▶ READ the step-by-step: bit.ly/3hu6AwI
▶ SUBSCRIBE to the email: bit.ly/3olTVA8
▶ SCHEDULE training: bit.ly/32WFc71
▶ REPAIR KITS: bit.ly/3IGAsSw
=====================
- PODCAST: bit.ly/3opVNYu
- FACEBOOK: bit.ly/3glO619
- LINKEDIN: bit.ly/3guGyZL
- PRODUCT & TECHNICAL SUPPORT: prodtechsupport@kimray.com or 1-405-525-4264
- CAREERS @ KIMRAY: bit.ly/32Ynz6R
=====================
0:00 Intro
0:16 Disassembly
1:28 Pilot housing
1:57 Lower seat
2:18 Upper housing
3:18 Removable Seat
4:17 Lower housing
5:15 Filter
5:51 Diaphragm plate assembly
6:28 Reassembly
6:38 Inspection
6:55 Removable seat
7:42 Lower housing
11:25 Upper housing
12:47 Filter
14:11 Diaphragm plate assembly
15:01 Pilot housing
16:19 Bonnet and tubing
=====================
Learn to disassemble and reassemble the Kimray Back Pressure Regulator. Over time, the internals of the regulator experience wear and tear that can affect production processes, so it's necessary to disassemble and replace key internal parts with a Kimray Repair Kit. In this repair video Jason Andrews will show you how to disassemble, examine, and reassemble the Kimray Back Pressure Regulator.
=====================
Kimray's Back Pressure Regulator is a staple in oil and gas production. Numerous oilfield applications, including on separators, flow treaters, free water knockouts, compressor stations, and gas gathering systems use it.
Control pressure upstream of the valve by adjusting the set point to the desired max upstream pressure. Used on separators, flow treaters, compressor stations, and gas gathering systems.
Leave a comment below if you have any questions! Some question can be answered online, but for detailed technical support, email prodtechsupport@kimray.com and mention which video your referencing.
---
Music by www.hooksounds.com