Klein Screw Holding Screwdrivers STOP Dropping those Screws!

Рет қаралды 3,885

10 ай бұрын

Just picked up what I think are the New Klein Screw Holding Screwdrivers. Screwdriver
I share in this video the cost, features, and how it is slightly different than the other option I have shown for this task. Hope to help you make the decision if this is a tool you need to add in your life. It might be just right for you... or maybe not for you all together.
Hope it was useful & THANKS FOR WATCHING!
The following are links to products shown in the video. Links marked (Affiliate Link) are Amazon Affiliate Links for Items in the video. I participate in the Amazon Associates Program and make a small commission if you purchase using this link at no cost to you. Thank you for your Support!
If you would like a link for something else you see in the video... let me know and I will post it here as well.
Klein 2- Piece Set 85153K (Affiliate Link) - amzn.to/48ytj4n
Klein Newer 5/16 6026K (Affiliate Link) - amzn.to/48ygiYC
Other Items In Video:
Klein Older Red Version (Affiliate Link) - amzn.to/3LCIa3V
NoDrop Tools (Affiliate Link) - amzn.to/46qh1ZJ
WERA Grippers (Affiliate Link) - amzn.to/3ZEurPS
Quick-Wedge (Affiliate Link) - amzn.to/3ZzlQO5
Video for NoDrop Tools - • No Drop Tools / Screw ...
Video for Wera Grippers - • WERA Insulated Screw G...
#klein #screwdriver #electrical #hvac #maintenance #kleintools #wera #nodrop #nodroptoolsllc

Пікірлер: 46

@Doc1985 10 ай бұрын

You do a great job with your videos--as usual! Keep up the great work! Thank you!

@MORGANSMaintenance 10 ай бұрын

Thank you… you always do a great job commenting, you keep up the good work too 😂 👍👍

@mozzberg590 10 ай бұрын

I've never needed one of these, but I get it. I was taught to put electrical tape over the flat blade and it makes a wedge to insert a screw.

@MORGANSMaintenance 10 ай бұрын

I’ve rarely needed one in Electrical which is what a lot of them are geared for… I’ve used them in plumbing more often than anything it seems like. Sometimes weird shower valves have a lot of screws to get out to access cartridges or seats.

@michaelthompson7570 10 ай бұрын

i have a similar driver ,purchased in early 1970s, with green acetate handle,,from time to time it floats to the top of my tools,,,thanks for this revue,,,something I definately will get,,luv your vids

@MORGANSMaintenance 10 ай бұрын

Yeah those Red Kleins are actually labeled Vaco… so those have probably been around a bit too. Appreciate you watching 👍

@papaz6047 10 ай бұрын

I appreciate the time that you put into these videos

@MORGANSMaintenance 10 ай бұрын

Thank you 👍👍

@gnic76 10 ай бұрын

I wasn't even aware something like that existed, I've seen other types that clamp to the outside of the screw. Another thing to add to my tool list. Ummm Thanks!?🙂

@MORGANSMaintenance 10 ай бұрын

I’m just here to help you spend your money 😂. It’s what I do. 👍👍

@three-phase562 10 ай бұрын

The concept has been out for a long time but it is good to see Klein releasing a version with their rubber coated handles. Thanks for the review.

@MORGANSMaintenance 10 ай бұрын

👍👍

@jasonfoster9118 6 ай бұрын

These are awesome when replacing motor starters in MCC buckets. I'd never used one until yesterday but I immediately ordered them after I did. We have to slim line Square D buckets and they are a PIA to reach down in to restart the screws.

@MORGANSMaintenance 6 ай бұрын

👍👍… right tool for the job makes for a less stressful day.

@leonpowers8762 10 ай бұрын

I have the ones with the acetate handles and I really like them. They have come in so handy. I like the new ones. I will now have to get the rubber handle one

@MORGANSMaintenance 10 ай бұрын

👍. They aren’t something you use everyday… but when you don’t have to magnet fishing for a screw, they are worth having.

@Aepek 10 ай бұрын

0:24 @morgn’s maintenance this newer style was released around sept 1st believe, and Klein does have the older style handles still for sale on diff sites (unless old stock, they have reddish resign type handles); this newer “ more modern” looking style is the newest version and know came out I sept, maybe even last week Aug (maybe for some). But now that most ppl see them, sites are listed as back ordered and also think this because still fairly new released item, and might also be the Klein/Lowes new partnership perhaps 🤔. Would say sad to see Klein go from depot, it my depot rarely had any Klein item in stock and what they did have over the years, was sad. Thx for this vid, enjoyed! Cheers👍🏻👍🏻

@MORGANSMaintenance 10 ай бұрын

Yeah I would have preferred they stayed at Depo… I have a Lowes and Home Depot close, but I rarely go to Lowes. 👍👍 Thanks for the info

@emarr3720 10 ай бұрын

Gotta hand it to Klein. They innovate!! They gave some creative thinkers over there. I have a lot of their designs simple for that reason. They are with my general tools & emergency bags while the Knipex & Wiha are with my electrical stuff. Klein was late to the party with insulated tools. It’s curious since they’ve always serviced the electric trade.

@MORGANSMaintenance 10 ай бұрын

I have moved to almost 100% Knipex on Pliers/Cutters but my Kleins have become my at home tools/spares. I still get their screwdrivers from time to time though, especially their multi-bits.

@emarr3720 10 ай бұрын

@@MORGANSMaintenance we are of like mind!! When it comes creative engineering. mind & execution, I m very fond of the Germans. I marvel at the thought & engineering chops that produced things like the Knipex Multicrimp. the Precistrip, the Knipex precision insulation stripper (12 12 13)!! They all work flawlessly. I just pulled the trigger in the knipex 43465 set despite the price. Wiha is ok. Other than their torque screwdriver I don’t buy their stuff bc most is not made in Germany anymore. Guys the Germans are going away. They based their entire industrial model on cheap Russian natural gas & that’s gone. Get the greatest tools on earth before you can’t!!

@MORGANSMaintenance 10 ай бұрын

@@emarr3720 👍

@ks-hg5vo 9 ай бұрын

Believe they are made by quick wedge . They originally had green acetate handles then went over to red acetate. It appears klien making under licence as the mechanism is identical . My green ones I've had nearly 25 years

@Stefan_Kawalec 10 ай бұрын

Interesting and useful feature. Fortunately here we hardly any use slotted screws nowadays. Some older (from 70s and 80s) electrical panels do have slotted screws. If I encounter them, whenever I can I just change the screws to PH or PZ. If one never used slotted on Philips, they have a lot to learn :) Your collection of screwdrivers must resemble those celebrities' shoes collections.

@MORGANSMaintenance 10 ай бұрын

I’m the same with slotted. I never put them back unless I have to… I keep wondering when I will see the last one 😂 It is up there… I do give some away to people I work around from time to time, but I do have a lot.

@2dividedby3equals666 10 ай бұрын

Quick wedge has manufactured this style for quite a while now. I believe they operate out of Utah, check them out.

@MORGANSMaintenance 10 ай бұрын

I have looked at it, I may try it just to see what it’s about… I think they have one with a longer shaft.

@nobodyhome8148 10 ай бұрын

I had split wedge screwdrivers 50 years ago 🤣

@MORGANSMaintenance 10 ай бұрын

Yeah I think those Red handle Klein ones have been around awhile… they actually have VACO on the handle. You were ahead of the times 😂👍

@dalecarver7415 9 ай бұрын

Hey, I have most of the Klein screwdrivers, their multi bit/socket drivers, but I always end up using a Snap-On ratcheting screwdriver. I bought this hung 40 years ago and it works as well now as it did then. It has a magnetic tip, and I can switch the ratchet with my hand while using it. I installed a ceiling fan this weekend and after trying to use the new stuff, I ended up grabbing that out of my bag. Not a big Snap-On fan but I like that screwdriver!

@MORGANSMaintenance 9 ай бұрын

I’ve never really gotten into Snap-On tools just mostly because they haven’t been readily available to me (before the internet) which makes me not think of them. I have seen those on Last Best Tool though and I know he really likes them too. I may have to get and try my first Snap-On tool one day. Appreciate the suggestion 👍

@dalecarver7415 9 ай бұрын

Their stuff tends to be way overpriced. In fact, I think they get over $70 for one of those these days. That’s hardly worth the price.

@MORGANSMaintenance 9 ай бұрын

@@dalecarver7415 yeah, I see their compare prices at Harbor Freight a lot… their tools are up there. But if they work, and for that long… I guess it’s not to bad. I like trying stuff too much to pay for that much longevity 😂

@koaasst Ай бұрын

found a snapon philips type. seems it was patented in 1960

@MORGANSMaintenance Ай бұрын

I hadn’t seen it before. There aren’t a lot of Phillips type out there that I’ve noticed.

@Aepek 10 ай бұрын

3:38 👍🏻

@MORGANSMaintenance 10 ай бұрын

It’s drives me crazy when that’s not an image a website gives you.

@Aepek 10 ай бұрын

Acetate thx for that 0:34 could not think of word for life of me, but been long day in Florida heat in the wonderful world of Trade Work……bah bah bummmmm 🤦🏼 heat stroke me thinks, sorry

@MORGANSMaintenance 10 ай бұрын

👍… I feel for you, I always think summers are bad here, but I won’t go near Florida in the summer