I've been using this machine since it first came out. I've done many DTF transfers with it and they come out great. I love this machine!

I love my HTV Ront I have never had an issue with sublimation or DTF. Used it many times.

I bought mine and opened it up a week ago, going to be using it for the first time so this video was great. Mine did have a piece of the plastic broken on the very front left side of the drawer slide which doesn't effect the workings of it but was really disappointing when I opened it up as the two boxes that it was inside of weren't damaged at all so I'm guessing it happened in the warehouse. But what I noticed trying to put a T-shirt on their was I could hardly slide the drawer in? I haven't turned it on yet but I hope it lifts up a little bit when I turn it on so I can do thicker items like sweatshirts. Update works great and as soon as I turned it on it lifted up but I had to replace the mat after about twenty presses as it wrinkled badly.

DTF transfers are not a problem. I’ve literally done dozens of them with this press and it’s perfect every time.

I literally just unboxed my heat press and I can’t wait to get started.

Thanks for the review! The machine is so cool!

I love this auto heat press machine！It’s really convenient to operate！

Really like the machine! It's really a good helper when doing crafts!

Great review looks nice and easy to operate.

Love It! Definitely want one!

I just got mine last week and I LOVE it compared to the offbrand one I was using.

I JUST ORDERED MINE, IT SHOULD BE HERE BY OCT 2ND. HOPEFULLY BEFORE THAT DAY. I WAS HURT ON THE JOB SO I CAN'T PULL DOWN ON MY MAIN HEAT PRESS, 16X20. THIS WILL WORK AS A BACK UP.

I can’t wait to purchase mines I need something like this❤❤❤❤

So Lucky! I'd love to get that press from HTVRONT! That auto heat press looks so cool!

HTVRONT auto tumbler heat press！Dream to have it😆

What printer and paper do you use to print the graphics? Is it a special printer? I'm new to this.

I bought this autopress last year and I absolutely love it.

Hello. Thank you for this awesome tutorial and great comments. Can anyone tell me if this heat press can work on corrugated cardboard boxes? Thank you

I just ordered this htvront. Excited to try it. Where did you get you tAble that u have your presses on?

Enjoyed your review. At this point which one of your heat presses do you use the most? Your Htvront or manual clamshell?

Great video, thank you. Have you tried making a sweatshirt on this?

I found this on Amazon last year and bought it. It works great and I love it. I highly recommend it. Makes it so much more fun to craft and use the iron on vinyl..

We loved this press when we first received it in January 2023. We only use it moderately (less than 6 items pressed per use per month). Now it is August 2023 and it will not close. It heats up perfectly but when we try to press it closes and pops right back open and the controls start blinking. It has also started making a grinding noise. I contacted warranty support as the press is under warranty, they responded requesting videos of the problems, we emailed videos back, they responded with they couldn't open the videos (they are too stupid to download them and use a player to view them), we uploaded the videos to our you tube channel (cause everyone has one of those) and sent them the links....There response was to give them significant time to troubleshoot the problem and they would get back to me. I’m sure enough time for my warranty to expire. I asked them point blank to honor their warranty and replace the press…Crickets!!!! Others here have complained about these same issues in the reviews. THEY WILL NOT HONOR THEIR WARRANTY!!! I'll update this review if something changes.

What printer do you use as well as paper for regular graphic to put on shirts

may i ask what printer you use for sublimation? ALso, any tips. mine never look that vibrant.

I just got my new heat press today and used it it was pretty easy to do however when I was done using it the numbers in the little screen all went off but the start light keeps flashing does it never stop when it’s turned off how do I know when it’s actually off and I’m done for the day

I just got my heat press, but whenever it lifts up after the press, I find that it's quite shakey. I'm not sure if this is normal or mine is defective.

Great video ..

What type of paper and printer did you use to print your design for the sublimation?

Did you do a video review of the hpn Mpress?

Hey can anyone tell me, does this machine prints for the glass as well? Like can we use these prints on glass? Please help!!

Hi hello, the latest i know is for dtf printing we still need to spread dtf powder and after that we send the paper to oven to "cook" the printing. After this two step we can heat press the material. If im not mistaken , i dont see those two steps in your video. So with this technology we can skip the powder and "cooking" process? Please advice. Cheers from Indonesia 😊

Kayla, I have a question. Why does my HTVRONT auto Press on off light keep blinking? I’m sure I’m doing something wrong to trigger this problem.

I wonder if you can use it for hoodies

I love this machine with the exception that you can't turn it off. The light will continue to blink once you turn it on the very first time. If someone discovers a way to turn the blinking light off please post it so everyone will know. The machine is great other than that!!!

What do I need to print out my designs to print on t shirts? Is there a specific software ? Thanks

Can you use iron on vinyl with this as well??

Do they come with a mat already or do I have to purchase

What machine do you use to print your sublimation?

They came out beautifully

how do I get a temperature cheat sheet; I want to use htvront to subliminate metal business cards

Where did you get your table?

Where do you get your shirts from?

Kayla what table are you using? I love it! I have this heat press and it’s worked super well for me

What kind of shirt are you using?

Does those numbers always blink? Is that normal?

Is it a three prong or two prong plug for USA version? Heard some people hurt some people ordered this and got a 2-prong plug when we normally get 3-prong plugs for heat pressers

Call you use it for hoodies ???

i just got my HTV Ront autopress. i most likely use it for sublimation. just wondering where did you get the sublimation t-shirt it seem a good quality .

Your coupon code isn’t working 😢

I tried to buy it. Spent almost $300 and it was supposedly delivered today. What was delivered was a 5x5 package with a vinyl collector weeding tool using same tracking number as the heat press. Unfortunately after 4 emails, still no response from the company.

What is your printer?

I bought this machine a few months ago. Within a day of using it, the machine kept beeping and the timer stopped counting down. I tried contacting the company via email twice and also by phone and never received a response. Fortunately, I purchased it through Amazon and I was within my 30 return period so I did return it. I read about another individual that had a problem with his machine and also could not get a response from the company so he was out of luck. I would rather spend a little more on a machine and have great customer service and support.

hi im a fan of your work.. can you tell me what software you are using for your designs please

Is there a trick to shutting it off? My light continues blinking and I have to unplug each time.

Is it OK to leave the auto press plugged in, or is it best to unplug it when not in use?

The only issue I see with this press is some htv needs more pressure, is there any adjustment for this?

How do you do the sublimation transfers? Is there a certain kind of transfer that you print the design on for it to do this? If that’s the case, do you need a particular kind of printer? I have an HP Inkjet but wasn’t sure if that would work at all.

Do you have to do the shirt backwards?

I just set mine up today :) waiting to use it. But I am trying to find out why the power light keeps blinking when it’s not on? Can anyone tell me? I cannot find the answer and will it close again?

Where did You buy your table? ❤

What it's the settings for this project. Thanks

Has anyone tried puff vinyl on this machine? Wondering if it has enough pressure for puff!!

Promo SM 👌

They lost a customer when you said you have to flip it upside down. I won’t purchase it now.