Stereo Pad in Tucson Az

I haven't installed them yet. When I do I'll be pulling a switched ignition source with a relay for turn on with 8ga wire.

@badazcustoms what's the name of the switch? Your running 8guage wire to the ignition turn on?

I'm actually still looking into how I'll be doing this connection. I'll be running 6 amplifiers and I'll more than likely be going into my first amp with 12ga wire off of the relay then out of the first amp with 8ga and into the second with 8ga and so on until I get to the last amp all with 8ga wire. So a heavy 12v switched ignition off the steering column into a relay, out of the relay with 12ga into the first amp, then out of the first amp with 8ga and continue doing this with 8ga till I get to the final amp. Keep checking my channel for new videos.👍👍

If I don't use a switched ignition off the steering column I'll just use the remote turn on from the back of my head unit and do the rest of the connections the way I explained in my previous response. I hope this helps you out. But either way will work fine as long as you have the relay in place. You have to use a relay for multi amp application.

I spoke with kicker..they said it doesn't have to be 8awg . They was just tryna match the size of the 0 guage wire.. How big is your alternator that you running these things