10 Essential Woodworking Joints You Need to Know

10 Essential Woodworking Joints You Need to Know - The Best Joints of the Week

Рет қаралды 251,486

Күн бұрын

*Support What we do at KMTools.com
Discover the top 10 essential woodworking joints you need right now in our compilation video of the best joints of the week! From inlay techniques to creating strong splines, from interesting dovetails to center keyed box joints we've got you covered. Watch and let us know which one is your favorite in the comments below. Don't forget to subscribe for more woodworking tips and tricks!
Let me know what you’d like to see next! Please like, comment and subscribe.
----
Support what we do at KMTools.com
The Katz-Moses Woodworkers with Disabilities Fund ABOUT kmtools.com/pages/kmww-charity
----
*Check out OUR BRAND NEW STORE for tons of great TOOLS and Support the Katz-Moses Woodworkers with Disabilities Fund*: www.KMTools.com
----
Timestamps
Intro - Why we Practice Joinery it 0:00
Inlaid Mitered Splined Dovetail 0:26
A Comprehensive Guide to Cutting Dovetails 11:49
Houndstooth Dovetail 36:57
Japanese Castle Shiro Joint 50:36
Wedged Mortise and Tenon 1:02:58
Bridle Joint 1:14:37
Half Blind Dovetail 1:23:02
3 Way Locking Miter Kane Tsugi 1:40:53
Absolutely Perfect Miter Joints 1:55:50
Tusked Mortise and Tenon 2:13:49
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA

Пікірлер: 70

@katzmosestools 3 ай бұрын

*Get The Tools from this video and support what we do at* KMTools.com *The Katz-Moses Woodworkers with Disabilities Fund ABOUT* kmtools.com/pages/kmww-charity *Timestamps* Intro - Why we Practice Joinery it 0:00 Inlaid Mitered Splined Dovetail 0:26 A Comprehensive Guide to Cutting Dovetails 11:49 Houndstooth Dovetail 36:57 Japanese Castle Shiro Joint 50:36 Wedged Mortise and Tenon 1:02:58 Bridle Joint 1:14:37 Half Blind Dovetail 1:23:02 3 Way Locking Miter Kane Tsugi 1:40:53 Absolutely Perfect Miter Joints 1:55:50 Tusked Mortise and Tenon 2:13:49

@TheLonelyRunescape 3 ай бұрын

Jonathan these videos are so great I've been fascinated watching so many of them at work

@tobeforgottenisworsethande8995 3 ай бұрын

Lucky. You got to make a career out of doing something you love. Whenever I'm messing around in my shit woodworking or trying to fix something or doing whatever, All I get is hate from people saying I'm just wasting my time I need to focus on work. Basically if you're not getting paid to do something everyone acts like you're being childish if you have interest in it. I have ADD and stuff like this stimulates my mind man 👍

@redcloud9700 3 ай бұрын

I totally relate to your comment! As I’ve grown older, and hopefully wiser, my perspective on hobbies like this have changed. I think woodworking is a wonderful mentally stimulating hobby. It challenges your problem solving, mechanical aptitude, creativity and some executive functioning skills. I think the woodworking community is pretty supportive as well. Hope you’re sticking with it and don’t let the naysayers impede your path. You already know more about what you need out of life than they do. :)

@colinchesbrough5772 3 ай бұрын

Not only is it NOT a waste of time, it's an opportunity to make money once your work reaches a certain skill level, and regardless of if you sell a piece or not, you have left behind something physically tangible. Your "hobby" has created a lasting treasure for friends and family to enjoy

@oldsoul5263 3 ай бұрын

I've been in your situation and wasted so many years having to listen to people say the same to me. If you can get away from those toxic people... PLEASE DO SO!!! As long as tinkering with different hobbies isn't starving you financial responsibilities.... the he|| with everyone else running their mouth. You might actually learn something useful along the way. Study the processes and the people that are good at it and keep tinkering at it... be happy!!! You only have 1 life... enjoy it the most you can.

@calisurfer619 3 ай бұрын

There will always be haters no matter what you're doing. If you're enjoying it and aren't hurting anyone else, it's most definitely NOT a waste of time, no matter what the quality of the work is

@todayicelebrateme 2 ай бұрын

I love paper crafting! Really anything with my hands. It takes me away and helps my mental. Some think it's not o.k. for me to put time and money into my craft. But they are the Same ones asking me for things! I started saying, you should be grateful for my crafts. They save people like you daily! My money my time! Not yours Do what makes your heart happy and your mind calm! I wish you all the happiness in doing what YOU LOVE!

@kevincinnamontoast3669 3 ай бұрын

The roofing nails driven in @ random angles joint is my fave.

@williamshaffer2562 3 ай бұрын

JKM, another informational video. Enjoy watching them.

@dannyerb10 24 күн бұрын

A minute ago someone sent me a “furniture how to video” from a “DIY Influencer”At first glance it didn’t add up, then looked deeper and it quickly became obvious that the whole thing is faked, the guy doesn’t actually build anything himself, but rather someone exploring a niche to build a rather successful instagram following. I took a deep breath and remembered nothing good comes from arguing with people on the internet. Instead decided to come here. Just wanted to say thank you for all the excellent videos you’ve made over the years. They’ve been truly helpful in developing my craft as a fabricator/ woodworker which has brought be a lot of happiness. I’m sure countless people here could say the same.

@seppepylyser3969 3 ай бұрын

“Do a butt joint you knuckle head” Thank you for this video! The tip about the wedge for the mortis and tenon joint is very helpfull! Greatings!

@katzmosestools 3 ай бұрын

Yes!! Someone made it haha

@24.k.g.f.97 3 ай бұрын

That does look frickin cool.

@tutunuitekanawa3940 2 ай бұрын

Amazing work!

@danielu1763 3 ай бұрын

Suweeet! You gotta make a box out of it, you gotta make a box!

@todayicelebrateme 2 ай бұрын

That is beautiful!

@kennethleitner1337 3 ай бұрын

Watching the first joint only (time limits right now), brought back a thought (maybe appears in a later part of the KZfaq video?) I had when I first saw this video: lace wood splines cut at the midpoint of each dovetail!

@dpmeyer4867 3 ай бұрын

thanks

@PaleRider559 6 күн бұрын

Have you ever tried to make a block, on the corner piece, and do 2 dovetails at 90s, from the corner?

@northve25 3 ай бұрын

I’m inspired with your skills and they make me a better craftsman. However, I love your music selections. Sincerely, Tar Baby Against the Grain Fine Furniture Works

@TomDanaher 3 ай бұрын

I posted a picture of a curved dovetail on your FB page hoping you may try that one. I love all the JotW videos.

@PandorusFightStick 2 ай бұрын

all the missing is the bit bang gaming shuirken pcb to change omron switches. i have 4lbs spring 2mm over sized actuator, with omron 400g switches and feels amazing but may have to add otto kit

@ReRoy8 3 ай бұрын

Great way to spend a few hours.

@matthewhill8032 Ай бұрын

I've always seen tusked mortise and tenon with a slight bevel to the mortis and a matching bevel on the wedge (to tightly pull things together with the wedging force). Is this angled mortise and wedge the same thing, or is it technically a different joinery technique/style all together? Thanks, I just learned to cut the wedged mortis and tenon from an old book, but this straight angle looks a heck of a lot easier to get right than a 7-degree bevel on the inside of one wall of a mortis.

@floridabeardedwoodworker 3 ай бұрын

How about a video of all the tools you’ll need to get started using hand tools for these joints

@nudger44 3 ай бұрын

Hi what lacquer do you use for your wood tks bob. Great video

@katzmosestools 3 ай бұрын

I use spray lacquer from Daft

@ravenheart1439 3 ай бұрын

That miter dovetail joint I would think it would be fine once glued an such, i mean how much strength do you need on a draw or box that size know what I mean..prolly never fail...sure looks great though...

@fatroberto3012 2 ай бұрын

Unless I have completely misunderstood joints, the purpose of a dovetail is to make a joint which is very strong in one direction, even without glue. So it is used, for example, to attach the front of a drawer to the sides. No matter how hard you pull the drawer, the front cannot possibly pull off. Using it on a box seems pointless. It just becomes a decoration.

@Kerimpala1964 3 ай бұрын

Bob Marley should be so lucky Mon! Dem joints be tasty 🇯🇲

@troyqueen9503 3 ай бұрын

No one lost a finger making those kind of joints, just time.

@jeremyclaybaugh8790 3 ай бұрын

I was looking in your shop. So many sold out tools. Are they going to be restocked at some point?

@american_patriot6218 3 ай бұрын

How about a JKM inlaid impossible joint?

@calebplumleeoutdoors Ай бұрын

Was the first one a troll? That ebony addition didn't really reinforce the miter... it added a tiny bit of extra glue surface, but nothing additional beyond that in the direction of an expected failure ??

@FrankTheTank417 3 ай бұрын

First! Love ya Katz!

@katzmosestools 3 ай бұрын

Second!

@Mark_L 2 ай бұрын

So strong joinery is not always needed. Decorative joints for a small keepsake box is an example.

@todayicelebrateme 2 ай бұрын

Your video just popped up on my string! I love wood working! Just not talented enough to create in wood

@snteevveetns 3 ай бұрын

Seems like the bridal joint setup could work for the wedge tenant… just would need to cut the shoulder…

@steveh7866 3 ай бұрын

The exercise is dovetailing: why on earth didn't you you use a secret mitred dovetail instead of a mitre?

@jerrybyrd7778 3 ай бұрын

Do a butt joint. I watched the whole video, great tips on a lot of different things.

@katzmosestools 3 ай бұрын

Hahaha yes! Great job my friend

@TimEngle 3 ай бұрын

This guy reminds me of Jimmy Kimmel.

@CaseyTheDuderino 2 ай бұрын

His voice is extremely similar

@gunchuk5653 3 ай бұрын

You look like Jimmy Kimmels long lost brother! Except you're actually talented.

@LessTalkMoreDelicious 3 ай бұрын

Hi Mr. Katz Moses. Would you like to send me a dovetail jig, in exchange for an unboxing and quick test vid of it? ✨🎥

@readeral 3 ай бұрын

I admire your gonads.

@andreashagendorf8454 3 ай бұрын

Nahh, never undercut your Dovetails, if you're planing the outside later on, gaps will start to show.

@tobeforgottenisworsethande8995 3 ай бұрын

@MadAtMax.300Blackout 2 ай бұрын

The successful folk learn how to deal with that and pursue what they're good/impassioned at anyhow.