Yes the video is real-time speed. To get the engraving depth you are limited by the lase wattage well before you are limited by speed of the machine. So, if you use a larger laser (500W, 650W) you could increase your speed and maintain the same engraving depth.

Thank you! Kern's KCAM software along with our laser power control allows us to achieve great detail when engraving!

Show me

CorelDraw accepts almost any file type to be processed in their software. The most common ones would be .pdf, .dxf, .jpeg, .ai, .bmp, etc. If you wanted to upload the file directly into KCAM, then a pdf would be best!

Hello, we buy the artwork from www.gantryco.com. I hope this helps!

Hello!

CorelDRAW is a great graphics design software, but you can use anything that will export a PDF or DXF file.

We use maple wood.

Hello! Any file type that you can get into CorelDRAW or Illustrator will work great for 3D. We use our post processor to export into our software as a .PDF file. Water works, but you need to use a minimal amount, otherwise you will get warping. There are other ways to clean them out that do not include water. Kern does have auto-focus. For engraving we generally use a 2.5" FL lens in our own lens assembly. I hope this answer your questions!

If you mean using a wider nozzle, it is simply just purchasing this part.

I think the video doesn't show the smoke very well. There is a little bit but our top vacuum picks that up. The wood used is locally sourced 3/8" maple. It does seem to laser very clean.

KCAM is only compatible with Kern's laser machines.

This process does not work for metals. It works great for softer materials like foam, wood and some platics.

Fiber laser might be able to do this. This is a Co2 laser that only cuts into certain surfaces.

Yes, we have tested Light Burn and the .DXF export feature will load the file directly into our KCAM software!

We have also found that the PDF print feature also works.

Unfortunately, the stone will be too hard for this type of engraving.

Any bitmap image can be used just convert to greyscale...

@@philbromley4565 Thanks

Can you share where the image was obtained used in the example?

@@nopriors Hi Greg, we got a couple of the files shown in the video from www.gantryco.com/

@@Kernlasersystems Thank you very much! That is exactly what I have been looking for. Your machines are amazing. I hope to step up to one of your small units one day. It is so great to see them made in the US. Hope you guys are staying warm!

Hello, please contact us at info@kernlasers.com and we can put you in touch with a local partner.

Sorry for the late reply. If you have the right software and system, you would be able to do this with a low-wattage laser tube 30w to 50w would work fine, but you would have to go really slow to produce the depth. our lowest wattage is 100w (traveling about 10 to 15 inches per second, at 80% power.)

Yes, the clips shown in this video are being shown in real-time.

They have one for every budget, check the K40`s? I started there....

If you fill out this request a quote form, kernlasers.com/request-a-quote/ a salesman will reach out and be happy to help you! Thank you!

We do have some distributors in Asia. Here Is a link to a map of all our distributors across the world. kernlasers.com/where-to-buy/

Hi Santosh, We would be happy to provide you with some quotes and pricing. Please fill out the request a quote form and a salesman will reach out to you today! kernlasers.com/request-a-quote/