Still doesn't have an uninterrupted full shot of the door opening. I get the aesthetic you are going for here, and this is an amazing project, but the cuts are just too jumpy and close up for me to get a full appreciation of the work you are doing here. My personal preferences notwithstanding - fantastic craftsmanship.

Check pinned comment to see it fully operating, thank you!

Thank you! And I have a few, I definitely need to use them more.

Man this means alot to me, Pedulla is one of if not my favorite woodworker currently. I really appreciate the kind words.

@Yarmles you can tell! The man is a wizard. We should all aspire to be that creative and talented.

Thanks for the feedback, I will keep that in mind 🙏🏼 I do also agree with the milling glueing part being banal, it was just so much of the process on both of these builds. I started making videos 3 weeks ago so I am new and still learning haha. Appreciate yuh!

Very cool build. Any plans or can you say where you got them? Also, with exotic woods acetone them before glue ups. It helps remove oils and will yield better results.

@@patriotwoodworker6092 Appreciate it, and thanks for the tip. Theres quite a few videos of people making them on here that I watched years ago and then went to the shop and figured it out from memory. I haven’t made drawings of these ever unfortunately. The jist of it is the doors have to be the same size and both be squares. As long as you follow that you should be good to go. I am however going to make a condensed version of this video soon with alot of details on sizing and such.

Many thanks 🙏🏼

Drinking the cheap stuff makes you appreciate the finer stuff that much more 🤌🏻

Far from a master but I am trying hah

Very kind of you 🥃

Indeed it is! Big purple heart guy over here, my latest video has a decent amount of it in it too.

Very kind, thank you.

Thank you, appreciate it!

I got some ideas brewing, thanks for the support Jim!

Im baffled someone on another continent is enjoying my video haha, greetings and thanks for the love, it means alot 🍻

Hey thank yuh 🥃

Hey thanks, I am trying to keep it semi original haha

Appreciate that, the redbreast was my inspiration 🥃

Cant beat the purple and brown combo, appreciate it bud!

Thanks Jt

It loves you too

Thank you, Im glad you enjoyed it!

Thanks for the animation man!

Imagine the possibilities if I actually knew what I was doing with a camera!

Pls don’t eat glue

I have a long way to go when it comes to editing but I appreciate that ❤

You’re definitely ahead of the game! I agree, the edits were really well done!

I appreciate that!🍻

Thank you Arron with 2 R’s

You have plenty, 50 or 60 more and you’ll have the perfect amount.

Appreciate that, give it a shot!

Someones been reading his thesaurus 📚

Your sobriety disagrees

Thanks brad, appreciate the kindness

Appreciate it, and no disrespect intended 🥃

Thanks brother!

I’ve seen a few, it’s a hard color to work with so I can see why. And thank you, I appreciate the kindness!

@@Yarmles A hard color and a hard wood. I used Purpleheart in a project about two years ago and let's just say I broke more boards than I used. But in the end the project was a success.

@@jeffreyjennings1640 what did you make?

Welcome aboard 🍻

Appreciate the kind words, and we all take a risk here and there I am sure even if it’s not smart move, makes you feel alive!!

@@Yarmles oh, absolutely.

Hey thank, I appreciate that. I’ve thought about it but the reveal between the top and bottom doors has to be there for them not to bind when opening and I think it looks better if all the reveals match personally.

High level amateur**

Thanks a bunch, I appreciate the kind words! As far as the magnets go I used to use 6 but that was overpowered, I went down to 2 at one point and that wasn’t enough, 4 is just right considering there is a bit of leverage involved once the door is mounted and vertical.

Love me some lofi 🙏🏼

Means alot, thanks scott 🙏🏼

It’s a full body suit actually

Many thanks 🙏🏼

Appreciate the kind words, and noted about the letter sizing, I agree. Also, each episode is a new piece of furniture being built start to finish making this episode 2 of my Full Build series/playlist. Again thank you, appreciate it 🙏🏼

Just pinned a comment with a short of it operating, my bad.

@@Yarmles awesome! It's like magic. Watched the short on loop quite a few times.

Amen 🥃

It’s purple heart! I should probably put that in the title huh?

@@Yarmles , or the description. Nice eye-catching accent on the finished product. Looks great with the brass dowels.

Thanks, I had some left over from the last video figured why not use it here.

Idk honestly, I imagine it would still stop once it got through the glove.

😅

Hey now, there’s some festool in there 😅

I do not have plans unfortunately, I make these from memory and I figured out how to make them by trial and error in the shop

I don’t have plans written down unfortunately, just figured this out on the fly a while back and have been rolling with it ever since. Maybe one day I will get someone to make detailed drawings for others.

Appreciate the support Jose! The measurements on this one are 12”(wide) 24”(tall) 7”(deep). I usually go 4” more in height 2” more in width but made this one smaller for myself.

@@Yarmles thanks

What do you mean?

@@Yarmles just saying your work is magical.

@@weirdlyhungry appreciate that man, thank you!

I believe it was 8.50 a LF for a piece that was surfaced 4 sides and 6” ish wide, hard to remember, it’s been a minute.

@@Yarmlesoh ok because I just paid 15.99 at rockler but it was board foot. LF is linear foot I’m assuming

@@nonplayablecharacter4815 yeah LF is linear foot, realistically I paid about $17 a board foot here.

@@Yarmles yea makes sense. Great work by the way. I also seen your Nintendo one that one was very cool too. I liked the idea of the rug material you glued to stop from scraping

@@nonplayablecharacter4815 appreciate it man! Got a new video coming out tomorrow morning of something that I hope tops those two!

Gap between the doors needs to be there, I intentionally keep the gaps between the panels so it’s cohesive. You should give it a shot with some soss hinges.

@@Yarmles the gap makes sense but i see no reason you shouldn't be able to use hidden barrel hinges or even regular hidden hinges and create the gap based on the depth you route them out? Without testing it, no way to know for sure.

Check pinned comment for larger shots to see the door in full

Check the pinned comment, I put some links to some shorts of it operating! Thanks for watching!

It's pretty obvious what he's doing he showed all the steps. If you can't copy this from the video then you need woodworking lessons before attempting something like this. Maybe stick to making cutting boards.

This is not a “how to” channel nor was this a guide on making kinetic doors. This is exactly how I intended the video to come out, a satisfying build to relaxing music. I do plan on making a condensed version with foot notes at some point for those who wanted some details.

@@apmadeithappen2 lol, you’re funny. So hostile and immature of you! Anyways, opinions vary… I’ve been a woodworker/furniture maker for over 30 years. I would have no problem recreating that cabinet, but not everyone is so experienced. I think it would be a more beneficial video, (for even relatively new woodworkers), if a better explanation/dimensions, etc. was provided. I was very kind with my criticism; you unfortunately don’t possess the same ability or tact. Explains why you call yourself the bestSHITTYphotographer. Have a good day sir. 🫡

@@Yarmles And I respect that, I am just not a fan of silent videos… that’s just me, (and I’m entitled to my opinion). I didn’t leave a comment to offend you. Like I said, I think you showed great workmanship, and I think your cabinet is very cool. People are just so sensitive these days. You hear the criticism, but ignore the compliment. If I ever watch and comment on another of your videos, I’ll be sure to walk on ice. Enjoy your day.

@@timdoyon1964 no egg shells, I appreciate your feedback and thank you for the kind words.

I appreciate the sentiment Ron, I started making videos and uploading 3 weeks ago so I am still new!