KAWZSAKI NINJA 400 2018 - 2023 CHAIN AND SPROCKET UP GRADE (VORTEX POWER!!)

No video

KAWZSAKI NINJA 400 2018 - 2023 CHAIN AND SPROCKET UP GRADE (VORTEX POWER!!)

Рет қаралды 23,507

JJMAX2007

4 жыл бұрын

Today we are changing out these OEM steel sprockets for a alloy sprocket set and a O-ring stype chain for a non o-ring chain from E.K.
The Non O-ring chain helps with keeping the wheel spining after power has been cut to the wheel more rolling time as seen in the vid.
I change out the sprocket cuase you should change them out with the replacement of the chain anyway so why not go with alloy sprockets.
there is a great weight difference with the sprockets replacement the non O-ring chain dose require a little more love than the O-ring stype chain but the Gold just looks good on the bike and i don't mind the maintnace of the chain before or when i Ride.
LINKS:
CHAIN; www.revzilla.c...
SPROCKET; (REAR) www.revzilla.c...
(FRONT) www.revzilla.c...
Please Like, Comment, and Sub if you enjoy the video
Want to donate?
PayPal.com = bombstar116@yahoo.com
Cash app = $JJMAX2007
Reach me at: JJAKASMOKIE@GMAIL.COM
Thanks for watching...

Пікірлер: 62

@uncoveringthemysteriesofli2021 3 жыл бұрын

Even though this video is old, just wanted to give a big thank you for this video! I put a 14 and 39 on mines and this video helped me a lot with everything. I used a different master-link though... Also don’t sweat the fact that you put it on wrong. It happened to me on my first one and I even cut the chain too short lol so I had to buy another one and redo it. Things happen but the experience you gain from working on your own bike will last forever!

@jjmax2007 3 жыл бұрын

Oh wow so true and thanks for thw support and kind words this means alot trying to get the bike done on my own and this many eye can easily see mistakes I make but once the video is up its kinda hard to take down the video re shoot whole thing with one hand and remember where I messed up fix it and then edit new video...... just... had to get better with later videos Cheers

@timothyprinsloo2852 3 жыл бұрын

Looking at doing something like this why not break the chain when taking it off using a chain breaker tool? then no need to remove the rear set

@jjmax2007 3 жыл бұрын

I plan to put the old o ring chain back someday and breaking it i would have to buy another

@ridingwithmic4177 2 жыл бұрын

@@jjmax2007 all you would have to do is get a new master link

@Motoplugg Жыл бұрын

Couldn’t you have just popped the master link out instead of taking the rear set off?

@jjmax2007 Жыл бұрын

yes yes i didn't not know that when i was working or making this video if you look at my newer videos that are much much better quality cheers

@OnlyTheReal_RPM 2 ай бұрын

If it’s riveted, you still have to cut it like there’s no master link on a stock bike. It’s riveted. Good luck finding that.

@jonruiz6458 3 жыл бұрын

Nice , that new chain spins a lot more free how did it help or change your bikes speed, and why did you say in the comments you where gunna take it off?

@jjmax2007 3 жыл бұрын

I taking it off cause of maintenance was crazy for the type of riding I do..... sometine I go for long rides and half way the chain get so hot and noise did want to have to rise around with oil in my pocket or back pack smh it dose make a difference over stock for sure tho

@jonruiz6458 3 жыл бұрын

@@jjmax2007 damn that sucks lol well good feedback good thing ima just keep mine stick them

@jjmax2007 3 жыл бұрын

Niiiiice

@shiv.seeking 2 жыл бұрын

Nice and thorough thank you sir

@jjmax2007 2 жыл бұрын

Awesome.....

@CarlosHernandez-kn4xk 4 жыл бұрын

Good vid bro

@jjmax2007 4 жыл бұрын

Hey thanks means alot

@davidespinosa4367 3 жыл бұрын

How much faster did the bike go? And we're did you buy the sprockets at??

@jjmax2007 3 жыл бұрын

Link in description. Top speed the same getting there much faster

@jesussamuels325 3 жыл бұрын

Did you run into the problem of the check engine light and gear indicator not working?

@jjmax2007 3 жыл бұрын

No no not at all... not sure what you mean tho there is no wiring in what I did 🤔

@ghosted_whipz6000 3 жыл бұрын

Did u ever figure out the problem?

@ahmedyoussef7931 4 жыл бұрын

Have you noticed the difference when you took it out on the highway?

@jjmax2007 4 жыл бұрын

Yea yea right away the acceleration is 7x faster what a big difference and so much easy to get to top speed and hold it after fuel cut

@holybutterfly8495 3 жыл бұрын

@@jjmax2007 How did you take it out the old chain when it’s stuck in the motorcycle stand then ?!!!

@DYNOZUKI750 3 жыл бұрын

Hey boss you never followed up on this, how did the chain do?

@jjmax2007 3 жыл бұрын

Hey sorry bout that I sold the bike in too short of a time to get a feel for the difference

@bernardwitczak 2 жыл бұрын

The chain of course must be gold :))

@jjmax2007 2 жыл бұрын

Oh yea 😎

@javierc2726 2 жыл бұрын

Why you film the video inverted? Try editing it

@jjmax2007 2 жыл бұрын

This is true... believe it or not it was edited if not the whole thing would be upside down..... Cheers

@Ark86125 4 жыл бұрын

I also have ninja400 i leave in israel we have here crazy prices for bikes. So i could afford myself only ninja400 for 11000$ so i want ask question. What will make my bike go faster? Did this sprocket change gives spmething? Maybe change size of the sprockets how its affect the bike? Fuel adjustment, full system exhaust how much power will grow?

@jjmax2007 4 жыл бұрын

Umm no the sprocket change was to make the acceleration better. Yes the small the top speed you go the bigger for me the faster you get to 0 - 60 lol there is a change to fuel cause at high way speeds you would be doing of 60 you would be doing 95 depending on the bigger you go but if you go small then it takes longer to get to 60 mph.... the exhaust dose at hp I just never got the chance to dyno the bike after I installed the exhaust.. If you want to see the type of exhaust I installed check out my playlist on my channel for the ninja 400 and other bikes

@Ark86125 4 жыл бұрын

@@jjmax2007 is it posible to put in front sprocket a little big bigger?as i understand if you change the rear to biger it will afect max speed and slower the accelerration. As i understand its not problem to install full system exgaust. Power comander and open air filter problem its transfer it to the wheel to get actual power

@jjmax2007 4 жыл бұрын

Oh ok umm the front sprocket I never got around to and have not done it I'm not

@88Heckenlively 3 жыл бұрын

Master link clip is in the wrong direction. That's basic motorcycle 101 stuff. Also, you didn't change the gearing? For real acceleration and anti-gyroscopic performance gains the 415 chain conversion is the way to go + 4 lbs lighter! Your rear wheel will spin for days like a GP bike. Spears and Norton Racing show the gains with the dyno. Anyway, I enjoyed your video 👍

@jjmax2007 3 жыл бұрын

Oh awesome thanks for thw heads up

@DYNOZUKI750 3 жыл бұрын

They don’t recommend it for street use though?

@88Heckenlively 3 жыл бұрын

@@DYNOZUKI750 415 conversion not practical for street - mainly for racing or dedicated track bike.

@Motoplugg Жыл бұрын

You’ll have to do a chain adjustment every other day with that setup

@packoswuids9000 4 жыл бұрын

What size chain did you get? How dramatic is the difference

@jjmax2007 4 жыл бұрын

520 sprocket and cbain the chain was o ring less a and the wheel spin was so much... co pared to the chain with the o rings ummm the acceleration with out o ring and maintain high speeds are crazy fast and easy once done

@packoswuids9000 4 жыл бұрын

@@jjmax2007 have you tried or recognized the difference of how easy it easy to get the bike up on one wheel? I'm mostly looking for a stunt build but I definitely like where you went with this one

@jjmax2007 4 жыл бұрын

Ummmm no no i haven't attempted to but with the chain and sprocket change dose make the bike react so different and if a power commander is added on my, my,..... my

@ghosted_whipz6000 3 жыл бұрын

So after changed my front an rear sprocket my engine light came on an my gear indicator is not working any more any one know why ?

@jjmax2007 3 жыл бұрын

Nah nah that is so strange what did u disconnect to remove the sprocket..... like go back over the bike and I'm sure there is something you may have over looked Cheers

@ghosted_whipz6000 3 жыл бұрын

@@jjmax2007 no nothing is disconnected found out it’s a common problem also , mine till work time to time now but will go back to doing the same thing

@jjmax2007 3 жыл бұрын

Oh wooooow

@aj2858 2 жыл бұрын

@@ghosted_whipz6000 Did you fix it? I read that clutch cable wire needs to be jump... I tried to take mine off today but could not get it off, with an impact gun and a breaker bar, left for another day...

@jjmax2007 2 жыл бұрын

Ok sorry this might be delayed but I have a friend that has the 2019 bike his bike is doing the same thing he let me take a look at his bike and I found the shift shift was bent cause he used a impact gun cause he did not have a breaker bar let me ask u did u do the same ?? I had someone hold the rear brake whole the bike was on the ground and broke all the bolts loose before I removed the strokes on the stand.. I look forward to your reply Cheers

@broderp 4 жыл бұрын

If the gears have the same number of teeth as the OEM ones, what have you gained? You saved 1/2 pound of weight and gained about 0.05 hp. I'm not buying the hype, not to mention those parts are soft, meaning willnwearvout faster than the OEM parts. I hope they were cheap to buy...

@jjmax2007 4 жыл бұрын

All true but to add to a combo of other things makes a difference

@bryancrawford5053 26 күн бұрын

Something to consider. The weight difference on a part the engine needs to rotate is different from actual weight savings on non rotational non moving parts.