No video
KFI PRO POLY PLOW 66" RZR S 900 INSTALL AND TEST
Рет қаралды 19,246
Күн бұрынinstalling a KFI pro poly plow on my rzr s 900 (MADE IN THE USA)
@tomviel4049 Жыл бұрын
How is the plow holding up? The push plates holding up ok that you installed underneath? And do you remove the push bracket for riding season to prevent any damage and leave the first plate on? And where did you order the plow from? Thanks…
@LittleMan_LittleTractor Жыл бұрын
exactly right, its a two part plate system, the one that sits fairly flush with the skid plates has threaded holes that you bolt the actual push plate too. so far so good!
@tomviel4049 Жыл бұрын
Just installed a 72” kFI poly on my 900s. Rzr. Plowed once. 4” of heavy wet stuff… I added a pvc pipe to the cutting edge. So nice all my plowing is on dirt. I was impressed on how well these machines do!!! Thanks for your video and input. Happy New Year!!!
@Fenrir133 Жыл бұрын
Did you have to beef up the suspension at all?
@jaredmayer8837 2 жыл бұрын
How do you adjust the angle of the plow?
@LittleMan_LittleTractor 2 жыл бұрын
There is a spring loaded hand that you pull when the plow is raised. Simply pull the handle and push the plow to the angle you desire!
@tomthetruckguy5283 2 жыл бұрын
Lock tite not required on the bolts?
@LittleMan_LittleTractor 2 жыл бұрын
That is correct, comes with nylon lock nuts!
@kennethhurlbutt802 Жыл бұрын
🤓
Fabiosa Best Lifehacks
Рет қаралды 19 МЛН
RECYCLED RECREATION
Рет қаралды 2,6 М.
Fabiosa Best Lifehacks
Рет қаралды 19 МЛН