LOL, I was about to have a panic attack when I saw the hammering test.

Unrealistic speed test. You didn’t move the adjustment on the crescent wrench the wrong way, every single time, before making the right adjustment, only to find out you’ve now gone too far. You also didn’t drop the crescent wrench, then forget which way you have to move the adjuster and go the wrong way again.

The hammer test sold me on the Cresent

Every tool you own is a hammer at some point!

I have 2 pairs of pliers wrenches (7&10in) and I love them. However, we aren’t gonna shit on the adjustable (crescent). Don’t ever forget where ya came from!

THE ENDING WAS PERFECTION.

On a serious note, the pliers wrench takes slightly longer to adjust but if you have to do more than 2-3 turns in a cramped space it is night and day better

"anything is a 'hammer' if you swing it hard enough" - Someone, probably

I was like dude it's still brand new looking...not yet at least

The Knipex required 100% more hands to use.

Love the hammer test ...every tool should have a hammer on it

This is the best satire I've seen in a while

Ahhhh the old "whats closet to me at this moment is a hammer"

Each tool has its purpose if used properly.

Nearly panicked right there at the end lol

The knipex are perfect for brass as they dont damage it.

My heart stopped 😂

I have the pliers wrench in multiple sizes and is my favorite one, but after the cobra which is the most used one. Adjustable wrench is rarely used. But I always carry a hammer. In the past I used my pliers as a hammer and after that they were sticking and the rivet was damaged. So I learned a lesson.

I said “Ah he’ll no “ on your hammer test

This guy did a grip test on the complete opposite tools 🤣

Small skill issue with the pliers wrench. Once you get good at both of them the pliers wrench will always be much faster. But if you fumble it around then yeah it’ll be about the same speed.

Pipe wrench makes the perfect hammer

Test result: Tester as expected does not do actual work.

Love my pliers wrench, but have to admit I tried for ages to not use it as a hammer but last week I had no tools on the plot I was working close to hand apart from the knipex, I was lazy and it got used 🤣🤣

The ending was the best. I was “yes” do it

Lmao exactly. Cheap tools make great demolition tools. Don’t wanna hammer with quality of

Might loose clamp test but they make Vice grip locking Creasant wrenches

This is so stupid anyone in a real maintenance field and actually knows what their doing is either gona use a nut driver, socket etc to tighten it loosen fasteners in this fashion and i say maintenance because maintenance is a broad field ranging from a plumber electrical to industrial maintenance. If I got caught struggling or wasting time like this my department lead would probably question my IQ.

you need both

What about bending metal? What one wins? putting the jaws on metal and a pipe on the other end and giving it a go

Never used the pliers wrench but i feel needing two hands for it would suck. Then also not having a handy hammer.

Thanks

just bought the dewalt fencing plier,just to replace the hammering functions of my 400 mm knipex cobra🤣

Best hammers are the battery end of my Dewalt impact and my klein linesman. I know I know but idc. Its just so convenient lol.

Slightly misleading imo, Crescent brand adjustable wrenches are not the best, compared to a set of pliers from a pretty top tier brand doesn't exactly feel apples to apples to me.

I'm glad you can afford those hooray for you

Good video ❤

Now try a Bacho Adjustable against those pipe grips.

Crescent wrench every time, to break free tight stuff.

I'm sorry, were you using 2 hands with the pliers lmao

The crescent wrench was here 1st but both will do the same tighten nuts and bolts. The crescent for me more cause I don't own a pliers wrench.

I have a hard time making the leap and buying them...that being said when I do they will still definitely be used as a hammer 😂

You shoulda done the KNIPEX 98 07 250! haha

Gave me anxiety when he said hammer test😅

Yeah but the pliers wrench is here in my hand, and my hammer is in the toolbox way over there....

Everybody in the know knows the best hammer is the bottom of a battery attached to a drill (or any LI power tool)😏

😂 I use mine as a hammer when I get frustrated with shit

Idk. I don’t use my pliers wrench. It’s kinda annoying tbh. I’ll stick to a crescent wrench.

Knipex is it. Yeah bang with your hammer 😂

Haha I knew he was not using the knipex as a hammer hurts to much 🤦‍♂️🤣

When will you be reviewing nws pliers wrench????

In what application are you using these tools to put bolts/ screws / lags into or taking out of wood personally i use a impact

Someone still smart enough to know why he owns a hammer or 6.

Really bolts in wood

Hens legs vs shifter!!!

Üç cıvata için acelen ne birader? "Yavaş yap, sağlam yap."

Knipex is the best shit out there. Every chance I get I buy a knipex tool when I’m getting parts

Crescent wrench don't hold up to pliers wrench. I'll never probably buy another crescent wrench again now that I have almost all sizes Cobras and pliers wrenches.

Why didn't you hammer!?

Don't think knipex will be sending u anything... Cresent on the other hand, maybe

In this case 1 hand is better than 2!

All hand tools are hammers lol

Use those tools on bolts that are fastened into steel that are tightly secured. You were cheating with the knipex and not adjusting it to get maximum grip and torque. I bought one of these at work because of the hype. It takes more time to get optimal grip and torque i usually end up readjusting twice to get it on the right setting.

If you can't use it as a hammer for light duty on wood don't buy does plier

Crescent wins you spent more time fumbling with the Knipex.

About the same and it's not always good to go fast

Crescent wins every time

Everything becomes a hammer eventually. It's just a tool.. Now I get it! It's shiny and new, but wait a month...you ain't special lol

Dont use as hammer👍🏽

I hate the crescent wrench so much

10 dolar wrentch against 70 dolar plier...

Your using the crescent wrench backwards. Just saying

No good for zombie apocalypse...

Magic wrench will beats these two any day

but man you really need a tighten this up man your wrench wrenching abilities is not wrenchy enough everyone that's a wrencher that knows anything about wrenching nose this

Hammer 🔨 test: stupid test😅😅😅

Lol

Never buy the cresent adjustable. They're garbage. Buy an olsa tools 8 inch for $15 bucks. They have next to no jaw wobble, and they hold their size.

Crescent still has its purpose

Also, what numbskull uses a wrench in a socket scenario😅

If ya can't use it as a hammer then they aren't worth using.. lmfao...

if youre using a pliers wrench as a hammer, you dont have enough tools. lol id rather use a rock

Adjustable Wrench! Crescent a Brand. 😑

Neither

It’s not a measuring tool lol smack the duck outta it

I got a better one it's called an impact gun

Neither tool should ever be used for bolts outside of emergencies. Save yourself a headache and use the right tool for the job. Ffa

Okay so we just not gonna use a proper tool at all?

Lol