How to Make Money Woodworking & Adirondack Chair Detailed Build

Рет қаралды 2,374,030

3 жыл бұрын

114 - New Style Adirondack Chair and How to Make Money Woodworking
Detailed 3D plans available here: kingsfinewoodworking.com/coll...
Full Size Pattern Templates available here: kingsfinewoodworking.com/coll...
_________________________________________________________________________________________
Things I used in this build:
Jigsaw amzn.to/3p8X456
Sander amzn.to/3eB8k5c
I used a Festool sander, but that’s certainly not necessary, I also use my DeWalt frequently
Belt Sander amzn.to/2GF56B7
Palm Router amzn.to/2Ik9Ixe
Roundover router bit amzn.to/2IjcD9F
Drill & Impact Driver amzn.to/38nvta8
Drill Bit set amzn.to/2IgxpXp
Stainless Steel Square 8"x5.25" amzn.to/2U2NceP
Stainless Steel Square 6"x4" amzn.to/2U7A1JE
Countersink bit amzn.to/36d3Xti
Clamps amzn.to/3ezyt4s
Carriage Bolts 3/8” amzn.to/36fdFLF
Nuts 3/8” amzn.to/2U235Ch
Washers 3/8” amzn.to/38nfjxG
Wheels amzn.to/2I64NQL
Bolts for wheels amzn.to/2U54PdV
Washers for wheels amzn.to/3k96fPb
Nuts for Wheels amzn.to/359DU7e
Lock nuts for wheels amzn.to/2U6CgNe
3” deck screws amzn.to/2U5df4V
2-1/2” deck screws amzn.to/2IfQ7yq
And here are the some other things I use in my shop: amazon.com/shop/kfw
How to build the Thor’s Hammer Woodworking Mallet: • 16 - How to Make Woodw...
Or buy your very own Thor’s Hammer made by us: kingsfinewoodworking.com/coll...
_____________________________________________________________________________________________
NOTE: The templates are now FOLDED in an oversized envelope. Not rolled up like I show in the video. They are exact, and shipping is much quicker.
This video is about how I made money, and advice I have given others on how to make money doing woodworking. I am centering the video around a project build because that will make it more interesting. It also happens to be a very important project for making money. I actually paid much of my way through college by doing woodworking, and I have also helped many others do the same.
The build itself is a new style of Adirondack Chair that I designed myself. It is very comfortable since it consists of compound curves for the back and seat. Yet even with these curves it is quite easy to build. I have also designed the set of plans to allow the end maker to use any lumber from ¾” thick to big box store lumber that is 1-1/2” thick, and regardless of lumber thickness, it does not affect the plan or dimensions at all.
This is a very detailed build video, and much of it will be focused on perfecting the details of a salable piece. And some advice that can hopefully improve your woodworking if you are a beginner.
Link to the KFW Community Woodworking group. Share pictures of your work & get help if needed. Join our King’s Fine Woodworking Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools. / kingsfinewoodworkingco...
If you would like to help support our channel, there are a number of ways. One way is direct support through Patreon: / kingsfinewoodworking
You can also help without spending anything, just by liking and sharing our videos. Thank you for your support. We love teaching the world to do woodworking.

Пікірлер: 3 500

@mrlong12u1 Жыл бұрын

After purchasing your template and Instructions, I decided to try and build one. I followed your video that helped me through the process, I have to say that I was extremely happy with the finished product. In a week or two, I'm going to make my 2nd one. Thanks for being so detailed in your video. This made my life so much easier. My wife was very happy with the finished product she had to post some pictures on Facebook bragging on my work. Thanks a million!!!

@KingsFineWoodworking Жыл бұрын

That’s awesome! Thank you!!

@jeremyash7718 Жыл бұрын

What a fabulous video! You're like the Bob Ross of Wood Working - clear, concise, calm and educative. I'll be over to your site and picking up the plans for this build and more, I'm sure. Thank you for the material.

@ronnygrullon6580 3 жыл бұрын

Hello Mr. King. I have been watching your videos for quiet a while now. I subscribed emmediately after watching one of your videos the first time. Back in November 2020 when you posted this video, I watched it 3 or 4 times before deciding to purchase the plans and the full size template on Nov 17,2020. I had most of the tools( drills,drivers,palm sander, mitersaw and planer).This project was a great reason to purchase a bandsaw. On January 29,2021 I finally started the project by purchasing the rough lumber from my local lumber yard and started the project. Yesterday March 10th,2021 I finally finished 5 chairs for my family and I. I really like the idea of building the chairs, I enjoyed cutting lumber to size, planing it , drawing utilizing the template( also made a more permanent template out of 1/2" plywood) But I absolutely LOVE....LOVE the final product. My other Family members and neighbors are asking me to build them some. I Love the size of the chairs, how comfortable they are and I LOVE the fact that when I grab and hold of the chair it feels like I am actually holding a good quality piece of furniture. During this built I watched this video probably a 1000 times, it helped me everytime. I wanted to say thank you for all the work you do and share. Looking forward to your next video. Thank you

@DiannaAtherton 3 жыл бұрын

Brings back wonderful memories of making this chair with my dad back in the 70s. We bought chairs from a man driving around the neighborhood with chairs and tables stacked 15 feet in the air. We had those chairs until we couldn't repair or patch them anymore. I would love to make this chair from scratch. Wonderful beginner project for me.

@philipmiles3410 3 жыл бұрын

I would love to build these chairs and would love the plans for these chairs . It is great to see the added strength for us bigger guys . Thanks Phil .

@KingsFineWoodworking 2 жыл бұрын

Hi! Here is the link to the plans for it. These are essential. kingsfinewoodworking.com/collections/project-plans-for-sale/products/adirondack-chair-new-comfort-design-3-d-plans After the plans, this is optional. These full size paper templates are for all the curved parts! This makes it even easier. kingsfinewoodworking.com/collections/project-plans-for-sale/products/templates-for-adirondack-chair

@quadsquadracingable Жыл бұрын

I don't know how many times I've watched this video, but when I start making a batch of chairs I love watching it to inspire me all over again! Since I started making them for like 2 years ago I've improved my shop to make these chairs! I've made them with a corded jigsaw, router and sander. This is the first time with a bandsaw, router table and baltic Birch templates. We quickly ran the cedar through the planer today, which before we sanded all the rough cedar, so we saved some time already! My son and I have built the last three chairs and he's helping me do these 4 too! I love building these so much! Thanks as always James!!! I post up pics in the group page

@KingsFineWoodworking Жыл бұрын

Thank you!!! And I always love to see the pictures in the community! 😊👍🏻

@quadsquadracingable Жыл бұрын

@@KingsFineWoodworking you've created a great community!!

@sitgesvillaapartmentneilsc7924 Ай бұрын

what group page please??

@rickpouley2857 3 жыл бұрын

I love that your daughter is helping you with your projects. Great to teach her and us! Thank you! PS.. Love your chair also!

@scottknoedler8396 3 жыл бұрын

Just getting started with my own woodshop and this looks like a perfect project to start with. Love watching your videos, very instructional and easy to follow. Made cupboard doors from another of your videos. Thanks

@KingsFineWoodworking 2 жыл бұрын

Awesome! Thank you for watching!

@crafts4260 3 жыл бұрын

i never make comments on youtube, but i had to say it. you sir, are a true artist!

@TheADVENTURESoftheCAYMANJEWEL 3 жыл бұрын

One of the best videos ever. These templates would make all the difference in the world for us. We offer a community workshop for veterans and first responders suffering from PTSD. Thanks for all the great videos.

@hoperules8874 3 жыл бұрын

That's cool, if your org has a url, you should post it--esp if your members do this project.

@lanasimm 2 жыл бұрын

I just want to say THANK YOU for creating encouraging videos! I'm new to woodworking and wanted to make this chair for my parents. After watching this, I purchased your plans and the template and am looking forward to making this! I'm also going to try and make the sword you made for your daughters! I have a friend who loves LOTR and am going to make the sword with elvish burned into the blade! Very glad I found you!

@rudolfboukal1538 3 жыл бұрын

Like I said sometime ago - you're a great teacher. Again, today, I simply watched you performing your craft as pure entertainment. Thank you for being a part of my good day!!

@fcolon4 3 жыл бұрын

Anything you offer I’m ALWAYS game for. Over the last year you’ve taught me so much. You and your family are awesome. Keep up the amazing and fantastic work!

@volleyballjerry 3 жыл бұрын

Agree - I especially appreciate his older two daughters and his wife participating. I am lucky because I have two teenage daughters and they are quite the help when they are not studying or practicing with their team.

@satxsatxsatx 3 жыл бұрын

the curves are vastly superior to the standard straight Adirondack rendition. Great work, thanks.

@donwood7800 3 жыл бұрын

Oh, WOW!! I really love the design of this chair! I would REALLY love to have a set of the plans! If it was the plywood set, that would be icing on the cake!! Thank you SO much for sharing this wonderful design!

@annaleewashington8569 3 жыл бұрын

I could watch this all day! You explain things so well and make it look so easy!

@saltboxwoodworks 3 жыл бұрын

Of course I would love to relieve the templates you created in this episode ! Thank you so much for the KZfaq content you produce ! Your creativity and techniques are invaluable and your kindness in sharing is a blessing. Retired and now it is my Jr. High WoodWorking come true! And I deserve it after 50 plus years of a day job 👍

@talonkylan1844 2 жыл бұрын

sorry to be offtopic but does someone know of a trick to log back into an instagram account? I was dumb lost my account password. I love any assistance you can offer me.

@jaggerimmanuel5927 2 жыл бұрын

@Talon Kylan instablaster ;)

@talonkylan1844 2 жыл бұрын

@Jagger Immanuel I really appreciate your reply. I got to the site on google and im in the hacking process now. Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.

@talonkylan1844 2 жыл бұрын

@Jagger Immanuel it did the trick and I finally got access to my account again. I'm so happy! Thanks so much you saved my ass :D

@jaggerimmanuel5927 2 жыл бұрын

@Talon Kylan You are welcome =)

@ladySelua 3 жыл бұрын

This seems like a reasonable first attempt at an outside chair. I'll have to give this one a try. Thank you for the video :)

@rodneychastang1120 3 жыл бұрын

I love the art work in this project. I am beginner wood worker this would help me tremendously. THANK YOU FOR THE FINE WORK THAT YOU ARE DOING.

@MrKelloggs62 2 жыл бұрын

I’ve been building Adarondak chairs as Christmas gifts for a while. I have never sold chairs, great idea! I appreciate your design. Always looking for new ideas. I have sized down my chairs for grand kids and they love them. Im now retired looking for something to do. Thanks for your idea! Ray Kelley

@gerardobahena 3 жыл бұрын

Incredible video. This is exactly what a beginner like me was looking for. A whole project being built from start to finish with excellent detail. Thank you so much.

@befmx31 3 жыл бұрын

KFW always produces great videos.

@tfukink 3 жыл бұрын

Hey Gerardo, if this is your first KFW vid, you definitely need to watch the rest. All of his vids are very detailed. hes a little stingy with the glue though. ;)

@natefoldan 3 жыл бұрын

@@tfukink He always puts the perfect amount and none beads out :)

@paulpardee650 2 жыл бұрын

@@tfukink ko ok

@charlesmarion2032 2 жыл бұрын

Dude I've got 40+ years in the trades and I'm learning new stuff from almost all of his videos.

@josephmillion2480 3 жыл бұрын

I'm definitely interested in the templates! The wife would love to see a return on my tool expenses :) Great job

@blazejennifer2507 3 жыл бұрын

I would love a set of templates to build your wonderful design chair.

@terrybrown3454 Жыл бұрын

Thank you and your daughter. Loved to see interaction with our children. Loved the chair styles.

@davidwheat1963 2 жыл бұрын

SO GLAD to see you and your family making videos again!! Love you wrok and would really love to have the template set!

@jamesmossbarger4249 3 жыл бұрын

I would really like the plans for this chair. I am a disabled truck driver trying to learn woodworking. Thank for your videos.

@Denoze1 3 жыл бұрын

Take my request and give it to this guy.

@bigmikedog9168 3 жыл бұрын

@@Denoze1 I like to have it

@jamesmossbarger4249 3 жыл бұрын

Thank you so very much

@terryalexander9624 3 жыл бұрын

I would LOVE to have he template set. FYI I’m a retired “old” man in West Texas. Love your channel and your shared knowledge.

@BryanKilbourne007 3 жыл бұрын

I would Like to have a template set. Thank you

@hectorsalazar2431 3 жыл бұрын

What part of west Texas you from?

@terryalexander9624 3 жыл бұрын

@@hectorsalazar2431 Anson....about 30 miles north of Abilene.

@richardturchi1154 Жыл бұрын

I just watched your Adirondack chair build video that said leave a comment for a free set of plans. Would like to gift a chair to a colleague I’ve worked with for 15 years, who is retiring after teaching Special Education for 35 years.

@fillstone9313 3 жыл бұрын

I just got interested in woodwork a couple of days ago when I had to do some carpentry that I haven't done before. Amazing thing happened when I worked. My concentration was on the job, no thoughts whatsoever and I felt so relaxed and happy doing it. So I started thinking that maybe I would really enjoy doing it. I'd love to be able to make something like that myself. Thank you for sharing your experience. I live in Russia by the way. Thank you. Subscribed!!!

@pierdolio 3 жыл бұрын

I can't believe that I've sat through this entire presentation. I just ordered the plans and if I never make one of these chairs at least you'll have some money for your effort.

@timothygaudet8991 3 жыл бұрын

Want to get some template like that I just like making things

@heaven-is-real 3 жыл бұрын

@@timothygaudet8991 it's pretty cool, i agree with you

@BrianHw1 3 жыл бұрын

What did you think of the plans? I thought they were pretty poorly done. They're not really even plans, just pictures of the chairs and pieces.

@johnhassan2074 3 жыл бұрын

@@BrianHw1 agree

@mikesmith7851 3 жыл бұрын

wewwsssssc ce ceviche k eh e k in sep ed w

@frogmann49 3 жыл бұрын

“Too much is always enough”. Great vlog. Hopeful for templates.

@jaymes40 3 жыл бұрын

I wish I had found this video 8 months ago to have had a shot for the templet. The chair looks amazing and with time and some patients seems doable with basic power tools. I think this will be my first actual build. thank you for a great inspirational video and build lesson!!

@unclebo1966 2 жыл бұрын

I would love to build these chairs and to have a set of plans for these chairs . As a big guy, I like seeing the added strength for us bigger guys. The tips with the plywood templates is also an excellent idea! Thanks Bo

@bobshorkey1502 3 жыл бұрын

I’m gonna make 8 for my back yard then you said how much you make on those then I Realized on how much I’ve learned and I’m only halfway through awesome dude I’m getting those plans tomorrow I’m Bob of “Pappy Time woodworking” LATER

@bambam4243 3 жыл бұрын

I would love the plans to this chair, I'm just starting out in woodworking and this chair looks very nice and easy for a beginner. Thank you for the content!

@KingsFineWoodworking 3 жыл бұрын

Hi the plywood set was given away, but we do have these available: A link to the plans for it. These are essential. kingsfinewoodworking.com/collections/project-plans-for-sale/products/adirondack-chair-new-comfort-design-3-d-plans After the plans, this is optional. These full size paper templates are for all the curved parts! This makes it even easier. kingsfinewoodworking.com/collections/project-plans-for-sale/products/templates-for-adirondack-chair

@jamescooley7849 2 жыл бұрын

I started my career as a carpenter in my grandfather's shop building porch swings in 1973. I plan to retire next year to my own shop that I am building now. Nothing could make me feel better than to start my retirement with a set of plans to build these beautiful pieces. Great job!

@sarahn.mccullers3279 3 жыл бұрын

I would love to have a template. I am a beginner that always wanted to build the items I needed for my home and friends. This is exactly what I need. Your video was amazing. James, you are clear and have really put a tremendous amount of thought into ease for us and comfort for the users. Thanks so much.

@erjdev 3 жыл бұрын

First off - I bought the plans. Thank you very much for making such a detailed video with tips and tricks! Dimensional Cedar isn't available anywhere near me, and I don't have the tools to mill my own lumber from a lumber yard. Would you recommend Southern Yellow Pine or Pressure treated Southern Yellow Pine for this build? I have heard it's always best to wait for treated lumber to dry fully before assembling which infers staining and assembly will take a very large amount of time for my chair project.

@gpdoyon 3 жыл бұрын

Cedar is relatively pricey for me so I am going to build my first version in pine, too. I'll use it outside but I'll put stain and a weather sealer on it, too. I'll make a second one, maybe, from cedar the second time. I, too, bought the plans!

@Vstar845 3 жыл бұрын

I'm in same situation as you I'm in NY. Only cedar in stores is fence pickets. I was looking at kdat decking boards. It's pressure treated then kiln dried. Found 2 lumber yards near me with it available going to check prices later.

@timclark5758 3 жыл бұрын

Just found your video and love it, I would also love to have set of the wood templates. Thanks Tim

@michaelhendricks7117 3 жыл бұрын

Appreciate your time in making these videos. Very professionally done.

@rollingshadowace7505 3 жыл бұрын

one of the best explaining videos on basics i have seen on yt - great stuff

@anndrewmountcastle4630 3 жыл бұрын

I would really love to have the wooden templates.

@dancripps3418 3 жыл бұрын

I am interested in the plans for your adarondack chairs.

@KingsFineWoodworking 3 жыл бұрын

@markranger5125 3 жыл бұрын

I agree you can never put to many support screws .Great tips on sanding. Going to try them! Setting up my garage now for my first project. Always love working with wood as a kid, but became a machinist. Work is slow now and need some killer chairs for for our new outdoor movie projector. And "wood" love the templates. And maybe sell a couple to build up my tool collecting. Thank you for sharing you work, and keep them coming.

@mikeingham102 3 жыл бұрын

I'd plan to make a set for both my son's families. Great presentation, Thanks

@jameshensley2530 3 жыл бұрын

Live your chairs and especially the pride you show and commitment to go the extra step to make them as perfect as can be. I've learned so extra steps from you to help me with my Adirondack chairs. I would love a set of those templates also.

@kennymiller4428 3 жыл бұрын

The only change I would make for aesthetics would be to pencil a line wherever you have a row of screws so they form a straight line. I think that would look much better than a wavy line as in the front of the back rest pieces and the seat pieces.

@BrianHw1 3 жыл бұрын

This is a good idea. I'd probably set up a jig to drill them on the drill press. They'll be much more uniform. I did this on another adirondack chair I build.

@johnhassan2074 3 жыл бұрын

Right on. I was wondering the same thing about uniformity and consistency

@geneevans5180 2 жыл бұрын

For an old guy who needs to have a new way of doing things as opposed to my previous lifestyle as a pastor/teacher, I'm looking to start up woodworking. I first learned this in wood shop in high school and have done some handy jobs over the years but now its on to new and better projects. First I thought I'd just do something for fun, but your detailed, yet simple to understand instructions have given me the idea of making some extra money to compensate for cost of living and inflation. I have the basic tools you spoke of on the video and I want to get started with building the chairs. Also, you offered the template for a deserving guy...I hope that I qualify. At any rate, I anxious to be going. I'm gonna be watching your video over and over and get myself up and going by the first of the year. Blessings and Merry Christmas. Gene Evans, Sugar Land, TX

@wb_finewoodworking 3 жыл бұрын

Well I just voted for your Adirondack Chair Build Off for 2021. Both did an outstanding job and it was difficult to chose between the two. Yes, I liked their videos and subscribed to their channels as well. I’m looking forward to seeing more from both guys. I hope all is well with your family. I’m enjoying my set of your Thor’s Hammer Mallets.

@Bravo4Carpentry Жыл бұрын

James is an amazing human. I’ve probably watched this 10 times

@MrScottieDS 3 жыл бұрын

I would love to have a template for the Adirondack chair

@isidrosalmeron2999 2 жыл бұрын

Good job

@MrHf4l 2 жыл бұрын

I love your videos. Im a new wood worker and really appreciate your approach to teaching and explaining the way you do. Thanks!

@streetglidescott6424 2 жыл бұрын

Great tutorial! Great product! Driving a couple hours to a cedar mill this weekend since there is none to be found in Knoxville. Thank you so much.

@jeremybernien1013 3 жыл бұрын

I'm very interested in the templates - these chairs look amazing, I've never bought 'fine' furniture before so the price tag is initially shocking, but considering the number of hours put into it I guess it makes sense. I've enjoyed your videos, you do a great job making content. One small point - for the screws in back slats at the level of the arm rests - you don't make sure they're in a straight line across? It seems pretty noticeable in the video that they're uneven, not sure if that's something a customer has ever mentioned. Seems like it should be easy enough to mark a horizontal line or a clear curve to make it look even better once finished.

@robpiechowicz9528 3 жыл бұрын

I would love to have a template for this chair it looks so comfortable

@patrickhayes7586 3 жыл бұрын

I love what you are doing. And I would love to have a set of your templates. PBH, Denver

@KingsFineWoodworking 3 жыл бұрын

@@patrickhayes7586 , Hi! Here is the link to the plans for it. These are essential. kingsfinewoodworking.com/collections/project-plans-for-sale/products/adirondack-chair-new-comfort-design-3-d-plans After the plans, this is optional. These full size paper templates are for all the curved parts! This makes it even easier. kingsfinewoodworking.com/collections/project-plans-for-sale/products/templates-for-adirondack-chair

@jodienpat 3 жыл бұрын

My husband would love this template. Thanks for all the handy info and tips.

@sandbman77 2 жыл бұрын

Always enjoy watching you build; very thorough and a true professional. Would absolutely love building these with the plywood templates!

@wildsurvivalskills 3 жыл бұрын

Id love a plywood template if you are still doing giveaways! Great video

@KingsFineWoodworking 3 жыл бұрын

@@lorenperry3726, all you really need are the plans. They are in pdf format, and you download them on the spot.

@rosatodesco6048 3 жыл бұрын

@@KingsFineWoodworking vvbf

@fuelledup2861 3 жыл бұрын

I would like to buy the plans, but the shipping is a lot to the uk. Can I purchase a this as a file I can take to a local printer to print out?

@MrMavin11 3 жыл бұрын

@@KingsFineWoodworking0 see 9 to it 87y up 6l

@dparsons9713 3 жыл бұрын

im still trying to find that one thing that sells well, these templates would be my answer i know.

@katherinemorris6480 3 жыл бұрын

Love the design, the back has appear to it. I love a set of the templates.

@ExhaustedCISSP 2 жыл бұрын

This is one of the best woodworking videos that I have ever seen. So detailed and clean.

@KingsFineWoodworking 2 жыл бұрын

Thank you, That’s very kind.

@jeffmaynard8826 10 ай бұрын

Thank you so much for your videos! Built 2 for parents and they love them!

@johnmcnicholas5044 3 жыл бұрын

I would like template's for the chair

@dananderson3183 3 жыл бұрын

Thank you for a great video and how fun to do the giveaway! I truly enjoyed both of the other builds and look forward to following them and watching their upcoming videos. Keep the great tutorials coming.

@johnestes2288 2 жыл бұрын

Love your chairs!! I just started getting into woodworking. Im not mechanically inclined. Your videos are great and easy to follow for beginners like me. I would love the templates for the chairs. Thank you! Keep up the great work.

@loadedwrench14 3 жыл бұрын

I noticed you are appearing on 731..you two got me into wood working..now I'm addicted..I got the plans for these and I've built two of them..came out excellent!! Ty for your knowledge

@watcherdude1330 3 жыл бұрын

Hello from 🇨🇦 . My wife just loves these chairs , but the ones you buy at the stores are junk. So glad I found this video , I was going to make a couple but was not exactly sure on how to make them look good and be COMFORTABLE. So I watched this video and bought the plans and the templates. While I was there I figured I may as well get the plans for the table saw sled as I just purchased my first NEW saw, and I will most definitely make use of that as well . So I am looking forward to getting the drawings shipped to me. Thanks for all you do for newbies like me . 👍

@deirdrejohnson2223 3 жыл бұрын

I just ordered the 3D plans and Templates for both, the Adirondack Chair and Adirondack Rocking Chair!! Thank you so much for all the hard work and sharing with us! I cannot wait until your next meet and greet that I will try to attend to meet you!!

@KingsFineWoodworking 3 жыл бұрын

Awesome! Hope to see you there! I look forward to seeing pictures of your shop shed as you get it outfitted with tools! It’s a good size, I bet you’ll love it!

@LB-W 2 жыл бұрын

So excited to have a go at this. I have my brothers tools from him passing. I think a lovely chair made with his tools would be a cool reminder. 🙂

@ronaldhenry8561 3 жыл бұрын

Just now getting started in woodworking. I saw your video on the extreme miter table. Enjoyed the video very much. I am not ready for that build, but will do the Adirondack chair. Also, I enjoy your daughter getting into your videos. My granddaughter would do the same thing.

@timothypena9598 2 жыл бұрын

Thanks for such an AMAZINGLY COMPREHENSIVE video. Most of these videos I have seen give very limited to no details . Nor do they explain the why or how behind what they are doing! This video is saved to my favorites! Thank you again!

@johnhuggins5021 3 жыл бұрын

Hey James, Figures I would stumble upon this video months after you put this video out and offer the plan templates for free for some fortunate woodworker. I definitely like your mindset about how to take one's fav hobby and use it to support their wood working habit. LOL. I'll definitely look forward to purchasing a set of your plans both for the standard adirondack chair and the rocker version you did in a later episode that I first stumbled onto. I really like how you used different woods to add an additional two-tone finesse I have never seen anyone else try with their adirondack chair builds. And I really like that you add curves to your cut wood slats so that one's back fits more comfortably when sitting in the chair for long periods of time - especially if you don't use cushions for the seat or back. That is definitely paying attention to comfort I don't see very often in other videos. My hat's off to you, dude. Great work!

@KingsFineWoodworking 3 жыл бұрын

Hi John! Thanks! I just replied to your email. We’ll talk again, 😁👍🏻 James

@RayfieldLittle 2 жыл бұрын

simple chair done your way. excellent advise on sanding and plans. I love it.

@6tim7 2 жыл бұрын

I really appreciate how you explain the things you do. I have next to zero experience working with wood, but I have the interest, youre a great teacher, and im taking the role of a happy student. Well done. I wish i would've seen this sooner, maybe I would've gotten those plans! Maybe next time. Anyway, I'm subscribed!

@samhutson7966 Жыл бұрын

AWESOME 👍🏽 I will be making this, for my patio!!

@chrisbfishing1733 3 жыл бұрын

Just watched from start to finish! Gonna order up plans for the chair and start making some! Cheers man Great video

@keves11 3 жыл бұрын

Newbie woodworker here.. watched many videos and by far yours is the best one for me.. you're an excellent teacher and I love the way you deliver the information. Thank you for all that you do when sharing.

@KingsFineWoodworking 3 жыл бұрын

Thank you. That’s very kind.

@danielallen7894 2 жыл бұрын

I watched the entire video last night ordered my plans this morning can’t wait to get them and start building them!

@Sly_Wolf_1 2 жыл бұрын

Lovely chairs and probably the best "how to" video I've seen. Thank you.

@jimtaylor7750 10 ай бұрын

James I made the Adirondack chairs from your awesome plans, templates and video and I couldn't be more happy. They are very sturdy, look great, are easy to get into and out of and they are very comfortable. Thanks a bunch. I will be getting more plans from you I am sure.

@KingsFineWoodworking 10 ай бұрын

Thank you. You’re very kind!

@steveedwards6237 2 жыл бұрын

thanks for the detailed explanation of the sanding. great starter project and i'm looking forward to getting started

@jpmcn1976 3 жыл бұрын

Just bought the plans and ordered a set of templates. Gonna make a few of these chairs for my mother's outdoor picnic area and another set for my front porch. Very excited to have another build to work on.

@KingsFineWoodworking 3 жыл бұрын

Awesome! Thank you!

@chipbarkhouse7702 3 жыл бұрын

Very impressed with your videos and the ease of explaining the tips to help make one go to the next level of finishing a project. Coming from Ontario Canada, I don't expect your offer of the templates. But I look forward to being subscribed to your channel and beginning my pre retirement plans. Thanks again for making this video. I'm gonna order these plans so I can make my wife her birthday present in may.

@idowuoyewole7720 3 жыл бұрын

Just had the time to watch the full length video. Brilliant and thank you.

@andreacooper405 2 жыл бұрын

I really appreciate all the details in this video. The product turns out amazing in the video. I'd love to try to build this at some point.

@nicholastaylor6511 3 жыл бұрын

I have totally watched this video about 15 times! Got the plans and the template. Can’t wait to build it!

@elijahyanez8971 3 жыл бұрын

How did that build go? I got the templates and was about to order the plans but read a bad comment about them.

@nicholastaylor6511 3 жыл бұрын

@@elijahyanez8971 still going, life happened and had to put the build on hold for a while.

@TheGypsyNurse_ 2 жыл бұрын

I bought the paper template and can’t wait until they arrive , love your show Mr King!

@jasonfitch9341 3 жыл бұрын

I’d definitely love to have one of those templates. Great work!

@stephandelange1776 3 жыл бұрын

I have to be honest. Ever since I had to stop working due to my health, things have been really hard financially. I do a little woodworking to try to do things for my children with scrap wood that I find in the garbage "cause we can't really afford it anymore" I try to make little things to try to sell to make some extra money. But having nice plywood templates like this could really help us maybe make something worth a little more. I'm not looking for sympathy, but I must admit that it would be a fabulous gift! You really do beautiful work. Thanks

@miokeeranch3899 6 ай бұрын

Fantastic video! No one explains the process in simpler terms. I appreciate the content and the way that it is presented

@uruguay1970 3 жыл бұрын

I love you videos. I just purchased your plan for the router jig to router juice grooves. I would love to revive your set of templates for the Adirondack Chair. Also, I think it’s great that you are teaching your daughters how to be woodworkers.

@smoleyhokes 2 жыл бұрын

Very well done. A great how-to video and I love the chairs.

@bobbycallins2459 2 жыл бұрын

This is awesome. It's exactly what I was looking for and well put together in your video. I will be purchasing the plans. Thank you

@DownWordGames 2 жыл бұрын

I just ordered your plans and paper template! Going to take a shot at selling these! I've sold some cutting boards but haven't found my niche yet. This looks like a fun and profitable build! Thanks for all your hard work. I know it wasn't easy coming up with a design that was just right. :)

@salpecoraro4378 3 жыл бұрын

love the stuff you and your children build. Definitely interested in getting the Adirondack Chair templates!!!

@danbobway5656 2 жыл бұрын

Great video! Just getting started woodworking myself so I'm excited to try building one of these

@macmccord9962 3 жыл бұрын

I am about two steps away from having this Adirondack chair done and it was so easy with the plans and the template that I am in love!!! After the first one, I am going to go to a Doug Fir chair or two as covid has increased prices so much ... With Doug fir HD had the materials around $95 per chair... The cedar one is beautiful but the Doug Fir will make me money!!!! thanks James!!!!!!!!!!!!!!!

@KingsFineWoodworking 3 жыл бұрын

Thank you!!!

@bdslim1058 Жыл бұрын

Love this chair!! Can't wait to order the templates!

@autobot513 2 жыл бұрын

I've made a couple of Adirondack chairs and what I didn't like were screw holes in the top surfaces of the arm rests or the chair slats. The last chair I made I decided to put pocket screws in and hold the arms and seat slats that way. I just like the look of wood with no screw holes showing and of course helping to prevent water from getting into the wood. However...I do love these chairs you have made James and will be buying plans etc. from you. Fantastic job.

@gregharris3502 2 жыл бұрын

I just started wood working and was looking for a chair to build. Thanks for the video I think I’m going to try to build this this weekend

@mikel7176 2 жыл бұрын

Hello my name is Mike. I really enjoy watching your videos, I'm 61 years old on a fixed income.. I truly enjoy working with wood I've been a carpenter my entire life.. I would love the opportunity to make Adorandack chairs. I've made many picnic tables in the past, There's just something about the smell of cut lumber, I believe it's in my blood. LOL Kind regards, Mike PS, Here's hoping I'm one of the lucky individuals who will receive that wonderful gift you are making.

@jackpinnell3204 3 жыл бұрын

Awesome video!!! Great content! Comprehensive detail! Tips and tricks were a huge bonus too. Ordering your template! I've been a subscriber for a while.