Thank you for the review. That’s the same model I plan to purchase, without the cab. I have 80 acres with lots of trees. Grapple and tiller will be the first implements. The DK frame seems substantial. Dealer within a 30 minute drive.

Great video. Thanks for the straightforward review.

Thank you for letting us know how reliable and good these Kioti's are. Watched your excellent videos and the maintenance ones too, and now am a happy subscriber. You and the other owners helped me decide on a CX3520 with loader, backhoe, pallet attachment, and grapple. I also do my own maintenance, and just did the first greasing at about 8 hours. Will check the torques and other fluids next weekend, and love it so far. Keep up the great work, and congratulations on your wonderful property. Enjoy!

Good long term update. Thanks!

Love the video. Good editing and I like the fact you went over the lights, I didn't realize how much I didn't like mine until your night demonstration. I have a DK4710hst cab (identical tractor to yours minus the ecu). I have 50 hours on mine and use it mostly for snow removal, I had 1 bolt fall out for the 3 point control lever and the bottom clamp on my bottom radiator hose wasn't tight enough. I have 2 complaints, 1 is the fog; my cab fogs way too much way too often, even with ac on, fresh air etc, I have to open back window a crack to even stand a chance. second thing is a weak factory alternator, with all the factory lights on and rear window defrost I can see my lights dim when I turn my wipers on and the wiper speeds slow down a bit. Heat is a bit weak too and factory options like front fenders don't exist, one of my front knuckles wasn't even drilled and tapped. Overall, I like the tractor but as it is my first, I probably would have been happy with any brand. Thanks for the video!

I have had my CK27 hst for 10 years (1074 hrs) mainly for plowing snow. The first 3 or 4 years I used my front mount blower, but quickly found that the front bucket was a better way to go for me. I put a tooth bar on the front and also plow with the back blade. The day it was delivered I moved about 80 tons of gravel with it. the next day did another 25 tons. Break it in slowly? Nope, break it in doing what you expect it to do. Did the first oil and filter change at 80 hours and every 100 hours after that. I run Rotella T4, 15W40 oil. I don't have DEF/DPF/EGR or any of that nonsense to worry about. It was good on fuel until I took the muffler off and put a 3" straight pipe on, now it is GREAT on fuel. Yesterday I fuelled it up right to the shoulder of the fill hole and plowed snow for two and a half hours and used 1/2" of fuel out of my 7 gallon tank. I don't baby it at all, and it seems to want for more use. It had a no start problem about 6 years ago that between me and the dealer over the phone narrowed it down to the fuel shutoff solenoid relay. Cheap fix. Would I buy another one? In a heart beat.

Been great tractor for me. Only real issue had left rear axles shaft seal leak. changed inner and outer bearing with new seal put back together and runs great. Where I have had purchased my tractor I will not take back. I do the work as 3 times took to them I had to redo the upper link hoses so had enough room to bend and also run the fitting down till bottomed out and then tightened the lock nut no leak they don't seem to get the mechanical of most things so I don't let them touch it. I have had zero issues since . Wheel seal I replaced and no issue no more leaks. run all summer in the heat of Florida.

Good looking tractor. Terrible lights at night.

I bought a c k 2620 open station and I love it very hard working tractor no issues yet

Love my CK2610SE Thanks for all the tips from grease guns to servicing your tractor!

I have a 22 Kioti. Love it 👍👍

Not one of the big brands! Awesome review, but they are the #3 tractor brand in North America I recently read in an article. I just bought a CK 20 cab and I love it

Nice shop layout.

Thanks for your 1yr experience video update. I too have the K5310 SEC with just under a 100 hours. It came in about June last year. Curious that you have hydraulic fade. I did a 200hr service at 50hrs. Used all Mobil products and haven't had any fade yet. Hopeful that is an anomaly that stops for you My 3 point lifts and holds my 6' EA wicked bush hog overnight. Keep the updates coming and good luck with your channel.

2-1/2 yrs ago I did the do-diligence tractor research and settled on Kioti. At the dealership, some 50 miles away, I gave him a list of work I needed to accomplish on our 80 acre ranch in Wyoming. He came up with what "Tim-the-Tool Man Taylor" would always say ... "More POWER!". AND ..... he was RIGHT! 300 hrs later the RX 7320 has accomplished what was needed and stretch it's use of POWER. I had originally thought the NX55 or 60 would do the trick. They might have been stretched pulling a 3-bottom plow or handling 4'x4'x8' hay bales. My ONE BIG DISLIKE ...... the front loader ..... is just toooooo hard to see getting the skid steer attachments attached. Pain-in-the-gladiolus maxi mus. Yes .... would purchase one again .... but ...... this should last me until I die and I'm 75 now.

My CX2510 (a baby compared to your DK5310) had the same issue with the alternator at about 10 hours. Besides for that, its been running great for 2 years. I read of complains about the bolts coming loose, but I have not experienced that at all.

Great job on the video and review. Really nice looking tractor. I went with the CK3510se and really have been impressed and pleased with it. Did a one year review and showed some add ons. Check it out if you get a chance. Really like the led light bar you put on the front grill guard. Subscribed to your channel, looking forward to more videos.

NX4510, had some really good experiences with it and some bad. The Good , dealership did fantastic work of building it up, no bolts came loose. The bad, the seals were not installed correctly at the manufacturing plant so the dealer will replace at no cost to me since is still under warranty. I have 200 H and is one year old almost.

I think i put 7 inch leds on my nx and it's like daylight almost, awesome tractors.

Splicer Designs has a video installing led lights on a 2610. He did a really good job.

Use the ac compressor intermittently in the winter to solve the fogging issue

Thanks

whoa whoa whoa that's a '70 fastback Mustang 🐎!!

Last Friday my new tractor went in to the dealership for 1st service, it has 77hrs on it. This morning I received a call, thought they were going to say it's done, on its way home. Nope! They found a problem, unfortunately it's deep inside, he said they have to... ....Split the tractor in half. It's a Kioti DK 4720, I bought it new last year, question is, how upset should I be?

My NS 5310 did that thing with the 3point I added to the hydro fluid and it never did it again. Butch Ashland Ohio

Good overall vid !!!! I'm looking for my first tractor , to do various tasks , including plowing . My question is , do you run a field plow with yours , i was told this week i should not run/buy a hydrostat for plowing , but old style gears only , as the hydrostat won't take much and will fail if you plow . I have narrowed my search to Kioti , but dealer is long ways away -- TYM dealer is close , do you know anyone running TYM and if they hold up over time . I have definetly got the wrong job , :) --- Awesome Garage !

Try. I know this sounds dumb, turning on the AC then put the temp setting to hot and your windows won't go up. It remove the moisture from yhe cab just like in the summer! Give it a try, I have to do it my skidsteer for a bit then can switch it back to just the hester.

You need to run the a/c so it doesn’t fog up, mine doesn’t automatically turn the a/c on when I hit defrost, like a vehicle does. I have the nx6010 hydro

Maybe you could get your dealer to give you a demo tractor while yours is in the shop for repairs.

I just bought a brand new CS2220 little guy. It has a very hard time starting in the morning.

I don't get the hours thing with tractors. I keep seeing videos of guys who say they have had their tractor for a year and have 50 or 100 hours. HOW? I had my CK 2610 delivered at the start of October and am at 165 hours now. We are only seven and a half acres with llamas and goats. There has been snow to clear, but I just cannot imagine having this thing and keeping it parked for a whole day. Too useful! Also, your illumination pattern is weird. I see a lot better at night. Don't know if you could get the lights sorted out on a warranty, but those cat's eye spots on the ground are pretty extreme. Good luck as you carry on! Great video! Thanks for taking the time to make it!

I need to purchase the proper socket wrenches for my DK4710se. Do you know what size the lugs take and any other sizes or extension lengths I might need? Maybe you could recommend a brand?

How big is your barn ?

I have a 2018 Kioti ck2610 at has 1500 hour on it

Thanks the dealer seems like it has to be part of the equation especially in you put many hours on the machine weakly

fuel, grease and tighten bolts - every 8"ish" hours. stuff doesn't come off. I know the few bolts that come loose regularly. Dealer is everything mine is awesome but it costs money to fix stupid things you do and I've done a lot!

A light bar on the roof let there be light

are you sure you have had that a year... sure looks awfully clean. HaHa

I won’t a 1000 or 2000 review