Actually really refreshing to see someone makes mistakes and share with us how to remedy them. She's honest and letting us learn from her mistakes.

Peroxide will remove the burn also lay butcher paper on the press and on your garment. I used card stock in between my shirt, it’s thicker and protects the shirt front and back. Great job I love your channel.

Love the fact you are so transparent... I truly appreciate you taking the time to show the do's and don'ts... keep up the amazing work 🥰😍

First off love your videos 🎀 I use a Breyer roller to push the sub spray into the fabric. I also use like a fine mist as to not soak but to eventually apply the sub spray then I let dry either overnight or just by placing the shirt on the press without closing it just so the heat from the top plate will help speed up the drying. That way I don’t get that burn on my fabric. I find this method works best for me hopefully it will work for someone else.🎀

Good job! But I use Dyepress Sublimation Spray, it turned Yellow because you used too much spray and you should break down the spray a little more with more water it was too concentrated. It is supposed to be sprayed lightly not saturated, saturated but not too wet. just a tip to get the best results. And yes get a spray bottle that has 2 different spray settings and spray across stop go across again below where you sprayed and continue until you finish the area , not up and down or s. I know it says spray twice but I only spray once. Better to have too little than too much because you can always add more. Too much spray yellows it because of the concentration, trial and error we learn from our mistakes.p.s too much spray and saturation is what is making your paper stick. Too wet on the front and was not thoroughly dry on your last shirt. Hope this helps!

Where has this channel been all my life I love have you show when things don't go right it makes me feel more at ease about my own mistakes. Thank you and keep the videos coming

I am just getting ready to start my DTF and sublimation apparel printing bussiness . So far it's been a lot of research. I want to say I have learned so much from you. Your videos give me the confidence that I need to jump. Thank you so much.

Hi I really appreciate it that you are being 100% genuine!!! Because you could of just Edited all your mistakes out but you didn't!!! But can I make a suggestion? I think you need a heat-press PILLOW on the bottom of the heat press & attach TEFLON paper with MAGNETS & it will always be there & your HEAT PRESS & your projects will be protected. Thank you for videos 💛

Thank you for your tutorials. I watched a video that showed them rolling the spray on the shirt with a small paint roller to get an even coat on the sprayed area.

I like that you show the mistakes some people videos you never see any and the when we try at home all kinds of things happened so thank you for keeping the good and the bad on videos.

I’m a new fan! Just came across your page and I’m obsessed! Your videos are so informative and you keep it real, mistakes and all! Love the transparency!

Great job. I like that you were honest about the mistake. There are instructions that says to put a towel underneath on the heat press. That may reduce the burning.

I have BEEN sleeping 😴 on ur channel but not any more THANKS for all that u Do 💐🥂❤️

Your content is so good. I didn’t lose interest at all. I’m a fan! Even watching the printing is relaxing. You and I talk to our printers the same way. Thank you:)

I’m only through your intro and I already LOVE YOU!

When sublimating on fabric tear the design paper instead of cutting it, the straight cut edges will leave a line on your garments - Just found you in January and love your videos keep up the good work - Be Blessed

You have a new truly 100% follower in me because girl you are a blessing that truly will push me to get it done and know that I can.

*_Thank you for sharing_* Keep Motivating us all !!!!!!💯💯

I so love your transparency!! Thank you sooo much for all the “tea”!!! Keep up the positive influence!!

Thanks for letting me learn from your mistakes! Appreciate your content!!

There is another bottle hairdressers use to spray a continuous mist which may help distribute the solution. I don’t know anything about sublimation and I’m learning with you but I do know about the bottle. Sold on amazon

I've not used any of the sprays, but when I do my shirts I have a Teflon sheet on the bottom plate, then my shirt (With copy paper inside), then lay my design on the shirt, copy paper on top of that, and then Teflon on top of that then press. I am not sure if Butcher paper works the same as parchment which is what I started out using, but a friend who's been doing this longer than I have let me know when we were talking about my colors not coming out as bright, I knew they'd not be extremely bright because I've yet to find 100% poly, but my shirts at the least so far are 50% with a few 65%, but he let me know that parchment paper does not allow heat through(which after his explanation of using it to bake with made total sense) and to only use Teflon. with copy paper in between. I don't think he even covers his with the copy paper he just puts the sheet in between his shirts. But I didn't want to change it. Mine have been coming out so much better. and with the Teflon on the bottom plate, my shirts never stick and I do both sides almost every time. Also, Dollar Tree sells some nice spray bottles :) Sometimes they're in the hair/makeup aisle (smaller ones) and the larger ones are over in the cleaning aisle usually where the brooms and mops are I've been buying from both isles for years every now and then I get a large one that is jacked up, will work for a week or two then the handle you pull to spray will break but it's so far and few in between that I just chuck it in the trash and go up to the DT and grab another :D Anyone have any good sites to buy in bulk/wholesale for the White Shirts though? We have a hard time finding any local that is even 50/50 but we are just starting out, and funds are sparse so trying to find where we can get anywhere between 50 to 150 multiple sizes for under $3 a shirt (going off total price)

I tried to do double side sublimation before and had the same problem. I feel your pain! I love your videos.

Absolutely Beautiful!

Hi Katrina! I just recently found your videos and I really love how informative and generous you are sharing what you know. I have seen a couple of videos where cotton was successfully sublimated. One is by the dye press lady where she put a thin silicone mat inside the tshirt before spraying the poly-t and that protected the back of the tshirt really well. Also you need one of those continuous spray bottles for an even distribution of the poly-t. I've seen another video where a rolling brayer was used to press the poly-t into the fibers of the tshirt after spraying. I hope these tips can help if you ever decide to try sublimating on cotton again.

Try putting a piece of card board in between shirt to keep other side from going through

Thanks for doing all research and sharing

This is a video on what not to do🤣🤣 Thank you for these videos because I know we all learn from our mistakes and I can learn from yours. No Shade though. I'm trying to start Sublimating and I like your teaching strategies.

great video, i had these issues also but i stopped using my press to get the moisture out and started letting the shirts completely air dry , takes several hours unless u put it under a fan but i got better results using this type spray when i let my shirts air dry before pressing them

Wow that was interesting, you handled it well sis

I'm so glad I saw this because I definitely needed to know this

I love your video's

You should use parchment paper & only use the same side down on your press to avoid sticking

I think it looked pretty good the second time around

Thank you for sharing.... can i tell you something probably will help if you sprayed both sides before doing sublimation than you do your design 🤷‍♀️

Hi Katrina, I really like your shirt design hhhh. It distracted me and thank you for the tutorial. I am freshly new to subli so is my learning mode now. thanks

I have printed with the same materials and the same sublimation spray but the result is very fade. Am I doing something wrong or is the print method not good enough?

Great video thank you for making it. Why not turn the heat press down and spray the shirts and then pre press them then turn the heat press up and then press the shirts with the sublimation?

use a PAD between the shirt when pressing,, it will help also to keep the pressure off the seams.

I have tried this and really love the results, but after one washing the image is drastically faded. I wash cold water and basically let it air dry. Is there any solution you can spray on afterwards to keep the image from fading so much? or is there another trick of the trade? thanks!!

Maybe cover the heat press pad with a towel or other cloth. The pad gets really hot, the spray wets makes the paper moist and probably stains the pad because of the heat.

Awesome tutorial 👌

Sometimes you can spray peroxide on the scorched section before you spray with sublimate, and it should come out.

Question ~ Where did you get the amazing ''T" ruler? I love it!!!

Good video thanks I would never use a spray for cotton

Excellent video. Thank you.

Hello do you do one on one because just converted my new Epson 7210 by watching you but my color is not coming out like yours I also use the same paper you used the same ink everything you have I have but it’s not looking nothing like this . I need help can you please help I spend so much money on everything .

Hey Katrina , blessings.. In your opinion do you think the spray is better than siser sheets? Also, is there a 15”x15” clamp press you recommend? Thank you

Love your channel, it has help me alot.

Can you make a video setting up the cutting machine I just ordered and can not work it at all...smh

Nice! I wanted to see the whole family with the shirts on. Lol.

I have seen where some companies use a roller to spread it once you put the spray on before pressing it. Not sure of the effectiveness but just an idea.

How did you do the back with the vinyl?

Can you please tell me what kind of brown paper is that

You may want to try an angled paint brush to work your spray into the fabric.....

Where do you get your shirts from? I am torn between which to buy? I like to feel my products and cut do that when buying online..

Hi Katrina. Thanks for the great video & for being so honest and transparent. I love the name of your channel too. I am a newbie here still in the learning stage. I have tried sublimating on 100% cotton tees, but they fade upon badly upon laundering. I tried 400 degrees F for 60 secs as most recommend, but burnt a hole right thu the shirt. I am now going to try lowering the temp to 385 degrees F. Also, when de-sizing with the 50/50 peroxide solution, how long do I press it for ? Any other advice would be most appreciated. God bless !

I appreciate the miss-haps thank you for sharing

Using the cardboard in between like you’re bleaching might be a better option to protect each side while spraying and pressing

You might want to cover the bottom platen with latex cover sheett!

Sorry by the way I’m so new to this. And I love the way you work especially u show your mistakes where it’s good to see what happens when making a mistake Keep up the great work and I’m watching your videos to learn Blessings queen

Hello, I have a question.. Do you know if I can use a Epson Ecotank ET-2850 to do regular Heat Transfer on cotton garments

Hey ma'am, how do you make the images go to the full paper size??? I have the epson wf 7720 and even when I use the 8.5x11 inc sheets. What am I doing wrong???

Great job, where did you get that centering ruler from?

I would treat all shirts before I press image there I can change the temperature once

Maybe a small paint roller to even spread the spray on the shirt.

What's the name of the spray? I purchased some on Amazon and it doesn't work.

Definitely love be the content also always showing the specifics and do’s and don’ts. No one shows you hands on appreciate it sexy woman😍🙏🏽

Do I really have to use a cricuit or a cameo? What happens if I don’t cut my paper ?

Thanks 🙏🏾 so much ❤

If you use the PolyTplus you will not get the yellowing. This stuff is amazing!

Did you add water in the solution ?

Hello Katrina, I watch you all the time and have learn a lot, but can you tell me where you get your images from?

Hello Miss :)......may i ask have you tried sublimation on cotton tshirt without using any "hack"? (white cotton)

Do you need a specific Epson printer because I have one that takes ink cartridges but idk if I can use it for that?

Maybe put a heat press mat between the shirt so it wont burn

The red color looks good. What print settings are you using? I can't get my red to print correctly.

where did you buy your great ruler for tshirts?

Love your channel, it has help me alot. Where did you get your t ruler from please

I wonder if you could press the front and back at the same time?

Would you use this method on shirts that you sell? Thanks

Hello! New, just subscribed today;) I like that you showed the shirt that got messed up, that was really helpful! Could you spray both sides of the shirt and then press it once?

Peroxide sprayed on the scorched area and set in sun...will take the scorch out

Will it work on 00% cotton

Saw on other video where someone took a paint roller brush and spread the spray out alittle to a more even coverage

Could you use a brush to apply the subli spray to the needed area?

What type of paper is that?

What did you you to fix not getting a line that you said one of them had

Where did U get the drawers Your printer was sitting on? Tfs I always learn so much from your videos.

note i used this spray on my material and it stained my material yellow and did not come out

Thank you for your honestly! This looks like suffering to be honest! I feel like Sublimation on a Cotton fabric is a struggle 🤦🏽‍♀️

What’s in the bottle

I Love Your Work, Do you do one on one mentoring?

Where did you get that ruler?

Can you treat all the shirts first and then do the sublimation on all the shirts?

is butcher paper similar to copy paper

What shirt brand do you use? Does it fade after washing? Can you please link the spray?

Sorry... didn't wait to ask that question

Wat about dark cotton shirts

I njoy this like the font and cannot get your IG name