@dnichl 4 ай бұрын
if you haven't found it already. those little divets on the blade hold oil and help keep it running smooth longer. been seeing them on more blades lately.
@Wolfiegangs 4 ай бұрын
Did you get the Tpob brushless? How do they compare to the modded Kemei? What's your recommendation for budget clipper and trimmer (aliexpress and nonaliexpress) products?
@elias9551 11 ай бұрын
Do wahl legend guards fit on the kemei 2269 with kemei blade ?
@Chriscutshairuk 11 ай бұрын
Yes, they do. But as mentioned in the video you’re better off changing the blade over.
@MiltosManolas 10 ай бұрын
i have two the same clippers and is really good
@Chriscutshairuk 10 ай бұрын
They definitely are!
@jimmyalexandre1359 9 ай бұрын
Could you make a video on how to remove the spring to make it a floating lever please?
@bilalk8236 9 ай бұрын
There are two black round rubbers in the lever. You have to turn the top one over and it becomes a floating lever. best regards
@nhiathor8155 7 ай бұрын
@@bilalk8236I tried that and there is too much play. It doesn’t open or close properly. I had an old TPOB reaper with a Wahl style floating lever. I put the Reaper lever into the Kemei 2296. Fully open and close now. Also, a lot less play.
@a.razzaq_23 6 ай бұрын
Can i put wahl magic clip blades on them ?
@Chriscutshairuk 6 ай бұрын
The back blade for sure. Not 💯 on the moving blade as it might not fit the cam follower
@Farlotatte1738 4 ай бұрын
Yes you can I have them and I put the cutting blade with the outer blade too it fits as is
@toronto416. 2 ай бұрын
What's the rpm on the kemie and the rpm on the goblin
@drewl9133 10 ай бұрын
How do you like the trolls? And have you tried the tpob x? They look identical
@Chriscutshairuk 10 ай бұрын
Trolls are great. Don’t fit well on a lot of guards so I changed the blade. Solid clipper. TPOB x will be my next clipper. They’re a better version of these by the looks of it
@agustinmorlino8544 6 ай бұрын
When you switched the kemei2296 to the TPOB blade, did you zero gap or use as is?
@Chriscutshairuk 6 ай бұрын
Zero gapped as it’s my skin fade clipper
@kemistrypops 9 ай бұрын
Jow do they compare to the trolls out thr box?
@Chriscutshairuk 8 ай бұрын
Trolls are probably a better built machine. But they hold up for sure. A great cheaper option
@Crea10e 7 ай бұрын
How did you take the clicks out ? I have the same problem with mine..
@Chriscutshairuk 7 ай бұрын
Unscrew the lever and there’s some gears in there. Take those out
@Crea10e 7 ай бұрын
@@Chriscutshairuk found them thnx !
@frankmcbrien8379 9 ай бұрын
Hi, in your opinion, which are the best clippers for fading? Thanks
@Chriscutshairuk 8 ай бұрын
Personally, I think the Phantoms are. They are my go to fading clipper. The shape of them is super comfortable for flicking your wrist when working the lines out. But that’s only an option. Try out some clippers and see what works for you 👌🏻
@frankmcbrien8379 7 ай бұрын
Thank-you
@ddccddcd7560 7 ай бұрын
How did u changed the lever and the blade?
@Chriscutshairuk 7 ай бұрын
Just unscrew the lever and take the gears out. Unscrew the back blade and swap out to another of your choice
@RealistJ 6 ай бұрын
What mm is the lever when fully open?
@squidward1644 6 ай бұрын
3mm I guess
@RealistJ 6 ай бұрын
@@squidward1644kemei says its 4mm but it don't look it
@erichall1441 10 ай бұрын
Does the tpob pycho blade fit the 2299 trimmers
@Chriscutshairuk 10 ай бұрын
Still yet to try it but I’m 99% sure they will. Same trimmer housing
@ronschannel4940 9 ай бұрын
Is the keimi, optimum, vader and tpob the same guts inside?
@agustinmorlino8544 7 ай бұрын
When you switched the kemei2296 to the TPOB blade, did you zero gap or use as is?
YOUTUBE BARBER ACADEMY
Рет қаралды 305 М.
Il barbiere di casa
Рет қаралды 23 М.