K1 Mini 10W Laser Engraving Machine for Titanium Engraving
Рет қаралды 968
4 ай бұрын#diy #laser #lasermachine #lasercutting #lasercuttingwood
@gabucarneiro 3 ай бұрын
I just realized that you didn't use the air assistance to the task.. it would probably cool the material too much, right? By the way, this module is amazing! I've working with it for a while already, and it always surprises me. Really good job, guys!
@gabucarneiro 4 ай бұрын
Can it cut MDF 6mm?
@Lasertree 4 ай бұрын
Can cut 6mm MDF very well. 150mm/min, 2-3 passes Cutting 5mm MDF. 240mm/min,8-10passes cuts 9mm MDF.
@gabucarneiro 4 ай бұрын
@@Lasertree Can you show the technic? So far I couldn't achieve this task. Even with slower passes
@Lasertree 4 ай бұрын
You can refer to the newly released video.
@cybersushireviews 3 ай бұрын
@@gabucarneiro it does cut as above we are just running tests with our machine
@gabucarneiro 3 ай бұрын
@@cybersushireviews Thank you! I just tested it, really cuts! 4 passes for a clean cut, but 3 would do it already, 120mm/min, 90% Power.
#ДелайВсёСам
Рет қаралды 1,2 М.
Khabar SPORT
Рет қаралды 370 М.
Small Fry Creations
Рет қаралды 543 М.
kukomio
Рет қаралды 83 М.
kywilco369
Рет қаралды 15 М.
Gadget GenZ
Рет қаралды 18 МЛН
Gadget GenZ
Рет қаралды 18 МЛН