Phanteks NV7 Case Build - let's ADD MANY fans!

Рет қаралды 70,935

Жыл бұрын

We first saw the Phanteks NV7 chassis at CES earlier this year. Leo gave us an initial rundown of the specifications as well as showing off some of the NV7’s quirky new features. However, some questions were left on the table after that video, so today James will try to answer those questions during a full review of the NV7. So stick with us and let’s find out just how good (or bad) this new case from Phanteks really is. Read more in our written review: bit.ly/41djBQt
00:00 Start
00:43 Pricing, versions and accessories
01:31 Close up / design / front I/O
02:40 Controller / management / mounts
03:06 Taking the panels off / inside
07:07 Radiator support / fan mounts
09:12 Removing parts and case support
11:19 Back of the case
12:42 Side of the case / cable management
14:39 2nd Gen Phantek DRGB / filters / feet
15:52 The hardware for the build
17:26 Build timelapse
25:36 Build done
27:47 James found an issue - Phanteks statement
30:03 Thermals and noise
31:42 Closing Thoughts
Discord invite link: discord.gg/4cqFSWY
Steam Community steamcommunity.com/groups/kitguruofficial
Be sure to support us on PATREON www.patreon.com/kitgurutech and read our MANTRA on HONEST REVIEWS Here: bit.ly/2BopnF9
KitGuru uses a variety of equipment to produce content:
As of May 2019:
Panasonic GH5 and GH5s Cameras
Panasonic GH4 Cameras
Panasonic G7 Cameras
DJI OSMO Pocket Cameras
Canon Cameras
Various PC builds
Final output - colour grading/titling etc:
iMac Pro 18 Core/Vega 64/128GB
iMac 2019 9900k Vega 48/64/1TB
Adobe Premiere Pro CC (PC)
Davinci Resolve Studio 14/15 (Mac)
iPad Pro 12.9 inch (2018) machines with LumaFusion
Final Cut Pro (Mac)
Visit our facebook page over here! KitGuru.net/
Visit our Twitter page over here! kitgurupress?lang=en
#phanteks #NV7 #chassis

Пікірлер: 174

@oxocanDOTcom 6 ай бұрын

This is exactly what i added to my shopping basket. Amazing that you showed us the basics and the final feel. Thank you!

@XMegaJuni Жыл бұрын

Great review and talking points. Good length and in-depth discussion.

@canarychrome7012 Жыл бұрын

i love your builds James, i watched the timelapse first!

@facemcshooty9274 Ай бұрын

the level of design that went into these is just fantastic , lightyears ahead of tha competition , fantastic cases

@EmoEmu Жыл бұрын

The 2-fan space on the back would fit the new Alphacool Core Distro Plate 240mm quite nicely.

@bonanzabrandon6877 Жыл бұрын

I like how with this case they took the side intake concept to it's natural conclusion, and pushed it all the way to the side panel.

@Omega-EP 4 ай бұрын

"It is natural conclusion"?

@KenOtwell Жыл бұрын

I just love the soundtrack! Thank you.

@gaming_allowed Жыл бұрын

i knew i wasnt going mad, i bought the case last week from overclokers uk and built my machine with 140mm intake fans on the bottom and i had the excat same isue. i just put 2 screw in and it holds it down. i really do like this case and i vertically mounted my gpu which it awesome. i know the say they say you can only put 4 120mm on the side wall but i manged to fit 3 140mm using tie wraps and it works

@Wimpelmann Жыл бұрын

What Gpu mount did u use?

@gaming_allowed Жыл бұрын

@@Wimpelmann hi i used the following Phanteks Vertical GPU Mounting Bracket with PCIe 4.0 Riser Cable SKU: CA-0B3-PT EAN: 0886523002918 MPN: PH-VGPUKT4.0_03R MANUFACTURER Phanteks

@ibrahimsonmez16 Жыл бұрын

That is a fantastic amount of cooling have to be careful not to get sucked inside that thing.

@2009numan Жыл бұрын

should have used a white version in the demo makes things clearer to see in a video

@sethporter3145 Жыл бұрын

That was the most relaxing PC build I've ever seen.

@DangerGnom Жыл бұрын

the cost of the case is doubled if you populate it with 12 fans. Overall a nice showcase, if you have the money.

@mimmocastiello9099 Жыл бұрын

in italy 3 fans 100€, and the case 250/290€ 😓

@stevewatson6839 Жыл бұрын

This is going to be another part of my ridiculously expnding case collection! LOL!!! Ronseal of Approval on the review.

@diamondheat9 Жыл бұрын

Ty for the build but could I ask you for a measurement on this case? Can you measure the top space from the top rail(side panel) to the back where the power supply sits? I know it fits 120mm fans but want to see if it can fit a Black Ice Nemesis GTS rad as that is a little wider than regular radiators.

@abeidsalim8008 Жыл бұрын

It looks like a lian li but bigger! I already have the xl version if I didn't have I would have bought this. Its a massive beautiful case.

@ronnyspanneveld8110 Жыл бұрын

lianli xl 68,86L Phantex 78,87L but the lian li is way better for custom water cooling... oh the nv7 weighs 17 kilo's :P the XL is 13 kilo's :P

@RafaelSilva-yv3oh Жыл бұрын

@ronnyspanneveld8110 as a custom water cooling builder usually. I got rid of the O11DXL cause it felt too small. When you are used to proper full towers, the O11DXL ain't really that big or versatile. This NV7 looks like it would fit a nice Alphacool 360mm monsta in push/pull at the top, while still housing 2 more 360x60mm rads, something that can't be done in the O11DXL. But even still, I'm curious on how will the NV9 will compare to the NV7, but to me, the NV7 clearly looks like a better watercooling case than the O11DXL.

@gats2228 Жыл бұрын

Can you fit Lian Li Strimer on that 24 pin? I'm thinking maybe around the light bar, but I can't tell just from the videos 😕

@ayazoyunoynar Жыл бұрын

Finally an NV7 build!

@fairycat Жыл бұрын

Pretty thing. Thanks for build.

@bilL_at4k Жыл бұрын

Thank you for the great video and all these details on this magnificent case! I'm not so experienced on creating such builds and i have a question.. You have 9x120mm exhaust fans there and only 3x140mm intake fans? Won't this create a problem with the air flow? Thank you again.

@xLaSoMBrAx Жыл бұрын

I would go intake on bottom and wall. Exhaust back and top. I was about to ask the same thing.

@neshco Жыл бұрын

Exactly. It can be regulated by rpm adjustment, but it would be a lot of power to the 140s and minimal rpm at the 120s. Strange decision.

@shanes1676 5 ай бұрын

Same here ...same question?

@Nodnarb69 7 ай бұрын

Hey man im gonna be building my pc in the nv9 and im inexperienced, so i got two aios and one of them is a 240 and im gonna put it on the side. Im gonna do push pull on it and i was wondering if it would be best to leave the other fan slots on the side empty, or fill them in with fans?

@Kentish9494 Жыл бұрын

do like the look of this case, really torn between this and the H9 probably the H9 as my 280mm AIO wont work in the Phanteks case and i dont want the expense of buying another AIO

@EmoEmu Жыл бұрын

Another way to use that space at the top could be a nice info-screen.

@waitandhope Жыл бұрын

Very good design, I want it

@bmudri Жыл бұрын

How is the fan controller managed with daisy chaining? up to 16 fans? how many fans in each port? Thanks in advance

@zroutt1 Жыл бұрын

Awesome awesome build and great video and edits. Curious what you used for the Radiator hose seperators?

@alcovitch Жыл бұрын

plastic clips that come with the AIO

@rip.tear. Жыл бұрын

Great review, actually populating all the fans like 99% of owners will do. It would've been nice to see a higher-spec GPU though as I think most people who buy this case will be running something which uses more power.

@JosePto Жыл бұрын

This thing is impressive and expensive af at €250 imported from Germany. Things are getting truly tough here in Spain :( The empty top part is screaming for an screen mod.

@Noodlepunk Жыл бұрын

I was thinking exactly the same thing. Or may a cut screen with some LEDs in the back.

@dkmaxie Жыл бұрын

looks great but gets spoilt by the aio pipes on the right, can they not go the left side?

@416_e_meth Жыл бұрын

wonder know is this case compatible with corsair rm850x shift, which is a PSU with a side connector interface.

@michaelbp_ Жыл бұрын

Love the build, case looks great. Will be interested when they release a smaller version as that empty space above the mobo irks me lol.

@JeremyArchie Жыл бұрын

I get that. I'll be using this case with a push-pull rad setup up top...T30 fans on top, and RGB fans on the bottom. The space up there is perfect for me.

@ToanNguyen-mh2bb Жыл бұрын

@@JeremyArchie Even with a push-pull setup, there will be still a lot of empty space.

@JeremyArchie Жыл бұрын

@@ToanNguyen-mh2bb Not a problem for me. I'm just glad the space is there. I have ideas for a small display-panel as well. I'll see how that goes.

@Blacksadify Жыл бұрын

Many people will likely add a stat display mounted in that space, which would look really great. That's what I'd do.

@haies09 Жыл бұрын

Seen a build with a sensor panel there already, must admit, it looks nice

@2009numan Жыл бұрын

the video out ports on the gpu would be tight with that mesh back on

@Me99adon Жыл бұрын

Really wish those were d-30 fans :( I wanted to see how you hook all 12 up...I just bought that setup.

@ryancowles5633 Жыл бұрын

My custom painted Corsair 5000D airflow is about to be replaced for a custom painted NV7...maybe an NV5 if it's big enough and the reviews are good

@DoktorHaus014 Жыл бұрын

Why 3 fans for intake and 9 for exhaust??? It`s insane. Otherwise, nice build and the idea for the control screen above motherboard is very interesting. Might do that myself.

@joeymadden7456 Жыл бұрын

They make reverse polarity fans...

@tonikallinn Жыл бұрын

@@joeymadden7456 Didn't he say that every fan was exhaust besides from the bottom? @ 25:57

@Nuriil 9 ай бұрын

@@joeymadden7456 thats not what reverse fans looks like 🤦‍♂

@vrekman256 Жыл бұрын

hi! Did you manage to boot 64GB of ram @ 6000MHz? with 4 sticks? if not, what speed did you manage finally? Thanks!!!

@JeremyArchie Жыл бұрын

Finally found a 'worthy' replacement for my Evolv X. I don't need it, but I certainly do want it very much. That space in front of the PSU shroud will be filled up very nicely with a push-pull rad setup. My only concern is if that will fit with the two 120mm fans on the rear at the same time. 🤔

@ladis79 Жыл бұрын

I am in the very same situation, the only problem is, that looking at my silver Evolv X right now, I still realize how beautiful case it is...What I really don´t like about NV7 is the empty space above the motherboard, looks weird IMHO.

@danielgarcia1484 9 ай бұрын

where to connect fan cables??? there are 9 fan cables is there a hub or something what does the case have for those?

@rikachiu Жыл бұрын

I am sure V1tech is watching and will release some nice custom rgb plates for that extra space up top :)

@Rageousss Жыл бұрын

I should be getting mine any day now. Anyway, has anyone built in one with a 24-Pin Strimmer?

@JJ-gk5tn Жыл бұрын

Where can I buy the drgb controller ?

@pinkyizthebrain2397 Жыл бұрын

Waiting on this case just to get my new build.

@ghostfoxxx Жыл бұрын

one qestion: why the fan below near to the fan on back, create IN and istantly OUT of fresh air without touching any other parts? first fan below push air directly on the last fan on back ... in don't know why this choise

@bemindful924 Жыл бұрын

Magnificant Dutch design.

@Racinls1 Жыл бұрын

That big gap above motherboard be perfect for small display

@lucifersheadscarf6988 Жыл бұрын

Yeah that’s a good idea

@Digikidthevoiceofreason 11 ай бұрын

He did say that in the video. Pay attention next time.

@Justmakesomenoiz Жыл бұрын

Dunno if they sent you the case but a shame they didn't add the new D30 fans into the build. And that you had to build with older fans. And also the builds I've seen is using 7 fans for exhaust and 5 for pull. That's what I was hoping for. First one that used 140mm in the bottom and the rest 9 fans for exhaust. Would be nice to see if there is a difference with 12 of the D30 fans and in another config. Good review though. Still reluctant if I'm gonna keep my nv7 which is arriving tommorow or if I shall send it back and just go for a normal case like lian li lancool 3 or perhaps lian li 216 instead.

@KitGuruJames Жыл бұрын

Unfortunately the D30 fans didn't arrive in time. I'll try and look at them in some future content.

@Justmakesomenoiz Жыл бұрын

@@KitGuruJames seen several that had some QC problems with them already. Several has been DOA and the plastic clips aren't aligning as they should so no way to daisy connect them. Let's hope that phantek sorts this out as soon as possible.

@adventureswithrusty2012 7 ай бұрын

Can you not remove the narrow mesh vent on the reverse side? You left it on the case when removing all the panels and did not mention anything about it. Would be a pain that all the other panels remove for cleaning except that one?

@ElusiveAura Жыл бұрын

Is there a reason you have the 4 fans on the back/side exhausting and not intaking? Would it not provide better thermals with the side/back and bottom intaking and the rest exhausting (top and rear)?

@vVvCuhRazy Жыл бұрын

The manual recommends how he has them installed but I agree with you. I feel those switched to intake would be much better.

@cem8258 Жыл бұрын

That is a pretty chunky case might be tough to find a home for it around the desk.

@jarredhasaids5391 Жыл бұрын

how would you install an GPU weight supporter for, lets say an rtx 4090, with the buttom fans being installed at the same time ?

@JayzBeerz Жыл бұрын

you can't

@Zed091 Жыл бұрын

i have an ssd but my pc doesnt boot up that fast 24:02

@BleepBlop-rh9lm Жыл бұрын

I would absolutely buy this for a custom loop build. Unfortunately I've just finished my new build on Thermaltake view 51 snow :)

@ronaldridgeway9779 6 ай бұрын

My question is which one would you get? The nv7 or nv9?

@nadtz Жыл бұрын

It will be interesting to see if in a few years the whole glass + RGB aesthetic goes the way riced out cars did. While there are a lot of neat things about this case personally it's ugly as sin but I know I'm in the minority on that, at least right now. Case aside always a joy to watch your vids.

@johnsonaustinj Жыл бұрын

RGB has been around for over a decade, I doubt it's going away. (It's popularity may ebb and flow I suppose) And yes, I think you are definitely in the minority on the case aesthetic, I love it. I think a fair argument can be regarding wasted space though.

@AhatOzbek-bf2gr Жыл бұрын

Wish there was an easy way to stop dust building up inside.

@overclockingdemon7179 Жыл бұрын

wow what an awesome build james - certainly showcased what that case will do. You would really need to factor in £50 for fans for that case, surely..... right?

@MikeKrasnenkov Жыл бұрын

3 sets of D30s will cost as much as the case itself, which is crazy

@iamahappybunny7640 Жыл бұрын

£200 ?

@KitGuruJames Жыл бұрын

At least. A 3 pack of M25-120 fans is around £35.

@boltsandbraces6261 Жыл бұрын

thats a stunning build and a stunning case - how much did that build cost with all the fans ? how much are those fans anyway? its a brand I havent looked at for fans.

@KitGuruJames Жыл бұрын

M25-120 3 packs are around £35

@Pyriel2 Жыл бұрын

Can you use the fans in the case controller AND also run the fans through rgb software for better control?

@edwinwelch1946 7 ай бұрын

I have the white version and I love this case but the lack of dust filters is bonkers on such an expensive case.

@plantronix2011 7 ай бұрын

Спасибо, великолепный обзор!

@gblair999 5 ай бұрын

How many fans should we put in our new case? YES!

@buyingastairwaytoheaven5252 Жыл бұрын

Expensive. But i do quite like it. You would need to budget a lot of money for fans as well. So that needs factored in.

@messydarkkiller1 11 ай бұрын

I’m stuck between this case and the H9

@Digikidthevoiceofreason 11 ай бұрын

So no Corsair Shift psu at all will fit.

@tjp4342 Жыл бұрын

WHERE IS BALDY?!? OMG! THIS CASE WAS MEANT FOR HIM!

@KitGuruJames Жыл бұрын

I'll send it to him for his birthday.

@tonybailey89 Жыл бұрын

Love the build but this is an awful lot of exhaust creating a very nagatibe case pressure which will make the case quite dusty very quickly, I think it's designed to have those 4 side fans as intake as well which would be perfect. I absolutely love the 3 140 mil fans at the bottom as intake as it fills the space up so much better in such a large case! Safe to say I'll scrap my plans for the Lian Li 011 Dynamic EVO and go with this instead! Very tastefully done in form and function

@KitGuruJames Жыл бұрын

The side exhaust fans were mainly there for looks as the back of M25 fans isn't so pretty.

@tonybailey89 Жыл бұрын

@@KitGuruJames the asthetic certainly benefits from them mounted in that way. If that's the focus in such a showcase style frame then I totally understand. Looks like Phanteks made the brand new D30-120 RGB fans in both backward and forward flowing configurations just for this reason. I wish they'd make some D30-140 fans in the same as they fill out the bottom of the case so much and flow nearly twice as much CFM

@geroldbernal6280 Жыл бұрын

what would be the smallest psu you could use with this case

@Digikidthevoiceofreason 11 ай бұрын

Pico sized 😂. Don’t expect it to work though.

@mightyakkylex 7 ай бұрын

Did you end up taking the gpu off to put the bracket at the side of the mobo in? 😆

@mightyakkylex 7 ай бұрын

I installed 3 arctic F14 fans at the bottom with no issues 🤔

@KOT-ANGRY Жыл бұрын

I want this case 😢, i will use Seasonic PX-1600 PSU, i7 10700K, ASUS Z490-P motherboard, RTX3080 Noctua and for CPU Deepcool air cooler. Looking on Phanteks M25 fans (12x 120mm), but i need to collect money for that case and fans 😢

@jadamsnz Жыл бұрын

Another gorgeous video. One major consideration for me would be that, unlike cases without side fans, you can't push this case up to a surface like the side of your desk or a wall so you end up with a pretty mammoth case taking up even more space. (Well technically you could push the window side against a surface but what's the point of that?) Also, a question about the number of intake fans vs the number of extraction fans. Why? Surely that will result in a negative internal pressure reducing the effectiveness of the AIO and also sucking dust in through every little crack that isn't covered by a dust filter.

@Goryglory0209 Жыл бұрын

No dust filters???

@yougrin Жыл бұрын

Hello. Fans on top - they exhaust warm air from case through CPU radiator ?

@KitGuruJames Жыл бұрын

Yes.

@yougrin Жыл бұрын

@@KitGuruJames is it ok ? Waiting for delivery of NV7 and pack of D30, still thinking about radiator placement. Maybe it will be better to mount radiator on the side for intake?

@KitGuruJames Жыл бұрын

@@yougrin it depends whether you want to prioritise CPU or GPU cooling. If your priority is CPU then install the AIO rad on the side mount with intake fans, with bottom intake fans and top/rear exhausts. If you want to prioritise GPU cooling then install the CPU radiator in the roof with exhaust fans. If I was to build a gaming system in this case that will be used daily, I would have intake fans on the side/bottom fan mounts and exhaust on the top/rear fan mounts with the CPU AIO in the roof.

@yougrin Жыл бұрын

@@KitGuruJames Thanks.

@Jamester2 Жыл бұрын

There is a problem with this case: the back web should be removed for plug sound jacks, DP cable so whats the sense of setting up a web door on back?

@kalitvenec Жыл бұрын

cool

@2009numan Жыл бұрын

had a lot of exhaust fans

@austinw4747 Жыл бұрын

What size are those bottom fans

@KitGuruJames Жыл бұрын

140mm

@saiyandadfps8349 Жыл бұрын

My man did 3 intake fans and 9 exhaust 😂

@Wthrs Жыл бұрын

If only it would fit my Corsair RM1000X shift psu

@2009numan Жыл бұрын

would look a bit daft with an itx mobo in a case that size LOL

@annettesurfer Жыл бұрын

9 exhaust fans and only 3 intake fans is the worst ventilation I've seen in a long time but that's more on the installer than Phanteks. I've heard there are some newer fans that have reverse flow but the M25 fans are conventional. Normally with negative airflow this bad it'll pull from the unfiltered spots but I'm not even sure there's any openings left to draw air into the case. Well there are small areas in the rear to allow dust laden air into the case so I’d say while the case looks nice, it’s functionally a mess. Which highlights a weakness of this case…the lack of filtering. Phanteks, like Lian Li, tout their mesh as a filter but with the Phanteks mesh hole size known on their other cases to be 1mm (as opposed to the larger 1.5mm hole size in the Lian Li mesh screens) I can only assume the mesh on this case is also ineffective as a dust filter as well. Worse now since this is an extreme negative pressure build. The assembler decided to go for looks over functionality. That is going to be one hot dusty box. That is the epitome of a brain fart.

@KitGuruJames Жыл бұрын

The fan orientation was like this for aesthetics only. If I had the new D30 forward/reverse fans at the time of the case review the side fans would have been intakes. Unfortunately the D30 fans arrived a few days after filming.

@wankerka Жыл бұрын

The only thing that i dont like from this case is the big square thingy above the Motherboard placement. I know its were the PSU is mounted, but if you look at the front its just a waste of space!

@swizzler8053 Жыл бұрын

Yup. It doesnt look right.

@javierdemiguel9790 Жыл бұрын

🤣🤣🤣WE WANT TO SEE LEO WITH CUSTOM LIQUID COOLING🤣🤣🤣

@swizzler8053 Жыл бұрын

Radiator placement is so messed up in this large case.

@mrchilled Жыл бұрын

D30 fans look sooooooo much better than these. Really good and comprehensive review though, thanks.

@jean-phil 4 ай бұрын

I like this case but it looks much better with phanteks d30-120 fans imho ..

@maupaybs Жыл бұрын

Not sure about that angled bottom of the case.

@wankerka Жыл бұрын

YOu should have used a 4090 for this build, and also the new reverse fans from Phanteks

@lucifersheadscarf6988 Жыл бұрын

I think you meant could. Not should. Pretty sure he used what Phanteks sent him

@KitGuruJames Жыл бұрын

Those fans didn't reach us in time.

@Sprox-59 Жыл бұрын

Surely you could have got another couple of fans in there.

@KitGuruJames Жыл бұрын

😂

@bowhunterxxx Жыл бұрын

Why negative pressure a dust magnet this way????

@KitGuruJames Жыл бұрын

Dust magent either way as there's no dust filters, other than the bottom.

@bowhunterxxx Жыл бұрын

@@KitGuruJames The only one that you need to clean is intake on a positive the 4 on the side should be intake then you have a fillter at the bottom and the rear panel to clean, not every crack on the case which you make an intake when you have created a vacuum inside the case. The clean up would be minutes if done positive not hours as it is set up NEVER have a negative pressure in your case!!!!!!!!!!!!

@KitGuruJames Жыл бұрын

@@bowhunterxxx ultrafine mesh doesn't work that well as a dust filter. So using the side as intake will pull in as much dust than all those exhausts. I would use the side as an intake with different fans but the back of M25 fans isn't so pretty. They were placed as exhaust more for the looks.

@bowhunterxxx Жыл бұрын

@@KitGuruJames, You don't seem to understand negative pressure do you? You will have dust everywhere every non-air-tight part of the case where if positive pressure you will only have 2 places to clean been building pc since they came into existence. Airflow direction would also be better.

@KitGuruJames Жыл бұрын

@@bowhunterxxx I understand negative pressure. I have built, upgraded, repaired and modified PC's since the mid 90's so don't worry about my experience. What you need to understand is this is a showcase system, it's already been disassembled so it never had the chance to build up dust. As I've said in a previous comment if I was building this for long term use I would have used different fans and had the side as intake. 👍

@XxAtomic646xX 5 ай бұрын

the 4 fans on the side should be reversed so they intake

@naapsuvaimne740 Жыл бұрын

what case for 5090 series?:D

@TwoSpiritPenguin Жыл бұрын

Well thats a way to sell those 140 fans

@pillepolle3122 Жыл бұрын

why not use phanteks d30 fans

@Mattiedamacdaddy Жыл бұрын

Just add phanteks fans only $360!

@mastergamer721 Жыл бұрын

Why u look like the prisoner from bo2 zombies buried

@axelded13 Жыл бұрын

i hate the tinted glass. like if you are going for a no rgb build there is no way to see the parts inside

@abeidsalim8008 Жыл бұрын

Get the white one!

@KOT-ANGRY Жыл бұрын

I love tinted glass ❤, it feels more premium than without tint! Best tints so far have Corsair 4000D and 5000D 😊

@drxpsaucx4157 Жыл бұрын

Just get a light strip and set it to dim white around the glass

@LinusBerglund Жыл бұрын

I hate all glass. I don't want to see any internal components unless I open the case. If you do that you can get rid of the power supply shroud and let the lowest front fan have any function at all. I want a computer case for grownups without any glass or lights. Preferably with the aesthetics of the CDC 6600, or maybe 1990s beige. I remember the days when you could just rivet in extra hard drive cages at the bottom of the case without affecting the GPU airflow too much.

@user-yp1gs8vz2l Жыл бұрын

@@LinusBerglund bruh. Just get a dogshit case then. One of those old stuff they gave us in school back in the day