KingSong S22 motor replacement
Рет қаралды 6,876
Жыл бұрынHow to replace the motor
@AndreiPetunin Жыл бұрын
Thank you for the effort!
@mikemelroy1424 3 ай бұрын
I'm getting an error code 17 and I just replaced the motor with a new one. Is there anything else that could be giving me that error?
@AG.Floats Жыл бұрын
Easy tire change TBH Most wheels twice the time and screws before even getting the damn thing out just a little bit. I'm done with plastic shells. All I have to do to mine is tighten down those 4 screws on the slider bracket on both sides. Just became loose.
@dirkschelfhout6460 Жыл бұрын
I don’t see any glue being applied to the screws when recassembling. Is the glue still on it ?
@ChrisB-vy4ft Жыл бұрын
After I install the motor. When I turn it on. It spins the tire. Is that normal? What do I do after that?
@milordas Жыл бұрын
8:51 i would realy replace those philips bolts to hex
@dirkschelfhout6460 Жыл бұрын
Getting that small black cable under the wire cover at 8:44 was no fun. There should be more space under the cover.
@vincentkim2721 Жыл бұрын
Oh very good ^^
@dirkschelfhout6460 Жыл бұрын
The screws at 1:57 don’t come off. Pretty sure I use the proper tool. At setting 16 thescrew driver blocks. Disabling that it ruins the screw. Using an allen key hand tool doesn’t do it, it almost feels like it would snap in my hand.
@ChrisOldright Жыл бұрын
did you figure out a way to remove those screws?
@dirkschelfhout6460 Жыл бұрын
@@ChrisOldright no, but there is another way for the wheel to come out. Then I had to remove the 8 screws on the motor wheel. 2 were hard, i didn’t have a heater.so hitting on it with a hammer gotvthem out. Now I am waiting for the spare parts they send me. They failed to send by express so will be long wait.
@dirkschelfhout6460 Жыл бұрын
Following this : kzfaq.info/get/bejne/jq2TfdyK0L7bqas.html
@dirkschelfhout6460 Жыл бұрын
My brand new wheel had a 1-2 mm splinter kind stone inside between the inner tire and the rim.
@Euc_spirit 8 ай бұрын
Sure. The Motor Screws are way too tight to skip this issue!!! Sad. But only a S22 Rider will know.
@slidersgliders5516 Жыл бұрын
The suspension sliders are a bad design. Poor quality , mine has dust already after a few days riding.
@noelleonard2498 Жыл бұрын
when the grit scores the channels that are also the battery cases it won't matter how many sliders you replace. shoddy design
@noelleonard2498 Жыл бұрын
something that should never need done.
@SolarizeYourLife Жыл бұрын
This is a sad show how not to do a suspension wheel, and look at the complete tear down just to get at tire!!! What a nightmare...
@pR-cv4iu Жыл бұрын
It takes 15 minutes to drop the motor with three tools, how is that a nightmare?
@Oraclereason Жыл бұрын
I think that comment is envy speaking. For an EUC this is fairly straight forward. Not a nightmare at all
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 4,5 МЛН
HIA Shorts
Рет қаралды 4 МЛН
vazovskie.official
Рет қаралды 1 МЛН
Nguyên Ngốc Shorts
Рет қаралды 948 М.