Kayak Trolling Motor Mount for Cheap! DIY! No Drilling Holes in Kayak

Рет қаралды 27,716

4 жыл бұрын

This Kayak Trolling Motor Mount Setup is Cheap, and Works really good. This is one way of thinking outside the box and testing your kayak out with a trolling motor for under $20 if you already have a trolling mount and battery. It took me less than an hour to put this little Motor mount. I went to Home Depot and picked up 1/4 inch PVC, 2 1/4 inch 90s, 5/16x4inch bolts, nuts, and a 2x4. Those few parts allowed me to put together this little gem of a motor mount and see just how fast this kayak can go and how much nicer it is not having to worry about paddling. Let me know if you have made a trolling motor mount and if it was better or cheaper than this one right here.
Editing Equipment
-------------------------------
Laptop: amzn.to/2HglPd4
Software: Adobe Elements 2018: amzn.to/2HmEr7c:
External Hard Drive: amzn.to/2HT1ZBQ
Camera Equipment
---------------------------------
Action Camera - GoPro Hero 4: amzn.to/2K5Cv51
Action Camera 2 - Go Pro Hero 5 Session: amzn.to/2K6NmeW
Shoulder Strap for GoPro: amzn.to/2Hjh0M7
Camera Tripod: amzn.to/2HkfWvF
SD Card for GoPro: amzn.to/2HjD0KK
External Battery for GoProamzn.to/2F5v5Lp
Rods
---------------------------------
Abu Garcia Casting: amzn.to/2HFs75l
Abu Garcia Spinning: amzn.to/2K6N0VE
Wright Mcgill: amzn.to/2HkdZPR
Kast King: amzn.to/2Hm58Np
Reels
----------------------------------
Abu Garcia Revo SX baitcaster: amzn.to/2K5swMN
Abu Garcia Spinning Reel: amzn.to/2F4xpC5
Cast King Baitcaster: amzn.to/2HlJWmP
the above links are amazon associate links
#underwaterfootage #bassfishing #fishing

Пікірлер: 42

@curtwuollet2912 Жыл бұрын

Putting the force vector that high is an excellent way to roll your kayak.

@TBassFactory Жыл бұрын

Yep your right and I never sit down either. Luckily never took a swim as many trips as I’ve been on.

@TBassFactory 4 жыл бұрын

Let me know if you guys have a trolling motor on your kayak, and what you think about them on kayaks?

@adamcole69 2 жыл бұрын

*I bought this model for my 14 ft Jon boat. **enjoyable.fishing** recommend love it!!! It pushes my boat with ease ( 2 men 220 each). I would highly recommend this to anyone.*

@SirKankus 6 ай бұрын

How the hell did u get that on a jon boat

@TroutMadeAnglerCo 3 жыл бұрын

Thanks! About to make one today!

@TBassFactory 3 жыл бұрын

Your welcome bud, good luck

@stanleyowen3289 3 жыл бұрын

Thanks for this video I'm gonna try this I have a spot that's a long paddle to get to this will make it so much easier

@TBassFactory 3 жыл бұрын

Awesome, I hope it works out bud. Thanks

@billmartin694 3 ай бұрын

Don't use 90s use 45s. Glue straight up and add 8 inch risers. Split your paddle and put them in the 8 inch risers. Mount the 2x4 sitting on your kayak deck which makes your mount solid not sitting a foot off the deck on 2 plastic pipes that you already compromised thier integrity. I used two 1.25 inch aluminum pipes straight out of my rod holders and bolted with 1 bolt which makes them move and slide right in assembled. My bracket is pre-assembled and I slide them in and mount my motor and ready to go in seconds. Hope that helps

@TBassFactory 3 ай бұрын

I Love it! Thank ya Bill!

@SketchingRocks 3 жыл бұрын

great job giving us lots of ideas. One suggestion. Round off both ends of the board and sand them so you dont rip your arm on them the way they sit.

@TBassFactory 3 жыл бұрын

Yeah i was thinking function first, ha. That is for sure I need to do that and round them off. Thanks greg

@KevinRKosar 3 жыл бұрын

Nice! I would bet you could screw/bolt 1 to 4 small cuts of PVC to the baord to create rod holders.

@TBassFactory 3 жыл бұрын

I could totally see you being able to do that. That would be a cool add on. Good idea kevin

@bitenbass 4 жыл бұрын

Bro great idea

@TBassFactory 4 жыл бұрын

Thanks bud, and it was Less of than $20 to make

@bitenbass 4 жыл бұрын

@@TBassFactory even better!!

@benmudn 4 жыл бұрын

Some color matching paint and you're ready to go. It's going to be interesting to see what goes up in smoke first when you max out the volts on your trolling motor. Switch, wires or motor?

@TBassFactory 4 жыл бұрын

Yep, it needs some paint. I'll probably take a 101 thrust lower and screw it on to the shaft and make it 36 volt. Ha

@danuellewalker8587 4 жыл бұрын

Woop woop. Yes Sir. I needed this

@TBassFactory 4 жыл бұрын

It's easy to make, cheap and works

@danuellewalker8587 4 жыл бұрын

@@TBassFactory I have everything I need except the trolling motor and battery. I'm sure I can make the eyes at the hubby and have it tomorrow. Lol. Thank so much for putting out awesome content. You remind me MacGyver.

@TBassFactory 4 жыл бұрын

I love your comment, sounds like my wife when she hands me a honey do list. I appreciate the macgyver comparison, my brain works a little different than others I think. Too many ideas I need to get out. Thanks danuelle

@theRickyBanana Жыл бұрын

Just picked up a used pelican catch120 and for some reason it's pretty difficult to find a mount. It looks like you have the same model and it seems pretty simple to build. I have a few questions though, why do you need the 90 degree elbows, why not just straight into the pvc? Why does the pvc need to extend so far up and above the kayak? I think the hole was 9in but why not just mount the 2x4 right above the top of the kayak so the wood can rest on the kayak itself? I'm worried about flex in the pvc as my 55lb trolling motor I got used is really heavy (maybe overkill)? I'm new to all this never had a motor or anything. Thanks!

@TBassFactory Жыл бұрын

I used the 90 because it allows you to line up the bolt holes with the transom board. If you use straight the board will be at an angle. I had a little flex and I put a rope on it and attached a carabiner and clip to the Carey handle on mine and keeps it from flexing with the weight. I hope that helps bud

@noahway13 4 жыл бұрын

What determines placement? Front, back, or side?

@TBassFactory 4 жыл бұрын

I would have to say weight placement and preference or you can try out different placements and whatever you like best. I set mine up how I had imagined and just went with it.

@Kamkieng 4 жыл бұрын

I have a question, if you you put trolling motor on kayak do you have to register for it?

@TBassFactory 4 жыл бұрын

Yes, by law if you have a trolling motor on any watercraft you have to register it. It isn't hard to do, I have registered kayaks and they just need a couple things and it's usually under $50.

@Kamkieng 4 жыл бұрын

@@TBassFactory do you have to go to DMV or you can apply it online? Please if you have any information of register kayak trolling motor let know, my state was North Carolina help me out if you dont mind 😅😅

@TBassFactory 4 жыл бұрын

If you click on this link it should take you where you need to go to register bud. Hope that helps. www.ncwildlife.org/boating/registration-titling

@SproozGooz 4 жыл бұрын

lets see it on the water!

@TBassFactory 4 жыл бұрын

Video just released at 4pm. Thanks bud

@olsoutdoors1757 4 жыл бұрын

What size pvc did you use ? Great vid 👍Cheers

@TBassFactory 4 жыл бұрын

I believe it was 1.5 inch and it fit perfectly for my rod holders after I made a relief cut, but I've noticed that some other rod holders can be different sized so just make sure and measure unless you have a pelican catch. Hope that helps bud