Klipper And M600 Color Change Macro

Рет қаралды 42,842

Күн бұрын

It's been a while since I did a tutorial, and since I am learning my way through Klipper, I figured I'd start that back to basics noob process of sharing everything I learn and hopefully help someone else in the process :)
Github for Klipper Macros is available here: github.com/Klipper3d/klipper/...
BIQU Hurakan here: biqu.equipment/products/biqu-...
Prusa MK3S+ here: geni.us/PrusaMk3
LDO Motors Voron Kit: geni.us/MHLDOVoron
Should you wish to support me, you can do so via:
Patreon: / 3dmakernoob
paypal: www.paypal.me/jcasha
Want to send me something? go ahead (Normal mail as courier packages get returned):
Attn: Joseph Casha
P.O. Box 12
Constitution Street,
Mosta, MST 9059
Malta
Europe
-----------
✌✌Affiliate Links ✌✌
Matterhackers: geni.us/MH3DMN
Amazon International: geni.us/3DMNoob
Gearbest: geni.us/3DMNGB
Banggood: geni.us/3DMNBG
Aliexpress: geni.us/3DMNAE
Recording Equipment:
Main Camera: Panasonic Lumix G7: geni.us/LumixG7
(B-Roll) Canon EOS760D: geni.us/CanonEOS
Canon EF 10-18mm: geni.us/CanonEF1018
Canon Lens: geni.us/Canon2470
ElGato Stream Deck: geni.us/Streamdeck
Elgato HD60S Capture Card: geni.us/elgatohd60
Timelapse - GoPro Hero 5: geni.us/GoProH5
Microphone, Rode Filmmaker Kit: geni.us/RodeFMkit
Light Boxes: geni.us/StudioLights
High Speed SD Card: geni.us/SandiskSD

Пікірлер: 75

@3DMakerNoob Жыл бұрын

Intro: 00:00 BIQU Hurakan 00:25 Klipper Overview 00:42 M600 Function 01:10 Klipper Macros 02:25 Instructions 02:47 Testing Colour Change 03:40

@LuckyPrinter Жыл бұрын

I have my dived in to this for about a year now, and I still somewhat a newbee on this. So more of this kind of info video are very welcome👍

@3DMakerNoob Жыл бұрын

Will definitely be many more, there is lots to learn hehe 😁

@micahlanghammer3022 Жыл бұрын

dude you HAVE to make a video about your timelapse setup. the videos are absolutely gorgeous

@N3verGiveUp Жыл бұрын

Thanks for sharing! I LOVE your honesty on the video, VERY refreshing! Keep it up.

@thorodinson1277 Ай бұрын

Geez, I cant thank you enough, ive been going crazy trying to figure out how to print in more colors than one!!!

@thefrenchican23 9 ай бұрын

I wanted to say thank you again very much! This worked awesomely for my new Elegoo Neptune 4 Pro!

@neilAneerGAmAI 5 ай бұрын

Thanks for making the video, worked like a charm. Happy Printing!

@thefrenchican23 9 ай бұрын

Thank you so much for this video! I just got my new Elegoo Neptune 4 pro, and look forward to adding this to my cfg file!

@DarrenGerbrandt Жыл бұрын

Thanks for the video, gave me the push to finally add this to my macros. Not that it was hard to do, just kept putting it off.

@3DMakerNoob Жыл бұрын

hehe, glad i served a purpose at least hehe

@joslynjordan3818 Жыл бұрын

Great video. What's interesting to me is that my first printer was a Zortrax m200 6-7 years ago and this feature was already in their proprietary software then. I've been doing prints with 5 or 6 color changes with ease for years. I'm surprised it's taken this long for other slicers to add it.

@alejandroperez5368 Жыл бұрын

Emm... nobody said this was new. You could do this on Marlin for more than 5 years now...

@joslynjordan3818 Жыл бұрын

@@alejandroperez5368Emmm.... I didn't say it was new either. I was also speaking about the slicer software and not the firmware. To be able to do it in the GUI in a few clicks like he was demonstrating.

@avejst Жыл бұрын

Interesting as always 👌 Thanks for sharing your expirence with all of us 👍 😀

@3DMakerNoob Жыл бұрын

My pleasure 😊

@VincentGroenewold Жыл бұрын

Ah, nice to have a break in the shorts (which are awesome btw!). :) Nice heads-up that I don't see explained often.

@3DMakerNoob Жыл бұрын

The idea is to have 4 shorts and 1 long every week at some point when I start ramping up :)

@RocKzDG Жыл бұрын

Oh hey you're the person from my reels recommendations with the fancy 2.4 build! Funny I find your video when looking into this topic

@3DMakerNoob Жыл бұрын

Haha yup, build is almost complete. Just finishing up the last touches 😁

@RocKzDG Жыл бұрын

@@3DMakerNoob Looking good, nice video also thank you for sharing :D

@bybarbaros 7 ай бұрын

harika çok işime yarayacak... verdiğiniz değerli bilgiler için teşekkürler.

@TC-xu7pp 6 ай бұрын

Amazing worked like a charm!!!!!!!

@isaaceliape Жыл бұрын

That's so cool, thanks a lot for sharing that!! =D

@robertarmstrong6537 Жыл бұрын

I am very new to Klipper. I did a test print with the M600 and it seemed to work. I am now trying it on the project I dove into all of this for, but I have a question. There was a 1 hour timeout timer, if I am not in front of my printer when it times out, the print would be cancelled. Any advice on how to extend the timer or such? Thank you for your time.

@bobhepple5752 Жыл бұрын

Love the video I'm new to clipper but just on looks it seems a bit like the E3D Tool changer Duet RepRap a bit intimidating which is where im at with my toolchanger.. 5Keep up the good work good to see you on you tube again

@3DMakerNoob Жыл бұрын

Yep, very much similar to duet in the way it’s configured :) and thank you :)

@KuBaVrT 7 ай бұрын

thanks so much man! it helped a lot!

@Mett-wt3xj Жыл бұрын

Great tutorial

@theamzngq 8 ай бұрын

Question (in case you know): I added the M600 macro you linked to and it seems to work well. However, my BTT filament runout sensor now triggers all the time; I have to disable it for prints to resume normally. Any ideas?

@TheExtremeElementz Жыл бұрын

What camera are you using that is giving you a live feed into Klipper? Seems very clear.

@Mett-wt3xj Жыл бұрын

More on macros would be great. Ty

@3DMakerNoob Жыл бұрын

Noted 😊

@Michaelhood0 7 ай бұрын

I'm looking for help. I would like to be able to change the filament manually. I don't have a runout sensor and I have spools that won't finish some jobs and I have a new spool also rather than start with the fresh spool I want to run it down than do a filament change when I want. If I use the puase it will park the print head immediately and than I can change the filament and than when I resume it will start on the very next layer because puase will stop on its current layer so when I resume what ever part of the layer that wasn't finished will have a layer missing. I need a solution

@StefanoMerinoDeRui Жыл бұрын

in my case it stoped the motors and heaters, so i couldn´t restore the print, any ideas?

@marioperez2443 3 ай бұрын

I always want to make a seismic bed to test arquitectural models. And wanna use my printer without the bridge to do it. I'm sure that is just a simple g code to move it but i don't know how.

@cardasiano666 6 ай бұрын

fantastic! Thanks!

@walksonpoo Жыл бұрын

What camera did you get to work with Mainsail?? Ive yet been able to get any of mine to work.

@joma-iu4gd 6 ай бұрын

Nice Video, I bookmarked it and saved it, liked it. Will this work with my Litter Anycubic Kobra with Klipper Firmware on it?

@3DMakerNoob 6 ай бұрын

It should 😊

@frandysanchez4737 Жыл бұрын

Thank you so much!!

@ruuman4 5 ай бұрын

What STL are you using for the test print?

@narutogamer 8 ай бұрын

try to install a cleaning noozle brush and a macro to wash before each print

@Beakerzor 6 ай бұрын

THANK YOU!!!

@adrianleano6685 Жыл бұрын

How long will it wait for you to change?

@thorgraum1462 Жыл бұрын

what if my printer does not have buttons? can i resume from the webinterface?

@F1v30h1 4 ай бұрын

Yes

@Bodyman4life 3 ай бұрын

hello am a newbie...can anyone tell me why I cant paste

@gofreboy Жыл бұрын

Thanks for the instruction. I am not able to get it to work, it shows me this message and I don't know why: "gcode command M600 already registered Once the underlying issue is corrected, use the "RESTART" command to reload the config and restart the host software. Printer is halted"

@auntiegymshoe 11 ай бұрын

Having the same issue. Did you find a fix?

@gofreboy 11 ай бұрын

@@auntiegymshoe Yes, the M600 code is declared in a "hidden" file. The easiest way without having to search and modify it is to add the macro M600 to the printer.cfg and inside it and at the beginning add: "rename_existing: (the name you want without the parentheses, for example M600.1)". For example, as I have the macro and the previous line is: [gcode_macro M600] rename_existing: M600.1 gcode: {% set X = params.X|default(50)|float %} {% set Y = params.Y|default(0)|float %} {% set Z = params.Z|default(10)|float %} SAVE_GCODE_STATE NAME=M600_state PAUSE G91 G1 E-.8 F2700 G1 Z{Z} G90 G1 X{X} Y{Y} F3000 G91 G1 E-50 F1000 RESTORE_GCODE_STATE NAME=M600_state

@svenak1430 Жыл бұрын

super!

@KH-mn3si 4 ай бұрын

Ehrenmann

@markusp.5334 8 ай бұрын

Joe ... Are you ok?

@TheSuperDuperLS 8 ай бұрын

Mentally or physically?

@priyan776 Жыл бұрын

Great video. Use the same macro, but if I don't change the filament for a long time (About 2-3hrs) after I change it, it asks me to home the printer. I can't home it, because I have safe homing enabled. Does anyone else face the same issue?

@3DMakerNoob Жыл бұрын

I’ll try that out and see if it happens to me too, always good to know

@priyan776 Жыл бұрын

@@3DMakerNoob please let me know how did it go?

@cdsmakestuff Жыл бұрын

it asks you to do a "home" because you're waiting too long... klipper has built in safety features that after a certain amount of time of inactivity, it will power down the motors, turn off the hotend and bed... once this happens the printer has no idea where the tool head is and as such, can't resume. I believe there's a way to increase the "timeout" length but wouldn't recommend it... 2-3 hrs seems an overly long time to sit between a filament change anyway.

@priyan776 Жыл бұрын

@cdsmakestuff awesome, I didn't know that. I'll look into it. I print overnight, and I use the same M600 for filament run-out sensor as well. When I was using Marlin, it waited for me as long as power was on. I was expecting the same... lol. But nozzle cools down, only the bed and the motors stay on.

@edwardnewbold Жыл бұрын

Looks like a super-Ender 3.

@corlissmedia2.0 Жыл бұрын

I feel like I must warn you about your Hurakan. If you take off the gantry, and remove the bottom plate, and look at what's connected to the FG post of that printer, you will see TWO GROUND WIRES going to that post. One comes from the cross member of the frame (between the power supply and the control board), and the other ground comes from the switch/power supply coming into the printer. From everything I've read, and from the horrible experience I've had with my Hurakan, there is a real possibility of a horrible electrical event happening because there are two ground wires on that post. Please check your printer, and please comment. thank you.

@shawnr8164 Жыл бұрын

As long as they are both ac ground lines that's fine, it wouldn't be up to code without it most places, actually it's good to have multiple grounding points. They are both going to the same ground connection at the power inlet anyway.

@corlissmedia2.0 Жыл бұрын

@@shawnr8164 one ground is from the power inlet, the other is from the frame. from the factory, they're both open-spade connections. when you do resonance testing, the vibration _can_ shake at least one of those two connectors out it's capture. that's what happened to me. the loose from was from the power inlet. when the wiring I had do to put a better hot end on the printer, all heck broke loose. I lost the complete wiring harness to the board, the board itself, three of the four stepper drivers, the hdmi port, and the " BIQU monitor I had plugged into the printer. I replaced the open spade connectors with ring connectors, which can't be vibrated off the FG post. Only cost me three months and $300 for all the parts I had to replace.

@Ernesta1 8 ай бұрын

Hi guys, where did he go, he hasn't been there for 10 months 😕

@3DMakerNoob 8 ай бұрын

Taking a bit of a mental break. Will soon be back :)

@XKATOMI1 Жыл бұрын

@3DMakerNoob Жыл бұрын

Hey 👋

@melone6267 Жыл бұрын

Are you from Germany or can you speak german

@alejandroperez5368 Жыл бұрын

The learning curve from Marlin to Klipper is quite steep, honestly.

@rcmaniac25 Жыл бұрын

I'm just here to roast you in the comments :P

@3DMakerNoob Жыл бұрын

haha, go for it :)

@rcmaniac25 Жыл бұрын

@@3DMakerNoob that was the whole thing :P

@eugenioandreola2401 Жыл бұрын

Hi, I attempted to copy your [gcode_macro START_PRINT], but when a new print starts, Klipper returns an error message: "Error evaluating 'gcode_macro START_PRINT:gcode': jinja2.exceptions.UndefinedError: 'NOZZLE' is undefined."

@eugenioandreola2401 Жыл бұрын

Resolved, there were some typing errors! Hehehe.