^^ If you found this video helpful, don't forget to subscribe to my channel! I usually post videos to help others on this channel. In case of any emergency assistance, you can follow @KapilAryaMVP and tweet me at twitter.com/KapilAryaMVP . I'll try to help you ASAP.

I've learned more from Indian guys on KZfaq then I have in my entire 12 years in school

After watching too many videos and reading too many articles about how to fix this. I can't believe that your only tutorial can help me solve my problem. THANK YOU VERY MUCH

Fir anyone still stuck in an auto repair loop, the following worked for me : "Choose Troubleshoot > Advanced Options > Startup Settings. After that, the computer should restart and then will give you a list of options. Next, choose Disable early launch anti-malware protection. After that, restart your PC and check if the Windows Automatic Repair not working issue has been resolved."

Thank you very much! You help me a lot with my pc problem. You're amazing. Keep on uploading videos like this.

This fixed my problem that was driving me absolutely insane! For some reason my computer was booting to windows 7 rather than 10. Thank you for the help, keep up the great videos!

I am jealous of ppl thanking him bc it didn't work in mine 😭😭

You're a G my guy. Your fix worked for my brother's laptop, much love!

what an easy fix.. it fixed temporarily but saved all my data.. thx man

So far this is the best video ever🔥🔥🔥keep up with spirit broo for me it has worked 100% guarantee

No matter what I do , it takes me right back to the automatic repair screen right back to the beginning . I’ve watched dozens of videos and done everything they say and it just takes me back to the beginning !!!

I looked at MANY other videos to help Me, and YOURS was the only one that restored My system. I tried for a day and a half. All I did was take out all sata SSD drives and cables and just had My New PC build working great until I remembered that for some reason, the Sata Port had to be the same one as when it was originally installed. FS1. Thank You so much for helping Me fix my very expensive Desktop heavy weight and letting it be My New PC I had used for only a few days.

Just tried this and it worked like magic, you are the best bro.

This worked for me. Took ages and screen stayed black for 15+ minutes but eventually I got the blue screen and all went well from there. Thanks very much.

Thank you Kapil, My laptop is 11 years old HP, with this issue I thought it needs to be replaced but your solution gave it a new life, amazing job keep it up.

Mine is on endless restart loop, tried the on/off trick a hundred times but no repair options. It even cancels the CMD prompt when it force restarts

Thanks alot my guy you saved me from paying over the phone for an simple reset. (Feb.16) all the way from Florida

This worked for me, usually don’t find success on these types of videos so thanks a lot. Amazed at how a few simple commands can fix something I couldn’t figure out.

I have my laptop not booting up, have a task that was near its due, and I am almost breaking down cuz my laptop is not booting up. Thanks to this guy, he saved my life, lol.

Wish I found this video before I thought restarting my whole pc was the only way thanks man

Thank you bro! Tried every video but none helped. This video helped. Thank you so much ! Thought to format but you helped without it.... your great !

I just had to enable automatic repair and wait but because of you showing about auto repair, I couldn’t fix it without you! You’re my saviour, thank you so much!

Thank you so kuch for this video ❤️

You are a genius man. After having my computer being caught in a loop and uploading with the windows background for more than three hours, the computer was restored in 15 minutes after trying this. Thanks a million!

I genuinely didn't think this would work, but it did! Thanks so much. btw for me it asked if I wanted to add a windows installation to the boot (drive I think?), I said no. It worked fine!

This is brilliant, saves the pain of a rebuild, thanks very much indeed for this 👍👍

Any advice for if this does not fix the computer?? This made no changes and I'm still stuck in the restart loop.

Your video is the first to tell me to fix bootrec. All the other video told me other things like chkdsk that was not helpful. So because of your video i can restart and do a chkdsk. So far disc has no crash!!!!!! Reached 70% cause of fixing bootrec!!!

The automatic repair doesnt work, it doesn't read a bootable windows, it just star in a black screen

THANK YOU SOOO MUCH!!! I was about to reinstall Windows and spend the next 3 hours reinstalling everything.

I might be late but thank you so much sir! My pc has been booting for hours and now it boots in less then 2 minutes :) Thank you!!

Well done Kapil. Your tutorial is simple, useful and concise.

Thank you so much. This video was a life saver I wish I found it hours ago.

After watching 1000 videos I finally got and answer Thanks man this really helped.

Love all your tutorials. Thank you so much! New subscriber here💛

I wanna describe my situation and how I fixed it in case it can help any other pc idiots out there like me who have no idea what they're doing. My Situation: So a couple of days ago I upgraded my HDD to an SSD but decided to keep the HDD for backup/less important shit, instead of doing a fresh install I just cloned my HDD using "Aomei backupper" and for about 2 days everything was working fine, I changed my boot drive to the SSD in bios and had no problems so I decided to wipe my HDD. well the next morning when I went to turn on my pc I got the recovery screen with the error code "0xc00000e". I spent about an hour on youtube following all these tutorials of what to do in the command prompt but nothing was working. My Solution: I kept getting errors like "path not found" when doing the "bootrec/rebuildbcd" command and when I looked this up online people just said "type diskpart, select disk 0, select the partition, type active, etc." but when I typed "active" I would get a message saying "selected disk is not a fixed mbr disk" and what I found out is that for whatever fucking reason I have no idea why but my C drive was the E drive all of the sudden so in the command prompt I typed "bcdboot E:\Windows" (It might not be E for you maybe it is C or a different letter but if you type "bootrec/rebuildbcd" and it pops up saying Windows installations:1 and has a drive under that then use whatever drive that is but for me it was E) and then I typed "exit" and then in the advanced settings where the option to go into the command prompt, bios, system restore, etc. is in the top left box said "continue with Windows 11" instead of "startup repair" like it did before so I clicked that and my pc started up normally.

Just had to wait a bit but eventually window booted up thanks my guy

Thank you, bro. Work perfectly!

Thank you for this advice! When I got to the screen to either restart or advanced options, I clicked on advanced options and the screen is staying blank blue. I'm not sure what to do from here.

Im having an issues and have been stressed out of my mind if you could reach out to me id be so grateful i feel like you might know how to fix it. Having issues with booting up due to unmounted ram volume that was change to be 128 when i have 32gb of ram now every time i tried to reboot i get blue screen and different errors when trying to use command prompt and trying to clean install and reinstalling windows. Was wondering what you would do and is there a way for me to reset my settings when not given the option by replacing any hardware?

Thanks Sirji... It worked for me.. God bless you.. keep helping

Thanks man! I thought I’d have to reset everything again and lose all my files.

This man is a lifesaver. Thank you so much. I will like, subscribe and share your content! Thank you

Thank you bro ❤️ I tried every single method but this one was the only one which worked for me I cannot thank you enough 😭

Thank you!!!! I thought it didn't work, but you need to wait like 3-5 minutes and let it stay on the blank screen. It came back up after that.

I did it but my pc went right back into automatic repair and says there was a problem when you started your pc and won’t let me do anything I’ve watched 100s of videos and nothing is helping idk why but thanks for taking your time to make this😭😭😭😭I wish something would work

After following your instructions, the screen went black for about 10 minutes, and then went back to the “Automatic Repair” screen. Any ideas on what I might try next? I really appreciate your time and effort! The video was great and seemed to work for so many others...hoping you have some wise words for me.

Certainly, I find your channel highly useful, so I subscribed. In this process, I required to give a password. However, I had not set a password. So, I was wondering what my password was. Then I tried several previous passwords, thinking that I had forgotten my password. Technically, the didn't work. So, finally, I left the password cage blank and clicked 'Enter' and it was OK. So thank you so much for this highly useful video. बहुत बहुत धन्यवाद कपिल आर्य।

Not a computer guy so for me threat level was off the charts. Your advice was welcomed relief. Thanks.

Thank you so much! It worked brilliantly!

Thank you Brotha you a life saver i very much appreciate you im a sub now!!! but can you do a video on what is the right things to delete out of your C drive because mine is always full and i dont know what to keep or delete Thank You

Thank you for doing this video. I have gotten to the enter password part and I am entering my login password and it says it is incorrect? Is this the same password I would usually log into the computer with or something different? Thank you.

Your solution worked perfectly for my 2014 MacBook Air dual boot Windows 10 setup. Thank you!

You're my new best friend!! Amazing, you saved me! Thank you.

Morning . I have done that but my laptop keeps going back to the page " Automatic REPAIR " .I am stuck and don't not what else to do besides sending it away. All my personal info is on it. Do you think you have any further ideas to get windows back up running ? Packard bell Celeron Notebook (Model Barrichello-C)

Thanks a million man! I can't thank you enough for my increased longevity from tremendous stress and headache spared. Much appreciated 🙏

My pc just gets a BSoD when it’s preparing automatic repair

Amazing job. Thank you so much! Saved my work computer.

Note that if you dual-boot with Windows and Linux, these commands will kill Grub and you won't be able to get to Linux anymore. Apparently if that happens you can boot from a Linux live CD/USB and install and run boot-repair to restore Grub. In my case the problem was that Windows had suddenly forgotten which drive to boot from and was booting from drive F: when Windows was installed on drive D:. I could see this because I picked "advanced" in that recovery menu and opened the console as specified and ran bcdedit. This had "osdevice" and "device" set to "partition=F:". When I changed to D: and typed dir, I could see that it was the drive with Windows installed on it. I typed these and then rebooted: bcdedit /set {default} osdevice partition=D: bcdedit /set {default} device partition=D: And that fixed it. I have no idea why Windows suddenly decided that F: was a better drive to boot from.

When I try this it asks me for a recovery code instead of putting my password in, am I doing something wrong? And after doing it the screen is still grey, do you have any other fixes?

Yo! It worked thank you so much for making this video!!! You saved a lot of people!

Thank You, However, what do you do if win will not go past the boot-loop, will not allow modifications to bootrec , is on GPT, & there are no restore points? Yet for some in-fathomable reason, ms expects you to have a working win 10 - in order to repair / re-install win 10 without trashing yours system, apps, settings, data etc (which took months to create). Used to be that an ‘in-place-up-grade’ was possible on prior versions & that could be scripted as a non-destructive refresh & even run remotely Is there any way to do something similar? Thanks.

Hello my friend. Thank you very much for your video. I have tried everything you did, but unfortunately I still cannot proceed to login screen. Could you please help me further? What should I do? Thank you in advance. Best regards.

OMG I WAS ABOUT TO RESET MY WHOLE PC AND LOSE EVERYTHING CAUSE I DIDNT BACK UP BUT U WERE MY LAST HOPE AND DIDNT FAIL. OMG I LOVE U

I followed everything and still got sent back to automatic repair.

You saved my life man! Thank you!

Well, i am glad that this worked for so many people. My unit keeps booting into Automatic Repair. This fix did not work for me. Any guess?

what if you can't get into advance options? I just keep getting into preparing automatic repair follows with 20 circles across the screen.. bios from usb wont load anymore either.. just loads into black screen.. or restarts back to preparing automatic repair and more spinning circles?

love u bhai ... it totally worked for me .... thanx bro ... i can't controll my emotions... stucking in between like this is such a drag for me ...

Will it still happened when I install windows 8

I must have a serious problem because I tried this and unfortunately it didn’t work for me. My computer freezes on the boot screen and I can’t go any further. The mouse starts to light up and then it just shuts off while the computer tries to keep booting.

I have this exact problem. when I sign in, it will not accept my password which is the same for my Google email. I thought to be sure I would make a new password using my cell. It doesn't accept the new password. I was able to boot and check the drives and it says no issues.

you are a life saver man!

You're a life saver.. I reinstalled my windows prior when I wasn't able to log in. Then it happened again after a few hours later. Your video helped a lot.

Thank you brother, was stuck in the endless boot loop. Thank God I'm out now, should be good now insha'Allah

At 3:11 it says "total identified windows installations: 0", how is this classified as a successful operation? rebuildbcd command doesn't work for me. It actually identifies 1 windows installation; I add it to the list, then it says "the system cannot find the path specified"

Restarting two times did it thank you very much

Thank you for the tip unfortunately I tried this a couple of times and still just the windows logo and the dots chasing themselves around

Dear Sir, Thank you very much for this video. It solved problem in my laptop and worked 100%. Once again I am very much thankful to you

What if I messed up converting from mbr to gpt, can I convert back without data loss? Or do I just change mbr to gpt on that other instruction?

Windows has never repaired itself in my 30 years of owning

This fails to work, so obviously the problem is not generic, there are various reasons why it will not boot, and this only covers one of those reasons.

Hi Kapil, I need help here. I had installed an SSD in my old laptop and had moved my windows, software and data - all of it to this SSD. Now I have to install the same SSD in a another laptop replacing its HDD. When I try to see the contents of this SSD by connecting it via a USB connector, it shows me the earlier bootable partition in the SSD as a Basic Data Partition. Also the new laptop is unable to boot from it. Tools used in your video - BCDboot, Bootrec are not available in Win10 or Win11. My requirement is that once I make this SSD bootable (as an external drive), I will replace the HDD in my recent laptop with it. Is it possible to get a step by step guide?

Salut hai bhai tere ko i moved in my home town every shops are literally far from where i stay now and obviously time is precious you helped lot ❤️

It just goes back to square 1 for me

Unfortunately it booted into "preparing automatic repair" screen after trying the command prompt 😞

Thx, had a frustrating problem. Now solved thx to your info 👍.

You need to remove 100% working solution clickbait - of course this did not work for me and just put me right back in the same loop.

Bro...i did commands as u done same then hp logo opened...but hp logo appeared and the loading dots gone struck...what should i do now...can i wait for sometime ?

2:27 what if i forgot my password ? because i have :( i was using PIN to sign in and i don't know what password windows asks me PIN : doesn't work Password : Doesn't Work

Damn you are the man! This worked perfect for me. THANK YOU VERY MUCH GOOD SIR!! 🙌🙌🙌

What if a person doesn't remember the login password when trying to bring up command prompt or other advanced recovery options?

YOUR A LIFE SAVER! TY SO MUCH!

Thanks a ton for making this video. Really helpful

You're such a genius. Thanks alot the video is still living on🙏🏾

followed the exact steps in the video.However thecommand bootrec/rebuildbcd returns with "identified windows installation 1"instead of 0 as in the video and failed tp boot

Horeeee....INDIA You save my life sir...big respect from INDONESIA...

BRO!! Thank you so much! It really helped. you are really helping a lot of people through this tutorial.

Hi, I have tried to boot to the advanced screen from trying to crash several times but it won't, so I have to boot from a windows installer USB to enter the advanced section, but when I click on the command prompt option I don't get a sign in screen like you do. But I follow the commands but when I reboot it still just says reboot and select the proper boot device.

I did that but the only thing that shows on my screen is the computer manufacurer's logo. It won't move past that screen and it doesn't go into automatic repair mode.