Keychron K8 (Aluminum, RGB, Hotswap) Review and Modding

  Рет қаралды 284,212

Austin V

Austin V

Күн бұрын

A quick review of Keychron’s new K8. This is the RGB aluminum frame version with a hotswap PCB. I decided to mod it by adding some foam inside the case as well as lubing the included Gateron brown switches with Krytox 203. Sound test comparison at the end.
Get the Keychron K8 here: www.keychron.com/products/key...
Links for the stuff I used in the video and where I bought them
4 prong pickup tool: amzn.to/2Gsm4mk
Needletip tweezers: amzn.to/2TLtMe2
Brushes: amzn.to/2TIbo68
1/8" neoprene foam: amzn.to/2HJHo7y
Hobby knife kit (includes knife, ruler, cutting pad, replacement blades): amzn.to/3jNPxo6
Metallic Sharpie markers: amzn.to/2HSk9rP
Double sided tape: amzn.to/3eeMVOW
Clear ruler: amzn.to/3kNOIwW
Switch puller: amzn.to/3jL0WFi
Dielectric grease: amzn.to/3mGCwid
Brushes: amzn.to/2TIbo68
Small screwdriver set: amzn.to/34IvsLR
Multiple bit screwdriver set (has the hex bit for outer rails): amzn.to/3eqQORj
Flushcut clippers: amzn.to/2HIDqfp
Deskpad: amzn.to/3ecJgBv
Switch opener: flashquark.com/product/switch...
Krytox 203 Lube: kebo.store/collections/access...
Switch films: kebo.store/products/switch-fi...
Camera Equipment (I used my iPhone to record this vid, but have since switched over to a real camera)
Canon EOS Rebel SL3: amzn.to/3oJxqDC
Camera battery pack (for unlimited recording time): amzn.to/3jLoqu5
El Gato CamLink 4K: amzn.to/35THUry
MeFOTO tripod: amzn.to/3jMpa22
Camera overhead tripod mount: amzn.to/3jNTk4O
Camera ballhead: amzn.to/3mGtKkm
Audio Equipment
Blue Yeti microphone: amzn.to/35Vqw5s
Foam microphone cover (works as pop filter): amzn.to/31XOBaD
Microphone stand arm: amzn.to/3oKBBiC
Blue Yeti compatible shock mount: amzn.to/2HSnW8x
Lighting Equipment
LED floor lamp + side lamp: amzn.to/32ixssL
LED ring light: amzn.to/3kN2e42
0:00 Intro
2:10 Height Comparison
2:49 Disassembly
4:07 Adding Case Foam
7:05 Sound Test - Stock
7:56 Sound Test - Lubed Switches and Case Foam
8:52 Final Thoughts
#Keychron #K8 #MechanicalKeyboards
*Disclaimer: Amazon links are affiliate links. Clicking on them doesn't cost you anything, but it does really help me keep making videos

Пікірлер: 497
@mary6305
@mary6305 3 жыл бұрын
The quality of the sound improved so much after adding the foam!! I hope Keychron is watching! Great video, thank you for doing it!!
@AustinV
@AustinV 3 жыл бұрын
Totally agree! Would recommend adding the foam for anyone that buys this board. Thanks for the support!
@itshertzzz
@itshertzzz 3 жыл бұрын
@@AustinV Does the foam came with the keyboard or do I need to buy it myself?
@AustinV
@AustinV 3 жыл бұрын
@@itshertzzz The 1/8" neoprene foam I bought myself but the thick foam was the foam they used in the box that the board came in
@itshertzzz
@itshertzzz 3 жыл бұрын
@@AustinV Noted. Thank you for the information 👍
@alessandroloreti8448
@alessandroloreti8448 3 жыл бұрын
@@AustinV Hi and compliment for the video; I would like to buy this keyboard and it seems inevitable to put in the foam, but i'm afraid of breaking something, for example the switches. In your opinion is it very feasible or do I risk breaking something? Sorry for the trouble and for my english (I'm Italian)
@imtortoro
@imtortoro 3 жыл бұрын
When I clicked he vid I thought u had like 100k subs. KZfaq is doing this channel dirty
@AustinV
@AustinV 3 жыл бұрын
Thanks so much for the kind words! If you would like to help out, you could share my channel ;) I'd really appreciate it
@Abdullahxvii
@Abdullahxvii 3 жыл бұрын
this was JUST the video i was looking for. i plan on making all these mods once i pull the trigger and buy a k8. thanks man, great video!
@AustinV
@AustinV 3 жыл бұрын
Thanks for the support! Glad I could help out
@bixby451
@bixby451 3 жыл бұрын
Awesome, I'm definitely gonna mod my K8 once it arrives on Friday. Thank you for the step-by-step process :D
@AustinV
@AustinV 3 жыл бұрын
Good luck with mods!
@taur6115
@taur6115 3 жыл бұрын
No problems, only solutions,,, Nice job!
@oddballaklyama4395
@oddballaklyama4395 3 жыл бұрын
I finally bought a K8 because of your video. I went all out with the aluminum, rgb, hotswappable version. You really deserve much more subscribers.
@AustinV
@AustinV 3 жыл бұрын
Nice! Congrats on your new purchase. Glad I could help you in your decision. And thanks for the kind words and your sub!
@anishjami9680
@anishjami9680 2 жыл бұрын
how is it so far? I'm planning on getting the same model without the aluminum.
@oddballaklyama4395
@oddballaklyama4395 2 жыл бұрын
@@anishjami9680 It's been a good 8 months and I'm still using it daily. I got the brown switches so I lubed them lightly and did the foam mod for sound dampening. I kind of regret choosing the RGB variant since I rarely use it now after recently changing the caps to non-backlit PBT ones, it still looks beautiful tho when the RGB is on.
@joshrayner7167
@joshrayner7167 2 жыл бұрын
How are the brown switches?
@theangelopez
@theangelopez 3 жыл бұрын
Just ordered a K8 for my first MKB and am researching what mods I want to do. I'm so glad I found you, I'll be taking your recommendation and padding the inside too! Great vid!
@AustinV
@AustinV 3 жыл бұрын
Glad you liked the video! Gl with mods!
@nyctophilxii
@nyctophilxii 3 жыл бұрын
This is a really informative vid!! ive been searching for keychron reviews. Good job!
@AustinV
@AustinV 3 жыл бұрын
Thanks! Happy you found it useful!
@dextervidemy4432
@dextervidemy4432 3 жыл бұрын
fortnine justin is cracked
@alderpeirce7705
@alderpeirce7705 3 жыл бұрын
Thank you so much for making this video I have been searching for so long and this computer fits my needs perfectly
@AustinV
@AustinV 3 жыл бұрын
Glad you found it useful! But you do mean keyboard right? :P
@dolphinoplaza5904
@dolphinoplaza5904 3 жыл бұрын
Thanks for the information, I got a Keychron K8 with Gateron browns coming in soon and I plan on modding it a ton. Thanks for showing the stuff I need to mod first (like the hollow insides)!
@AustinV
@AustinV 3 жыл бұрын
Glad I could help! What mods are you planning on doing besides adding foam to the case?
@orangea9458
@orangea9458 2 жыл бұрын
Hey man how did this go? Do you have a video or a sound test of a before after? Planning on the same as you
@Mystic-yt2lk
@Mystic-yt2lk 2 жыл бұрын
This is awesome- I just got one for my brother and he loves it
@pindrusha
@pindrusha 2 жыл бұрын
Damn, that sounds amazing. I'm definitely stuffing mine with some foam, too once it arriver :) great review. Thank you
@Crestxo
@Crestxo 3 жыл бұрын
Gonna buy the Keyboard because of your review. Very well done and informative - been trying to get into custom keyboards but because of the vast amount of options and very limited stock I felt very overwhelmed. So this feels like the perfect fit for me. I will definitely use foam and lube the switches, the difference is just crazy. Also the hot-swappable option is very nice as it allows me to experiment with other switches in the future. Great Video 👍🏻
@AustinV
@AustinV 3 жыл бұрын
Glad you liked the review! Good luck with mod!
@joshrayner7167
@joshrayner7167 2 жыл бұрын
How have you been enjoying this? I'm thinking about getting it in red
@ravkhangurra7522
@ravkhangurra7522 3 жыл бұрын
Very informative video, i might get one of these keyboards!
@AustinV
@AustinV 3 жыл бұрын
Thanks! Enjoy it if you do! I think it’s a great entry into the world of premium mechanical keyboards
@jedijunia563
@jedijunia563 3 жыл бұрын
Hey there! I really wanted to thank you for your video. It has helped me a lot in doing research for a video I just finished making (about the best keyboards for beginners in the hobby). I put the link for your video in the description. Thanks again!
@AustinV
@AustinV 3 жыл бұрын
Thanks so much for the support! I'm glad you liked my video enough to put it in your own video. That video you made was super informative and really well made!
@jedijunia563
@jedijunia563 3 жыл бұрын
@@AustinV thank you for watching it! I always look forward to watching yours!
@cececooke7684
@cececooke7684 2 жыл бұрын
This is an EXCELLENT product. I’ve been using mine for work since August 2021 (8-9 hrs/5 days a week) and have had no issues. The RGB effects are simple and entertaining. I can change the theme right on the keyboard. I charge it once a week. Awesome typing experience!!
@yogi3084
@yogi3084 Жыл бұрын
Is per key rgb possible?
@AleOnYouTube
@AleOnYouTube Жыл бұрын
Couldn’t agree more, I had mine for over 2 years with no issues at all, simple and effective.
@UsefulChewtoy
@UsefulChewtoy 2 жыл бұрын
Holy crap, judging by the first sound test I thought those were blue switches. That foam mod is incredible
@Subdubbin
@Subdubbin 3 жыл бұрын
5:33 and the next shot are very satisfying. Well done sir.
@AustinV
@AustinV 3 жыл бұрын
Thanks!
@andieluke1366
@andieluke1366 3 жыл бұрын
Appreciate the concise yet detailed steps. Liked and subbed!
@AustinV
@AustinV 3 жыл бұрын
Thanks so much for the sub!
@xander7319
@xander7319 3 жыл бұрын
Dude this channel is soooo underrated
@AustinV
@AustinV 3 жыл бұрын
Thanks! Really appreciate the support!
@granthe1174
@granthe1174 3 жыл бұрын
Agree!
@aamir1972
@aamir1972 3 жыл бұрын
Those keycap and switch removals were amazing
@AustinV
@AustinV 3 жыл бұрын
Hehe thanks
@mly_f
@mly_f 3 жыл бұрын
I have this keyboard but swapped the brown switches with c3 kiwis. Good review!
@AustinV
@AustinV 3 жыл бұрын
Thanks! How do you like the board with kiwis in them?
@Theblerdgurl
@Theblerdgurl 2 жыл бұрын
Just got one of these and I love it. But after watching this now I want foam in mine too! LOL Great vid!
3 жыл бұрын
you should have like 800k subs, better yet 1 million, you're so underrated. I am definitely getting this keyboard, thank you so much. I subbed and liked
@AustinV
@AustinV 3 жыл бұрын
Thanks for the support! Enjoy your board!
@dylanmartinez925
@dylanmartinez925 3 жыл бұрын
Putting the foam inside sold me. That sound is awesome. My current keyboard is just as tall as this so im used to it and have no issue typing with a higher raised keyboard.
@dylanmartinez925
@dylanmartinez925 3 жыл бұрын
Plus I didnt want to spend that much over $100. Not ready for the $300+ custom boards just yet.
@AustinV
@AustinV 3 жыл бұрын
@@dylanmartinez925 I wish you the best lol. I fell down the rabbit hole of mech keyboards real quick
@dylanmartinez925
@dylanmartinez925 3 жыл бұрын
@@AustinV hey do you know what screw driver you used? non of my hex bits seem to be working.
@AustinV
@AustinV 3 жыл бұрын
@@dylanmartinez925 Unfortunately, I don't. This was some cheap screwdriver set I got at a convenience store many years ago. You could try this set. I recently ordered it and it has a bunch of hex bits in the set. It also has free returns if it doesn't work out for you. www.amazon.com/gp/product/B01E16J6RQ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
@ElliotKwan
@ElliotKwan 3 жыл бұрын
Thx. For the vid. Will follow your foam steps
@brandonzau2121
@brandonzau2121 3 жыл бұрын
How do you only have 55 subs?! Amazing content keep it up!
@AustinV
@AustinV 3 жыл бұрын
Thanks so much for the kind words! Really appreciate it
@ingliss
@ingliss 3 жыл бұрын
I've vascillated over buying a UK K8 with mx brown equivalents, but the before and after in this video tipped the balance, thanks!
@AustinV
@AustinV 3 жыл бұрын
Glad you found it useful!
@ingliss
@ingliss 3 жыл бұрын
@@AustinV So here's the lesson - carefully look at the keyboard being used before you buy one. As a total neophyte I didn't notice "hotswappable" being vital to the simple mod. "I'll never swap them" I thought when i checked out - which is true, but also I'll never apply this mod as a result. Still a very decent keyboard for the price, but it is baffling why it's set to high, and it's a bit twitchy when it's switched through a USB KVM, sometimes needing the cable to be popped out and back in before it wakes up.
@EnforcerMan
@EnforcerMan 3 жыл бұрын
Excellent review man. Subscribed
@AustinV
@AustinV 3 жыл бұрын
Thanks for the sub friend!
@Rea_per
@Rea_per 3 жыл бұрын
Thank you bro, I might cop this
@algorithm1313
@algorithm1313 3 жыл бұрын
Lovely idea dude!!!!!
@AustinV
@AustinV 3 жыл бұрын
Thanks!
@ryansmith5043
@ryansmith5043 3 жыл бұрын
I noticed the video and script quality, then noticed that somehow you aren’t viral??? Man keep this up. Gained a sub
@AustinV
@AustinV 3 жыл бұрын
Thanks so much! Really appreciate the support and the sub!
@TonyThomas10000
@TonyThomas10000 3 жыл бұрын
Good review...just got my K8 and love it!
@AustinV
@AustinV 3 жыл бұрын
Thanks! Glad you’re enjoying your new board. What switches did you get on it?
@TonyThomas10000
@TonyThomas10000 3 жыл бұрын
Austin V I got Gateron Browns.
@AustinV
@AustinV 3 жыл бұрын
Oh nice!
@wonkiestwook2103
@wonkiestwook2103 3 жыл бұрын
loving your vids bro, keep it up!
@AustinV
@AustinV 3 жыл бұрын
Thanks for the love!
@alexkarp130
@alexkarp130 3 жыл бұрын
Nice video! 👍
@f.ingenia
@f.ingenia 3 жыл бұрын
Cool modding!!
@surajkarthikeyan3650
@surajkarthikeyan3650 3 жыл бұрын
Enjoyed the video, great job :)
@AustinV
@AustinV 3 жыл бұрын
Thanks! Happy you liked it!
@w1zard.
@w1zard. 3 жыл бұрын
Thank you Austin!
@Huey419
@Huey419 3 жыл бұрын
Great review!
@AustinV
@AustinV 3 жыл бұрын
Thanks!
@BennyTygohome
@BennyTygohome Жыл бұрын
I've ordered this keyboard for my dad and waiting for it to arrive. He specifically wanted North facing like in the k8, else I probably would've ordered the k8 pro which already comes with foam and silicone layers, screw in stabilizers but has South facing LEDs. So I'm getting him this k8 and I'll modify it similar to what you did but slightly different: - Poron foam for between the plate and PCB (ordered pre-cut foam kit from keyboard kustoms and it's specifically cut/mapped for the k8). - Poron foam layers (2 layers) for below the PCB at bottom of case (these are bundled with the above foam in a foam kit) - Blue Painter masking tape mode (I think two layers) for bottom of PCB. - I also have three different types of foam switch pads for the switch pads between the switch and PCB, but I'm unsure yet which foam type I'll use (poron foam, pe foam, or eva foam -- in order from firmest to softest). - tiny teflon pads for wherever the stabilizers and bars contact the plate and pcb. I have a bunch of these tiny teflon pads leftover and I'll see if they make any difference. - I'm considering ordering a set of Durok plate mount stabilizers, but I'd like to see if the ones that came with the keyboard can be used and sound/feel just as nice. - For switches I'm thinking of trying out the Gateron Pro Brown Tactile that come with the keyboard. Depending how those feel I may change them out for a set of Kailh Brown Box V2 Tactile 45g (because I already have them), or Kailh Clione Limacine Tactile 58g (fully translucent switch, including stem and I already have these too) , or ordering him a set of Boba U4T Tactile 62g (I'd have to order these so going to try those other two first). - YMDK OEM PBT Double-shot shine through (I already have several of these in a variety of colors so I'll just use whichever he likes best. I'm so excited! Thank you so much for the video. It showed me exactly what I was needing to know, such as how to seperate the plate from the PCB etc. Thanks!
@giovankabisano2266
@giovankabisano2266 3 жыл бұрын
Great quality content!
@AustinV
@AustinV 3 жыл бұрын
Thanks!
@patrickroelens1699
@patrickroelens1699 3 жыл бұрын
Amazing video loved it
@AustinV
@AustinV 3 жыл бұрын
Thanks so much!
@barnahalo6916
@barnahalo6916 3 жыл бұрын
Hello! Very nice video! It helped me a lot.
@AustinV
@AustinV 3 жыл бұрын
Glad you liked it!
@PrinceRapopy
@PrinceRapopy 3 жыл бұрын
This video is a great help since I’m trying to find a good customizable and professional-looking replacement to my years old, obnoxious-looking gamer themed mechanical keyboard. For such a small channel, the production quality is absolutely stunning too! Your effort deserves so many more subs, and I’m gonna join the club for sure. I do have a question though, are the little indicator lights above the arrow keys on at all times or only when you’re Win/FN-locked? I prefer as much of a refined and no-frills look as possible. Thanks again for the quality content!
@AustinV
@AustinV 3 жыл бұрын
Thanks so much! Really appreciate the support and nice comments :) Yeah the indicator lights are only there to let you know if something is active. I only used it in bluetooth mode so not sure if the charging light turns off after some time
@PrinceRapopy
@PrinceRapopy 3 жыл бұрын
@@AustinV Awesome, thanks! Wired is my preferred way to go, so that's why I was curious
@lb6660
@lb6660 3 жыл бұрын
I am 100% going to put foam in my if I get one for Christmas!
@AustinV
@AustinV 3 жыл бұрын
Gl with mod!
@JayzBeerz
@JayzBeerz 3 жыл бұрын
Nice job with the lube and foam it sounds much better.
@AustinV
@AustinV 3 жыл бұрын
Thanks!
@JayzBeerz
@JayzBeerz 3 жыл бұрын
@@AustinV I just bought this keyboard today. Thanks for the video once again.
@AustinV
@AustinV 3 жыл бұрын
Awesome! Lmk how you like it. Did you get the hotswap version?
@JayzBeerz
@JayzBeerz 3 жыл бұрын
@@AustinV yes. I’m using the K6 right now till the K8 arrives. I’m a noob so I hope I can mod it to sound real good.
@AustinV
@AustinV 3 жыл бұрын
Good luck! I think you’ll be fine. It’s just tedious work. Nothing too difficult
@bltelysian
@bltelysian 3 жыл бұрын
I have the Kemove 61 Snowfox and I've kinda wanted to get a tkl... This seems perfect
@ettiennevanloggerenberg8164
@ettiennevanloggerenberg8164 3 жыл бұрын
The Keychron RGB is the best I have experienced.
@GoTravisCollins
@GoTravisCollins 3 жыл бұрын
Thanks so much much for this video it is amazing! I did want to let you know it is possible to remove the board without removing the switches first. Just need to remove keycaps and screws. Then run a budgie under the edge to pop the board out. It is a little bit harder to line up the BT and Mac/Win switches this way but cuts the time down drastically!
@AustinV
@AustinV 3 жыл бұрын
Ooh thanks for letting me know! I was planning on removing the switches anyways because I was going to lube them
@GoTravisCollins
@GoTravisCollins 3 жыл бұрын
@@AustinV No problem. That's what I figured since you said you were lubricating the stabs too.
@arbi0324
@arbi0324 3 жыл бұрын
Great vid, thanks! Would you say the foam that came with the kb enough, or is the neoprene foam mandatory? Does that just make it more snug inside the case?
@MrSolidtiger
@MrSolidtiger Жыл бұрын
I’m enjoying my K8. Not is it my first mechanical keyboard, but it’s my first JIS keyboard 😁
@andrea_9201
@andrea_9201 6 ай бұрын
Wow great video! I was doubtful about getting this K8 due to that hollow sound, but after watching your video I'll definitely get it, seems simple to do. Thanks! Btw, what's the material of the second foam you used, the thicker one?
@myroslav6873
@myroslav6873 9 ай бұрын
It sounded better without the foam, imo. Thanks for the vid.
@chrisshaw451
@chrisshaw451 Жыл бұрын
Just bought one of these, wish my K8 RGB lighting was as bright as this one, mine must be at least half this brightness.
@wahyuramadhani6685
@wahyuramadhani6685 3 жыл бұрын
nice review
@AustinV
@AustinV 3 жыл бұрын
Thanks!
@gmemes9023
@gmemes9023 3 жыл бұрын
This video is the reason why i got this keyboard. Also, what music/tracks did you use?
@convert313
@convert313 3 жыл бұрын
muuuuch better with the foam , what a beast . more than worth a sub.
@AustinV
@AustinV 3 жыл бұрын
Thanks so much! Appreciate the sub! Totally agree about the foam
@convert313
@convert313 3 жыл бұрын
@@AustinV So just to recap with ya Austin,i was searching high and low for a keyboard to replace my corsair k70 which I'm currently in the throws of returning "pain in the ass" ,umm for some reason it just bricked on me bar the volume wheel,I was researching keyboards "wasn't too fazed on the wireless option " I did however want USB pass through and a sound wheel BUT! i dropped that instead of going for a USB 3.0 hub and then relying on the volume key functions from the keyboard, received my keyboard YESTERDAY , had to get the plastic model all aluminium versions with the optical browns were sold out , blue is just too noisy and reds i cant hear the keys being pressed "there is a sweet spot and its the browns" so as soon as i got it back home popped the keys ,i glued my foam and i double layered it ,put it all backed together read the instructions changed the F key functions BOOM DONE!!! , excuse my language but this is a fuckn dope keyboard "you practically sold me this keyboard " the sound typing on it the way it feels the look!!! it clean without any wires that k70 had two USB cords THICK ones , this is a beast!!! ,I'm debating on swapping the key caps I'm not sure yet , Bluetooth was a bitch maybe too much interference i dunno I'm using a Bluetooth 4.0 adapter maybe that's it ,my issue was it was just not recognising the inputs after being connected now it is but it was a nightmare for some reason ,I'm swapping up to a Bluetooth 5.0 this week anyway , i recon keychron owe ya one on that review .
@convert313
@convert313 3 жыл бұрын
@@AustinV My shift question icon works instantly by the way , take your keys off and see if the left portion of the bard is completely screwed down 'i had a problem with the delete and enter keys not registering properly so i opened it back up unscrewed everything took the board out of the housing aligned everything perfect and the screwed each screw down whilst using my index and thumb to press down on the board hard while screwing the screws back in "it sounds like either your shift or your backslash /question mark key isn't screwed down enough to make proper contact with the board,don't be scared to press down hard either the back splash is firm asf ' i doubt its going to hurt anything
@AustinV
@AustinV 3 жыл бұрын
@@convert313 Glad you like the board! Thanks for the tip
@convert313
@convert313 3 жыл бұрын
@@AustinV its dope!!! So good man .thanks for the mod and review, i dont rhink i would have been this happy with the logitech g915 tbh ortho its a nice looking board with great functions i think for the price the k8 kills it. Plus its got bluetooth 5.0 and can be multi paired and 4000mha battery ,the anne pro 2 only has 1900 mha bluetooth 4.0 same qs the ducky one , and i didnt like the hyper x looks cheap and the Roccat Vulcan is over priced ridiculous!!! , again the k8 is the best fricken keyboard for the price ,man! Hats off sir.
@firebreathingb1tchqueen
@firebreathingb1tchqueen 3 жыл бұрын
man, ur channel should have more subs.
@AustinV
@AustinV 3 жыл бұрын
Thanks! Appreciate the love!
@hopeanudon3985
@hopeanudon3985 3 жыл бұрын
you definitely deserve more subs! and i just subbed today. I'm seriously thinking of buying this or GMMK. I want to try the hot swappable market. But im kinda cautious about the 3 pin ports that gmmk have. they said clipped 5 pins have bad stability. any advise you can give? you can also suggest better ones if im missing some. drop shift is kinda expensive tho. Thank you so much!
@AustinV
@AustinV 3 жыл бұрын
Thanks! Appreciate the love! If you're only concerned about the hot swap part, I would definitely say that 5 pin support is very valuable. Switches that have had their pins clipped only have stability concerns if you go plateless or have a plate with large cutouts that accommodate multiple switch layouts. Basically, it will only be a problem for switches that don't clip in to something, which is actually a problem I have faced when putting my clipped switches in another board. Lmk what kind of layout you're looking for and I can try to recommend some boards
@JasonJia11
@JasonJia11 2 жыл бұрын
I actually got this keyboard for free; it was delivered to me by accident. I'm assuming it was a logistical error from Amazon. I'm new to the MK community, this is the perfect chance for me to learn a new hobby!
@iJansport
@iJansport 3 жыл бұрын
I may be the only one but I really like the hollow sound this board has stock. I bought one and swapped to cream switches for that slightly heavy linear feel.
@AustinV
@AustinV 3 жыл бұрын
To each their own. At the end of the day, it's all preference. I prefer the more solid sound because I think it sounds more premium. Oh I've actually been trying to get some creams myself. Did you get them from the last novelkeys restock? The only linears I have atm are the silk yellows.
@iJansport
@iJansport 3 жыл бұрын
@@AustinV yeah when I ordered my keyboard they had plenty of stock on the novelkeys website. I would like to eventually lube them when I get some time and the supplies.
@AustinV
@AustinV 3 жыл бұрын
@@iJansport Ah gotcha!
@asduhaisjdjasd
@asduhaisjdjasd 3 жыл бұрын
1:00 this board has the gateron browns which are the "tactile" version glarsman is proud
@ashmuryode2389
@ashmuryode2389 3 жыл бұрын
great video I prefer case foam it feels more punchy sound
@AustinV
@AustinV 3 жыл бұрын
Thanks! Agreed
@Dan99
@Dan99 2 жыл бұрын
What lube do you recommend for this keyboard? Also, what size are the hex screws on the side?
@luisoregel6582
@luisoregel6582 3 жыл бұрын
Nice video Austin! where do you buy the neoprene foam and are you using any glue to add it to the base? you think the foam that keyboard package includes can be enough? Thanks for sharing an amazing video! new sub
@AustinV
@AustinV 3 жыл бұрын
Thanks for the sub! I got mine from amazon: amzn.to/3crdD6J You prob wouldn't notice too much of a difference if you didn't use the neoprene but I decided to anyways since I had it on hand. No glue required
@MrCmdCool
@MrCmdCool 2 ай бұрын
Why is the position of the recording microphone between the non-modded and modded version different?
@arcos9344
@arcos9344 11 ай бұрын
Hi there... I've been thinking of getting a Keychron Keyboard for sometime now, but there's just one thing bugging me, the default keycaps by Keychron don't allow backlight to shine through...can you tell where did you get the keycaps from?? And keep up the good job... great video
@asolt14
@asolt14 3 жыл бұрын
Ily so much u found me a keyboard:)
@AustinV
@AustinV 3 жыл бұрын
@athayanaufalmunandar6632
@athayanaufalmunandar6632 3 жыл бұрын
I cant believe that your subscribers under 100k tbh.. great video man! Can i use tealios v2 switches to this keyboard? loving ur content! subscribed also
@AustinV
@AustinV 3 жыл бұрын
Hehe thanks! Yeah tealios switches will work on this board. Although with the cost of tealios switches, they might cost as much as the board itself 👀 Appreciate the sub!
@athayanaufalmunandar6632
@athayanaufalmunandar6632 3 жыл бұрын
@@AustinV thanks for the answer! hightly appreciate it.. can you add me on discord?
@AustinV
@AustinV 3 жыл бұрын
@@athayanaufalmunandar6632 My username is Austin V#4035 but I'm not really that active on discord
@julianneli6142
@julianneli6142 2 жыл бұрын
Thanks for video! Im in the process of modding my k8 but dont have the screwdriver to remove the hex screws. What size screwdriver did you use for this?
@heyimnoob8831
@heyimnoob8831 3 жыл бұрын
Oh waw..that make much better sound... I should do this to mine ..i just bought it last night.🤠
@heyimnoob8831
@heyimnoob8831 3 жыл бұрын
Thank you for making this video!
@ForestBende
@ForestBende 3 жыл бұрын
Damn this video is quality!
@AustinV
@AustinV 3 жыл бұрын
Thanks so much!
@ForestBende
@ForestBende 3 жыл бұрын
@@AustinV no, really you deserve some attention. Is it okay if i shout you out in the future?
@AustinV
@AustinV 3 жыл бұрын
@@ForestBende That would be amazing! I would appreciate it so much! And thanks for the kind words as well!
@ForestBende
@ForestBende 3 жыл бұрын
@@AustinV I promise you you'll have 10k subs in a year 😉
@AustinV
@AustinV 3 жыл бұрын
Haha thanks! One can hope 🤞🏻
@StayReal02
@StayReal02 2 жыл бұрын
@4:42, I know that you mention "Neoprene foam", but if you don't have, can you then use mouse pad or something?
@Cabbajj
@Cabbajj 3 жыл бұрын
The quick brown fox jumps over the lazy dog.
@arturia5976
@arturia5976 3 жыл бұрын
Hey thanks for the great vid. Quick question - the 1/2” of empty space is from the bottom of the screw posts to the wings or from the bottom of the screw post to the top of the screw post?
@AustinV
@AustinV 3 жыл бұрын
It's from the bottom of the case to the top of the wings
@triadwarfare
@triadwarfare 3 жыл бұрын
What was the second foam that was added. There was a 1/8 neoprene foam, but the second foam layer was unlabeled and doesn't look like the material from the first
@daogpickle3159
@daogpickle3159 3 жыл бұрын
When taking the pcb off is it necessary to take the switches out or can you just pull it up without flipping it over
@khanhgia6817
@khanhgia6817 2 жыл бұрын
What type of foam that you added after the Neoprene foam?
@jarellchxn7134
@jarellchxn7134 3 жыл бұрын
is there a video of how u lubed and put case foam in it
@benmagnus0858
@benmagnus0858 2 жыл бұрын
which kind of screwdriver do I need for the sidepanels?
@ggsmrdoink
@ggsmrdoink 2 жыл бұрын
if i put kailh speed silver switches in it or gatron yellows will the rgb still go through im very concerned about getting either of those switches as i still want the rgb
@chromenut7759
@chromenut7759 2 жыл бұрын
How do you know if the one you bought is hotswappable? Also, how do you hotswap? (my first mech key btw)
@karudero575
@karudero575 3 жыл бұрын
what size screwdriver did you use for the aluminum frame? I can't find the right size for the life of me
@edwardelric.
@edwardelric. 2 жыл бұрын
is it advisable to just use the case foam? because i dont think we have neoprene foam.
@samferrer5652
@samferrer5652 3 жыл бұрын
hi can i ask how to take a printscreen on it? mine is directing to mail when i press the crop button
@raf.nogueira
@raf.nogueira Жыл бұрын
I really want to know is possible to change the switches and use Akko ones for example ? Do I will lose the RGB functionality ? The LEDs are inside the board or embbed to the Switches ?
@hendystark8333
@hendystark8333 3 жыл бұрын
i plan to get this for my first mechanical keyboard, is the rgb programmable?
@xerexon2k
@xerexon2k Жыл бұрын
Just wanted to buy a premium keyboard, how the .. did I end here! now it's science.
@juuliano1383
@juuliano1383 3 жыл бұрын
Awesome vid man! How do you lube your switches? Do you use a switch opener?
@AustinV
@AustinV 3 жыл бұрын
Thanks! I have a video about how I lube switches here: kzfaq.info/get/bejne/m5lyibZ-ub2Yo30.html But yeah I use a switch opener to open up teh switch. Then I lube the rails on the bottom housing and also lube the stem. I don't lube the legs of the stem if they're a tactile switch and the lube you use is up to you.
@tieshn
@tieshn 2 жыл бұрын
How do I disassemble it if I have the plastic version?
@ashved97
@ashved97 Жыл бұрын
Can you please let me know which keycaps did you use?
@richard-mai
@richard-mai 3 жыл бұрын
Hi, is there room between the plate and PCB for foam?
@AustinV
@AustinV 3 жыл бұрын
Yup!
@AverageAcc
@AverageAcc 2 жыл бұрын
Alr thanks so much:D
@kirti3839
@kirti3839 2 жыл бұрын
hey idk if anyone can help me here, but I lost one of the hexscrews while modding the board. can someone tell me what size they used?
@kingsargonii6939
@kingsargonii6939 3 жыл бұрын
Great in depth video. BTW. What song was being used?
@AustinV
@AustinV 3 жыл бұрын
Thanks! The song is Branch by Lukrembo: kzfaq.info/get/bejne/rrZ_rJWh0K_RmYk.html
@Soei23
@Soei23 3 жыл бұрын
I recently got my K8 (aluminum plate with Gateron browns) and they sound a lot different without any modification compared to your vid. The stabilizers are awesome compared to many other keyboards I own and even the Gateron browns sound and feel lubed. The RGB on my keeb does seem to be less bright than in your vid though, not sure why that is. I did turn up the brightness to max. Overall this is a great keeb for a very affordable price point capable of 3 & 5 pins switch support.
@AustinV
@AustinV 3 жыл бұрын
Oh so how does your sound? I agree on the stabs, very nice and smooth for a budget keeb. Hmm maybe my RGB showed up better because I dimmed my lights a lot? Yeah having 5 pin support was a huge plus to me
@Soei23
@Soei23 3 жыл бұрын
@@AustinV They almost sound like a Havit low profile keeb. There are only two. Full size and TKL which I happen to both have. Even though the switches in those are low profile gateron blues. The gateron browns reminded me of them. Perhaps because the actuation on the browns felt like it was higher up. Plus the sound and the feel of the browns is quite subtle same as the Havit keebs. As for the lighting, I’ve used a GMMK full sized in the same room before whose RGB seemed stronger. It could be that the drab grey caps (why on not flat earth did they choose that colour???) dims it more at the office? Will be swapping both the keycaps and the switches at some point. But right now I am liking it more and more each day.
@AustinV
@AustinV 3 жыл бұрын
​@@Soei23 Oh I've never seen a havit board in person before. It's interesting that your brown switches sounded clicky enough to be comparable to the blues in the havit tho. I think the caps are tolerable at the price point, but def would not say they are great looking. Also, it could possibly be related to the power. I am aware that the longer the cable, the dimmer your LEDs would be, even with max brightness because the power just can't travel at full strength that far. So it's possible they lower the max brightness on battery power and the stock cable just isn't good at delivering enough power to the board. Just a theory. Glad you're liking the board though
@Soei23
@Soei23 3 жыл бұрын
@@AustinV Hi Austin, just to clarify. The low profile blues from the Havit have a subtle click, the sound of the Gateron Browns are subtle as well. So one IS clicky and one isn't but both are very very subtle. See this link for the Havit full sized: www.amazon.com/Mechanical-Keyboard-Extra-Thin-Switches-HV-KB395L/dp/B074QM6F7X/ref=sr_1_1?dchild=1&keywords=KB395L&qid=1603872887&sr=8-1 The TKL has a blue backlight only.
@luiscaldera5897
@luiscaldera5897 3 жыл бұрын
Awesome vid man! May I ask how were you able to switch the esc key to grey?
@AustinV
@AustinV 3 жыл бұрын
They give you some extra keycaps in the box, so I swapped it out off camera
@vatal5410
@vatal5410 3 жыл бұрын
Subbed, you deserved it
@AustinV
@AustinV 3 жыл бұрын
Thanks so much! Appreciate the sub!
@Two_Cat_Dad
@Two_Cat_Dad 7 ай бұрын
What keycaps are you using?
@cotso
@cotso 3 жыл бұрын
Hi, awesome video man. Does this keyboard have a printscreen key?
@AustinV
@AustinV 3 жыл бұрын
Yeah the 3rd button from right on the top row should be the print screen button. I'm on Mac so I can't really verify but that's what I've seen on forums
Which One to Get? Keychron K2 vs K6 vs K8 Comparison
20:28
Switch and Click
Рет қаралды 552 М.
Make your keyboard THOCK for $3.
13:25
Hipyo Tech
Рет қаралды 1,4 МЛН
DELETE TOXICITY = 5 LEGENDARY STARR DROPS!
02:20
Brawl Stars
Рет қаралды 19 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:19
CRAZY GREAPA
Рет қаралды 13 МЛН
🍕Пиццерия FNAF в реальной жизни #shorts
00:41
Khóa ly biệt
01:00
Đào Nguyễn Ánh - Hữu Hưng
Рет қаралды 19 МЛН
Rise and Fall of the Keychron K2
8:15
Switch and Click
Рет қаралды 969 М.
To CLICK, or not to CLICK? Keychron switches comparison
6:04
Corey Staden
Рет қаралды 439 М.
why is this weird keyboard so good?
18:35
pinguefy
Рет қаралды 9 МЛН
Why Pay $1000 for a 25 year old PC! - NIXSYS Windows 98 PC
18:32
Linus Tech Tips
Рет қаралды 2 МЛН
The force break mod is basically magic
11:34
Andy V Nguyen
Рет қаралды 146 М.
7 Ultra-Budget Keyboard Mods to INSTANTLY Improve your keyboard
13:35
Switch and Click
Рет қаралды 339 М.
Разряженный iPhone может больше Android
0:34
МОЩНЕЕ ТВОЕГО ПК - iPad Pro M4 (feat. Brickspacer)
28:01
ЗЕ МАККЕРС
Рет қаралды 84 М.
#miniphone
0:16
Miniphone
Рет қаралды 3,2 МЛН
One To Three USB Convert
0:42
Edit Zone 1.8M views
Рет қаралды 440 М.