KnifeCenter FAQ

Рет қаралды 59,495

Күн бұрын

If you think you’re “no good at sharpening,” we’re here to prove you wrong. Plus, we cover the essentials of gentleman’s knives, modern slipjoints, and whether MagnaCut means the end of all other blade steels.
Check out our earlier video on the Spyderco Sharpmaker: • How to Sharpen Your Kn...
More from our Sharpening Playlist: • Learn To Sharpen
Featured Knives
Chris Reeve Sebenza: kcoti.com/3VOHFXA
Tactile Knife Rockwall: kcoti.com/3W4UIDT
MKM Flame: kcoti.com/3FBFocp
Michael Zieba MS3: kcoti.com/3HoEt09
Benchmade 533 Mini Bugout: kcoti.com/3Pgmj2L
GiantMouse ACE Riv: kcoti.com/3uFPEKC
Viper Lille: kcoti.com/3PeGlus
Spyderco Sharpmaker: kcoti.com/3h7qL7u
Work Sharp Precision Adjust: kcoti.com/3FjJy7o
LionSteel Gitano: kcoti.com/3haFjDk
LionSteel bestMAN: kcoti.com/3HoCRDV
Viper Hug: kcoti.com/3h7OZOZ
Shun Kanso Santoku: kcoti.com/3FdDPA4
Leatherman FREE P4: kcoti.com/3hjziEm
McNees MAC2: kcoti.com/3VQdnUh
MagnaCut Steel: kcoti.com/3Fo8rPd
APOC Wayward Camper: kcoti.com/3uEHoKR
Demko FREEREIGN: kcoti.com/3uJeuJu
0:00 Intro
1:00 Gentleman’s Knife Under 3 Inches
11:50 The Easiest Way to Sharpen
17:03 Modern Slipjoints Under $150
22:16 A Special Santoku
24:40 A Leatherman for Mechanics
26:10 MagnaCut - A Steel to End All Steels?
27:15 Centering Your Fixed Blade
Slightly Larger that Average Patches: kcoti.com/3IXcovQ
Need a Tek-Lok? Get them here: kcoti.com/2MaMxqJ
#KniFAQ #KnifeCenter
Links:
/ knifecenter
/ knifecenter
/ knifecenter
Sign up for our newsletter:
kcoti.com/2LkuXg7
Check out our KnifeREWARDS program for free money to spend on your next knife: kcoti.com/knifeREWARDS
Browse our full catalog:
kcoti.com/KnifeCenter

Пікірлер: 277

@kevintownsend8476 Жыл бұрын

I have NO ability to hold a knife freehand at any angle. In my 65 years on this planet I collected a drawer full of knife sharpeners that never did the job for me. I finally found the Worksharp Precision Knife Sharpener. I bought the extra set of sharpening stones and now I can sharpen anything with precision.

@Enes-wj5xq Жыл бұрын

I sharpen my kitchen knives with the bottom of my ceramic dishes, works really well.

@buffewo6386 Жыл бұрын

Growing up, I could sharpen just about anything freehand on a stone. It was a relaxing thing for me. I once had a surgeon (relative of mine) comment that my pocket knife was sharper than his scalpel once. Now, I worry about ruining a knife if I tried. Agree on the Workshop. Got the full set, and I love it. Includes a strop so you can polish to your hearts content.

@jdisdetermined Жыл бұрын

Freehand is weird.. like juggling.. it feels just totally impossible.. until it doesn’t. It’s not like a gradual thing. All of a sudden it clicks and you know what holding your angle feels like. From there you have it, just work on burr minimization and removal and getting from razor sharp to scary hair splitting sharp. Using two hands and large bench stones in a base or clamp really helps. I struggled with one handed small stones, but once I went to bench stones things fell into place quickly. It’s worth the time and frustration to learn, very fun and rewarding having that skill.

@tomhayes5703 Жыл бұрын

@@buffewo6386 Lpll

@frankysour Жыл бұрын

@@Enes-wj5xq first time I was able to get a hair shaving edge was on the back of a coffee mug... Admittedly, I did not have much other "good" sharpeners at that time, but... Interesting thing is that I got so excited that I shaved pretty much completely my left arm, just because... It was working! At first glance wife thought I had some kind of physical condition, and at second (probably the right interpretation...) That I had some strange MENTAL condition, but still it was plenty worth it, and a lot of fun.

@nonnobissolum Жыл бұрын

Got my Worksharp Precision Adjust device from you guys. Love. It. Absolutely idiot proof, fabulously sharp edges, and still pretty relaxing to use. Highly recommend.

@jorgefernandez6407 Жыл бұрын

Thoroughly enjoyed this series. It's excellent!!!

@jimbob5376 Жыл бұрын

Gotta second the recommendation for the MKM Flame Light (yep, DCA is showing a Flame Light, not a Flame), a fantastic gentleman's knife. I also have it in the olivewood handles - the fit, finish, and action are great and the blade came extremely sharp with no fine-tuning needed.

@Gelattoh Жыл бұрын

Thanks guys for answering my question! I'm so stoked I showed my family 😂🤜🤛

@realbroggo Жыл бұрын

My go-to brand for gents & gift knives is Finch. Great range of styles and colours - most are 3 inch or smaller. Good materials and build quality. Really good for 'non-knife' people as their designs are more traditional than tactical and the colour options improve their appeal. All of my gents/suit/office blades are Finch - I have five that I rotate. Final benefit is that they aren't too expensive. You will find something you like for between US$100 to US$150. Sharp blades all.

@billprindle1613 Жыл бұрын

I ponied up for a Wicked Edge sharpener and it is far and away the best I’ve ever used to get a fearsomely sharp edge at the precise angle required by the blade. It’s expensive but if you have good knives, it’s worth it. My back up is the Spyderco Sharpmaker.

@andrewnaessig2516 Жыл бұрын

Thanks for dedicating some time to my question. You guys are the best!

@Gelattoh Жыл бұрын

They answered mine too! Amazing!

@tmutant Жыл бұрын

When I visit DC (at least once a year) I carry a Kershaw Shuffle. Carry a pink or Zombie green one and no one finds it threatening. Swiss Army Cadet is also a good choice. Nobody finds them threatening. I got an MKM Fox Isonzo from Knife Center (blatant plug) and they are about perfect for DC carry, especially the blue ones.

@derekneumann Жыл бұрын

A KC exclusive Olive Drab Alox Victorinox Huntsman in Magnacut sounds like a great idea guys!!!

@frankysour Жыл бұрын

Greetings from Milan! It's nice to see so much Italy featured in your videos, makes me somewhat feel good... On the flip side, if I want an MKM or a Lionsteel here I am pretty much assured to pay it more (sometimes substantially more....) than you and your customers do in the U.S. ......... Strange world!!

@WaynesSharpWorld Жыл бұрын

Those MKM Flames are VERY tempting!! 🔥🔥

@cliffhouser9138 2 ай бұрын

David, you gift great gifts!!!

@dolguldur4706 Жыл бұрын

DCA and Thomas is a legend 🤘🏻

@cliffhouser9138 Жыл бұрын

Wow David, you give some great gifts!!! I would love a Sebenza with wood inlays for Christmas!!!

@arrowheadguys7637 Жыл бұрын

I gave my best friend a Mini-Osborne when he moved to the VA side of DC last year, along with the sub-3" blade I figured the quirky looks added to the non-threatening vibe, despite it being Thomas's favorite blade shape: reverse tanto! Here in Missouri tho, my current gentleman's knife is a Spartan Harsey Plague Doctor since out only knife law is you can't conceal a blade longer than 4"

@technophile419 Жыл бұрын

I'm blessed, down here in Tennessee, we could carry a sword in our pocket if it fit lol. Of course, we can edc one if we want either way lol.

@michaelpitts3285 Жыл бұрын

Me too down in Arkansas. The only way a knife is a weapon/ illegal is if you use it in a crime.

@technophile419 Жыл бұрын

@@michaelpitts3285 good to hear! That's true freedom. On a side note, the Arkansas Toothpick is a helluva knife! 🤘🏻

@arrowheadguys7637 Жыл бұрын

@@technophile419 I pretty much carry whatever I want wherever I go. I've never once been asked if I'm carrying a pocket knife when I get pulled over. Knife laws are generally dumb and I hope all states eventually get rid of them, especially in an era when many states have constitutional carry allowing people to conceal a 9mm with 21 rounds in the mag.

@arrowheadguys7637 Жыл бұрын

@@michaelpitts3285 Midwest for the win.

@aries8995 Жыл бұрын

I just got a GREAT edc if you are looking for a 3" by Kobalt it is a little heavier but that is because it's so well made. It's truly impressive when compared to any other at any $ range.

@davem6735 Жыл бұрын

Kershaw Onion is a great gentlemen's knife. I've been carrying one for years.

@cab927 Жыл бұрын

Thanks for answering my question on the show even though you responded to the comment that's why this channel is great interaction in videos and in comment section that's preem.

@iamgroot4080 Жыл бұрын

For years I was looking for that special, perfect folder... And now I can say that I found it in the form of a 4" fix blade N690 with micarta handle. I'm done! Thank You KC team!

@GBall_Vision Жыл бұрын

Iamgroot

@tracerxrider Жыл бұрын

What is it?

@dennishurley1992 Жыл бұрын

The LegalBlade app by Knife Rights is a handy way to keep within the law when you travel. Knife Rights is also a worthy non-profit for donations by knife lovers. They just got automatic knives approved in my home state of Pennsylvania.

@andrewnaessig2516 Жыл бұрын

Thanks for bringing this app to my attention. I’m in SC at the moment but lived in south central PA for 32 years. Miss my mountains.

@papik1965 Жыл бұрын

Hey thanks for review guys, always a pleasure. My question is regarding sharpeners and if you could talk about the HORL diamond standard sharpener and what you think of them? Thanks

@StuffSharpEnough Жыл бұрын

Excellent save with the Leatherman, DCA! 😄

@Kra76fiend Жыл бұрын

Greetings DCA et al. Long time listener, first time caller. I have a question about sheaths. My Knifecenter exclusive Nessmi Pro, unlike my first Nessmi, comes with a kydex sheath. The retention is non existent and the question is, aside from an alternative sheath, is there a way to improve retention on a rigid sheath? Thank you and best wishes, the channel has brought my lady and I closer in our shared appreciation of knives. Somehow, 2 years of Knifecenter videos have brought her up to speed with my lifelong passion.

@IvIidnight Жыл бұрын

The CJRB Silax would work well for the 5-5.5" santoku knife. And it has a sheath in case she wants to take it somewhere.

@brianensminger6166 Жыл бұрын

Several years ago I purchased three tops knives . They were the Hawkes hellions . I know they are hard to find now and was curious to know if they have gone up in value ? Also , any knives come to mind which have appreciated in value over the years ? Thanks and keep up the great work !

@tonydiebold4899 Жыл бұрын

I’d suggest that new exclusive Kwaiken Air you dropped a couple of days ago for the Gentlemen’s knife… just grind off that .07” to get it to that 3” max length.

@travishill78 Жыл бұрын

Hi DCA and team! Not the most exciting knife question, but… pocket clips! Are there pocket clips built better then others? Love me a good pocket knife but I bend so many clips just by getting snagged on things throughout the day. Do you have any recommendations on pocket knifes that might have a more durable clip option? Thank you for all the great vids!

@paulthelefty Жыл бұрын

WOW! Nice catch DCA! 👀

@mattconklin4026 Жыл бұрын

Do you have any videos on pocket Balisongs? I have the Spyderco smallfly 2, it's fantastic. Mine is only a few months old. It really doesn't carry well in jeans because of the pocket clip but now switch out to a pair of sleep pants, it rides very well 🤷🏼‍♂️. So it mainly gets used around the house

@maxykus Жыл бұрын

Hi DCA, I have a question, long time ago I had a cheap kitchen knife set which has serrated slicer which was sharpened on both side of the blade. This knife was one of my favorite. Unfortunately this knife was lost and I tried to find a replacement and as of right now was not able to. All serrated kitchen knifes has been sharpened on one side of the blade. Do you know if anyone still made serrated kitchen knife sharpened on both side of the blade? Thanks in advance.

@MindOfMilton Жыл бұрын

The precision adjust elite is the play. I can sharpen all of my pocket knives with that unit.

@wolfmaster88 Жыл бұрын

Hi DCA, I recently lost my edc knife(benchmade north fork). I have also discovered a love for hunting. Can you suggest a finger safe edc folder and complimentary fixed blade to cover the task of field dressing animals, big and small? $400 combined budget. Thank you for your fun and informative videos.

@zackjones8681 Жыл бұрын

Might want to check the links. The one for the Shun Kanso Santoku isn't working properly.

@munozkidd8659 Жыл бұрын

Hey DCA, I’m looking for some examples of some micarta-handled slip-joint knives. Looking for some with a single blade and preferably under $100. I’ve looked around online but I’d like to hear some of your recommendations. Thanks!

@jeremyshackelford8080 Жыл бұрын

Anyone looking for a classy edc, without restrictions, should look at the exclusive CJRB Pyrite with the titanium bolster. I couldn't be more impressed with it, especially in its price range

@Mr.Big-Gunz Жыл бұрын

Hi David..i do ok on a 2x72 belt grinder, but i don't do well at all with the Lansky guide rod system, is the ken onion hard to use, and do you think i might like it.., I'm trying not to spend a large amount of money, and i want to try something better,, any advice will be appreciated thanx...

@ezequielikonikoff Жыл бұрын

Hello Mr. Anderson welcome back! Which one is your flipper knife with titanium handles?

@edinburgh1871 Жыл бұрын

Knife AQ Question: Hey DCA, Let's have a conversation on lube....whats the best lubricant for bearings vs washers? What are some good food safe options and where does grease come into play? Thanks in advance!

@PeterMinearo Жыл бұрын

Hey DCA, I have seen cases for storing a folding knife collection. But what about fixed blades? Is there a recommended case for fixed blades?

@Knifedope Жыл бұрын

Got damn!! How lucky you are to be friend of DCA! My man gifts some amazing 🎁

@edbrown7885 Жыл бұрын

Hi All from Western Australia 🇦🇺. I use a victorinox ranger for work along side a fallkniven Alx. My biggest problem is trying to keep it clean the ranger clean and free of dust and dirt and glueing up the locking blade. What is the best option for cleaning it all and what lubricant is best to apply. Congratulations on 300,000 subs. Thanks from Land of that's not a knife

@IchNixHabenUsername Жыл бұрын

CRK Mnandi. For me the one and only modern gentleman pocket knife.

@mb4498 Жыл бұрын

greetings from Poland, I'm a fam of the site

@bloozepicker Жыл бұрын

Small Sebenza 31 with Macassar Ebony is my choice for Gents carry.

@thejolliestroger6238 Жыл бұрын

Hey hey DCA, I'm looking for a very specific type of small game knife. Slip joint or non locking, finger choil (for safety), and the best steel for down and dirty work. Preferably under $100. Up to the challenge?

@Blawa-ti4xp Жыл бұрын

Hi David - I have a KniFAQ question for you. I drive a fuel tanker so I use my knife frequently. I currently carry a CRKT M16 EDC. I carry this bc it is lightweight and I can abuse it without having to cry like I would if I messed up one of my higher end knives. However, I find that it is somewhat underbuilt for some of the things I need to do - like cutting thick zip ties, rubber straps etc. Do you have any suggestions for lightweight yet robust folders that can tackle some of the heavier tasks but still carry well in the pocket and arent so heavy they pull my pants down?

@buffewo6386 Жыл бұрын

DCA, Gitano is Spanish for the Roma people, also called Gypsies. The form factor of the knife is reminiscent of the Spanish Navaja style of knives, with the wider clip-point blade and downward curved handle.

@Hypnotist501 Жыл бұрын

Hey DCA love the channel! I’m looking for a pocket fixed blade around $250 (not strictly) with a handle that somewhat fills the palm of my hand, would be cool if the handle was made from a nice looking wood and the blade be on the smaller side Thanks!

@TheGoodEarthFarmChannel Жыл бұрын

My wife and daughters carry various knives when working on the farm or in the woods, including neck knives, sheath knives, and folders. But apparently, some women's clothes they wear when dressing up don't have pockets. So they are looking for a way to carry discreetly, not a neck knife, but maybe something tucked in a waistband, so it must be slim and comfortable against the skin. Any ideas or other carry options we're not considering?

@mortaldemons11 Жыл бұрын

Hey DCA, my Uncle has carried a knife as long as I can remember. He used to carry a Gerber LST, but retired it a couple of years ago because he sharpened it down to nothing. Now he's been carrying "Gas Station Knives," each one worse than the last. I'd like to buy him something quality that he'll want to carry for Christmas. He likes carrying in his back pocket, (so slim with no clip), one hand opening, and something under $50. I was thinking a QSP, but I'm not sure if the Parrot is slim. Thanks for the help and Happy Holidays to you and Thomas.

@danielwendell542 Жыл бұрын

Buck 110 slim select or the inexpensive hunter versions would probably do the trick? And USA made if that's also a perk for you or yours. Kershaw Leek with the clip.removed also comes to mind. Good luck!

@Flowercontainer Жыл бұрын

The Spyderco Stretch k390 is about a perfect knife for me. Any other ideas that that compete with this magnum opus?

@jacoolivier Жыл бұрын

Hey DCA, any suggestions for a budget friendly (around 50 dollars or so) fidgety knife? Thanks

@olivercrosskey9030 Жыл бұрын

Hi what do you recommend for sharpening lots of different types of knives

@tarinindell8217 Жыл бұрын

Hey DCA! Im looking for a work knife to keep in my safety vest specifically to cut shrink wrap. Normally i prefer tough steels on blades with deep bellies, but they simply arent working for this task. I was eyeballing a hawkbill bladed knife but cant find any with good edge retention. Any suggestions?

@danielwendell542 Жыл бұрын

Cold Steel Tuff Lite or just the Tuff would probably work pretty well, and they have a pretty aggressive hawkbill blade shape on offer as well!

@eddiedailey2148 Жыл бұрын

What knife would you like to see made into a button lock I would like to see the civivi praxis both mini and full size

@Kevin-hj2mb Жыл бұрын

KnifeAQ question: DCA, thanks for fielding our questions. Why don't we see button or similar lock knives on washers? Am I missing any obvious options? Under $100 ideally. Thanks.

@kermitthepog7063 Жыл бұрын

Almost at 300k! Well done lads. Definitely bought a knife or two I first seen in these videos. Question: if you had £300 to spend on a celebratory knife to mark this occasion, what would it be?

@Nudel-nc1cp Жыл бұрын

Rike Alien 4

@tjsilverjones Жыл бұрын

Hey DCA, I'm trying to help my friend choose a new fixed blade for EDC and all around use and wondering if you could help me answer it? Here's the question he sent me, "I want a tough and rugged every day use kind of knife that will stay sharp enough to cut steak at dinner. Not like I'm going to be chopping trees down with it or anything but I want one that will stay relatively sharp but be tough when needed." I figured something around a 4" blade length for easy carry and in 3v or magnacut. I've suggested the Bradford knives catalog but wondering what you think? Thanks in advance.

@joebo3006 Жыл бұрын

Have a odd question. Should I buy the Boker micro tracker to replace my Bull Mastiff? I feel like I should have a fixed blade for the task of shaving off pencil size kindling form firewood. Did it once with my Mastiff it just felt weird using it for that job. What are you thoughts?

@joebo3006 Жыл бұрын

As a side note tracker seems to be on sale right now and it not to much more money for what I paid for my mastiff. So if I should upgrade (if the is the right way to think of it) which size do you think I should pick between the mini or micro?

@darthvaper6745 Жыл бұрын

Question - What's the multitool with the largest locking blade (that looks like a multitool and not a knife?

@The4cp Жыл бұрын

I'd also recommend either the We Banter or Baby Banter.

@macmccartney5760 Жыл бұрын

How do I change my blinker fluid? Thomas?

@codecrackerable Жыл бұрын

I recently got my hands on a giant mouse ace sonoma and I absolutely love it, but even after tuning the pivot and making sure it was centered nicely I still feel a bit of almost grittiness in the action when I close the blade slowly like it's rubbing against the micarta handles on the inside. Is there a way to smooth that up or is this just something these models deal with? Thanks!

@jdisdetermined Жыл бұрын

Did you disassemble and clean? Can you visually see the blade contacting the liner anytime as the blade drops? If it does, that’s your problem, loosen your screws and do the shim centering trick. If it’s not touching, how easy does the blade drop and how strong does the detent feel? Might be excessive lock bar tension, but on a linerlock that’s less likely. Otherwise it could just be the detent ball and bearings still wearing in a track. Keep fidgeting and see if it improves.

@alexanderdaamonkey Жыл бұрын

Yo DCA I just got a new job working at a warehouse, I cut saran wrap, tape, plastic straps, and cardboard throughout the day. I need a knife (not a box cutter) that can handle the work load & get abused and ALSO have a clip strong enough to be in and out of the pocket but not get pulled out accidentally when lifting and moving products around. Any help is appreciated 👍

@mugdays Жыл бұрын

What about the new Cold Steel benchtop sharpener? It's available on your website, but you haven't covered it in a video.

@michaelsweeney2763 Жыл бұрын

The SILAX is very similar to a 5 to 5 - 1/2 inch Santoku !

@lyncchoo Жыл бұрын

When you put a sharpmaker or gauntlet in the kitchen its for ease and a quick buff on the edge. Like a butcher processing meat they frequently buff up the edge of their knives. What rod do you leave in the sharpmaker? Is it the ceramic for a quick polish or something more coarse to shave metal? I suppose you just leave it out assembled and slice at it now and again? I can't maintain an angle on a stone. The sharpmaker has greatly improved my edges!

@knifecenter Жыл бұрын

Ceramic all the way. -DCA

@paulbasilio2457 Жыл бұрын

hi love, the show are there any places that will be able to ship your knife to or knives to sharpen them for you that won’t break the bank

@c.garison3770 Жыл бұрын

The ultimate "hand held" sharpening system that is idiot proof is the KME sharpener. It can easily be used without the stand and I have achieved some of my best results for a "fast and efficient" sharpening by holding the device. Now for those polished edged, you need the stand to play those games with this sharpening system. The WorkSharp Precision Adjust is a good, inexpensive attempt to copy the KME and served as my "gateway drug" into the world of high end sharpening. The precision adjust is still one of the tools I use to touch-up a blade, but it does not make the grade to be my principle sharpening system. Plus, unlike the KME, it is not hand held.

@abc456f Жыл бұрын

KME is great, but definitely can get pricey when you start optioning it out. I've probably got around $400 into mine by now. Extra stones, lapping films, kangaroo strop, rods for recurved and convex edges. It's like an addiction unto itself beyond the knife addiction. But I can't argue with the results. Whether I just want a decent toothy edge or go full out with a mirror polish, it delivers. I started with the Sharpmaker and got some mixed results. Upgraded to the Lansky and wasn't impressed with the hand held feature. I only use the KME with the stand, another $$ add on.

@desertratedc9596 Жыл бұрын

I know it's a competitor's knife but I like SMKWs copper and D2 Kershaw Culpepper. As far as modern traditionals go, I think it was a great introduction to the genre. As far as magnacut making other steels obsolete, I personally like tool steels and agree on 1095. 1095 is just awesome for hard-to-kill woods and yard work blades. Don't get me wrong, I really want a magnacut blade... really eyeing a Doug Ritter RSK Mk1 in magnacut. That is gonna be one of my hard-use and less babied knives. That being said, I am a sucker for CPM-M4, K390 and D2. I am currently also in love with Spy27 which is fairly stainless, has decent edge retention and is super easy to sharpen.

@Gelattoh Жыл бұрын

Got a link?

@desertratedc9596 Жыл бұрын

@@Gelattoh for the SMKW culpepper?

@Gelattoh Жыл бұрын

@@desertratedc9596 yessir!I was the one that asked the question in the vid. Does it have a pocket clip?

@desertratedc9596 Жыл бұрын

@Gelattoh sadly no but I have been carrying it in a scout style horizontal sheath with a lanyard to pull it out

@broadhead4311 Жыл бұрын

I have a few knives that have convex edges, that are a pain for me to sharpen on a whet stone or sharpening rod. Will any of the sharpeners shown in the video put a good edge on those. Or should I get something else?.

@daveyboy6985 Жыл бұрын

They are easy to keep sharp on a strop with some abrasive paste. If you let them get dull, its a bit of a skill to learn on a sharpening stone or diamond plate , there's a slight rocking motion required. Once you get the knack there easy. There definitely just for free hand sharpening.

@marcosvilardi2085 Жыл бұрын

That Gitano stole the show. Such a nice piece.

@tmutant Жыл бұрын

Hey DCA. Recently got a Joker Knife, and was wondering about other Spanish knives, mainly into folders but cool camping fixed blades are also of interest. Any recommendations? Under $150.

@danielwendell542 Жыл бұрын

I believe Muela is Spanish, and they have some nice knives for sale!

@emrehalitkoc7985 Жыл бұрын

Hey dca. What do you think about T5 steel?

@grovesy333 Жыл бұрын

I have both of these sharpening systems and they are perfect for someone like me in the uk that can’t carry a locking folder without good reason. You don’t even need to be a knife person to have and enjoy those sharpening systems in this video 😁

@SGCXD Жыл бұрын

What does a “good reason” mean to carry a locking folder in the uk? What are you “allowed” to carry for the basic reason of a knife being a useful tool? Do criminals respect the anti locking knife rule?

@grovesy333 Жыл бұрын

@@SGCXD To answer your question 3 inches or under none locking folders you’re allowed without good reason so like a Swiss Army knife or none locking keychain folders you’re allowed in public just as long as you ain’t being an idiot of course, Good reasons for any lock folder or fixed blade are if you use them for work, camping, fishing, hunting, using them in a demonstration KZfaq videos the list goes on. I could get into everything you’ve asked me but it’s a whole can of worms needless to say I have the precision adjust with the upgrade kit and the spyderco sharpmaker and they are fantastic systems most knives come at 20 degrees and under from the factory so very easy on both !

@SGCXD Жыл бұрын

@@grovesy333 sounds like a lot of unnecessary hassle for everyone that doesn’t act like an idiot in general. The sharpeners do look nice!

@grovesy333 Жыл бұрын

@@SGCXD I agree with you, the sharpeners are amazing and are quite budget as well you can sharpen a bk9 on the sharpmaker no problem !

@grovesy333 Жыл бұрын

@@SGCXD I just touched up my leatherman wave’s plain edge and serrated edge on the sharp maker and they are razor sharp now 😁

@neilsnyder7915 Жыл бұрын

Looking for a price no object 5” chefs knife with great edge retention.

@Cebuprince Жыл бұрын

I have been watching Mr Anderson for many years and he is fantastic, However I live in the Philippines in Cebu City to be exact and need to know can you ship items to the Philippines like your knife sharp sharpener and also can you send knives??

@sdr22630 Жыл бұрын

I have a carbon steel knife that has a discoloration on it. I was told that such a patina helps to protect the steel from corrosion. On the other hand some people like to keep a mirror finish on their blades. Which do you think is better?

@daveyboy6985 Жыл бұрын

I used to worry about my carbon blades getting stained , and definitely anoyoed if if rusted and got badly pitted. Now I force a partina on a new carbon blade, which helps protect against bad corrosion. I actually like the look of a patinaed blade, compared to a polished blade. 😊 Ps it's just about impossible to keep a carbon blade stain free, So don't worry about it, it doesn't matter.

@andrewkes3461 Жыл бұрын

Are there any crossbar lock knives in magnacut? Comparable steels to sharpening magnacut?

@Ericstraordinary Жыл бұрын

The new FRN-handled version of the Hogue Deka is in Magnacut. I only have one Magnacut knife and to me it feels fairly similar to sharpening 154CM.

@andyg9687 Жыл бұрын

Hey DCA. What's a interesting knife whose main purpose is to open Christmas presents & packages?

@jdisdetermined Жыл бұрын

I love the Rockwall, I just really wish they did a thinner full flat grind. The blade looks dated to me for some reason.

@amunnany Жыл бұрын

i'm an older woman who has little strength in my shoulders and arms. I'm looking for an automatic or flipper that opens easliy, is easy to carry on my belt or in my pockets (jacket or pants). Thanks

@arrowheadguys7637 Жыл бұрын

The Viper Hug is the best modern slipjoint for the money IMO.

@Gelattoh Жыл бұрын

I'm getting that one

@arrowheadguys7637 Жыл бұрын

@@Gelattoh great choice

@Gelattoh Жыл бұрын

It was me that asked the question too 😂

@arrowheadguys7637 Жыл бұрын

@@Gelattoh awesome, you won't regret it

@sbrunswick7043 Жыл бұрын

Hello from Alexandria! I just wanted to add that you cannot carry a concealed knife in DC, so deep carry pocket clips may not be a good idea.

@MSicko Жыл бұрын

Hey DCA . without getting too "weedy " , why do so many frame locks only have scales on one side. Please show some knives that have them on both.

@brianbrown4164 Жыл бұрын

DCA, could you recommend a lunch box knife? Something for cutting meats and cheeses maybe spreading a spread possibly spearing pickles or olives? Yuck olives…

@cheatobandito Жыл бұрын

Yo, slightly bigger than mediocre palms. Can you recommend some pocket blades or sharp items under $50 and are not Victorinox SAK's. I know they are great multitools for gifting but I'd like to make this question more challenging for you. Thank you DCA and Thomas for entertaining our knife community. Bonus question, Can Thomas recommend I reverse tanto knife under $50 as well.

@knifecenter Жыл бұрын

Buncha good stuff here: kzfaq.info/get/bejne/hb6SkrlouLDOkps.html

@michaelandrew8493 Жыл бұрын

Just got the sharpmaker because I never sharpened a knife before haha

@carbohydration Жыл бұрын

Hey David, I have a question: what is a knife that you think just oozes cool. From the sheath to the edge to the way you feel when using it. What's that knife that everyone will see and go "yeah, that's cool"?

@grovesy333 Жыл бұрын

I would say the crkt minimalist katana

@abc456f Жыл бұрын

Whenever I let non-knife people handle my Guardian Tactical recon 040, they all think it's super cool. OTF's in general will fire up folks who've never heard of or experienced one.

@davineggleston1701 Жыл бұрын

Tops steel eagle is super cool 😎

@WernerOving Жыл бұрын

Hi DCA, what's the best folding knife for making peanut butter sandwiches?

@empie001 Жыл бұрын

Hello DCA i'm looking for a "pocket prybar" aka edc fixed blade. it's going to be abused, prying apart wooden pallets and/or wooden crates. i've got a couple of candidates, Smith & wesson 24/7, schrade schf16 and regime, boker life knife and the crkt ramadi. the criteria are that they are not expensive but not cheaply made (under a 100), i'm not going to use a 300 dollar knife as a prybar. and like i said going to be used as prybars so strong tip. thick spine and ergonomic. besides the ones i mentioned i would like to hear some suggestions i might have not thought of🤔

@sbrunswick7043 Жыл бұрын

Take a look at the Ka-Bar Becker BK3 Tac Tool

@empie001 Жыл бұрын

@@sbrunswick7043 I should've included the length 😅. it would need to be around 10-13cm/4-5inch to be able to carry it around as edc and not to scare people by having a big knife on my side. So inside waistband or pocket carry orrrrr I'll even be open to horizontal carry for something larger

@mityjoeyoung8855 Жыл бұрын

I like the way Mr. Anderson fills out a pair of jeans lol kidding

@Gelattoh Жыл бұрын

Omg I can't believe yall answered my question! And the jokes were cracking me up 🤣 I am American and am from Washington. Small farming town. Thanks!!!

@traviscoombes3578 Жыл бұрын

Was talking to a co-worker about ZT and Benchmade being hard use folders. He claimed, ZT 's were better, but I feel that Benchmade makes a tougher knife, the new Adamas being the best example because of the Cruwear steel. I love ZT, but I don't feel they are as tough as Benchmade, what do you think?

@Nudel-nc1cp Жыл бұрын

There are at least 3 good reasons that Benchmade is better for hard work. 1. Axis lock is stronger than frame lock 2. Benchmade runs on washers so dirt is not a problem 3. Variety of steels to choose from where ZT's are mostly 20cv or s35vn

@waltski4375 Жыл бұрын

Am strongly considering the Spyderco system to sharpen a recurve blade. Does anyone have any experience/advice?

@grovesy333 Жыл бұрын

Use the corners of the stones if you’d got a dull recurve use the brown about 30 strokes per side then move to the white corners then repeat should be shaving sharp. Stropping is optional of course hope this helps ☺️☺️ use the 40 degrees by the way

@waltski4375 Жыл бұрын

@@grovesy333 Thanks!

@grovesy333 Жыл бұрын

@@waltski4375 You’re welcome and by the way you can take a really dull knife on the sharpmaker and bring it back to hair shaving sharp no problem even an s30v knife too the stones will cut any type of metal

@joshmcmanis5767 Жыл бұрын

A+ on this episode

@herwantoherwanto9074 Жыл бұрын

Hi knife faq... wish u all in good health.. i have a request if u guys dont mind... would u guys like to make a video about knife terms and their meaning? Like kinds of handles (macarta? Mcarta? I dunno the spelling, sorry) much appreciated for u guys respons.. warm and big hug for all of u and families...

@Pharto_Stinkus Жыл бұрын

KNIFEAQ QUESTION: Hello DCA, what's your "Best knife for anyone" (ala the Civivi Altus from a few videos ago), but USA made? Mine is the 14c28n Kershaw Blur (though technically it doesn't meet all YOUR criteria, it's a little long), I've recommended it countless times over the years.

@Mr-kn6uk Жыл бұрын

A sharp knife with a handle is the best knife for anyone. Did you like your own comment? I am not DCA.

@Mr-kn6uk Жыл бұрын

@@Pharto_Stinkus Sorry I for got we are in 2022 where all is love, all is equal, all is ❄. I liked this comment just for you, it will be my first and last like on my own comment.

@JulzFX Жыл бұрын

Hi DCA, maybe a stupid question answered before but : any good advice on how to store kitchen knives ? In a dedicated sheath, a dedicated drawer ? A magnetic wall stand, a wooden block? I´m getting sick having to resharpen my mother’s knives every week because she throw them with a lot of orher things inside kitchen’s drawers…(without talking about dishwasher… 🙄) Thx for your help, that can help save money not having to buy sharpening stones frequently 😂

@NMWanderings Жыл бұрын

Personally, I love my magnetic wall rack. I got a simple one sold by Mercer I believe, 24". It will hold about 15 knives, and has very strong magnets.

@CrimeVid Жыл бұрын

I use a magnetic knife rack because I don’t really have space for a knife block, BUT, you do have to be careful not to knock knives off by inaccurately grasping a knife handle. And too powerful a magnet is not the best idea either ! If you have space a knife block is good. A knife drawer with individual slots is not bad, but people often don’t put knives back every time they use them, and you end up with several knives lying around.

@knifecenter Жыл бұрын

Wall magnet with a wood surface so the blade doesn't touch the magnet itself is my preference. Easiest to clean that way and kinder if you bump the edge into it. -DCA