Watched two of your videos so far. On the money!!!! - Can't thank you enough.
@carolf44133 жыл бұрын
Thank you! This explanation and visual was exactly what I needed! Especially the detail about where the dishwasher hookup piece goes. 😁
@Walt.20132 жыл бұрын
I've watched a couple of your double kitchen sink drain videos and appreciate your ability to teach. Always nice to see work done neatly and professionally. Inspirational!!
@Ratlins93 жыл бұрын
Thanks for making this video, very helpful. Unlike other videos, you explained the plumbing parts you were using .
@PROSDIY3 жыл бұрын
You're very welcome! Thanks Ken!
@yolandahebert2350 Жыл бұрын
Yeah, this demo was amazing! Straight forward , to the point., and easy to follow. Best that I have seen yet. It's not rocket science. Thank you very much!
@jonathanklopf75819 ай бұрын
I don't know if this guy is licensed but he did it correctly, great job and video.
@ScottSellsSoCal3 жыл бұрын
Having drains with this pipe, is the absolute best way! You can hear the difference.
@Norquay.MikadoАй бұрын
Thank you. Excellent. You're video is direct and to the point.
@billhill8615Ай бұрын
Double kitchen sink
@MAGAMAN Жыл бұрын
Nice to see someone not installing those home depot garbage kits. I installed one and regret it.
@johngale466 Жыл бұрын
Great job. I wish they all went that smooth.
@victorlin80983 жыл бұрын
Thank you so much for your sharing :-) , your step-by-step instruction is really helpful
@lj4434 Жыл бұрын
I really appreciated your tutorial
@iamdeadsilence3 жыл бұрын
This was another video that was exactly what I needed to know. Thank you.
@spmcco8 ай бұрын
Awesome video. The crap that was cut out looks like like something that was installed in military housing.
@torobravo80234 жыл бұрын
Like it ????? I love it !!!!!! thanks for te lesson,yes Sir !!!
@jeffperra5 ай бұрын
Looks good. Wondering why your p-trap doesn't have it's own little clean out on the bottom so you don't have to disassemble the fitting closest to the wall.
@PROSDIY4 жыл бұрын
𝗔𝗺𝗮𝘇𝗼𝗻 𝗔𝗳𝗳𝗶𝗹𝗶𝗮𝘁𝗲 𝗟𝗶𝗻𝗸𝘀 Basket Strainer: geni.us/qG25Atp Lennox Plastic Saw: geni.us/KBton9G Reed Tubing Cutters: geni.us/n7lyx 1 ½” ABS Dishwasher Wye: geni.us/QSlb6F Disclosure: Pros DIY is an Amazon Associate. We earn a small commission from qualifying purchases through our affiliate links at no additional cost to you.
@scott.c9587 Жыл бұрын
I heard about doing this to keep me pipes from sliding off. I like it
@frenchy1284 жыл бұрын
Great video! Thanks for sharing this, very informative, and step by step for a beginner like me
@PROSDIY4 жыл бұрын
Thanks for the feedback! Take Care!
@Marcoosianism3 жыл бұрын
It always disturbed me to see drain outlets installed so high. Really tests the limits of how short you have to make the sink drain outlets! Is there a reason why the drain outlet couldn't have been made lower in the original construction? I've seen so many installs where the main drain outlet is higher than the entrance level to the p-trap. Does this configuration not work at all or just doesn't work well? Excellent work, btw.
@PROSDIY3 жыл бұрын
I agree 100%. The rough-in drain is way too high in this install. I usually rough mine in at 16" from floor, but I always check to see what style of sink is being installed. Some sinks have extra deep basins and would have to be roughed-in lower.
@a.t.7021 Жыл бұрын
Good job! Thanks for the feedback. 👍
@ryancaines30972 жыл бұрын
This is exactly what I needed...thank you
@terrynashhartmann84193 жыл бұрын
Outstanding! I just found your channel and subscribed immediately. I love the clear step-by-step instructions and the explanation of codes.
@PROSDIY3 жыл бұрын
Thank you! I'm glad you enjoyed the video. Cheers!
@user-vs1bh7dd8h4 жыл бұрын
Great video! If you were in my area, I would hire you to re-do our plumbing works. :)
@orlandosolis2860 Жыл бұрын
Thank you maestro. Exellent video.
@mohammedjamal7352 Жыл бұрын
thank you my dear i learn a lot
@dillwiggle23 жыл бұрын
For the p trap does it need the clean out knob at the bottom of the p trap just curious yours doesn’t have it.
@TatayOpaw3 жыл бұрын
nice content! thank you!
@jaimemendoza51633 жыл бұрын
Great video!
@oldarkie38803 жыл бұрын
Drain kits for 1 1/2" do not require glue, use nylon washers.
@suavemang10 ай бұрын
That's inch and a half tubular. This is inch and a half DWV hard plastic ABS.
@sarasabala62772 ай бұрын
I have this under the sink but water comes up on the other side from washing dishes. How do i avoid that? So annoying
@luisvilleza26873 жыл бұрын
Nice video thanks for sharing
@pbean56974 жыл бұрын
great video. great learning diy
@akshaypatil27853 жыл бұрын
Nice video... Thanks you
@ndsam8528 Жыл бұрын
Great job , clear enough . If the pipe runing out of the wall 4 feet , any slop required by code ?
@ewcamaewcama2 ай бұрын
Do you have a video when converting a double sink to single sink?
@jeffostroff4 жыл бұрын
I thought the plumbing codes require that TY to have a baffle in it, am I wrong? Also why is the kitchen being remodeled and no garbage disposal being installed? I have only seen one property here in S. FL that did not have a garbage disposal.
@PROSDIY4 жыл бұрын
Hi jeffostroff, I'm not sure what you mean by a baffle in the TY? Maybe we are using different terms? Garburators aren't as common in some cities in Canada because there are individual household bins that the cities pick up for compost. For example Calgary and Toronto have these programs. The reason there wasn't a garburator installed in this video is because it's a rural location on a septic system. Thanks for the questions! All the Best!
@Nic73203 жыл бұрын
I prefer using two traps going into a manifold made from horizontal wyes.
@michaelt13497 ай бұрын
Nice! I gave a thumbs up and subscribed! Can you use a Pex tubing cutter to accurately cut new ABS pipe in this video? Thanks!
@carrieloren34033 жыл бұрын
I got a clogged kitchen sink pipe similar to this. I removed the pipes and remove/clean out the clog but after putting the pipe back, the water won’t drain at all. What did I do wrong or what is it that I forgot to do? Need help!
@jacksplumbingvideos71474 жыл бұрын
That fitting @ 0:28 is a two way elbow fitting.
@PROSDIY4 жыл бұрын
Interesting. I've never come across or had to use this type of fitting. Especially in 1 1/2". Thanks for the info my friend! Cheers!
@phanthanhhoang Жыл бұрын
thank you! could you share the link to the entire kitchen sink drainage?
@stagesimple89735 ай бұрын
Hey don’t know if your still seeing comments but I have my first kitchen sink repipe job Friday … do you ever use trap adapter 90s instead of needing to glue that extra piece of abs between the regular 90 and trap adapter ? Wondering if there’s any flaws with using the trap adapter 90s 🧐
@RES_Plumbing-Drain4 жыл бұрын
good video, keep it up
@PROSDIY4 жыл бұрын
Thanks Demitri B.!
@JeffLifeInReview2 жыл бұрын
More great education.
@scarscar27719 ай бұрын
So basically if the homeowner wanted a disposal they are screwed because the rough plumber put the rough drain too high in the cabinet?
@denisel47368 ай бұрын
Could you get a taller cabinet base and make the countertop and sinks higher to accommodate a disposal? Might not be 'code' but that's an idea....
@djpcinema7 ай бұрын
Beuuuutiful
@serenitymanor31912 жыл бұрын
Hello what is the heavy black piece that looks like a tiny black tire that’s hanging, what’s the purpose of it¿
@Maverick06723 Жыл бұрын
No all good thanks set up the same is that one good video in Australia comes into kits A kid to join the sings together And a cute with the loop and you need to loop to stop it from smelling some videos showed just straight out But I guess it smell
@LuxzonTharmarajah3 жыл бұрын
Hey, great informative video. Had a question regarding cleanouts. How would you incorporate a cleanout to this drainage setup?
@qwertygerfin2 жыл бұрын
Buy a p trap with a clean out.
@marleecampbell82032 жыл бұрын
I’m just returning back to residential wood frame plumbing after high rise and commercial plumbing. Haven’t trapped a double sink in a couple of years and wanted to know what hacksaw you used at the beginning? Looks like a Lennox but wanted to be sure. Thanks!
@scottshaddock29872 жыл бұрын
I am wondering what the vertical drop from the strainer to the centerline of the drain is. Mine is 4 1/2 inches-11.5cm and I am wondering if that is enough for this install-looks like yours is tight also-thank you
@wagnergitirana3 жыл бұрын
Great job! You sound Canadian. Is it a norm in cold regions to use ABS piping for drainage? Or anything else? I was looking for a good tutorial for my kitchen plumbing project. Cheers from Houston, Texas.
@PROSDIY3 жыл бұрын
Thanks Wagner! It is more common to see ABS in residential homes here. It comes down to what your local supplier carries more of. ABS is slightly faster to install because it uses cement only, and PVC uses a primer and cement for it's connections. You really can't go wrong with using either ABS or PVC. PVC has a higher heat resistance and I think this is why it's the preferred tubing in the States. ABS will warp if left in the sun. I learn so much from these comments. Someone referred to ABS as California fittings because apparently they mostly use ABS there. If I were you I'd use the piping that is most common and approved in your area. You're correct, I'm from Alberta, Canada. Cheers from your Northern friend :)
@acidfuzzpedals99862 жыл бұрын
Thanks for the video. Very helpful. I am wondering why you don't use male end trap adaptors? This saves the step of cutting small sections of 1-1/2" pipe to fit the lower sections. Is there a reason for this, or is it just your personal preference?
@michaelmcguire88112 жыл бұрын
Legitimate thought/question: you said not to have the drainage run "up hill", then proceed to put in a p-trap which goes down, then up. I have always been under the impression that as long as the drain doesn't try to go higher than the source, it's ok. Their original install went "uphill" but not higher than the bottom of the basin. So there's no reason it wouldn't work, right? It wouldn't work for the dishwasher install, true. But for a simple sink install, it would be alright. Theoretically.
@tristancameron7145 Жыл бұрын
P-traps are designed to hold water to prevent methane gas from coming from the septic/sewage up to your living space. The original plumbing before he removed everything would gaurenteed drain very slow. The only portion of waste piping holding water should be the P-trap. Deep trap is always a poor idea, theoretically yes it will drain but you will fail inspection everytime
@johnwendell5374 жыл бұрын
Great info! How do you know if a vent is needed? There is an ABS vent stack on the outside of my house, can I assume its connected to the kitchen sink drainage? Washington state, 1940s home with updated plumbing
@PROSDIY4 жыл бұрын
Hi John, How does the drain rough-in enter the cabinet? Through the bottom or the back? If it's coming from the back of the cabinet, I would assume it's connected within the wall. Another way to tell is to check in the attic if a vent pipe is coming up above the sink area. It is common for the kitchen vent to enter into the attic and then run horizontal and tie into the main vent stack, or it can pop out of the roof as an individual vent as well. By checking in the attic you can confirm that it is the kitchen sink vent that you are seeing exiting the roof. Hope this helps. Good luck and let me know if you have anymore questions. Thanks!
@johnwendell5374 жыл бұрын
@@PROSDIY drain is through cabinet bottom and the vent stack comes from the corner of the house exiting to the outside and running up external corner. The sink is 6 feet away from this corner. I went ahead and plumbed without air admitter and it seems to drain very well. Thanks for responding , well done video!
@PROSDIY4 жыл бұрын
@@johnwendell537 Thanks! Nice job on your project. Take care!
@jaffahosseini66418 ай бұрын
well down
@destroyingthings71854 ай бұрын
you don't have a event for this drainage ?
@thehandsoftime12 жыл бұрын
Can you provide a parts list?
@jacksplumbingvideos71474 жыл бұрын
I use two p traps with a double y
@Tallstan3 жыл бұрын
I’m doing a sink in a newly framed wall, is there a code height from the floor for the outlet into the wall?
@PROSDIY3 жыл бұрын
They're a few factors that determine this. Height of countertop, depth of sink, garburator or no garburator. Most standard kitchen sinks are roughed in at 16" - 20" from the floor to center of drain. There's no code for height of the drain outlet in the cabinet. Too high is a big problem though because it may not have enough slope to drain. Thanks for the question.
@anthonytran75663 жыл бұрын
Subscribed and like...
@karenschmidt1053 жыл бұрын
Why is there no clean out on the P-trap?
@PROSDIY3 жыл бұрын
Just a personal preference. I've seen way too many leak from that style of p-trap.
@liandrafahey40823 жыл бұрын
don't you need to vent the drain?
@PROSDIY3 жыл бұрын
The vent is connected in the wall behind the cabinet.
@mariomarrelli12452 жыл бұрын
where does the cleanout go ?
@JohnCornellier2 жыл бұрын
If the P-trap is a "union" i.e. it screws on, then that serves as a cleanout.
@robertmartinez12284 жыл бұрын
Hello there,Robert here,i'm curious,how much do you charge for a job like that.
@PROSDIY4 жыл бұрын
In my area a job like this would be around $150-$175 CAD. Thanks for the question!
@bajtre3 жыл бұрын
Hi, I have problem with gurgling sink in my kitchen and noone seems to know how to fix it :D I was watching through your videos, and I think i have issue with ventilaton, but here you do not seem to install ventilation valve and in other video kzfaq.info/get/bejne/mt2Df711xpauaIE.html you do install it. Is in this case already connected in the wall and going to roof or something?
@mv804012 жыл бұрын
Look up Studor or air admittance valves which can be added and will fix your issue.