Kabolite 336GC Upgrade

Рет қаралды 20,370

TNC Excavator

3 жыл бұрын

Kabolite 336 GC
Upgrade sound module and pilot

Пікірлер: 20

@minitoyfamily Жыл бұрын

I like your video ❤❤❤❤

@matpp7736 2 жыл бұрын

Y..., toda la instalación con una mano 👏👏

@lucatirino2455 3 жыл бұрын

Top 👌👍❤️

@TorKungChannelRC111_Retrogames 3 жыл бұрын

🤩👍👍👍👍

@carloscabrerolinares6122 3 жыл бұрын

Es todo electrónica y sensores.

@tncexcavator2538 3 жыл бұрын

Real hydraulic and pump control valve

@dids3012 3 жыл бұрын

Which sound unit is it ? And where to purchase from please ? Thanks david

@mareali 3 жыл бұрын

Hello, have another question. With your excavator with the sound module, the switch "C" on channel 9 is occupied on the remote control. I did everything exactly as you showed it in your video. Have you made any further settings on the remote control? In your video, the sound module can perform 3 simulations, with me unfortunately only 2. Also, only the first stage is identical, the second also links completely differently with me.

@mareali 2 жыл бұрын

@@dennis21111990 Hallo, hatte schon lange auf eine Antwort gewartet. Nun hat es funktioniert. Bei mir ist es der Kanal 10. Belegt habe ich den Key C. Soweit ist alles gut. Bei der Stellung für den Leerlauf schaltet mein Modul automatisch aus. Bei der Fernbedienung habe ich nun in den Einstellungen „End Points“ beide Werte auf 85% gestellt. Dann geht mein Modul im Leerlauf nicht mehr automatisch aus. Hello, had been waiting for an answer for a long time. Now it worked. For me it is the channel 10. I have occupied the key C. So far everything is good. When the idle position, my module switches off automatically. For the remote control, I have now set both values to 85% in the "End Points" settings. Then my module will no longer go out automatically when idle.

@mareali 2 жыл бұрын

@@dennis21111990 Hello, had been waiting for an answer for a long time. Now it worked. For me it is the channel 10. I have occupied the key C. So far everything is good. When the idle position, my module switches off automatically. For the remote control, I have now set both values to 85% in the "End Points" settings. Then my module will no longer go out automatically when idle.

@mareali 2 жыл бұрын

@@dennis21111990 Before have you attached your module to the hydraulic block? I will try a small magnet that I can attach to the housing of the sound module. On channel 9 is the all-round light, which I control with the "Key B". This is the button under the remote control. This is a button that can actually also be connected to the horn. Then you don't always need to switch the D switch.