Check out our version 2 it has more features.

Check out our version 2 it has more features.

KatCab V2 has that feature. Here is the link, musician.tools/katcab-version-2

It only works with passive speakers. Line out is for powered speakers.

you already have the line out for your FRFR speaker ther no cab out on these combo that why this is great cant wait to try the Katana on my 2x12 mojotone greenback BV25M and BV30H

We have a universal model for all other amps. Here is the link musician.tools/vox-peavey-line6-marshall-fender-blackstar-boogie-carvin-sunn-external-speaker-mod-u2-speaker-cable

@@musiciantools I plan on getting the proper jack & wiring it up myself. I like doing little DIY projects like that. & I can do it all for about $10-15 tops.

We have Version 2 that let's you use both. See all options kzfaq.info/get/bejne/qt6cidKGqZuvgYk.html

@@musiciantools 👀👀👀👀

You will have to check the manufacturers specs on min and max ohms.

We have 2 versions a universal one and a katana model.

You are amp cable and plugging the KatCab between the amp and the speaker.

I’m sorry, what does that mean?

@@ScottDMoore Sorry for the typos. Yes, you connect the modkit between the amp and the speakers. Just 2 wires Red & Black.

This is version 1, version 2 let's you use both.

You have poor comprehension. That is not what he said.

Crazy separation anxiety between the upper amp (eq) and the lower speaker itself so basically the power coming down fries the whole thing

It works the same, you disconnect the 2 wires from the amp and connect them to the modkit. Then you connect the 2 wires from the modkit to where the amp was connected.

Probably depends how they are wired series vs parallels. Either way, you won't want to crank it too high. It was designed for one speaker.

@@MOAB-UTwould cranking it damage the amp “head” or the mod kit? cuz if you plug a lower power amp into a cab. It shouldn’t really do any damage to the cab or the amp

@@lilgarbage3796 Depends on the specs. Most amp heads can handle a 4 ohm load e.g., 2 8 ohm speakers wired i parrallel. I do this all the time without issue. If you start mismatching impedance and go down to 2ohms and crank it, you can smoke a head and toast a voice coil (if you over power the speaker based on it's ratings.) Also, some effects like sine waves can toast a lightweight speaker easily- like an acoustic paper VC speaker design. The Katana is overall a beast. I doubt 2 8 ohm speakers will phase it. On the back of mine, I can slect between various Ohm levels as well. I also have a Y cable coming out of my Tube Amp, a AB/Y splitter and numerous stereo outs that can go to various amps spread wide apart which sounds great with Ping Pong delay. Do protect your ears if you like it loud. I got tinnitus and you really don't want this. 10+ years- never stops. Never ends until I am dead...then finally some peace and quiet!!!