Рет қаралды 260,861
Very annoying: transverse cracks in the drywall due to errors in the substructure or poor panel connections! When removing the filler and the paint from our wall, the foreman Adi noticed a mistake: Missing chamfering of the transverse joint. Fortunately, this error can be remedied with a few simple steps. In this video, our demonstration master Adi shows you how to do it step by step.
Such cracks are unsightly and actually not necessary, since they would not appear with the right construction. In our example, the wrong profiles were processed in the door area. As a result, the wall is not stable enough and vibrates a little due to loads. A millimeter is enough to create a crack. So that these mistakes do not happen in the construction of your drywall, we have put together a few videos here
If you want to know how to properly build a drywall substructure, just watch this video:
Build drywall - Part 2: Build the substructure of the stud wall - • Unterkonstruktion eine...
As seen in this video, mistakes can also happen when planking the drywall. Click here for our video about the correct planking with plasterboard:
Building drywall - Part 3: planking with plasterboard: • Beplanken mit Gipsplat...
The correct execution of the filling & finishing of drywall is also very important. Here you can find our extensive video with Adi:
Building drywall - Part 4: Filling and grouting the wall (finish): • Verspachteln und Verfu...
Here is the content of this video:
00:00 Greeting
00:12 Repair of cracks in the door area due to errors in the substructure
01:14 Apply V-joints to unchamfered transverse joints
03:45 Filling the chamfered transverse joints
05:35 Inserting glass fleece into the second layer of filler
07:10 Remove the burr from the second layer and pull on the last layer (finish)
08:49 Blending the transition to color
We processed these Knauf products for the ceiling connection of the drywall:
Knauf Royal joint filler
Knauf glass fiber joint tape
Here are the tools you should have ready for this DIY project:
Cutter “Carpet Knife”
Small eaves
Small spatula
hand grinder
spatula bucket
If you have any questions or concerns about erecting a drywall or need technical advice on planning and construction, processing and application, simply contact our customer service:
Tel.: 050 567 567 (Mon-Thurs 7.30 a.m. - 4.30 p.m., Fri 7.30 a.m. - 1.30 p.m.)
Email: service@knauf.at
About the "How To Drywall" series:
Tarkan, Adi and Michael are our Knauf demonstration masters. Her job is to support construction professionals with their drywall projects every day. For this season we have decided to collect the most important information, tips & tricks on the subject of drywall, in particular a stud wall with door and corner, for you. It doesn't matter whether you want to build a partition yourself or just a room divider - here you can learn first-hand from professional craftsmen how it's done. Knauf metal stud walls are an equivalent alternative to "light", solid interior walls for interior construction. Due to the dry and quick installation as well as the slim wall cross-sections, with the best thermal, sound and fire protection properties, partition walls made of plasterboard are particularly versatile. They are stable and provide the necessary peace and comfort in your own four walls.
You might also be interested in these "How to drywall" videos:
- Transport plasterboard: How to do it right - • Gipsplatten transporti...
- Building Drywall - Part 1: Planning, Preparation & Tools: • Planung einer Trockenb...
#Drywall #Instructions #DIY #SoGehtTrockenbau