*_A PROPERLY BALANCED WITH TINY WEIGHTS, SOLID-RUBBER-TIRE is exactly what is needed for the "Project 250mph Car"!!!_*

My wife was tired of me monopolizing the TV and watching Kevin all the time. I came home last week and she gave me a 36” TV for my shop…YES!!

G’day Kev. Thanks so much for reviewing my VIPAZ solid tyres, I’m honored mate. Glad they held up as well as expected and looks like you guys had a blast. 😎👊🏼👍🏼💪🏼

Yeah I need to get myself a set of those!!! They look awesome!

oh dayum! great timing, i just pulled my old wheels and tires out of the trash, i burned them down to the foams!!! grabbing these for some sideways fun, those toyo tires for the Felony were very expensive!

2:54 Lidl packing lots are the best for rc cars. They are usually huge and they have good asphalt. Make sure to go when it's not busy otherwise you will have a hard time trying to keep your rc vehicle safe.

Win my RC Car here - raffall.com/343373/enter-raffle-to-win-arrma-infraction-6s-hosted-by-kevin-talbot (everyone can have 1 free ticket)

I've run these Vipaz tyres. I've had amazing longevity, at 18 packs one wheel on the first set failed. The 2nd set has 19 or 20 and, while getting thin, are still holding up. The tyres do seem to make the drifting more fluid to me.

You know there's probably a picture of Kev's face... in the office of most tire companies... with Darts in it.😝

when’s the race against the lambo

Funny, I dealt with Mitch from M2C Racing over10 years ago now, with rear toe blocks for my Losi Ten-T. He sent me a raw, unfinished set to test on my truggy. I'm so glad to see He's still going so strong, and making so many cool parts for so many different cars!

7:33 I love that wasted thing you do I’ve been watching every upload for over a year and it gets me every time😂😂

Need to run that 250mph car daily.

Its kinda crazy we are all witnessing Mitchell growing up seeing him from time to time on channel :D

Thank you for reviewing the tires.. I have been following this guy for a while that developed them. To see them used like this makes it a lot easier to make my decision on buying the car again and the tires... The stock ones just don't last long enough

The pink smoke was like a gender reveal😂

I built a drifter from the traxxas 4tec 2.0 thing was a beast w/ 3s lipo.... but apparently, to properly run my car, you can't use parking lot asphalt. you need to either use a specific type of flooring, or just more a tar-over... bc the tar evens out the asphalt better. also avoid cracks and "burnouts". but it turns out if you want to drive the RC car on track you are out of luck, as most tracks only allow 2wd, brushed motor setups and some w/ specific tire requirements. so now I have a drifting 4tec 2.0 and no where to run it proper.

Steven and Mitchell are hilarious 😂 love those guys

I wonder if a solid rubber tire would work on speed runs. Maybe a rubber thats been treated, so its stronger/harger on the inside. And softer on the outside. So it has grip to get going, then the strength to not be ripped off? I just dont know how theyd get about treating circular rubber to have those properties

Love Steve's EB4. Just converted one of mine. Apart from the fire!

Kevin I just have to tell you how much I love and appreciate your channel and content. I haven't had an RC car since I was a teenager when I had my Tamiya Frog. I have been watching you for a few years now and had planned on getting back into the hobby but my life has been a landslide of disappointments and heartbreak over the last 2 years. I'm not sure when I will be able to afford to start back up with the hobby at this point. It's very possible that I may lose my home and have to file for bankruptcy. Due to physical and mental health issues, I've been unable to work for over a year now. My fiance set up another life with another man in another state and left me abruptly. Your videos bring me a great deal of pleasure, and you are an inspiration. Thank you SO much for doing what you do. It's people like you that make this world a place worth living in Cheers, mate, from California, USA.

We need to change the name to RC car upgrades that no one knew about... Until now

Stiven is an real Rc destroyer champion. He is so good at that. You could use him for your durability tests

I would really be very interested to see these tires mounted on an RWD chassis. Pls kev remove front drive shaft for more smoke. Great work like always.

Great to see Kev using WestOzRC tires. G'day Dave 🥰

Loc-tite makes CA glue applicators that work great for glueing tires either at the bead like on the X-MAXX or full surface to surface. They have a stainless needle tip in three different sized for thin, medium or thick glue. (Crazy glue, CA/cyanoacrylate etc) you can reall get the needle in between the tire and wheel.

Your videos always make me smile, watching you having a blast with your mates, this is what life should be like.

Thats the tyres you should go for with carbon rims in your 250mph. Use additive for more grip or make them in a softer shore. Solid rubber with carbon or alu rims. Use Loctite 405

You are tops, Kev! Whenever we think it, you do it. That is what separates you from the rest! Awesome VID!!!!

Always fun watching you out with your mates Kev. The Infraction is a pearler of a car. I like mine, really should use it more often though.

Hi Kelvin, I have a Xinlehong 9125 and I want to upgrade it to brushless and I want to use two motors, my question is how to connect two motor cables to one esc, can or should I use two esc?

Love the upgrade tyres. Awesome thanks for the info Kevin Allways a top job. Love ya work

Superglue in the eye……😖

8s steve knows the lingo to well. “It could be worse??” 😂

"It's a rally car" (Does a massive wheelie)

1:20 - I had a metal superglue tube pop and spray glue all over my face when I was 12, it completely glued both of my eyes shut for 9 hours+ till the doctors could numb them and rip them apart. Safe to say I’ve never used superglue since…

Kev has cost me just over 15k this year in RC stuff. I used to be HEAVY into it, got out of it, watched my first Kevin video this year then watched every single one. Ive bought everything he loves and some he kina likes. Cant wait to see if you get the Promoto as well! I love ya Kev, my wallet hates you though! LOL

Love the channel. Monster truck stuff is epic. Same as the RC fun keep on keeping on brotha

i love your videos kevin talbot keep up the good work i want to buy an rc car but i don’t know what one to buy and i don’t have money right now

Issue is after a few mms are worn ur truck pretty much will be scrapping the ground badly. They might last a bit longer but if you think because they are hard rubber they have to go trough the whole thing before you replace think again. Around 93mm Of tire diameter its pretty much done. I would still go grp or silver hoons specially when they are on sale

hey kev im hoping to make a rc mazda 787b some time in the future how do you start off by building one of your rc cars like the speed world record cars you have

Solid rubber tires for speed run cars? Softer compound and some longitutinal thread for heat dissipation. I mean like F1 tires were in beginning of 2000s.

You should use motorcycle grip glue to mount those tyres.

Originel tires are difrence size 100/42 107 /53 , those rubber ones are 4 of the same size? Does it any harm to the diff etc? Also u need 4 front rims then?

Those solid rubber tires should work well on your 250 project just cut treads in them or scuff em up ahead of time.

Yeah Kev the brand new arrma infraction is unmolested

Dude thats amazing love your vids and can u do one with a rc helicopter? ❤❤

Well done Kev! This is another great video from you. I love it😀😀

Those infractions look so fun.

@kevin you need to get one of those 1/5 rally cars that looks unreal.

I don't think most people will drive like that. I've had my ex07 for over a year now and have yet to change the tires. 😂

Love the Infraction. Don't get out enough with mine. Seriously looking at getting me some of those tyres though mate. Good spot!!!

5:21 its a girl 😂 Kev “ I only get 1-2 runs out of these tires “ Also Kev “ check out this burnout “🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣love your videos 👍🏻

Find a compound between those rubber n foam tires for your 250mph record rc?

this reminds me of the glory days of starting to drift my HPI sprint 2 flux brushless 20 years ago... except ours were PVC plumbing pipe press fittes to the rims with footage pressure XD No smoke though but you could drift forever on a set and make 4 sets of tires for 2 $ XD

Great upgrade. They r only good for drifting. I love them. Thanks @m2c racing

Mitch looks like he lost a bunch of weight. Tell him congrats. Everyone looks like they are having a blast

Thumbs up on the new rubber?

thanks kev! i love my Vipaz and you will too

Pink smoke to match the colour of the chassis

Awesome street bash!!! I told you you'd love them!!!! I dont think anybody has more fun than you brother! Thanks for punishing the parts!!!

The richard rawlings of the rc world 🌎 👌

That's my biggest complaint with the infraction. Definitely giving them a try

That’s smokin! Excellent mod - but much better to be smoking tyres than smoking speed controllers 😂

Did some research after smoking a tamiya ESC. The smoke is pink due to iodine burning off I believe from a failed capacitor.

Kev, let me 3D print you some tires for your infraction. I’m thinking it can go two ways, they may blow to pieces or maybe it will hold up. 🤷🏻‍♂️ it’s worth a shot if you wanna try it!

More rubber for longer burnouts!!! I want the giveaway infraction!

What road tires are be best for the infraction? Something grippy and more durable (if possible, haha).

It's crazy that you can get a 205/55/16 tire for just over 30 euros. Rc car tires are proportionately much more expensive.

you should try using those solid rubber tires on your speed questing cars, to fix your tires exploding.

If you can figure out a way to catch grip on those VIPZ tires, might be a good candidate for your super-long HoBao VTE2 build since there isn't a foam with a high enough shoal hardness to keep from shedding the way it seems to with the high weight of the custom build you have. I would like very much to see you hit 230-235mph with that build... I think that is the limit if you can catch grip!

Thank you for the fun! if I had the cash I think this is what I would get into but this is a good way to live vicariously!

Didn’t even notice the channel had 2.41m subscribers , I remember start watching it when you had like 400k

Would the solid rubber tires not work for the 200mh car? As far as the foam tires coming apart I mean. Wander if the solid’s would hold better…

I'd use an alloy of PLA and PU for the tyres to make the powder that comes off somewhat biodrgradable.

105$ for bare rubber rings? No thank you lol

_Hoonigan School Of Tire Care_

Why is it overheating so much? Do u have bigger batteries in it then it should have? Or do those RC cars just overheat for no reason.

Man those foams looked fun to drive! I wonder if i could get some for a Felony 🤔

I love rc, and my Traxxas broke, and this is my dream rc. I love your videos, and I have been a long time fan. Keep on having fun in what you love.

Hello Kevin I wanted to reach out to you to say thank you for providing your honest opinion it was your video were u sent the fireteam of the suicide jump I remember how nervous I was to spend that much on a rc as I'm disabled on a tight budget but you are the reason I decided to take the leap I love it and anytime I am looking for info I go to your site first love from delta colorado USA 😊😊

Have you ever thought of doing Andy the Landy in an RC going super fast😊

You should buy another set of the m2c tires and see how long they’ll last on the burnout car

mosfets always pink or purple smoke.

Kev, what do you like better a Traxxas Maxx or the Traxxas X maxX.

I like the tires, good job mate!!!

You don’t be getting grip out of these ones just get Grp 7 they are quite hard but you still get traction

Put some fans on that ESC and duct it out the body. That shell is a big oven.

Poor Andy the Lady! It's now the burnout truck!

Hey Kev! I'm gonna buy myself an XRT soon, please could you try something for me? I wanna know if the X-Maxx shocks and springs will fit the XRT and give it more ground clearance.

How bout the solid tires on the speed run car or 3d printed tires

Hi Kevin why don't u use the Same tires for your speed run maybe it will work

Kevin, have you ever seen the Movie American Pie? The guy accidentally super-glued his hand to a VHS naughty tape and his hand to his sausage because he thought it was hand lotion. 😂😂 It's a hilarious movie about American kids graduating high school and partying in the 1990s. You must watch it.

I've fried an esc like 8s did. I got the shell off the car and the battery unplugged so quick lol

I've superglued both my eyes while opening the bottle before, and now I look away every time I open one

Kevin you should try those rubber tires to break the speed record you cam screw the tires on the rims and you can also make tread like real tires for grip

Great vid kev. Them solid tyres look interesting 🤔 the felony would benefit from a set of them for sure. Eats the standard hoons 😂

Can u do a kyosho nitro conversion to electric brushless as want to go electric not enough time to maintain nitro thanks

That esc is a gender reveal 😂

Imagine using these on the Speed Record car