Klean Kanteen Leak Proof Café Cap 2.0

Klean Kanteen Leak Proof Café Cap 2.0 - How To Clean & Use

Рет қаралды 232,374

8 жыл бұрын

The Klean Kanteen Leak Proof Café Cap 2.0 is easy to clean, use and the best addition to any of our Wide Insulated Bottles. #BringYourOwn #Leakproof
We've made the Klean Kanteen Café Cap 2.0 easy to take apart and put back together for trouble free cleaning and use! Follow our user-friendly instructions in the video or down below to keep your Café Cap 2.0 clean. A clean Café Cap 2.0 will ensure it is working at its best to keep your Wide Insulated Bottle leak proof.
Our Café Cap 2.0 is made from 100% food safe material: BPA-free polypropylene #5 & food-grade silicone. Safe to use with acidic or hot beverages. Top rack dishwasher safe.
Want to upgrade to the Café Cap 2.0 or buy one of our Wide Insulated Bottles with Café Cap 2.0? Find them in the links below.
Buy the Klean Kanteen Café Cap 2.0: bit.ly/1tefpiP
Shop the Klean Kanteen Insulated Bottle Collection: bit.ly/1VP45VT
Buy the Klean Kanteen Café Cap 2.0 Maintenance Kit with Gasket Tool: bit.ly/2b4C528
CAFÉ CAP 2.0 DISASSEMBLY
To disassemble the Café Cap 2.0 for easy cleaning:
1. Twist spinner top into the open drinking position and hold in place.
2. On the underside of the cap, unscrew locking nut counterclockwise and remove.
3. The cap will disassemble into 5 pieces spinner top, cap, silicone valve, support disc, and locking nut.
4. Use gasket tool (not included) to remove clear silicone gasket.
5. Hand wash each part or place in dishwasher (top rack only).
6. Reverse instructions to reassemble.
7. All parts must be correctly replaced to ensure a leak-proof seal. Silicone valve will only seat properly when keyed in the correct location. Tighten lock nut completely until it stops turning and you hear an audible ‘click’.

Пікірлер: 107

@dpl04 3 жыл бұрын

cleaned mine for almost a year thanks!!! i didn't even know you can disassemble it looooollll my cap is so disgusting it has these black gunks all over it can't believe I'm still alive drinking all that water lmao

@jennifercolleenrobin 9 ай бұрын

Omg I’ve had mine for 6 years they’re so smelly no wonder I’ve never done this I’m so grossed out. Thank you!!!

@susiemui-shonk3102 3 жыл бұрын

lordy. i've had to watch this video each time to remember how to reassemble the damn lid.

@Raichle9 3 жыл бұрын

Just picked up a couple of the insulated tumblers at goodwill for $4 bucks each. I didn’t know how to wash the lids. This is great. Thank you

@helenhyeseungjung3758 6 жыл бұрын

From Korea, very useful information. Thanks a lot!!

@NibbleyNutz 5 жыл бұрын

Cleaned mine for the first time in 2 years, it was disgusting. But at least I know how to clean it now. It was really easy.

@oliviak3845 3 жыл бұрын

The klean kanteen is literally anything but clean

@bunmeng007 4 жыл бұрын

I finally can open and clean my cafe cap 2.0. Not as easy as in the video 😄

@BurnOmatic 7 жыл бұрын

exactly what i was looking for thanks for this video.

@lorilee1208 5 жыл бұрын

finally, i know how to clean it. thanks for the video

@lilic6786 2 жыл бұрын

Great video! Was wondering why therthat coffee smell I can't get rid of. After cleaning the parts I soak in vinegar and half water for a couple of hours and the odors disappeared. This is a great looking thermos that does not leak and needs attention like any quality item. Thanks again for this video.

@rbg7408 4 жыл бұрын

Thanks!

@tracyromano125 Жыл бұрын

Thanks for the video! Finally cleaned my cap. It already tastes like Tea, Hot Chocolate and Soda. Thought you cant disassemble it. Lol

@KleanKanteenOfficial Жыл бұрын

Glad to hear the video was helpful!

@meYogii_ 4 ай бұрын

sweet, I didn't know u could take it apart like that. Gonna go clean mine now when I know, might be surprised how dirty it is...🤢

@MikeWood 4 жыл бұрын

Is the TKwide lid disassembly done the same way?

@annefranks7080 7 жыл бұрын

@KleanKanteen ... Do any of those parts offer any adjustability with flow control? My Cafe Cap flowed nicely when I first got it but now it's a little slow / hard to get the beverage through.

@scirishrugger 6 жыл бұрын

Anne Franks loosen the locking nut just a little.

@kalingzeye 7 жыл бұрын

Same, I can do everything except remove the rubber piece... didn't have whatever tool that was. Damaged it trying, gave up.. :\

@runningoncoffee9072 Жыл бұрын

Parts do not just pop out like that. I had to use a butter knife to get the cup thing to come out

@zeffyL 3 жыл бұрын

Can’t they just make a flip coffee lid which does not require disassembly every time you need to clean it? This is not convenient. Also with this type of lid, its kinda hard to know if its open or not. So, if you are in hurry, you might put your klean kanteen in your bag without closing the lid or, you are ready to sip but you realize that you just close the lid a while ago.

@kiezoRrr 7 жыл бұрын

He used this tool: Klean Kanteen Wide Cap Maintenance Kit

@mocha7952 6 жыл бұрын

Actually, no. He used the Cafe Cap 2.0 maintenance kit. They're different and the one you mentioned says it doesn't work for cafe cap 2.0

@Tiffinox 6 ай бұрын

Thank you. Everytime I wash my lid I forget how to reassemble it 😅

@Aurora7N 6 жыл бұрын

So...mine actually does leak when there is warm liquid (or hot) liquid in there. I can hold it upside down (or mostly upside down at a slight angle) and a steady trickle will come out. That means the cap still works well when upright and such...it's not like I spill coffee down the front of my shirt or anything...but it's certainly a large enough issue that I couldn't just toss it in the air like ni this video or put it in a bag without care. I feel like I've done everything exactly as per this video (and the written instructions that come with it). Are there any tricks to this that are not obvious?

@AlexAyoub_ 5 жыл бұрын

Trying reassembling the cap as shown here and when tightening or loosening the cap, keep the mouth OPEN. When you have it closed and tighten/loosen, it will usually force some air either in or out (you are displacing a volume of air when you do this, so it has to compensate). If the mouth is closed, it will have to find a tiny space between the seal and the bottle for air to travel, creating a leak. When you leave the mouth open, the seal will maintain and there is no additional pressure on the system, so when you have tightened the cap back on completely, close the top and see if it leaks after that. This has never given me issues.

@gsuiza4121 6 жыл бұрын

How will I remove the dent 😭

@lmcdonald7036 7 жыл бұрын

What's the little toothpick thing he used?? Mine didn't come with one.

@jesd1096 5 жыл бұрын

Mine didn't too. You could use a toothpick though. :D

@hjhjh_ 5 жыл бұрын

do i have to disassemble it every time i use? too much of a hassel then :(

@halffast7799 8 ай бұрын

It literally takes les than 5 seconds.

@tayfhassan4095 3 жыл бұрын

What’s the cap made of ?

@SM-pn1pg 6 жыл бұрын

Kleen Kanteen coffee lids suck. How many times have i used one to have coffee run down the sides and onto my shirt? LOTS.

@NibbleyNutz 5 жыл бұрын

Must be user error.

@bahbcat 4 жыл бұрын

Do ya have the old kind? Oh, and ya have to actually close it to keep things inside.

@mamalovesthebeach437 4 жыл бұрын

The older ones definitely leak. I have the newer version with the metal handle and it seems to work much better. Loving the new one!

@mpetrides 4 жыл бұрын

The new Cafe Cap 2.0 that works with the TK Wide bottles is awesome. I can fill it with coffee, close the lid and flip it completely upside down without losing a drop of coffee.

@Innuendox3 4 жыл бұрын

Mine leaks also. How could I know if it is the new Cafe Cap 2.0 or the old one?

@raymondlawrencetabios2468 5 жыл бұрын

Tried this but mine is still leaking. So is this because of production or is it just like that?

@AlexAyoub_ 5 жыл бұрын

@jbmop 7 жыл бұрын

Thia don't come with the tool used to remove the gasket. I haven't been able to remove it, and I've already damaged it trying.

@zoeyloco 7 жыл бұрын

looks like a cocktail stick would do the job?

@ciaramacapinlac9860 6 жыл бұрын

jbmop yes me too 😤

@Flonkation 6 жыл бұрын

Mm its stuck in there pretty good

@manwiththecigar2606 5 жыл бұрын

Pair of curved tweezers will do the trick

@shiellacoquita 5 жыл бұрын

I did it with a knife... carefully haha

@Melanie-Shea 4 жыл бұрын

Leaks.

@rocargenaeats6251 5 жыл бұрын

Mine leaks. I don't know why 😑

@AlexAyoub_ 5 жыл бұрын

@beforedawn 5 жыл бұрын

So I don't have to go through this much trouble to clean my Hydroflask lids, or my Yeti tops. Nor do I have the issue with lingering odors after iced coffee drinks in those, and the KK lids still have the odor after they're washed? I don't have time for that.

@reddirtredhead 4 жыл бұрын

but are Hydro and Yeti Certified B companies? Not being snooty, honestly asking

@danikaneswati6987 Жыл бұрын

I bought this type in 2019 and use normaly, never fall down, clean as the instruction but now it losts its insulation function. the outer body is getting hot when i pour hot water. any advice?

@KleanKanteenOfficial Жыл бұрын

Hello Danik, Sorry to hear your bottle is no longer insulating properly. Insulation failure is a defect covered by our warranty policy and your bottle is eligible for replacement. Please reach out to our warranty department at warranty@kleankanteen.com to get your replacement bottle. Thank you and if you have any other questions, please let us know.

@msimantov 8 жыл бұрын

He left his shiv on the counter. How will he defend himself?!

@ChrisZirker 8 жыл бұрын

...use his stainless steel bottle as a melee weapon, maybe?

@BedCrunch 5 жыл бұрын

He is married. His wife will take care of it.

@patrickmcmullin9522 5 жыл бұрын

@@BedCrunch Um!I smell a funny trap!

@connieglore301 Жыл бұрын

Please advise. The parts of the lid are stuck and cannot be separated for cleaning.

@KleanKanteenOfficial Жыл бұрын

I'm sorry to hear you're experiencing that issue with your cap. It sounds like this may be a manufacturing defect which is covered under Klean Kanteen's warranty policy. Please reach out to our Customer Experience department at warranty@kleankanteen.com and they can assist you with this issue and/or send you a replacement cap.

@gardenman3 5 жыл бұрын

How tight are you supposed to screw that last piece on the bottom?

@liachang126 5 жыл бұрын

gardenman3 In the video description above: "Tighten lock nut completely until it stops turning and you hear an audible ‘click’." On the store website: "Do not overtighten bottom nut which will cause low flow" Somewhat helpful; somewhat vague.

@AlexAyoub_ 5 жыл бұрын

A couple of clicks is fine.

@Daniel-gf1zo 5 жыл бұрын

Can someone show me what happen when you turn it from close to open and open to close? How the Cafe Cap 2.0 works?

@bahbcat 4 жыл бұрын

It squezes the middle gasket against a rim inside. Compression.

@danimorales3023 4 жыл бұрын

ahh finally

@steveclark.. 7 жыл бұрын

Does this cap really not leak, even when the bottle falls on it's side or upside down??

@stevesoelberg 6 жыл бұрын

Steve Clark yes I travel with mine and throw it in my bag knowing it'll end up every direction and so far so good. Make sure you get the newest version, I just read that the 1.0 iteration did leak.

@VassilisProtonotarios 6 жыл бұрын

I have the first version of the cap and it surely leaks; I never dare to put my insulated bottle inside my backpack for this reason as it will not stop leaking until the bottle is empty :-(

@Nikkkkkkki 6 жыл бұрын

It definitely leaks the first time I used it I put it in my book bag and it leaked all over my Mac which was broken from liquid damage. If i had to do it over again I would not get this bottle get one that is leak proof.

@gardenman3 5 жыл бұрын

@@stevesoelberg how do you know if you have the #2 iteration?

@stevesoelberg 5 жыл бұрын

@@gardenman3 I worked an event where kleen kanteen was a sponsor so the rep told me that it was the second version I had bought. Unfortunately I don't know what markings would indicate that. I have also had some leakage :( even with the second model. When reassembling you can tighten the gasket more and it won't leak but liquid also come out super slowly when you pour.

@kathrynhiggins5949 7 жыл бұрын

cant for the life of me get the third piece off of mine - any tips?

@zenmom42 7 жыл бұрын

Yes! I had the same problem, and was baffled. In the video it looks as though it just sort of falls off, like the 2nd piece does. Turns out (at least on mine) you have to bump the bottom end of the spindle on the counter in order to loosen up the other pieces. After that I was able to take the rest of it apart and clean it.

@noshititskrae 6 жыл бұрын

I used a butter knife to pry it off. No damage done.

@BedCrunch 5 жыл бұрын

Why is my cap leaking in locked position after two weeks of purchase?! (Yes. The liquid was all over my bag, but I was so happy to find my phone miraculously dry!)

@CeceliaBDemented 5 жыл бұрын

It gets REALLY gunky in there. Mine started leaking, found this video and took it apart. It's super gross how gunky it gets. After I cleaned it, it stopped leaking.

@johnildineorquejo8285 5 жыл бұрын

I'm happy for your phone too!

@AlexAyoub_ 5 жыл бұрын

@chloeveloso2502 4 жыл бұрын

After I cleaned my cap and re-assembled it, my tumbler started to sweat when I'd put cold water. Please help. 😢

@pokemonXD1 3 жыл бұрын

I think you may be observing condensation

@RemziCavdar 2 жыл бұрын

That's normal, it's called condensation and will always happens regardless.

@LukeThomasPerth 6 жыл бұрын

Hi guys. I just bought my klean kanteen cap2.0 mug from paddy pallin in Western Australia. It works all well but its not leak proof. It leaks out. Whats wrong?

@LuwieMangubat 8 ай бұрын

Mine cannot remove.. doesn't loosen

@KleanKanteenOfficial 8 ай бұрын

We are sorry to hear you are experiencing this issue with your Klean Kanteen product. Please email our warranty department at warranty@kleankanteen.com for more information and further assistance. Thank you!

@CO-kd6sd 2 жыл бұрын

I'm in the market for a bottle for my coffee and wanted to check out this cap. This has to be disassembled into 5 pieces to clean? That's ridiculous. Really wanted to go with you guys but now it's between Hydroflask and Yeti. I'll buy Klean Kanteen if you come out with something that's around two pieces and bonus if there's a bright color to show when it's open or closed like on HF.

@sandratheprocraftinator945 Жыл бұрын

I remember I watched this to clean it and now I need to put it back together 😱but I think I’m missing two pieces 🤦🏻‍♀️

@KleanKanteenOfficial Жыл бұрын

I'm sorry to hear you're missing two pieces for your cap. Please reach out to our Customer Service at warranty@kleankanteen.com and they can send you replacement parts for your cap.

@sandratheprocraftinator945 Жыл бұрын

@@KleanKanteenOfficial ok thank you so much, I really liked how cold it kept the drink nice & cold. I’ll double check before I reach out to them.

@OrangeJews1138 2 жыл бұрын

really sucks that all of KK's washing instructions are only available as videos, terrible stuff in terms of accessibility (for multiple reasons)

@911S 6 жыл бұрын

He flipped it instead of turning it upside down because you could not tell if it was leaking slight. But i bet if he held it upside down it leaks.

@AlexAyoub_ 5 жыл бұрын

If you screw the cap on or off while keeping the mouth open, this should solve the problem of any leaks.

@annadaae26 6 ай бұрын

I hate this cup so much. I have many cups that have lids that are one piece, do not leak, do not smell...do not have to disassemble and put together a puzzle every time I have to clean it.

@juliawilliams8061 3 жыл бұрын

It’s a pain in the arsss to put it together

@user-cq2wv1jw2j 3 жыл бұрын

あんな逆さまにしたらこぼれる！わたしのだけなのか？

@kiyosugiyama 2 жыл бұрын

メーカーとのやり取り説明でやっと外せました。ビデオとは勝手が違い、誤解します。洗浄の外し方に、今回の事例を元に改善を望みます。動画をご覧になっているかと存じますが、出っ張り部分は引っ張るものではなく、飲み口のほうに押し出す形になります。

@picnicsinspace198 13 күн бұрын

8yrs old this video is and I have NEVER had or seen a dishwasher with a "Top Rack" like that. Also these lids are just NASTY! poor design when it comes to cleaning.

@vermillionss 4 жыл бұрын

I hate the design of this thing. So complicated and the pieces do not come apart as easily as in this video.

@helenanilsson5666 6 жыл бұрын

This is why I prefer simpler insulated bottles, where you unscrew them entirely to pour the beverage into a cup or the cap of the bottle. Sippy bottles is a complete pain to maintain with no real benefits.

@AncapistanVan 5 жыл бұрын

Huge benefit for a delivery driver with one hand on the wheel and one hand to drink water with..