bigger maybe a little bit because I kept breaking them. T3 took the time to reach out and sent me the bigger ones and I never broke them again. Greattttt people. Also the 86 Short shifter is to this day my favorite mod ever. It was brilliant!

Jimmy! Take advantage of the Irish boys on drift week to learn as much as u can of corollas!!!!! Suspension set ups, parts and stuff.

The raptor liner kits are great, painted the outside of my brother Land Rover defender with it and looks awesome

Dude so happy to see that floor, my dream is black floor, gloss green interior, definitely steel it cage or white

You should go back and edit back in when Spoon said not to half ass it. Bam! Proof Son! Hell yes, that interior is poppin

Love how the Steel-it darkened up!

As a TEQ boi I'm so hyped about toyota chassis content

never changed jimmy.been watching since the early days.keep it up.

Spoon isn't kidding I did a raptor liner video on My channel and had never shot anything with a spray gun until that day. Stuff is like magic to shoot and lay down

Y’all better be watching all the ads Support the homie

Check Modception for an indestructible rear axle, made from a Pajero axle to fit straight in an AE86.

Dude raptor liners double diamond clear coat. Is the best clear in a can I have ever found it lays so smooth and clean. Very little prep needed and it's awesome

Spoon is the man !! Great addition to the crew .

Ahhh i really love these colors on the e36, I think a great recommendation are metal door cards that match the cage

So the next question is???? When is there gonna be a jimmy and spoon Collab for Sema ?? Everyone knows you guys would Kill it!!!

Found your channel from the e36 back when you first built it. So good to see it getting love again.

I hope Jimmy paints the 86 red. Red cars just hits differently.

man remember when you were cringing when the gutting process started, its these moments that make it all worth it, my boi spoon kills it once again.

Jimmy I'm so stoked for you for 12/3 if you know you know but it explains a lot with the E36 I'm happy for you keep doing your thing💯💯🔥🔥

This is dope since spoon has been here he’s finally made jim move forward with a pro car 👌 he’s a great addition to the channel AND your wallet 😂😂😂

As far as the rear set all arms to factory length. Then if ur gonna change anything change just the lower to center the wheel in the rear wheel well. Then take a angle finder and set the pinion angle to -2. That should get you in the ball park. As far as centering the rear you want to do it at ride height and mostly center it. ( just a universal cheat sheet to get you started)

Love that this vid came out as soon as I go on lunch break 🎉

Ant: “I’m a little nervous” Jimmy: “Why you nervous?” Was so ready for Ant to say “warrants” 😂😂😂

Jimmy you the goat of automotive youtube. Keep being you!

Wow that front spindles on the coilovers is something I've NEVER SEEN 😳 Looking great tho boy's 👌😍👍👏

When he says “did you show them the table”. All I saw was 4k worth of worth of suspension parts. Good luck fellow 86 owner.

Spoon is a beast!!! That came out 🔥🔥🔥🔥🔥🔥

Steel-it ftw, the contrast with the paint looks amazing!

Jimmy. Really stoked on the direction of the channel, changes and how much more you're growing. Definitely one of my favorites to watch cause there's no bullshit drama and just good brotherly builds. This past year has been crazy for you and can't wait to see what's next!

With all the work Spoon has put in the E36 it should be nicknamed the Spoonigan. A little hommage to Spoons amazing work.

The large bar that holds the rear diff centre is known as a panhard rod. ✌️

S14 front suspension for the next upgrade for the ae86 later on! I run only schassis front suspension on my 86s after years of dealing with the height/loss of stroke issues on these.

Your boy Spoon killed it. Dude man up and hug that guy fur his work . Super spoon shirts please 🙏. A spoon🥄🛩 flying with wings . And a cape. Super spoon

Spoon is a beast. Great job brother.

Pumped you went with TTTs' stuff, always impressed by their quality

Casters effect on suspension is self steer. 0 caster gives very little self steer, wondering and the "shopping cart wheel wobble effect" It's other effects are wheel well centering as well as how much the camber changes when fhe wheels are turned. 0 caster will give no change in camber while ghe wheels are turned. The more caster the more camber roll

Dude, this channel since the addition of Spoon has taken a step to the top 5 Car KZfaq channels I watch and anticipate.

Murdered out Black Ae86 with black n gold suspension would surely support the engine bay 🔥‼️💯 True Trick & Treat 🔥‼️

Man, what I would give to be a part of this crew. Y’all got it made and I’m jealous. None of my friends are into cars like myself.

The techno toy tuning kit looks amazing

actually the REAR end is same, Just shafts little shorter on lsd and the lock(just cut some off from non LSD axle and it fit to lsd. if not it will hit inside lsd). The disk also. But shafts same pineon etc just same. Kouki have bigger shafts. the fourlink should be measured of stock bars before install, they are pretty close. Panhard little off if lowered car. the four mount is there so you can extend arm longer, and angle stay realtive close of stock

Channel going on a great direction w spoon don’t overthink it Jim

Very cool seeing some T3 parts on there. Hope you like them!

Put thick clear vinyl strips that cover the roll cage in places with high traffic so the paint lasts longer.

You gotta give mike some love and try too get this man some subscribers he’s been killing it with his content lately and some jimmy o collabs would be sick

Spoon is on a whole 'nother level, the E36 looks crazy good!

From Texas and looking forward to seeing you drive in Houston Jim!!

My mate done like a nardo gray bed liner in his type r race car and it came up mint

Lol what the bet after spoon is done painting the e36 it will look to dam good and jimmy won’t want to thrash it , so hyped on it spoon spooned it !

Absolutely loving all the Jimmy O content

Love what the addition of spoon to the team is adding to the channel and builds, oakes garage keeps leveling up. Keep up the great work guys 😎

The quick steer rack is going to make it heavy with drift knuckles on and you won't be able to run much caster. You should fit the power steering rack in it

This vs whatever Adam's CRX ends up being in a grip race would be sweet.

86 is looking so good.

If its a track car look into floating hubs and bigger axles then you can add camber to the hubs.

Jimmy I don't do red cars, but that looks amazing, bringing Spoon on board was gold, for a drift car this is going to be very impressive Mr, Rj in Oz

The 36 deserves a dope ass livery

The real joke Jimbo is that every car that you own needs or needed a paint job 😅 BIG LOVE