And also worth mention that if you push/pull you need to shoot the whole roll of film on that ISO setting.
@GeoffreyEduard4 жыл бұрын
If you are actually pulling the development, yes you're definitely right. But I do the same, I always rate TriX or Portra lower then the actual box speed, which is basically a compensation for not metering for the shadows. And I do change the iso or exposure comp to bracket a shot that I really like. So when you don't pull the development, you can change your setting per frame.
@punkrachmaninoff4 жыл бұрын
🧐 actually, this is not always true... personally i develop my b+w using a semi-stand process with a lower dilution ratio. in spite of the pervasive thinking on this subject, this method of development doesn't require that you change development times or shoot the whole roll at the same ASA/ISO setting to get consistent results. ✨🎞️📷
@rcraigbateman3 жыл бұрын
So you cant use compensation?
@dmitrywagstaff3 жыл бұрын
Thank you!
@idrisrabdullah2 жыл бұрын
I would say this isn’t true I change my iso multiple times throughout shoots
@woohoo02374 жыл бұрын
I think it will be easier to digest by understanding the exposure triangle. Push to higher ISO = Underexposed and Pulling to lower ISO = Overexposed. Higher ISO allows a faster shutter speed/ smaller aperture setting. Lower ISO allows slower shutter speed/larger aperture. Besides the desire of shooting in particular shutter speed, using expired film or want to create a unique film look ( grains and tone) can also be the reason for doing pulling or pushing in film photography.
@jameslane38464 жыл бұрын
I disagree that pulling isn't needed. If you're shooting high contrast scenes and you don't want the high contrast then pull. If you need that tiny bit extra dynamic range, pull. If you want less grain, pull. I always pull Pan F+ 50 by a stop to get beautiful tonality and no grain for example
@KingJvpes4 жыл бұрын
James Lane I’ve yet to try that! Thank you for this comment, I’ll be experimenting more in the future
@zhongyao-sc1lj2 ай бұрын
if I need deep sky and white cloud,pull or push?
@GeoffreyEduard4 жыл бұрын
Hey man, great video again. But you forgot to mention one very important thing about pushing. The film is obviously not as sensitive as a film that is two stops more sensitive. And this will express itself in the low brightness regions like the darks and shadows. Those were simply not exposed enough to pull detail out of it. Dark stays dark. So generally it creates a much more contrasty look. And this is why pushing is not "seeing" in the dark. We're actually pulling detail from the mids en highlights. A side effect of film that is not being exposed correctly is grain, which can also be a desired effect like the contrasty look.
@KaptainKerl12 күн бұрын
it's funny how you explain pushing by using the term "pulling"
@Jerry10939 Жыл бұрын
I try not to push film unless I have to. I try to have the right speed film for the shoot. I have more slow speed film like 100 or 125 . Some 400 and a roll or two of 3200. When I worked as a photographer I usually carried two cameras. One loaded with 125 speed B&W, the other with 400 B&W or Ektachrome slide film usually 100 speed. I also had a third backup camera that was full manual only.loaded with the primary film I needed for the shoot. Usually 125 speed. Only a few shoots did I need the 3200 speed film as my primary. Sometimes I went slower at 25 speed. But I didn’t pull the film. I used Agfa 25 at the time. You use that film for the extra fine grain. It has great tonal range and makes extra large prints. Poster size or even mural size pictures. It’s not just the speed and versatility but the grain. The faster the film the more grain. Sometimes you want a grainy effect. I didn’t worry about developing for contrast. I can control that post production with the photo paper uses. Paper like film is rated. But for contrast. The lower the number the lower the contrast. You also have multi-contrast paper that uses filters on the enlarger to adjust the contrast. So unless you want grain use the slowest speed film you can for the photo shoot.
@ColinBloodworth4 жыл бұрын
Testing out a roll pushed led me to only want to shoot that film pushed. I only want to shoot Tri-X at 800 or 1600 now. Film is such a great journey.
@_parkphoto3 жыл бұрын
I think the one thing I was hung up on before watching this is that you gotta tell your developer that you pushed or pulled your film. That makes a LOT more sense now!
@dlarge65024 жыл бұрын
Its also useful if you have an old film. I once had a very very old roll of Kodak TMAX 1600 that after a bit of consideration and advice from my dad I pulled down to 800. Only 1 stop overexposure but it turned out great. Also if you are developing your own film yourself all you need to do is develop as the speed you pushed/pulled to according the the development times given for the developer. Pulling film usually has the effect of decreasing the appearance of grain, pushing increases it.
@bengreenbadger3 жыл бұрын
I generally pull HP5 by a stop in the studio, it gives me easier (flat) negatives to work with in the darkroom. You can always add contrast back to a scan or print in post.
@davidlanford4 жыл бұрын
I just got a roll of TriX pan 400 back from lab that had expired in 02/2000. I metered it at 100 and had in developed at normal settings. It all came out very well.
@maxtidmarsh80394 жыл бұрын
Honestly love your content. I'm just getting into it and this is saving me so much stress. Thanks man appreciating this channel
@litespeedga4 жыл бұрын
Love your videos! Most people on youtube love to hear their own voices past the point of overkill. You on the other hand get to the point with no bs or filler...keep the videos coming!
@BLicMediaCo Жыл бұрын
Man you went for the easiest way to describe this and you nailed it. Just discovered your channel today. Thanks a lot! Brand new to 35mm photography. Came from video background started on Hi-8. Picked up a Pentax K1000
@crwn_munkz4 жыл бұрын
Another reason to push is to get faster shutter speeds in low light situations. And not have to use your lens wide open
@issafilme4 жыл бұрын
Hey man, could you please explain a little bit more? I'm just starting to shoot my film at night!
@crwn_munkz4 жыл бұрын
@@issafilme well pushing your film will trick your meter to think there is more light available therefore you would be able to shoot at faster shutter speed to avoid motion blur. I recommend pushing if you ar shooting concerts or events. Also your developing time will change depending on how many stops you push your film.
@MrCh34 жыл бұрын
@@crwn_munkz this made me even more confused... I thought that if you set to 1600 this is a setting where its more sensible to light than 400. So why does the camera underexposes, why does the camera think there's more light available with such high ISO where it's used for night shots? Not bashing your comment, i'm honestly curious and confused
@derbert5463 жыл бұрын
@@MrCh3 Exactly what i was thinking
@lea47772 жыл бұрын
@@MrCh3 Setting your iso higher makes your camera assume you're using a more light sensitive film. Byou're not. Therefore with the faster shutter speed. Not enough light is let in. And the resulting images are underexposed.
@davidmcrae4791 Жыл бұрын
Great explanation. Can't wait to try pushing my 400d cinestill
@KimGonzalez-kt8uh Жыл бұрын
Can I just say, I'm extremely grateful for you. You've taught me so much about film and you are so good at simplifying things, THANK YOU.
@JacobCarlson4 жыл бұрын
Just pushed a roll of Ektar by 2 stops. I'm excited to see the results
@James0113 жыл бұрын
I think I just found the Peter McKinnon of film photography 🙌🏼😅 a question: why do people push film to under expose? Why don’t you just shoot 400 stock on 400 iso/asa and then reduce the exposure compensation by 1 stop on your Minolta x700? Film newbie here and would appreciate the advice!
@lidahart30563 жыл бұрын
I watched so many videos on pushing/pulling and this was the only one I understood, thank you so much!!
@NextScamdemic4 жыл бұрын
I've read about people taking advantage of Portra 800's wide exposure latitude by shooting at 400, then _pushing_ one stop in development. I'm gonna try this. I can attest to Portra800's wide latitude with some flash photos I was probably overexposed by a couple stops and some detail was lost in the highlights but overall they came out beautifully saturated
@user-ns3si7hw1t4 жыл бұрын
Flary Fox shoot 800 film at 400 it will be overexpose by 1 stop and you want to push it to make it brighter?
@NextScamdemic4 жыл бұрын
Naphon Tonitiwong Portra 800 has that wide a latitude and loves overexposure.
@Bulsie284 жыл бұрын
Something you should also keep in mind if its your first time pushing film make sure you check in with your local camera shop before hand because they might not be able to push your type of film in the developing process. I was about to try it with my Cinestill 800t but fortunately I called them first to get their input and they informed me they could only push black and white due to technical constraints. So moral of the story: Give your developer a heads up or you might end up with some Extremely over/underexposed photos!
@GiangHoang888882 жыл бұрын
u mean every single film has different developing process
@Bulsie282 жыл бұрын
@@GiangHoang88888 well yes but that wasn’t what I was referring to. I just meant that not every developers machines can develop pushed film.
@dominiclunn123 Жыл бұрын
Would really love if you could do this video again but with examples to show what the different levels of push/pull look like.
@loonathefoxgirl6375 Жыл бұрын
Best video on this. Thank you
@stephond.photography9867 Жыл бұрын
I had to comeback to this one. I just shot a roll of Porta 400 behind Gold 200 without adjusting my ISO or Shutter. Ok one stop is no biggie. I’ll process it like regular
@KingJvpes4 жыл бұрын
What’s your favorite film to push?! 🎞
@theoldcameraguy4 жыл бұрын
KingJvpes Tri-X!
@edrikpedraja4 жыл бұрын
Ilford HP5
@mmms0n4 жыл бұрын
Ilford HP5 🤟🏽
@TonyWodarck4 жыл бұрын
Love this. Thanks for explaining it for everyone. I shoot all my Portra 400 pushed one stop.
@annetteg43314 жыл бұрын
Thank you man! Finally someone to explain what this means and why people do it.
@Smarty246864 жыл бұрын
Wish you would explain how to develop pushed/pulled color film
@GregoryVeizades4 жыл бұрын
The same way as normal except you leave it in the developer longer. Check the manufacture TechSheets for the actual figures.
@Clubkabuki10 ай бұрын
You explained it well!!!
@randypipper924 жыл бұрын
I wanted to see examples :(
@KingJvpes4 жыл бұрын
Luis most of my black and white is pushed 2 stops!
@TonyWodarck4 жыл бұрын
All the shots in my videos are Portra pushed one stop.
@randypipper924 жыл бұрын
@@KingJvpes is worth pushing a Superia Xtra 400 to 800 so I can shoot at night?
@hi-ho76364 жыл бұрын
@@TonyWodarck woah I saw your profile in 35mm film photography fb group page damn lol
@scooterboy4234 жыл бұрын
The first time I pushed film, a Neopan Acros 100, I forgot to inform the developer that I pushed 2 stops. The results were very underexposed. Post processing with LR helped bring out the highlights and shadows but also resulted in very grainy pictures
@hardene88884 жыл бұрын
Awesome! Am planning to get a film camera but one step at a time haha ... if that day comes, i'll rewatch all your videos.
@JoelDagang4 ай бұрын
Super helpful, thanks!
@kyni874 жыл бұрын
Thanks man 😍 I needed a practical explanation
@Daguita3 жыл бұрын
Nice content, man! I'm learning also from the comments, haha! Your videos are a very good starting point for beginners to get the hang of many film photography concepts. Thanks!
@gottanikoncamera4 жыл бұрын
Good explanation. One thing though-you’ll want to consider pulling your film if you overexpose transparency film by as little as one stop given it’s decreased exposure latitude vs color print film, especially in the highlights.
@skel23334 жыл бұрын
So I have an Ilford fp4 plus (B&W ISO 125) and that ISO for me is so low I want to get more light into it, so I should shoot it like 50 Iso right? So my camera thinks the film is even less sensitive and my light meter guides me to overexpose, and when developed it'll have more light. In a nutshell if I want to simulate a more sensitive film for lower light conditions, I should pull to a lower ISO, and if I want to simulate a less sensitive film for conditions with a lot of light, push to a higher ISO right? Or am I dumb and should I do the complete opposite? Thank you for the video, but with some examples it'd be much easier to understand
@uandersonbrittes65264 жыл бұрын
Ok..got it..when pushing the film by 2 stops we should tell the developers about that so we.dont have underexposed pics. But this should not happen when pulling, right? If i pull my film, shootting a 400 film as a 200 film I do want that extra brightness, more details in my shadows and probably a little bit more of grain. So if i pull there is no need to tell anything about it to the guy at the lab. Am I right?
@benjaminvleugels56093 жыл бұрын
Pulling is useful in high contrast situations for instance if you are talking a photo inside by a window and want the outside also to not be blown out
@andraejulian4 жыл бұрын
BIG HELP!!! THANK YOU SOMUCH!
@mdlassel3 жыл бұрын
his helped alot thanks dude
@Seiji5044 жыл бұрын
Can you add example photos of you actually push/pull the film
@stephcoathupe3 жыл бұрын
These videos are so helpful omg. So, at the end when you talk about the fact that you shoot your colour film overexposed by one stop (eg. porta 400 shot at 200 iso), this isn't pulled because you still get it developed at 400? Whereas if you got that same film developed at 200 then it would be pulled... That's right isn't it?
@cameronkhalfaniherman24924 жыл бұрын
This was a great explanation of pushing and pulling film!
@Bobbziee4 жыл бұрын
Editing on a new level! I see you 👀 . Would’ve been funny if you actually pushed and pulled film.
@077nme3 жыл бұрын
Thanks man, keep this videos coming.
@justinwadefitness4 ай бұрын
What about shutter speed? Push film do you also have to compensate your shutter speed? So, for example, if you pushed 400 to 1600 would your shutter speed have to be 1/1600 ?
@gkokra4 жыл бұрын
Clutch needed to watch this right about now
@sxcastfilm4 жыл бұрын
Love your videos! I’m learning so much just from watching your videos. I was just wondering where do you buy your films??
@prelopuig Жыл бұрын
That's nice. You push to 1600 and later what do you do with the shutter speed? You have to lower it down? Thank you
@kimobugman2 жыл бұрын
Would love to see some examples, I can't wrap my head around it... but I'm a newbie.
@Oh_snap_jane3 жыл бұрын
Thanks for sharing your knowledge.
@jjjjjaaaacccoob Жыл бұрын
im new to film photography and i thought the title meant physically pushing and pulling film out of the canister 😹
@philipl65104 жыл бұрын
I pushed Portra 160 accidentally, I shot it at 400, I will be giving it away to develop soon, let's see what will be the results of that 🤙🏾
@philipl65104 жыл бұрын
@@mattmaberry It is pushing because I wouldn't even think of giving it away without mentioning the fact that I shot it at 400 ISO, that would be ruining a pretty good roll of "expensive" Portra, don't you think?
@philipl65104 жыл бұрын
@@mattmaberry it is obvious that the pushing and pulling of film occurs during the developing process and it is obvious that I have to let the lab know to correct for the fact that I shot the film at a different box speed! I've been doing this for a while now but thanks for your "explanation" .
@philipl65104 жыл бұрын
@@mattmaberry so let me rephrase my comment to satisfy your needs "I accidentally shot Porta 160 at 400 ISO, I will see to it that the lab push it to compensate for my mistake, I am looking forward to seeing the results", is this something you would like to read scrolling down the comment section?
@floyd78204 жыл бұрын
Can you push/pull by using the EV selector? Like keeping the film ISO but setting the EV +2/-2
@tsuikit5363 жыл бұрын
I have the exact question too.
@agataster29032 жыл бұрын
did you find out the answer yet?
@blakeaghili46812 жыл бұрын
So when we push in camera , should we tell the lab to pull ? I am confused 🤔
@dlarge65024 жыл бұрын
@kingjypes I'd love you to get hold of some infrared film, shoot it and develop it. Most older film SLR's will have special marks on the focus scale on the lens indicating the "correction" you need to apply when focusing. This is because infrared light focuses at a different focal point than visible light so you will see an out of focus image in camera but it will be in focus when developed as you only captured the IR light. Try shooting trees and people!
@Tetra842 жыл бұрын
So.. this setting for your camera meter to 1600 for +2 stops of 400 speed film is only if you’re shooting in Aperture Priority (A) mode correct? If you were shooting manual with 400 speed film pushed to 1600 you’d need to set your shutter speed to 1/2000 for sunny 16 correct? And if you were only shooting sunny 16 in manual mode, I’m guessing it would be irrelevant what your cameras iso meter was set to?
@gilbertbeltran15623 жыл бұрын
Good vid!
@openyourwebcamshowyourface Жыл бұрын
Why would you ever want to underexpose film? Won’t you just get less detail? And couldn’t you just change the brightness in photoshop if you want a darker picture?
@mjvielle Жыл бұрын
If you wanted more light sensitivity, why wouldn’t you just pull the film { 400 box speed to 200 } and then the lab develops it normally. But I guess for contrast the shooting with pushing and developing pulling creates the desired affect?
@key2adventure3 жыл бұрын
One more reason to push - the most important for me: I love the extra visible grain structure
@erikleypoldt82754 жыл бұрын
So is this the same as moving the exposure compensation dial to +1? And I leave it at 400 ISO?
@gregorybissell42554 жыл бұрын
Yes.
@gregorybissell42554 жыл бұрын
But you'll need to develop it longer, otherwise it's just underexposing your shots
@redmondartwork3 ай бұрын
3 stops would be 3200? Since i develop using monobath. 75degrees... 3.5 minutes. How much long would i have to leave it in the developer?
@natalietrusner85604 жыл бұрын
Thanks for the info! I’m still fresh in film and this will help with an evening photo walk this weekend.
@DarylCatholicArtist Жыл бұрын
Great video man! I have a question on this. What if different frames on a film roll has been set to different ISO values. Do you need to tell the developer to develop the roll as the box ISO or something else to compensate for each photo?
@eddiegee29402 жыл бұрын
The other pacific islanders photographers who are not your friends , do you give them props if their work is good?
Жыл бұрын
Thanks for sharing.
@martinmcchesney315 Жыл бұрын
So what about the cameras that don't have iso settings, for example my TLR ferrania elioflex has no iso settings 4 apperture settings and 4 shutter speeds I can't push film on this camera
@josephsabio2 жыл бұрын
What’s the difference between pushing your film by one stop with the developers and pushing your film by one stop by lowering the iso setting on your camera? Hopefully that makes sense. Over exposing with developers vs over exposing in camera.
@jasonthejman3 жыл бұрын
How do I set my meter if I overexpose by 1 stop? Let’s say i set my asa on my camera at 200 for a ultramax400/portra 400. Should i set my meter at 800? Not planning to pull it.
@AlexT12122 жыл бұрын
Great video thanks I’m still struggling to understand this If you need more light say, why not just set the shutter speed slower? The metre will say you’re over exposing but is that not exactly what happens by tricking the camera to think it has a different iso film, then using a slower shutter to bring the metre up? Or if you need a faster shutter why not just use a faster shutter and know that the shots going to be underexposed. Just the same result as pushing anyway right? It seem like over or under exposing your photo then in the developing stage, fixing this..is what creates the look? Not tricking the camera into what iso it uses. I’m guessing it’s so you can use the metre correctly? Even though the shot will not be properly exposed Confusing! 😅
@yoly70perez4 жыл бұрын
I learning a lot with you tnanks
@quentinsilver54916 ай бұрын
If I push it two stops do I also have to match my shutter speed? Or can I keep it at 500
@Jerry10939 Жыл бұрын
You have to have someone else develop your film, they have to be able to push it in the developing. Some use machines that you put the film in one end and it comes out the other. Some places say they can push film and charge more for it.
@takeapes114 жыл бұрын
Hi, Since I only shoot manually and meter with an app and put my settings in for every shot . Do I have to set the pushed ISO on the ISO wheel? I am not sure what the wheel does actually. Thank you.
@katerina91594 жыл бұрын
What app do you use?
@andreblum3 жыл бұрын
you don't have to. The only thing the iso wheel in your camera does is provide input to your built in light meter. If you do not use that built in light mater but use an external light meter (app) instead, and you manually adjust shutter speed and aperture based on that, your camera's iso setting can be ignored. When pulling, set the +1 stop on your external light meter (app).
@MTOPro5 ай бұрын
Do you have to push the whole roll
@GiangHoang888882 жыл бұрын
so if i push one stops in my camera, i can shoot normally with the right metering meter
@James0113 жыл бұрын
Why don’t you just use exposure compensation on your Minolta and under expose a stop? Is is that different?
@wtfYou2be2 жыл бұрын
I shot at 400 and then midway through i pushed to 800. Can this still be developed right?
@jarodgerber66114 жыл бұрын
In what situations would you want to push film and do you also mainly pull film for expired film?
@jamesonnorth4 жыл бұрын
If you can't get faster film and the entire roll is shot in that situation, you'd want to push. Kodak 3200 is really just 800 pushed I think
@graham_white4 жыл бұрын
@@jamesonnorth correct its just portrayed 800 pushed 2 stops.
@graham_white4 жыл бұрын
situations you would want to push film are 1. low light/ night so you don't have to shoot below 1/60th shutter handheld 2. a lot of people will push film to increase contrast in the film as well as the grain. this can also cause some color shifts. I recently accidentally shot a roll of porter 400 at 100 speed. so in development I just pushed it 2 stops to compensate. photos came out fine but are a little more grain than usually but nothing drastic. or if you only have 100 speed film and its super overcast outside you may want to push it a few stops so you don't have to worry about shutter speed and underexpose it. in comparison pulling film will do the opposite with color, contrast and shutter speeds. and generally you push expired film because overtime it deteriorates and requires more development to correct that.
@NextScamdemic4 жыл бұрын
@@graham_white "I recently accidentally shot a roll of porter 400 at 100 speed. so in development I just pushed it 2 stops to compensate" Wouldn't you want to PULL it 2 stops in development to compensate? Was that a typo?
@Station9.75 Жыл бұрын
Can you change your ISO mid roll or will that mess up the whole film strip?
@suchitgangurde35143 жыл бұрын
Hey King Jvpes, Nice video. I had a question for you. I recently shot a roll of Fujifilm C200 which had expired around 2 years ago at 250 ISO, effectively underexposing it instead of overexposing it (by using the half a stop overexposure rule), by mistake. If I get it processed normally without any suitable adjustment during development, what do you think the results might turn out to be? Or how should I ask the lab to process the roll so that the end result is not a wasted effort? Any input would be nice to learn since I am completely new to the pushing/pulling side of film photography. Cheers!
@jamaalnyc Жыл бұрын
Great video. When you pull film IE shoot 400 film at 200 ISO do you need to inform your developer you made that adjustment?
@standupstraight96915 ай бұрын
I think he said one stop was not necessary to worry about that.
@ejacks34 жыл бұрын
A question for anyone out there. Could you just shoot at box speed use your exposer compensation dial to over/under expose as you wish then develop normally to get similar results as pushing or pulling film?
@pixelgenau29822 жыл бұрын
The same question came to my mind. Obviously no one answered so far. Would be much more convinient having all options while shooting.
@benvandeneynde75084 жыл бұрын
I'm new to the film photography game, recently bought a Minolta X-700 (#minolta gang 🙂). But my question is, do you ever use the exp. comp dial to adjust for dark/bright scenes? (leaving development time at box speed). Or is the exp. comp, just a way to push or pull stop(s) in the same way as setting your iso from for example 400 to 800. Do you ever add/subtract a stop depending on the subject. Without adjusting development time... Hope my question is a bit clear 🤔🙂 Love your videos, man! Would like to see more POV shooting video's. Fan of those kind of clips.
@graham_white4 жыл бұрын
Definitely use the exp comp dial frequently and its not meant to push or pull film. primarily its for when you have your subject or important part of composition in harsh shadow that your camera won't properly expose for. it tells your camera to basically overexpose in order to get more detail in those shadows. I always ad or subtract a stop depending on the subjects lighting without changing development time. If you want to push or pull a roll you would adjust your ASA button up or down so the whole roll is consistent.
@benvandeneynde75084 жыл бұрын
@@graham_white thanks Graham for the response! In digital I use exp. comp. regularly, but nobody is mentioning anything about it "in film"😃
@graham_white4 жыл бұрын
@@benvandeneynde7508 for sure! it is weird (and sometimes confusing) how much certain things can change between the two.
@Dearmls7774 жыл бұрын
I started shooting a portra 400 at 100 iso by mistake, then i realized and changed it to 400 iso, does anyone know if the pictures i took at iso 100 will come out well if i develop the film as iso 400? 🤔
@tomconnor94 жыл бұрын
Dario Vm Yes they will come out but they will be 2 stops overexposed. But as it is Portra 400 which has a very good latitude they should be fine. Some people actually like to shoot colour film 1 or 2 stops over exposed because it gives a bright flat look. Just develop for 400. Always better to overexpose than underexpose.
@graham_white4 жыл бұрын
they will be overexposed by 2 stops. its portra so it depending on how bright it shouldn't destroy the images because its very forgiving. but yeah there is no way around that.
@joyfulcolouring73724 жыл бұрын
Love your channel mate.
@johnrodgers20184 жыл бұрын
The third reason to push film is if it is very old. Worth pushing it a stop.
@bobo.camera4 жыл бұрын
The rule I've heard is to just overexpose one stop per 10 years it's expired, and develop normally.
@KingJvpes4 жыл бұрын
azncastigar Yes! 1 stop overexpose every 10 years!
@KingJvpes4 жыл бұрын
Overwxpise the expired film!
@johnrodgers20184 жыл бұрын
Never heard the one stop every 10 years. Pushing a stop was what we did at the black and white lab I worked at. I suppose it would break down after three or four stops. Used to love getting 50 plus year old film someone found in a camera in their attic
@christofogui70363 жыл бұрын
I don't seem to see many comments associated with compensation dials... should we develop at anything else than box speed if we add/subtract one, or two more stops of light? (for reference I use an Olympus OM-2n)
@jevonsmith77764 жыл бұрын
This is great! Thanks for this
@lowellhutcheson8747 Жыл бұрын
When you push/pull in this way, are you just letting the developer know or are you asking them to push/pull?
@84nomas2 жыл бұрын
Does it make sense to rate portra400 at 200 and pushing it to 1 stop?
@paulinabyczek76542 жыл бұрын
thank you!!!!
@armandonin85102 жыл бұрын
what if you did it on a point and shoot like a contax t2 or fuji klasse?
@salamsam_3 жыл бұрын
urm i’m using lubitel camera. there is no setting for iso. how i gonna push my film?
@erikdewilde74044 жыл бұрын
Question, one you push it two stops do you have to develop the film like a lets say 1,600 iso film? This question because I develop my bw film myself at home. Thanks Erik
@jabez14093 жыл бұрын
Should I be pushing a BW film? Shooting HP5 400 on a Manual SLR. Or can I just continue on with my metering and shoot?
@AbdullahChakmakchi4 жыл бұрын
Great video. I really enjoy your videos they are so helpful and have great information. I've been shooting with UltraMax 400. I am wondering if it ok to push it to 1600 or 800? Did you try it out yourself?
@KingJvpes4 жыл бұрын
i've pushed ultramax to 800 with great results!
@AbdullahChakmakchi4 жыл бұрын
@@KingJvpes I will have to try it out. Thanks bro! I might even try 1600 closer to the winter time.
@fernandoobregon41914 жыл бұрын
might be a stupid question but when pushing/pulling do you adjust the shutter speed to whatever you are setting the iso to or do you keep shutter speed true to the films iso. Also, if you adjust the shutter speed of the camera, do you counter that by adjusting the aperture or are you all good?
@fustigate3141595 ай бұрын
Easiest way is to just adjust the ISO to "trick" the camera's light meter. Then meter as normal for that new ISO. So same shutter speed that you'd use on that light for that ISO and aperture.
@pacoblanco6783 жыл бұрын
Late to the party but what happens when you push/pull while shooting but have the film developed at box speed?