Kemper Tips & Tricks - Pre and Post EQ

No video

Kemper Tips & Tricks - Pre and Post EQ

Рет қаралды 25,665

6 жыл бұрын

Did you know the Kemper allows you to move the position of the EQ block? HW takes a look at the Kemper profiling amps ability to place the EQ block pre amplifier section or post amplifier section. It's a very cool trick and an often overlooked tool to help match profiles and guitars and help you find the best profile for the job.
For more Kemper Tips and Tricks check out our channel and make sure to check out our selection of Kemper Profiles at www.tonejunkiestore.com

Пікірлер: 42

@danray4582 3 жыл бұрын

As someone who ran profiles of older amps unwittingly with post eq, this information is extremely useful. Higher gain profiles were unpleasant in a weird kind of reverb. Much happier now...

@mostlycrazyallthetime 6 жыл бұрын

my friend thank you so much for these vids... from a very no tech savy Kemper owner... plz I beg you make more vids about anything Kemper related.

@theoversouls 6 жыл бұрын

So refreshing not hearing balls-out distortion and wanker playing! Great tones and excellent tip on EQ'ing. Thank you!!

@darrentaylor2752 4 жыл бұрын

Awesome, always love your enthusiasm & passion HW 😂👍🎸

@rockyowitz 6 жыл бұрын

This actually cleaned up some high gain profiles I was considering too muddy, and did just like you said (the guitar I tried this with has Seymour Duncan Alpha/Omega's). Now to pick out a pack to show my support, because now I've got a lot of profiles to try this with. Thanks for the tip and video!

@ToneJunkieTV 6 жыл бұрын

Dr. Rockyowitz you’re very welcome Doc! Thanks for watching!

@florentchatelain3057 5 жыл бұрын

One of the most helpful video ever made on the Kemper. thx

@timh4369 6 жыл бұрын

Love the video I played around with this and really liked the tones using the eq pre thanks a lot !

@dba4292 Жыл бұрын

To help shape the signal before it reaches the amp (change the sound of the guitar to a certain extent) couldn't you just place an EQ Effect before the amp signal in say Effect box A or D? Because how often do we fill up those Stomp/Effects boxes anyways? Is there any benefit to using the Amp Pre and Post EQ opposed to say using any of the Eq Effects in a Pre Amp effects position?

@jimmyrigs 5 жыл бұрын

Getting a KPA this weekend and can’t wait to get more of your profiles!

@scottwb4213 4 жыл бұрын

This was a brilliant video and taught me something new. The post just didn’t sound good. The distortion/breakup in the normal “post” sounded cheap and muddy. The Pre setting really cleaned that up. Sounded great.

@MickQueens 6 жыл бұрын

Never thought about this. Thank you.

@philcory2448 6 жыл бұрын

Nice work Dude :) Keep these videos coming

@mrslate1 6 жыл бұрын

Thank you very much for your Kemper help. I need it and you supplied it!

@Krystof.Veritae 6 жыл бұрын

Fabolous videos mate ........definitely going to get profiles to show support and of course because these sound super great .......any Hi Gain profiles available ? .

@denkmaldruebernach 6 жыл бұрын

thank you man. Great advice!

@shanewallace4294 5 жыл бұрын

More please, you play great too!

@nuttavut2528 6 жыл бұрын

Thanks

@venom3936 2 жыл бұрын

Was that Jackson amp behind you ever profiled? 👀👀👀

@hoodcreeper11 6 жыл бұрын

Can you do a vid on how to dial out fizz on an overdrive sound?.. please

@ToneJunkieTV 6 жыл бұрын

Yes, are you getting the fizz with stomp boxes in front, with the built in stomps or just in the profiles?

@hoodcreeper11 6 жыл бұрын

No external stomps. Just profiles and internal stomps.

@aishaish1885 6 жыл бұрын

Actually loved all those tones...Ben sunn... here I come

@ToneJunkieTV 6 жыл бұрын

Thanks for the Support Nathan

@PleaseBeKind33 6 жыл бұрын

I've been thinking about getting one of the Friedman frfr speaker but I couldn't decide between the cab or slanted monitor version. Does the Kemper sit nicely on top of the ASM-12?

@ToneJunkieTV 6 жыл бұрын

Yes, it fits almost perfectly on the slanted one when put on it's side like a vertical cab.

@247spiritualsoldier 6 жыл бұрын

Hey TJ, I'm about to decided in between Kemper or AX8 and I was wondering if you have used AX8 and how's kemper through studio monitors? Thanks, really enjoying your channel buddy.

@ToneJunkieTV 6 жыл бұрын

I had an AX8 for awhile and decided not to do any video on it. I greatly prefer the Kemper. I thought the AX8 was cool and really liked the editor, but without the desktop editor I found it very confusing to use. It can be learned but it's not intuitive. I suppose the Kemper isn't very intuitive either. From a purely sound standpoint, I believe the Kemper is the best thing out there right now.

@247spiritualsoldier 6 жыл бұрын

Thanks, I greatly appreciate it. I'll go with a kemper and hopefully I'll be able to find decent rig for it. You sound amazing btw.

@ToneJunkieTV 6 жыл бұрын

Check out www.ToneJunkieStore.com, we make some pretty outstanding profiles including the ones I'm using here. Thanks for watching and enjoying the channel!

@247spiritualsoldier 6 жыл бұрын

Awesome! will do man. Thanks.

@247spiritualsoldier 6 жыл бұрын

If I get one of the rigs from your store, do you think it'll sound pretty good through studio monitors?

@conradkriel6279 5 жыл бұрын

nice what cab are you using here mate?

@walid7189 5 жыл бұрын

is there any difference between the 4 stomps and 4 effects? I can basically assign the same "pedals", but sounds different.

@casaroli Жыл бұрын

Stomps come before the amp, effects come after.

@ddropski 5 жыл бұрын

can you do some how to improve an kemper in high gain amps mine are super duppy expecialy past the 12th fret it just sounds like same sound just octave pitched? thank you .....ps your a great player