New 2022 RC Car Extreme Testing to destruction

New 2022 RC Car Extreme Testing to destruction - is it as good as they say?

Рет қаралды 446,528

Күн бұрын

Get Stuff here:
www.google.com/search?gs_ssp=...
Servo - www.banggood.com/JX-Ecoboost-...
Dumbo Radio
www.banggood.com/DumboRC-X6-2...
Motor/esc www.avantlink.com/click.php?t...
📕The 75 Traits & Habits Successful people have - kevtalbot.clickfunnels.com/75...
🎓eBay Secrets - 11 steps to being your own boss kevtalbot.clickfunnels.com/sq...
Get Your Merch Here teespring.com/stores/kevs-merch
🧡My instagram / talbotkev
💙My Facebook page / kevintalbotvideos
💡Check out my Business Channel: / @kevtalbot5356
🎥My LIVE Stream Channel - / @kevintalbotrc
🚗Kev's RC Basher School - kevin-talbot.teachable.com/p/...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, insurance and many other topics.
#Kevintalbot #rccars #rc

Пікірлер: 682

@cdogsixty-nine2674 2 жыл бұрын

One thing I'd love to see at the end of your bashing vids is a damage assessment back at your shop. Kind of take it apart a bit and see what all is actually broken. Then we can start to see the weak points of each vehicle. Just a thought. Love the videos!!

@darkki94 2 жыл бұрын

that + the repair bill $$$ !

@dandlugolecki3408 2 жыл бұрын

This is good and all, till he gets blacklisted by all of the companies for pointing out EVERY single flaw. Are the videos not a good enough representation?

@jimjimmyjam8242 2 жыл бұрын

I had a feeling once you pointed out the bent drive shaft out of the box, it was gonna be a disappointment. It was a fun rc for a few good jumps thanks for the video 😃

@SEEYAIAYE 2 жыл бұрын

Something I'd expect from a RTR from Banggood, not a $650 roller.

@bra1nc417d 2 жыл бұрын

Not the driveshaft, it was that carbon fiber brace. It was bending up, sticking out of the chassis.

@Basherqueen 2 жыл бұрын

Mine rear drive shaft from the XTR 2022 was bend even worth fresh out of the box.... 🤷‍♀️ HOW?!?!?

@peterhumphries9227 2 жыл бұрын

Another honest review that just doubles down on the fact that Corally just doesn't quite cut the mustard.. Thanks for the video kevin.

@klausknudsen106 2 жыл бұрын

I own a Kronos v2, never broke or bend anything on it, so for normal use, it can hold up quite nicely, what Kevin is doing is extreme, and i don't believe that all of you are that hard on your cars, just keep that in mind.. Bless you Kevin for doing what you do, so we don't have to ;)

@mrclairesrcs3290 2 жыл бұрын

The chassis bent before it got any real air. The steering went funny just from standing back flips 🤣

@raynman6466 2 жыл бұрын

It's still nice to know that your rc will stand up to the abuse were something to go wrong or if you decide to do some hard bashing. Weak spots are still weak spots

@skeezixmccat 2 жыл бұрын

I have a Shogun and I agree, if you aren't actually BASHING, Corally makes terrific cars. But if you need it to fly into walls and land literal 40 feet drops directly onto the nose/wheels/etc...get a Sledge.

@klausknudsen106 2 жыл бұрын

@@skeezixmccat Sledge is tempting, its just far to expensive.

@jaybomb5022 2 жыл бұрын

Lol this thing couldn't withstand a light breeze compared to pretty much every other RC he's ever featured. For an expensive kit, a bit disappointing the lack of ergonomics and durability.

@scager310 2 жыл бұрын

Man, I watched ONE recommended video a few weeks back and I’ve been undeniably hooked on this channel since. I’m even saying things like Tumble Wumble in real life. Infectious, this man! Keep it up!

@KevinTalbotTV 2 жыл бұрын

Welcome aboard!

@al78cck48 2 жыл бұрын

It's ABSOLUTELY EPIC

@lancevanbeurden3184 2 жыл бұрын

Yup, I just said tumble wumble today myself - it might just make it into the dictionary!

@rcfungames 2 жыл бұрын

Hi Kevin So it's not that tough 🤪 still better off with a Max Great job unboxing it and showing us what it was capable of 🤘😎

@derekgardin1512 2 жыл бұрын

The new Traxxas did way better. Corally XTR no better than version 1

@yanli4539 2 жыл бұрын

We have all seen an RC get punished hard but the comedy you bring to it KEv is just GOLD! RIP TC

@marquisjamie 2 жыл бұрын

Kevin is so hard on his rc’s that parts are bent before he even drives it for the first time 🤣

@808tone6 2 жыл бұрын

They come pre-bent just for him. Gives that worn in feel. 😂😂😂

@rcjabroniyup4959 2 жыл бұрын

That drive shaft bent out of fear. It knew what was coming.

@TomleyRC 2 жыл бұрын

After watching the EXB, Sledge and Kronos videos... I'm going EXB - 1st Sledge 2nd Kronos 3rd (although it had harder hits than the sledge) You need to take the Sledge to that Skate Park to make it fair.

@krazicanuck9045 2 жыл бұрын

We will see what kind of hop ups come out for the sledge. The exb has loads now and that makes it number one in my books too. But let’s see if that changes in a year from now

@joeyfiend7864 2 жыл бұрын

Ay tomley! 😎 I definitely agree. The exb is superior with the 7075 chassis, shock towers, and chassis braces. Imagine if the sledge had those similar parts out the box 🤔

@rustler08 2 жыл бұрын

The Sledge completely stock is a vastly tougher car than the "7075" junk alloy that the EXB comes with. I don't know where Arrma sources their 7075, but it's such a mediocre alloy that it's only a wee bit better than most 6061 stuff. If you're buying an EXB, you better buy either a real 7075 chassis or that brace Kevin has. You're going to have a bent chassis and a bad time, otherwise. Also, buy yourself some spare shock shafts, bulkheads, and tie-rod ends. You're going to break all of those pretty often on the EXB.

@TomleyRC 2 жыл бұрын

EXB without aftermarket upgrades held up better than the Sledge, so I guess it will come down to cost at the end of the day

@eM4rio 2 жыл бұрын

@@TomleyRCwhat held better? We all know the EXB problems. Lost dogbones, braking cups, play in diffs, cheap screws, loosing wheel nuts, braeking shock mounts and the most annoying one, breaking wing mount... that's just to much for me. Traxxas have overall a better quality than Arrma, even Arrmas stickers dont stick :D so I hope that Sledge will be better, to make Arrma just a kick in the butt for a push to make them EXB2 without all that quality/bad design things :D

@robertrose1098 2 жыл бұрын

I'm just addicted to Kev's accent 😂😆 he's a bloody great character !!!! Then of course having kev show us the strength of these R.C vehicles is pure eye candy. I'll never miss a video ... . Unless I've been NUKED 🤔

@KevinTalbotTV 2 жыл бұрын

haha, thanks bro!!

@gr769er9 2 жыл бұрын

Thats why I like this channel not only do you try new rc cars out but you actually put them to the test so we know if it's worth it are not.

@sweatqy3014 Жыл бұрын

I’m super sick right now but I love watching these videos they help me keep my mind off the pain!❤

@wallacengineering8096 2 жыл бұрын

You guys gotta remember Kev breaks literally everything - Maxx, X-Maxx, Kraton EXB, all of it. So its a tiny bit disappointing out of the box. Bummer, thought we had an alternative to the Kraton EXB for a minute there. To be honest, Kevs landings did make it a but unfair to the truck, especially smashing the edge of that ramp - oof thats extremely rough, but no matter. With the popularity of this truck growing, alot of us think that M2C Racing will develop a 4mm 7075-T6 chassis for it. With the chassis being the backbone it should reinforce the whole truck enough to take a massive beating without any other mods, so lets hope he comes through on that 👍🤜.

@pavanp6584 2 жыл бұрын

Aaah it's Christmas every day love your videos Kev you bring the most awesome and true content love to be a subscriber.........

@EJ-74 2 жыл бұрын

Wow can't believe the shaft was bent out the box 😆 Could be worse it could be mine 😂 As Kev would say 😂 Nice torture test Kev 🔥

@nautynate420 2 жыл бұрын

landing in that tree had to be the best possible outcome from that jump, freaking awesome!!!!

@zeekmx1970 2 жыл бұрын

You seem determined to start a LiPo fire. I know you can handle it if that happens so I gotta give you a like for that. You're saving us by showing us what can happen if you bash. That's a hero.

@izaiahzavala386 2 жыл бұрын

Wow kev thanks for the good video and review of the new car!

@rooseveltrainesjr7618 2 жыл бұрын

Man Kevin u put the new sledge thru worst run. An it out did the arrma. I was running my Mojave exhaust. An broke the front bumper from underneath. I'm guessing a bad landing no problem just ordered another one. Keep up the video s brother

@ryetheg.o.a.t.1310 2 жыл бұрын

What do you recommend for a arrma notorious 6s receiver or is stock good they keep burning up

@gurseveksrc3386 2 жыл бұрын

This vid made my day. Just came back from school and open yt to see you uploaded:))

@santiagorodriguez6467 2 жыл бұрын

Man i love your vids keep it up and man that car rips

@Pablo668 2 жыл бұрын

Fun vid! Nice of you to ritually sacrifice an RC truck for us. Yeah from what Claire went through I didn't think it would be very good. For mild bashing only perhaps.

@DVStrikesBack 2 жыл бұрын

The way you opened that Max-8 Combo box.... Jeeez🤣🤣

@matthewkilbey4492 2 жыл бұрын

You are a mad mad with your expensive toys! Love it.

@KilikSNC 2 жыл бұрын

Would be cool to test a Tekno MT410 for us, thanks 😉😁

@Basherqueen 2 жыл бұрын

🤗 Most of the rig survived 👍 You can bold down the ESC with four M3x6 screws in addition to double sided tape 👍👍👍

@RCtitan1 2 жыл бұрын

These videos are always very helpful when renting on rc car

@atomicdeath10 2 жыл бұрын

That pinion install was smooth af.

@henryplaidjacket7860 2 жыл бұрын

Thx 4 helpin us 2 decide mate!

@bwplays2713 2 жыл бұрын

I literally said I wish Kev made a new video and then I saw you made a video what a coincidence 😂

@proracing9672 2 жыл бұрын

Hey kev, love your vids. I would like to see a review on the team corally punicher XP.

@legiony5209 2 жыл бұрын

Honestly I really like that car, I think I would buy it! It looks like it was made for the track, the handling looks perfect 😁

@Rufus2005f1 2 жыл бұрын

I have a Kronos V2 and it handles insanely, so good for BMX/RC track

@landscapingspecialist 2 жыл бұрын

Man that drivetrain sounds silky smooth 👌🏻

@noluckpureskill9985 2 жыл бұрын

Kev brother what's the screw extractor u used? Like the brand if u don't mind

@robertb.4202 2 жыл бұрын

That’s a shame with the Corally having some issues before it’s even run. Hopefully, the Sketer does better.

@rcaddict2865 2 жыл бұрын

Ello! Love ur vids kev, you never fail to disappoint, video idea: Xmaxx with x amount of wheels (10) and make it awd!

@rccarsandstuff4690 2 жыл бұрын

Never fails to disappoint???

@mathijs4660 2 жыл бұрын

Where can i get that tool from. That you use for that screw in the chassis? How is it called?

@Orange-lemon_gaming 2 жыл бұрын

Dose the tornado count as a brasher because I have one and it was pretty strong until I ran it into a wall so does it count ?

@MidwestVillain_Z 2 жыл бұрын

I think it looked cool even without the stickers

@hodgepodge6359 2 жыл бұрын

Tip: an easy way to set the gear mesh is to put a piece of paper between the spur and pinion gear and ram it up to the paper and gear mesh set! Love the vid, keep up the great work!

@undisputex9028 2 жыл бұрын

That's an horrible way to setup the gear mesh...

@williamwallace9427 2 жыл бұрын

Why is it horrible?

@richardsmith8035 2 жыл бұрын

Just getting back into the hobby after a 12 year break, really enjoying the vids Kev👍

@derekgardin1512 2 жыл бұрын

Same here. I was into it from 10 to 17 when I got a real car and a girlfriend lol. Now 13 years later I'm getting back into it. Getting too old to ride dirt bikes, don't heal up like I used to. Might get a SXS though but damn expensive. Until then a couple RCs and a 5th scale 2 stroke gas one will be fun enough!

@myprojectcalledlife 2 жыл бұрын

I love your reviews!

@brynox5743 2 жыл бұрын

I thought that I put my rc’s through hell 😂😂 awesome vid kev keep it up!!

@austinmccoy8835 2 жыл бұрын

I would really like to.see the banggood special "Rofun something or another", just look.it up and it should come up. Awesome vid tho Kev👏👌

@Haha-ld8zq 2 жыл бұрын

Hey Kev I am looking for a brushless combo to put in my slash 4x4 What would you recommend?

@calvinbaker4812 2 жыл бұрын

Make it fast 3800 kv spectrum woo hoo

@808tone6 2 жыл бұрын

Max10 combo

@bling1634 2 жыл бұрын

Kev your vids are always great and funny

@nunu4692 2 жыл бұрын

Damn it came out the box bent already😂😂😂 as of now nothing is besting the 6s exb kraton🤷‍♂️ nice throw down kev, now run the sledge JUST like that in that very same park 😂😂😂😂😁😁😁 man i saw the sledge today it looks badass but one thing i noticed is that theres barely if any room for upgrades it has so much plastic. But it looks beast🔥

@lorenfoster1042 2 жыл бұрын

Sweet video kev.🔥🔥 Keep it up.what are you thoughts and opinion on rpm plastic parts 😉

@hemidart7 2 жыл бұрын

Good stuff and Kev has said the same in prior videos

@drewgoody2957 2 жыл бұрын

I friggen love keys videos esc right outa the box snip snip ..... hahah

@winstonbattle 2 жыл бұрын

Kev you're goin to destroy that Arma , and I'm here for it !! #1 fan

@johngreen5837 2 жыл бұрын

Great video Kev. LET'S GO

@ExelArts 2 жыл бұрын

I love my punisher from team corally but everything seems to bend and break easily tiny screws get lost because of no loctite and the ball bearing for the wheels pop out all the time

@cliffjones9922 2 жыл бұрын

Suppose what you also have to condsider is that its dirt cheap when comapred to the Sledge and for some of us this would be the better option. Yes it may cost more in the long run, but is you stick to only upgrading when things break then for the money this looks a great option.

@playingmantis3237 2 жыл бұрын

Damn Kev! You bashed that rear axle just by looking at it! Obviously you are the basher King 👑

@RobFRC 2 жыл бұрын

Anyone else remember the Corally .30 big block nitro motor from back in the day? I ran one in truggy briefly before displacement limits were set. It was a total piece of junk and lost compression in 4 gallons when all my other nitro motors last 10+ easy.

@bonggwick420 2 жыл бұрын

I just bought the Kyoto 1970 dodge charger supercharged would you be able to do a video on it?

@crombie1792 2 жыл бұрын

I e been waiting for a new video.! Thanks mate.!

@loudbud4207 2 жыл бұрын

Tbh u dnt really review the stock car but u have I believe on another channel but u always changing it lol no problem u want it at its best to get the full potential out of it an i respect it

@carterharris1924 2 жыл бұрын

W Kev what RC car do you think is the best cheap but really good one and really fast

@nelsonpeltier508 2 жыл бұрын

That is a good RC car and great video

@dirtnation5592 2 жыл бұрын

Dude love the crawler videos

@sklobi 2 жыл бұрын

Mammuth Stealth!!! We need to see it already

@Janisani1 2 жыл бұрын

Tip if you round a Hex screw is to use a Torx or 12 edge xzn bit and tap it into the screw.

@theAessaya 2 жыл бұрын

Hey Kev, thanks for the videos! Always amazed to see how far some of the cars can be pushed (and some can't). I have a question for you: do you modify any of the shocks on the bashers you run, or just run them bone stock? I'm specifically interested in ones on the Kraton 6S's, since that's what I have here. Started doing some higher jumps lately (still learning aerial control to prevent lawndarts), and noticed that even a moderate send often results in full chassis-slap against the ground upon landing. Figured doing some shocks modifications might help there. What's your take? Thanks again!

@sonorite2665 2 жыл бұрын

definitely a good idea to do some shock tuning if you're chassis slapping a lot. I would just put in thicker shock oil, maybe add preload depending on if you still want stock handling or not.

@theAessaya 2 жыл бұрын

@@sonorite2665 That's what I've been thinking. Thanks! I'll try some different thickness oils. What about the shocks tuning pistons that come with the Kraton, what would be the uses for them?

@KevinTalbotTV 2 жыл бұрын

Usually leave it stock and let it slap. You can stiffen the shocks but then you can start killing arms, towers, shocks, bulkheads etc

@thunderstormrc 2 жыл бұрын

If you do big jumps the chassi will slap against the ground no matter what. You can try to adjust the shocks but if you make them too stiff you will start breaking or bending stuff.

@theAessaya 2 жыл бұрын

@@KevinTalbotTV thanks for the reply! I'll try and play with different oils and the supplied pistons, but will definitely keep in mind not to overdo it. Funnily enough, chassis bendage is real! Mine's already slightly bowed up in the middle (which is weird, I kinda would expect it to bend downwards). Not much, but the "talbot test" definitely reveals it.

@boii8573 2 жыл бұрын

2:37 now that looks like the car had more than one owner 😂😂😂

@Ukpinball1 2 жыл бұрын

Nice to see steve and jay

@talhaakcaboy 2 жыл бұрын

i think this is the only video that Steve is not smoking :)

@TheWoodlandhoBo 2 жыл бұрын

“Every car with a metal bottom I have… I broke”. 😂 Your jokes man

@bigkahuna1850 2 жыл бұрын

The pillow ball is more for racing with high traction and if anyone have problems like what kevin talk about the pinion gear screw use nitro cleaner and microfiber tower to get the residue off and apply blue loctite and your set

@theroadwarrior666 2 жыл бұрын

Hey kev here's a little truck for ur rounded Allen's. Stick a torks bit the same size in it it will grab the corners and usually get em out quicker than drilling and using extractors

@hemidart7 2 жыл бұрын

How about a company that just puts good hardware in the first place

@Thathonda500rubicon 2 жыл бұрын

Can you do a review on the element Enduro24 sendero trail truck crawler?

@tatismasculinity 2 жыл бұрын

Hey Kev! I just started your Ebay course !

@mattsanta2396 2 жыл бұрын

greetings from Vancouver Island!!

@V8chump 2 жыл бұрын

I’ve you gotta loctite the sledge motor mount screws and take it out for another test bash 😈

@bsbigrcadventures2089 2 жыл бұрын

I didn’t think it was going to last very long befor you brock it lol 😂 👍

@sidunn1634 2 жыл бұрын

Love the full send videos

@MrSchmitty1000 2 жыл бұрын

Does anyone know whats that song at 4:43? Talking about the stickers for the body. I had a Tamiya bmw m3 Schnitzer 20 years ago and i forgot the film on the Body.... yeah not good XD

@BangForYourBuckRc 2 жыл бұрын

I’m starting to think that if your going to keep jumping at the skate park you should at least try to keep it in the park, not jump over the whole park!😂😆 Jeez, you could hit a bird, or a plane or something!😂😜! Epic Kevin!

@stuckintrees4796 2 жыл бұрын

That’s the perfect landing spot. Haha👍

@lonestarr673 2 жыл бұрын

I love the little bits you throw in😅 “lets go brandon i agree” 😂. Also makes me sad but we all know the facts here😅

@williamtorbeck5641 2 жыл бұрын

KEVIN I watch all your videos doing all the endurance testing I wish I could, thank you for all you do. Cant wait to see the monster truck finished! PLEASE! do you have any RC models you could sell at a discount? I simply cant afford a new model on ssi. Just looking for a leg up on a hobby I wish I could afford. Id pay shipping

@phrc5679 2 жыл бұрын

If you would like to get his attention you probably gotta get to a vid earlier

@radunit4805 2 жыл бұрын

At 11:39, that Kronos decided to nest on that tree 🤣

@christianroberts9206 2 жыл бұрын

Can you take the traxxas max and turn it into a drag truck with drag tires

@gmodesike 2 жыл бұрын

Kevin, you and a rc car designer should design the best all around rc truggy.

@joeygarvin5247 2 жыл бұрын

Kev can you plzz do a review on the pirates 3 truggy I want to get me and my brother one but I want to make sure they are good first

@GameTrekkie 2 жыл бұрын

Where do you guys get the phone mounts from?

@hemidart7 2 жыл бұрын

Just homemade mickymouse

@frfrank5862 2 жыл бұрын

Any chance of a chart, bashing and speed run comparison of the 1/8 Truggies between Kaiju EXT, Arrma Kraton, Team Corally Punisher XTR and Traxxas Sledge.

@michaelmcclanahan2860 2 жыл бұрын

You should try some Redcat products. They had some super cool crawlers for dirt cheap. Be cool to see how they are with you.

@andrelietzau2015 2 жыл бұрын

Kev is it possible for you to do a review on the arrma vendetta 3s please and if so try to make it faster

@rcjabroniyup4959 2 жыл бұрын

I just installed a brand new hobbywing setup in my kraton exb with the dumbo rc transmitter it worked for 1 battery. Now it blinks red and won't work. I tried a different transmitter and I get the same thing. It wasn't a cheap setup either. Anyone got any remedies ? I'll post a video of it helps. Thanks

@jonp1116 2 жыл бұрын

Whenever I strip out a screw I pound a torx bit in the hole and they always come out! Way easier than drilling

@leemollison7508 2 жыл бұрын

Good tip! 🤔 Hard on your torx bits though 😂 Don't use your Wira's

@aniketbandgar86 2 жыл бұрын

Your are the SI unit of temperature🤘

@someguywhoexists9880 2 жыл бұрын

Hey kev you should see if the 80cc Raminator can tow some cars with someone sitting on it

@colewiatt6580 2 жыл бұрын

Damn, I had high hopes for that truck. But it didn’t do too well…

@reconrc1787 2 жыл бұрын

First, thanks for all you do to point out RC shortcomings. Second, That thing didn't even last a whole battery. What was it in real time, 10 minutes? I'd be really pissed if I just paid $100's and had them same results.