#sscje #mechanical #gearinstitute
Click here to download our app
edumartin.page.link/jLFr
Join telegram channel
t.me/gearinstitute
JE की तयारी के लिए App Download करें
edumartin.page.link/jLFr
Join our whats app channel
whatsapp.com/channel/0029VaCP...
ALL IN 1 AE/JE EXAM LIVE CLASSES (TECHNICAL +NON TECHNICAL) (1 YEAR VALDITY)
bit.ly/3FOEcme
ALL IN 1 AE/JE EXAM LIVE CLASSES (TECHNICAL +NON TECHNICAL) (2 YEAR VALDITY)
bit.ly/3uPICTG
ALL IN 1 AE/JE EXAM LIVE CLASSES (TECHNICAL ONLY) (1Year Validity)
bit.ly/3ZR9Pne
ALL IN 1 AE/JE EXAM LIVE CLASSES (TECHNICAL ONLY) (2Year Validity)
bit.ly/3O6sndO
SSC JE RECORDED COURSE (2YEAR VALIDITY).
bit.ly/3CSOuzH
SSC JE RECORDED COURSE (1YEAR VALDITY)
bit.ly/3W9LVjv
Mechanical MCQ Book written by Er.Harvinder Singh
Order your copy click here
bit.ly/MCQBOOK
Strength of material Full Syllabus
bit.ly/38jyEBX
Fluid Mechanics Full Syllabus
bit.ly/3uNsG3z
Theory of machine Full Syllabus
bit.ly/3xRPQJk
Thermodynamics Full Syllabus
bit.ly/3k7lXws
Material Science full syllabus
bit.ly/38pU5Bf
Machine Design Full Syllabus
bit.ly/3k7lr1u
Automobile Engineering Full Syllabus
bit.ly/3wMMm8S
Refrigeration and air conditioning Full Syllabus
bit.ly/3Q2tHyy
Power plant engineering
bit.ly/3kGoj9v
Workshop Technology
bit.ly/3QGsNIo
Industrial Engineering
bit.ly/3vvyyjq
8.1 Introduction
Knuckle joint is used to connect two rods subjected to axial tensile loads. It may also be used to support the compressive load if the joint is guided. It is not suitable to connect rotating shafts which transmit torque. Axes of the shafts to be joined should lie in the same plane and may coincide or intersect. Its construction permits limited relative angular movement between rods, about the axis of the pin. Knuckle joint is widely used to connect valve rod and eccentric rod, in the link of a cycle chain, levers, tie rod joint for roof truss and many other links.
Knuckle Joint has mainly three components - eye, fork and pin as shown in Figure 8.1. Eye is formed on one of the rods and fork is formed on the other. Eye fits inside the fork and the pin is passed through both the fork and the eye. This pin is secured in its place by means of a split-pin. The ends of the rods are made octagonal to some distance for better grip and are made square for some portion before it is forged to make the eye and fork shapes.
Advantages of Knuckle Joint are:
- Simple to design and manufacture.
- Fewer parts - less cost more reliability.
- Simple to assemble and dismantle.
knuckle joint application
knuckle joint ppt
best material for knuckle joint
case study on knuckle joint
design of sleeve and cotter joint
difference between knuckle and cotter joint
What type of joint is a knuckle joint?
A knuckle joint is a mechanical joint used to connect two rods which are under a tensile load, when there is a requirement of small amount of flexibility, or angular moment is necessary. There is always axial or linear line of action of load.
What type of joint is a knuckle joint?
A knuckle joint is a mechanical joint used to connect two rods which are under a tensile load, when there is a requirement of small amount of flexibility, or angular moment is necessary. There is always axial or linear line of action of load.
Where is the knuckle joint used?
Knuckle joint is used for connecting two rods whose axes either coincide or intersect and lies in one plane only. They are widely used in tractor trailer, tie rod in roof truss, joint between the links of suspension bridge and also used in steering system in between the steering rod and pinion of the steering gear.
knuckle joint application
knuckle joint pdf
knuckle joint example
knuckle joint ppt
cotter joint
knuckle joint diagram
knuckle joint parts
design a knuckle joint to transmit 150 kn
knuckle joint design procedure,knuckle joint design problem,knuckle joint design ppt,design of knuckle joint,design of knuckle joint in hindi,design of knuckle joint problems,gear institute,knuckle joint failure animation,knuckle joint failure,how to design knuckle joint
Design Procedure of Knuckle Joint || Design of Machine || Machine Design