Karcher K2 Repair.....Or how to repair your Karcher power washer twice.

Рет қаралды 33,874

Жыл бұрын

In this episode I show you how i repaired my Karcher pressure washer
Facebook : Kyusha Style Tuning
Instagram : @kyushastyle
TikTok : Kyusha Style Tuning
All music written, performed, produced and copyright of BigEnd! 2023

Пікірлер: 37

@Mar-po9os 2 ай бұрын

Thanks, in the end we figured it out and today i cleaned my terrace again 💪🏼 it’s working!

@RasDil 3 ай бұрын

Have the same issue. Thank you for making this video. !😊

@KyushaStyleTuning 3 ай бұрын

Your welcome. Hope you get yours fixed. 😃👍

@Brett440 Жыл бұрын

Well done on saving your Karcher’s life. I never knew they stripped down to that extent.

@KyushaStyleTuning Жыл бұрын

Thanks mate. It’s surprising how many parts you can get for them now too. 👍⚒

@chrisgallivan1673 Жыл бұрын

Hi I did the same cracked the elbow taking it apart getting the starter button to work .daft question, how do you get the elbow off the hose to the gun I ended up dismantling the light grey piece by its still attached given up for today but glad i found replacement part .Good video was about to chuck it away .

@chrisgallivan1673 Жыл бұрын

Got it sorted 👍

@KyushaStyleTuning Жыл бұрын

Glad you got it sorted. 😎👍

@prnfl 24 күн бұрын

IT WAS THE FUSE IN MY CASE

@KyushaStyleTuning 23 күн бұрын

Glad you sorted it out. 😎👍

@jonbjornestad6322 Жыл бұрын

Just repaired mine with this vid thanks

@KyushaStyleTuning Жыл бұрын

Excellent! Glad you found the video useful. 👍

@stuartlight2893 7 ай бұрын

Great information thanks

@KyushaStyleTuning 7 ай бұрын

Glad it was helpful!

@julianreme Ай бұрын

Thanks for the video. I dismantled my K2 and replaced the pump head. The pulsing is still there, though. Do you have any other ideas?

@KyushaStyleTuning Ай бұрын

Check for leaks on the intake or outlet pipes. These can crack with age. Glad you liked the video. 😎👍

@toffeepie1878 4 ай бұрын

Thanks for the video, I need to do the same - I got a bit carried away with my K2 and hooked hot water from the kitching sink into it- - I think I will need new O rings plus that head you replaced - did you replace any main O rings on the motor itself - does the head include a gasket / O ring?

@KyushaStyleTuning 4 ай бұрын

Glad you liked the video. The head came with gaskets already fitted. Plus the intake came with new gaskets and grease. You can get pretty much every part for them now though. 😃

@paulstir 4 ай бұрын

Great job , my switch has gone £10 eBay

@KyushaStyleTuning 4 ай бұрын

Thanks! It’s good you can basically get every part for them. 😃👍

@paulstir 4 ай бұрын

@@KyushaStyleTuning indeed , I ended up jamming the switch in the on position, now I just turn on and off at the plug lol , I will get round to buying the switch, also has a slight leak

@paulstir Ай бұрын

Just an update I have replaced my switch and the cylinder head , fully restored pressure washer 😁👍

@KyushaStyleTuning Ай бұрын

@@paulstir excellent! Glad it’s all fixed. 😎👍

@paulstir Ай бұрын

@@KyushaStyleTuning thanks to your guide, cheers brother all the best

@andrewboxall8460 11 ай бұрын

What is the amount of oil in (milli-litres) do you need to put in on reassembly of a Karcher K2?

@KyushaStyleTuning 11 ай бұрын

Hi sorry but I’m not too sure as I didn’t have to refill mine as I kept it upright when taking it apart. You should be able to find the info on the Karcher web site though. 👍

@Mar-po9os 2 ай бұрын

Do you have a picture of how to put the wires back? I didn’t made the picture 😢

@KyushaStyleTuning 2 ай бұрын

Hi. Sorry but I don’t have the pic anymore. You might be able to download a wiring plan from Karcher