KC Tool Haul, Wera Chisel Drivers & Tool Pouch, Halder Mallets!
Рет қаралды 9,881
Күн бұрынHard to find something much more fun to unbox than another box from KC Tool! This time I ordered the Wera Tool Quiver as I wanted a small tool pouch I could easily toss a couple things in to tackle a specific job on a building or home instead of bringing in an entire veto bag. I also noticed KC Tool had the Wera chisel driver set on tool of the day so I just had to grab another set of those as they're some of the most used drivers on my truck. I also purchased a couple Halder mallets to try out as they were recommended to me by one of my awesome subscribers here.
Purchased with our own money & NOT SPONSORED! Just love the products.
Check out our new website and get stickers at www.millisconstruction.tv !!
Follow us on Instagram @millis_construction
As an Amazon and KC Tool Affiliate, These Links are Affiliate Links and we will earn a small commission by you using them at no additional cost to you! Thank you for supporting our channel!
Wera Tool Quiver: amzn.to/3nn2UBb (Amazon Affiliate Link)
Wera Chisel Drivers: amzn.to/3z78slr (Amazon Affiliate Link)
Halder Baseplex Mallet: amzn.to/2YMxha5 (Amazon Affiliate Link)
Halder Simplex Mallet: amzn.to/3z4VogB (Amazon Affiliate Link)
America's Number 1 German Tool Distributor! KC Tool
This is where you can get the Zyklop Sets etc, Amazon is iffy on which ones they have and from which sellers unfortunately. Enjoy exploring! They have an incredible site! Be sure to check and see what they have on "Tool of the Day" too!
Get your Knipex, Wera, Wiha, Stabila etc here: www.kctoolco.c... (KC Tool Affiliate)
Camera Gear Used On My Channel:
Sony ZV-1 Camera: amzn.to/34a4o83 (Amazon Affiliate Link)
Rode Videomic NTG Shotgun Mic Bundle: amzn.to/356ec22 (Amazon Affiliate Link)
MannFrotto Pixie Evo Tripod: amzn.to/31iMjmr (Amazon Affiliate Link)
Rode Wireless Go System for a Lavalier or Boomed Mic
Canon M50 MK II Camera with Kit Lens: amzn.to/3CYOX1T (Amazon Affiliate Link)
Lighting:
Aputure 120d MK2: amzn.to/2VaTz3s (Amazon Affiliate Link)
Aputure Light Dome 2: amzn.to/3BRGJrU (Amazon Affiliate Link)
Aputure MC RGB Light: amzn.to/3i8hbP7 (Amazon Affiliate Link)
Music and Sound Effects are Licensed for our use from Epidemic Sound
Disclaimer, all or some of the links in this description are affiliate links and we will earn a small commission if you use them.
#wera #halder #unboxing
@MillisConstruction 2 жыл бұрын
Check out another awesome KC Tool Unboxing! kzfaq.info/get/bejne/eMiUiMh_q7bae3k.html Hit that like and subscribe so you dont miss any upcoming videos! What new tools did you add this week?
@RenovationsandRepair 2 жыл бұрын
I love it when I buy stickers and they throw in free tools!!!!
@MillisConstruction 2 жыл бұрын
It’s the best 😎
@Themobilegearhead 2 жыл бұрын
I like unboxing. Great video.
@pouetance 2 жыл бұрын
I found that the Wera quiver and the others pouches are the perfect internal toolbox dividers :-) It organizes your screwdrivers/pliers neatly in your box and if you need to take them all at once with you, you can do it. Plus, you can put a velcro band on your worktable or ladder.
@Seedthedrummer 2 жыл бұрын
Great idea, agreed. That wera tool pouch would sit nicely inside a Milwaukee packout rolling tool box loaded W drivers & pliers Next to your power tools. 👌
@TechMay 2 жыл бұрын
I definitely love to watch an unboxing !!
@three-phase562 2 жыл бұрын
I haven't purchased many hand tools lately, so always good to see someone else unboxing new essential toys, I mean tools!. For me the Wera 2GO systems doesn't have the same robustness as the Veto MB range, you can utilise the velcro to place the Wera bags onto larger totes etc which is handy.
@joiion913 2 жыл бұрын
I’m a mechanic and use the wera yellow chisel driver flat blade and the black handle wera chisel driver which is HUGE and those two are rock solid! I chisel and pry with them everyday and for the price and comfort they are way better than snapon or mactools. I’ll be buying more in the future just because I love em
@nhsplumber9991 2 жыл бұрын
Another great video. I like the unboxing ones
@weeklyone 2 жыл бұрын
Yes, unboxing! Love it! New subscriber! Greetings from Azusa, California . Cool channel!
@MillisConstruction 2 жыл бұрын
Welcome welcome!!!
@Tooligan2021helloyouTooligans 2 жыл бұрын
Another great Video, thanks for visiting my Channel and commenting 👍
@MillisConstruction 2 жыл бұрын
Thank you too!
@thegloriousretardmagnet4257 2 жыл бұрын
Aaaaaah yes! halder mallets! finally!! (I was the guy from Facebook that wrote to you that you need to check them out btw). they also come with steel (red) and aluminium (silver) heads. if you want something lighter. I got a simplex 40 with aluminium head for example.
@MillisConstruction 2 жыл бұрын
They feel really good! Looking forward to giving them a workout 😁 that was a great suggestion!
@tedmcdonald3377 2 жыл бұрын
Thanks Joseph😎🛠️😎🛠️😎
@fyrfyter55 2 жыл бұрын
I look forward to your unboxing videos. I get to find out about new to me tools and they’re very informative. Great job…keep it up. 👏🏻
@MillisConstruction 2 жыл бұрын
Thanks a lot Kirk!!
@chrisfyfe9212 2 жыл бұрын
Nice review ! The Wera Demo drivers are really nice . I like the little Wera bags . My TPXXL finally arrived !The TPXXL is a great “ walk in bag “ , the small Wera bags look like a great “ Walk around “ bag , for small targeted tasks . I may try the concept for my 1KV insulated tools . I’m totally impressed with the XXL !
@MillisConstruction 2 жыл бұрын
Sweet!!! It’s massive compared to the TP XL isn’t it. Those meter pouches add a lot of width
@ianthornton1642 2 жыл бұрын
Great idea, always enjoy your videos 👍
@skooistra1766 2 жыл бұрын
the last year or so i've been getting more and more of those wera sets. just for the flexibilty it provides. i use the Wera 004354 Wera 2go 5 Tool Carrier and then a Wera 004352 Wera 2go 3 Tool Box one one side and what ever set i need on the other... ready to go. it's Very handy for the maintenance work i do on HVAC and anything electric. i'm never going back to a toolbox/case thats for sure
@MillisConstruction 2 жыл бұрын
Have you used a Veto bag? I’m really curious about the comparisons. I might end up getting the Wera toolbox as I really have enjoyed this quiver over the last week, I actually have had it on the job with me every day since getting it.
@skooistra1766 2 жыл бұрын
@@MillisConstruction I don't think we have those here in the Netherlands (tho i haven't looked specificly for them either) we use Parat cases allot for service techs and those are big and bulky. so with what i use now if i can't fix it reasonably quick with that ... it's gonna be a long day in anycase :)
@lynnemillis9079 2 жыл бұрын
Love your videos Josef!
@MillisConstruction 2 жыл бұрын
Welcome welcome!
@lucasmancini7415 2 жыл бұрын
I picked up a stabila jambler set with the 78in and 25-40in 80t extendable level and finally went for the ets ec 150. Hartville hardware has some in stock and it’s been eating at me to get so I pulled the trigger. Got both this past week so I’m sure you can imagine that was about a weeks worth of goodies lol
@MillisConstruction 2 жыл бұрын
That is right up there with my favorite sander ever to use! So smooth and vibration free. Can’t beat a Stabila set either! What’s next on your list?
@lucasmancini7415 2 жыл бұрын
@@MillisConstruction looking into getting either festool midi or 26 as I’ve found my regular shop vac isn’t the best with the sander. And possibly a rotex. What’s your favorite sand paper?
@MillisConstruction 2 жыл бұрын
@@lucasmancini7415 the Granat is my favorite.
@chrisfyfe9212 2 жыл бұрын
Not that you need any advice on how to spend money , but; I’ll commend another couple of drivers for your attention : The Whia 26 in 1 ( uses double ended 1/4” hex bits ) , and the 14 in one Stubby ( one of my EDC drivers ) . This family of drivers are supported by 13 bit reload packs ( “ Technician “ sku 77781, Tradesman sku 77780, Industrial , sku 77782 , and Security , sku 77782 , plus HVAC , Sku 77784 . Their is also a 26 in 1 , called the “ Multitool “ has metric , Torox , posidrive , metric and Imperial hex etc .sku 77797 . A good 1,2, punch to schlep in your TPXXL !
@MillisConstruction 2 жыл бұрын
I have another PB Swiss order coming possibly tomorrow, I may need to give it a minute lol! I got a bunch of their drivers to try out
@chrisfyfe9212 2 жыл бұрын
@Millis Construction Very cool , PB is good stuff , ditto The Tool Lady ! I’m working on a PB want list ATM .
@15buckeye15 2 жыл бұрын
I really enjoy your videos of tool unboxing and reviews. Especially, your Veto tool bag tours. I was wondering if you have looked at any Diamondback tool belts or accessories to review. I bought the Artisan a year ago and it is fantastic. Thanks again for the videos.
@MillisConstruction 2 жыл бұрын
I’ve never been much on tool belts really, it’s part of why I wear the Blaklader pants so much. All the pockets are super handy and the X1600 versions with the pull out nail bags and things just work perfectly for my style.
@Tooligan2021helloyouTooligans 2 жыл бұрын
Wera 2 go is great I've used it before but Veto is going down really good in the U.K
@MillisConstruction 2 жыл бұрын
Very hard to be better than a Veto 😅
@Tooligan2021helloyouTooligans 2 жыл бұрын
@@MillisConstruction I think Veto is becoming a solid No1 brand In the U.K I have 2 already and the Wera 2 go is just as a back up for other tools 🔧
@guydesnoyers8417 2 жыл бұрын
Love that sweet black and yellow handle color! Have you invested in the Wera ratchet? Zyklop, I believe. I'm still running a Black and decker set I received as a gift. They work, but the mechanisms are wonky... Might be my next Wera adventure!
@MillisConstruction 2 жыл бұрын
I have several of their 1/4”‘ Zyklops and I have their ratchet hammer dealio. I need to get a 3/8” and 1/2” drive set probably.
@Tooligan2021helloyouTooligans 2 жыл бұрын
Wera Zyklop 1/4 inch set is great 👍
@KiltPatrick 2 жыл бұрын
I think it goes without saying, but Mike's Tool Shed found out the little one IS NOT a chisel driver.🤣
@MillisConstruction 2 жыл бұрын
Haha this is true!
@andrewscott8892 2 жыл бұрын
You get double the amount of the screwdrivers you use 1 tenth of the time (at least as a screwdriver)
@savagegentleman3583 2 жыл бұрын
I just received my Stabila levels, a few Knipex Pliers Wrenches and a couple of Bahco Adjustable Wrenches that are reversible to a small pipe wrench. Really nice, but the Bahco wrenches already have a couple of indentions in the jaw blades from nuts. Appear to be well made, but that is concerning.
@MillisConstruction 2 жыл бұрын
I haven’t bought any Bahco wrenches but I know quite a few hvac and plumbing people that really like them. Ive pretty well just gone with Pliers Wrenches and eliminated all my adjustable ones. Ive not been able to dent those 😅
@leonpowers8762 2 жыл бұрын
Will the Wera Quiver bag hold a Fluke volt meter and one more meter about the same size as a Fluke volt meter and have room for 1 extras set of leads? Your response would greatly be appreciated. I thought about ordering one if it will work. I work on rail road Crossings with the signals. Gates & Lights. Thanks for what you do. I bought the wera T handle set that you showed Not sure what it is called. My wife latched on to this set.
@MillisConstruction 2 жыл бұрын
Hey Leon! If you are able to send me a message on Instagram @millis_construction or on Facebook: Millis Construction I’d be happy to put my fluke meters in my bag tomorrow and send you some pictures. The S looking dividers are removable and adjustable so I’m thinking you could just right off hand.
@leonpowers8762 2 жыл бұрын
@@MillisConstruction ok Thanks
@MillisConstruction 2 жыл бұрын
I posted a series of photos of it with my meters on Facebook for you. Hopefully that helps! Just let me know 😁
@ivovantulden3921 2 жыл бұрын
Why not a wera hammer?
@MillisConstruction 2 жыл бұрын
Is there a Wera hammer you like?
@sunnydays1238 2 жыл бұрын
Is the halder simplex a 30 or a 50? The Amazon link is for a 50?
@MillisConstruction 2 жыл бұрын
I’m pretty sure mine is a 30. I might’ve linked the wrong size there 😅
@JoeyRF 2 жыл бұрын
As a working man I can justify the price for some knipex pliers and stuff cause they a really are better than anything else. But as far as screw drivers Klein all day every day. Wera are ok I guess I personally thing the grip sucks. Idk Klein I can get all day every day here locally if I break one I get a new one with a trip to Home Depot
@MillisConstruction 2 жыл бұрын
Nothing wrong with that, we all have our favorites. I noticed you did say “if you break one” I actually have broken 3 Klein drivers and its a big part of why I dont use them anymore. If you like a classic style grip I’m a pretty big fan of PB Swiss too but they’re a bit more expensive for sure. Hope you’re having a good start to the work week 😁
@JoeyRF 2 жыл бұрын
@@MillisConstruction true i have broke a few too but I always keep a extra set in the van. I learned my lesson lol. I just love Klein drivers. I haven’t used the PB Swiss I will have to check them out. I know they make some damn tough Allen wrenches
@chrisfyfe9212 2 жыл бұрын
You Sir are totally bad for my wallet !
@brucelee-tn2mg 11 ай бұрын
Vessel Electric Ball Grip Screwdriver 220USB-1DG Dull Green Limited Edition gruß aus germany würzburg
Millis Construction
Рет қаралды 20 М.
Friendeez
Рет қаралды 15 МЛН
Millis Construction
Рет қаралды 68 М.